Newer
Older
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
/*
* Based on meson_uart.c, by AMLOGIC, INC.
*
* Copyright (C) 2014 Carlo Caione <carlo@caione.org>
*
* This program is free software; you can redistribute it and/or modify it
* under the terms of the GNU General Public License version 2 as published
* by the Free Software Foundation.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
*/
#include <linux/clk.h>
#include <linux/console.h>
#include <linux/delay.h>
#include <linux/init.h>
#include <linux/io.h>
#include <linux/module.h>
#include <linux/kernel.h>
#include <linux/of.h>
#include <linux/platform_device.h>
#include <linux/serial.h>
#include <linux/serial_core.h>
#include <linux/tty.h>
#include <linux/tty_flip.h>
/* Register offsets */
#define AML_UART_WFIFO 0x00
#define AML_UART_RFIFO 0x04
#define AML_UART_CONTROL 0x08
#define AML_UART_STATUS 0x0c
#define AML_UART_MISC 0x10
#define AML_UART_REG5 0x14
/* AML_UART_CONTROL bits */
#define AML_UART_TX_EN BIT(12)
#define AML_UART_RX_EN BIT(13)
#define AML_UART_TX_RST BIT(22)
#define AML_UART_RX_RST BIT(23)
#define AML_UART_CLR_ERR BIT(24)
#define AML_UART_RX_INT_EN BIT(27)
#define AML_UART_TX_INT_EN BIT(28)
#define AML_UART_DATA_LEN_MASK (0x03 << 20)
#define AML_UART_DATA_LEN_8BIT (0x00 << 20)
#define AML_UART_DATA_LEN_7BIT (0x01 << 20)
#define AML_UART_DATA_LEN_6BIT (0x02 << 20)
#define AML_UART_DATA_LEN_5BIT (0x03 << 20)
/* AML_UART_STATUS bits */
#define AML_UART_PARITY_ERR BIT(16)
#define AML_UART_FRAME_ERR BIT(17)
#define AML_UART_TX_FIFO_WERR BIT(18)
#define AML_UART_RX_EMPTY BIT(20)
#define AML_UART_TX_FULL BIT(21)
#define AML_UART_TX_EMPTY BIT(22)
#define AML_UART_XMIT_BUSY BIT(25)
#define AML_UART_ERR (AML_UART_PARITY_ERR | \
AML_UART_FRAME_ERR | \
AML_UART_TX_FIFO_WERR)
/* AML_UART_CONTROL bits */
#define AML_UART_TWO_WIRE_EN BIT(15)
#define AML_UART_PARITY_TYPE BIT(18)
#define AML_UART_PARITY_EN BIT(19)
#define AML_UART_CLEAR_ERR BIT(24)
#define AML_UART_STOP_BIN_LEN_MASK (0x03 << 16)
#define AML_UART_STOP_BIN_1SB (0x00 << 16)
#define AML_UART_STOP_BIN_2SB (0x01 << 16)
/* AML_UART_MISC bits */
#define AML_UART_XMIT_IRQ(c) (((c) & 0xff) << 8)
#define AML_UART_RECV_IRQ(c) ((c) & 0xff)
/* AML_UART_REG5 bits */
#define AML_UART_BAUD_MASK 0x7fffff
#define AML_UART_BAUD_USE BIT(23)
#define AML_UART_BAUD_XTAL BIT(24)
#define AML_UART_PORT_NUM 6
#define AML_UART_DEV_NAME "ttyAML"
static struct uart_driver meson_uart_driver;
static struct uart_port *meson_ports[AML_UART_PORT_NUM];
static void meson_uart_set_mctrl(struct uart_port *port, unsigned int mctrl)
{
}
static unsigned int meson_uart_get_mctrl(struct uart_port *port)
{
return TIOCM_CTS;
}
static unsigned int meson_uart_tx_empty(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_STATUS);
val &= (AML_UART_TX_EMPTY | AML_UART_XMIT_BUSY);
return (val == AML_UART_TX_EMPTY) ? TIOCSER_TEMT : 0;
}
static void meson_uart_stop_tx(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_CONTROL);
writel(val, port->membase + AML_UART_CONTROL);
}
static void meson_uart_stop_rx(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_CONTROL);
val &= ~AML_UART_RX_EN;
writel(val, port->membase + AML_UART_CONTROL);
}
static void meson_uart_shutdown(struct uart_port *port)
{
unsigned long flags;
u32 val;
free_irq(port->irq, port);
spin_lock_irqsave(&port->lock, flags);
val = readl(port->membase + AML_UART_CONTROL);
val &= ~(AML_UART_RX_INT_EN | AML_UART_TX_INT_EN);
writel(val, port->membase + AML_UART_CONTROL);
spin_unlock_irqrestore(&port->lock, flags);
}
static void meson_uart_start_tx(struct uart_port *port)
{
struct circ_buf *xmit = &port->state->xmit;
unsigned int ch;
if (uart_tx_stopped(port)) {
meson_uart_stop_tx(port);
return;
}
while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) {
if (port->x_char) {
writel(port->x_char, port->membase + AML_UART_WFIFO);
port->icount.tx++;
port->x_char = 0;
continue;
}
if (uart_circ_empty(xmit))
break;
ch = xmit->buf[xmit->tail];
writel(ch, port->membase + AML_UART_WFIFO);
xmit->tail = (xmit->tail+1) & (SERIAL_XMIT_SIZE - 1);
port->icount.tx++;
}
if (!uart_circ_empty(xmit)) {
val = readl(port->membase + AML_UART_CONTROL);
val |= AML_UART_TX_INT_EN;
writel(val, port->membase + AML_UART_CONTROL);
}
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
237
238
239
240
if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
uart_write_wakeup(port);
}
static void meson_receive_chars(struct uart_port *port)
{
struct tty_port *tport = &port->state->port;
char flag;
u32 status, ch, mode;
do {
flag = TTY_NORMAL;
port->icount.rx++;
status = readl(port->membase + AML_UART_STATUS);
if (status & AML_UART_ERR) {
if (status & AML_UART_TX_FIFO_WERR)
port->icount.overrun++;
else if (status & AML_UART_FRAME_ERR)
port->icount.frame++;
else if (status & AML_UART_PARITY_ERR)
port->icount.frame++;
mode = readl(port->membase + AML_UART_CONTROL);
mode |= AML_UART_CLEAR_ERR;
writel(mode, port->membase + AML_UART_CONTROL);
/* It doesn't clear to 0 automatically */
mode &= ~AML_UART_CLEAR_ERR;
writel(mode, port->membase + AML_UART_CONTROL);
status &= port->read_status_mask;
if (status & AML_UART_FRAME_ERR)
flag = TTY_FRAME;
else if (status & AML_UART_PARITY_ERR)
flag = TTY_PARITY;
}
ch = readl(port->membase + AML_UART_RFIFO);
ch &= 0xff;
if ((status & port->ignore_status_mask) == 0)
tty_insert_flip_char(tport, ch, flag);
if (status & AML_UART_TX_FIFO_WERR)
tty_insert_flip_char(tport, 0, TTY_OVERRUN);
} while (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY));
spin_unlock(&port->lock);
tty_flip_buffer_push(tport);
spin_lock(&port->lock);
}
static irqreturn_t meson_uart_interrupt(int irq, void *dev_id)
{
struct uart_port *port = (struct uart_port *)dev_id;
spin_lock(&port->lock);
if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_RX_EMPTY))
meson_receive_chars(port);
if (!(readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)) {
if (readl(port->membase + AML_UART_CONTROL) & AML_UART_TX_INT_EN)
meson_uart_start_tx(port);
}
spin_unlock(&port->lock);
return IRQ_HANDLED;
}
static const char *meson_uart_type(struct uart_port *port)
{
return (port->type == PORT_MESON) ? "meson_uart" : NULL;
}
static void meson_uart_reset(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_CONTROL);
val |= (AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR);
writel(val, port->membase + AML_UART_CONTROL);
val &= ~(AML_UART_RX_RST | AML_UART_TX_RST | AML_UART_CLR_ERR);
writel(val, port->membase + AML_UART_CONTROL);
}
static int meson_uart_startup(struct uart_port *port)
{
u32 val;
int ret = 0;
val = readl(port->membase + AML_UART_CONTROL);
val |= AML_UART_CLR_ERR;
writel(val, port->membase + AML_UART_CONTROL);
val &= ~AML_UART_CLR_ERR;
writel(val, port->membase + AML_UART_CONTROL);
val |= (AML_UART_RX_EN | AML_UART_TX_EN);
writel(val, port->membase + AML_UART_CONTROL);
val |= (AML_UART_RX_INT_EN | AML_UART_TX_INT_EN);
writel(val, port->membase + AML_UART_CONTROL);
val = (AML_UART_RECV_IRQ(1) | AML_UART_XMIT_IRQ(port->fifosize / 2));
writel(val, port->membase + AML_UART_MISC);
ret = request_irq(port->irq, meson_uart_interrupt, 0,
port->name, port);
return ret;
}
static void meson_uart_change_speed(struct uart_port *port, unsigned long baud)
{
u32 val;
while (!meson_uart_tx_empty(port))
if (port->uartclk == 24000000) {
val = ((port->uartclk / 3) / baud) - 1;
val |= AML_UART_BAUD_XTAL;
} else {
val = ((port->uartclk * 10 / (baud * 4) + 5) / 10) - 1;
}
307
308
309
310
311
312
313
314
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
val |= AML_UART_BAUD_USE;
writel(val, port->membase + AML_UART_REG5);
}
static void meson_uart_set_termios(struct uart_port *port,
struct ktermios *termios,
struct ktermios *old)
{
unsigned int cflags, iflags, baud;
unsigned long flags;
u32 val;
spin_lock_irqsave(&port->lock, flags);
cflags = termios->c_cflag;
iflags = termios->c_iflag;
val = readl(port->membase + AML_UART_CONTROL);
val &= ~AML_UART_DATA_LEN_MASK;
switch (cflags & CSIZE) {
case CS8:
val |= AML_UART_DATA_LEN_8BIT;
break;
case CS7:
val |= AML_UART_DATA_LEN_7BIT;
break;
case CS6:
val |= AML_UART_DATA_LEN_6BIT;
break;
case CS5:
val |= AML_UART_DATA_LEN_5BIT;
break;
}
if (cflags & PARENB)
val |= AML_UART_PARITY_EN;
else
val &= ~AML_UART_PARITY_EN;
if (cflags & PARODD)
val |= AML_UART_PARITY_TYPE;
else
val &= ~AML_UART_PARITY_TYPE;
val &= ~AML_UART_STOP_BIN_LEN_MASK;
if (cflags & CSTOPB)
val |= AML_UART_STOP_BIN_2SB;
else
val |= AML_UART_STOP_BIN_1SB;
if (cflags & CRTSCTS)
val &= ~AML_UART_TWO_WIRE_EN;
else
val |= AML_UART_TWO_WIRE_EN;
writel(val, port->membase + AML_UART_CONTROL);
baud = uart_get_baud_rate(port, termios, old, 9600, 4000000);
366
367
368
369
370
371
372
373
374
375
376
377
378
379
380
381
382
383
384
385
386
387
388
389
390
391
392
393
394
395
396
397
meson_uart_change_speed(port, baud);
port->read_status_mask = AML_UART_TX_FIFO_WERR;
if (iflags & INPCK)
port->read_status_mask |= AML_UART_PARITY_ERR |
AML_UART_FRAME_ERR;
port->ignore_status_mask = 0;
if (iflags & IGNPAR)
port->ignore_status_mask |= AML_UART_PARITY_ERR |
AML_UART_FRAME_ERR;
uart_update_timeout(port, termios->c_cflag, baud);
spin_unlock_irqrestore(&port->lock, flags);
}
static int meson_uart_verify_port(struct uart_port *port,
struct serial_struct *ser)
{
int ret = 0;
if (port->type != PORT_MESON)
ret = -EINVAL;
if (port->irq != ser->irq)
ret = -EINVAL;
if (ser->baud_base < 9600)
ret = -EINVAL;
return ret;
}
static void meson_uart_release_port(struct uart_port *port)
{
devm_iounmap(port->dev, port->membase);
port->membase = NULL;
devm_release_mem_region(port->dev, port->mapbase, port->mapsize);
}
static int meson_uart_request_port(struct uart_port *port)
{
if (!devm_request_mem_region(port->dev, port->mapbase, port->mapsize,
dev_name(port->dev))) {
dev_err(port->dev, "Memory region busy\n");
return -EBUSY;
}
port->membase = devm_ioremap_nocache(port->dev, port->mapbase,
port->mapsize);
if (!port->membase)
return -ENOMEM;
415
416
417
418
419
420
421
422
423
424
425
426
427
428
429
430
431
432
433
434
435
436
437
438
439
440
441
442
443
444
return 0;
}
static void meson_uart_config_port(struct uart_port *port, int flags)
{
if (flags & UART_CONFIG_TYPE) {
port->type = PORT_MESON;
meson_uart_request_port(port);
}
}
static struct uart_ops meson_uart_ops = {
.set_mctrl = meson_uart_set_mctrl,
.get_mctrl = meson_uart_get_mctrl,
.tx_empty = meson_uart_tx_empty,
.start_tx = meson_uart_start_tx,
.stop_tx = meson_uart_stop_tx,
.stop_rx = meson_uart_stop_rx,
.startup = meson_uart_startup,
.shutdown = meson_uart_shutdown,
.set_termios = meson_uart_set_termios,
.type = meson_uart_type,
.config_port = meson_uart_config_port,
.request_port = meson_uart_request_port,
.release_port = meson_uart_release_port,
.verify_port = meson_uart_verify_port,
};
#ifdef CONFIG_SERIAL_MESON_CONSOLE
static void meson_uart_enable_tx_engine(struct uart_port *port)
{
u32 val;
val = readl(port->membase + AML_UART_CONTROL);
val |= AML_UART_TX_EN;
writel(val, port->membase + AML_UART_CONTROL);
}
static void meson_console_putchar(struct uart_port *port, int ch)
{
if (!port->membase)
return;
while (readl(port->membase + AML_UART_STATUS) & AML_UART_TX_FULL)
cpu_relax();
writel(ch, port->membase + AML_UART_WFIFO);
}
static void meson_serial_port_write(struct uart_port *port, const char *s,
u_int count)
{
unsigned long flags;
int locked;
local_irq_save(flags);
if (port->sysrq) {
locked = 0;
} else if (oops_in_progress) {
locked = spin_trylock(&port->lock);
} else {
spin_lock(&port->lock);
locked = 1;
}
val = readl(port->membase + AML_UART_CONTROL);
tmp = val & ~(AML_UART_TX_INT_EN | AML_UART_RX_INT_EN);
writel(tmp, port->membase + AML_UART_CONTROL);
uart_console_write(port, s, count, meson_console_putchar);
writel(val, port->membase + AML_UART_CONTROL);
if (locked)
spin_unlock(&port->lock);
local_irq_restore(flags);
}
static void meson_serial_console_write(struct console *co, const char *s,
u_int count)
{
struct uart_port *port;
port = meson_ports[co->index];
if (!port)
return;
meson_serial_port_write(port, s, count);
}
static int meson_serial_console_setup(struct console *co, char *options)
{
struct uart_port *port;
int baud = 115200;
int bits = 8;
int parity = 'n';
int flow = 'n';
if (co->index < 0 || co->index >= AML_UART_PORT_NUM)
return -EINVAL;
port = meson_ports[co->index];
if (!port || !port->membase)
return -ENODEV;
Heiner Kallweit
committed
meson_uart_enable_tx_engine(port);
if (options)
uart_parse_options(options, &baud, &parity, &bits, &flow);
return uart_set_options(port, co, baud, parity, bits, flow);
}
static struct console meson_serial_console = {
.name = AML_UART_DEV_NAME,
.write = meson_serial_console_write,
.device = uart_console_device,
.setup = meson_serial_console_setup,
.flags = CON_PRINTBUFFER,
.index = -1,
.data = &meson_uart_driver,
};
static int __init meson_serial_console_init(void)
{
register_console(&meson_serial_console);
return 0;
}
console_initcall(meson_serial_console_init);
static void meson_serial_early_console_write(struct console *co,
const char *s,
u_int count)
{
struct earlycon_device *dev = co->data;
meson_serial_port_write(&dev->port, s, count);
}
static int __init
meson_serial_early_console_setup(struct earlycon_device *device, const char *opt)
{
if (!device->port.membase)
return -ENODEV;
Heiner Kallweit
committed
meson_uart_enable_tx_engine(&device->port);
device->con->write = meson_serial_early_console_write;
return 0;
}
/* Legacy bindings, should be removed when no more used */
OF_EARLYCON_DECLARE(meson, "amlogic,meson-uart",
meson_serial_early_console_setup);
/* Stable bindings */
OF_EARLYCON_DECLARE(meson, "amlogic,meson-ao-uart",
meson_serial_early_console_setup);
#define MESON_SERIAL_CONSOLE (&meson_serial_console)
#else
#define MESON_SERIAL_CONSOLE NULL
#endif
static struct uart_driver meson_uart_driver = {
.owner = THIS_MODULE,
.driver_name = "meson_uart",
.dev_name = AML_UART_DEV_NAME,
.nr = AML_UART_PORT_NUM,
.cons = MESON_SERIAL_CONSOLE,
};
584
585
586
587
588
589
590
591
592
593
594
595
596
597
598
599
600
601
602
603
604
605
606
607
608
609
610
611
612
613
614
615
616
617
618
619
620
621
622
623
624
625
626
627
628
629
630
631
632
633
634
635
636
637
638
639
640
641
642
643
644
645
646
647
648
649
static inline struct clk *meson_uart_probe_clock(struct device *dev,
const char *id)
{
struct clk *clk = NULL;
int ret;
clk = devm_clk_get(dev, id);
if (IS_ERR(clk))
return clk;
ret = clk_prepare_enable(clk);
if (ret) {
dev_err(dev, "couldn't enable clk\n");
return ERR_PTR(ret);
}
devm_add_action_or_reset(dev,
(void(*)(void *))clk_disable_unprepare,
clk);
return clk;
}
/*
* This function gets clocks in the legacy non-stable DT bindings.
* This code will be remove once all the platforms switch to the
* new DT bindings.
*/
static int meson_uart_probe_clocks_legacy(struct platform_device *pdev,
struct uart_port *port)
{
struct clk *clk = NULL;
clk = meson_uart_probe_clock(&pdev->dev, NULL);
if (IS_ERR(clk))
return PTR_ERR(clk);
port->uartclk = clk_get_rate(clk);
return 0;
}
static int meson_uart_probe_clocks(struct platform_device *pdev,
struct uart_port *port)
{
struct clk *clk_xtal = NULL;
struct clk *clk_pclk = NULL;
struct clk *clk_baud = NULL;
clk_pclk = meson_uart_probe_clock(&pdev->dev, "pclk");
if (IS_ERR(clk_pclk))
return PTR_ERR(clk_pclk);
clk_xtal = meson_uart_probe_clock(&pdev->dev, "xtal");
if (IS_ERR(clk_xtal))
return PTR_ERR(clk_xtal);
clk_baud = meson_uart_probe_clock(&pdev->dev, "baud");
if (IS_ERR(clk_baud))
return PTR_ERR(clk_baud);
port->uartclk = clk_get_rate(clk_baud);
return 0;
}
650
651
652
653
654
655
656
657
658
659
660
661
662
663
664
665
666
667
668
669
670
671
672
673
674
675
676
677
678
static int meson_uart_probe(struct platform_device *pdev)
{
struct resource *res_mem, *res_irq;
struct uart_port *port;
int ret = 0;
if (pdev->dev.of_node)
pdev->id = of_alias_get_id(pdev->dev.of_node, "serial");
if (pdev->id < 0 || pdev->id >= AML_UART_PORT_NUM)
return -EINVAL;
res_mem = platform_get_resource(pdev, IORESOURCE_MEM, 0);
if (!res_mem)
return -ENODEV;
res_irq = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
if (!res_irq)
return -ENODEV;
if (meson_ports[pdev->id]) {
dev_err(&pdev->dev, "port %d already allocated\n", pdev->id);
return -EBUSY;
}
port = devm_kzalloc(&pdev->dev, sizeof(struct uart_port), GFP_KERNEL);
if (!port)
return -ENOMEM;
/* Use legacy way until all platforms switch to new bindings */
if (of_device_is_compatible(pdev->dev.of_node, "amlogic,meson-uart"))
ret = meson_uart_probe_clocks_legacy(pdev, port);
else
ret = meson_uart_probe_clocks(pdev, port);
if (ret)
return ret;
port->iotype = UPIO_MEM;
port->mapbase = res_mem->start;
port->mapsize = resource_size(res_mem);
port->irq = res_irq->start;
port->flags = UPF_BOOT_AUTOCONF | UPF_LOW_LATENCY;
port->dev = &pdev->dev;
port->line = pdev->id;
port->type = PORT_MESON;
port->x_char = 0;
port->ops = &meson_uart_ops;
port->fifosize = 64;
meson_ports[pdev->id] = port;
platform_set_drvdata(pdev, port);
/* reset port before registering (and possibly registering console) */
if (meson_uart_request_port(port) >= 0) {
meson_uart_reset(port);
meson_uart_release_port(port);
}
ret = uart_add_one_port(&meson_uart_driver, port);
if (ret)
meson_ports[pdev->id] = NULL;
return ret;
}
static int meson_uart_remove(struct platform_device *pdev)
{
struct uart_port *port;
port = platform_get_drvdata(pdev);
uart_remove_one_port(&meson_uart_driver, port);
meson_ports[pdev->id] = NULL;
return 0;
}
static const struct of_device_id meson_uart_dt_match[] = {
/* Legacy bindings, should be removed when no more used */
{ .compatible = "amlogic,meson-uart" },
/* Stable bindings */
{ .compatible = "amlogic,meson6-uart" },
{ .compatible = "amlogic,meson8-uart" },
{ .compatible = "amlogic,meson8b-uart" },
{ .compatible = "amlogic,meson-gx-uart" },
735
736
737
738
739
740
741
742
743
744
745
746
747
748
749
750
751
752
753
754
755
756
757
758
759
760
761
762
763
764
765
766
767
768
769
770
771
772
773
774
{ /* sentinel */ },
};
MODULE_DEVICE_TABLE(of, meson_uart_dt_match);
static struct platform_driver meson_uart_platform_driver = {
.probe = meson_uart_probe,
.remove = meson_uart_remove,
.driver = {
.name = "meson_uart",
.of_match_table = meson_uart_dt_match,
},
};
static int __init meson_uart_init(void)
{
int ret;
ret = uart_register_driver(&meson_uart_driver);
if (ret)
return ret;
ret = platform_driver_register(&meson_uart_platform_driver);
if (ret)
uart_unregister_driver(&meson_uart_driver);
return ret;
}
static void __exit meson_uart_exit(void)
{
platform_driver_unregister(&meson_uart_platform_driver);
uart_unregister_driver(&meson_uart_driver);
}
module_init(meson_uart_init);
module_exit(meson_uart_exit);
MODULE_AUTHOR("Carlo Caione <carlo@caione.org>");
MODULE_DESCRIPTION("Amlogic Meson serial port driver");
MODULE_LICENSE("GPL v2");