mtip32xx.c

/*
 * Driver for the Micron P320 SSD
 *   Copyright (C) 2011 Micron Technology, Inc.
 *
 * Portions of this code were derived from works subjected to the
 * following copyright:
 *    Copyright (C) 2009 Integrated Device Technology, Inc.
 *
 * This program is free software; you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation; either version 2 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 */

#include <linux/pci.h>
#include <linux/interrupt.h>
#include <linux/ata.h>
#include <linux/delay.h>
#include <linux/hdreg.h>
#include <linux/uaccess.h>
#include <linux/random.h>
#include <linux/smp.h>
#include <linux/compat.h>
#include <linux/fs.h>
#include <linux/module.h>
#include <linux/genhd.h>
#include <linux/blkdev.h>
#include <linux/bio.h>
#include <linux/dma-mapping.h>
#include <linux/idr.h>
#include <../drivers/ata/ahci.h>
#include "mtip32xx.h"

#define HW_CMD_SLOT_SZ		(MTIP_MAX_COMMAND_SLOTS * 32)
#define HW_CMD_TBL_SZ		(AHCI_CMD_TBL_HDR_SZ + (MTIP_MAX_SG * 16))
#define HW_CMD_TBL_AR_SZ	(HW_CMD_TBL_SZ * MTIP_MAX_COMMAND_SLOTS)
#define HW_PORT_PRIV_DMA_SZ \
		(HW_CMD_SLOT_SZ + HW_CMD_TBL_AR_SZ + AHCI_RX_FIS_SZ)

#define HOST_HSORG		0xFC
#define HSORG_DISABLE_SLOTGRP_INTR (1<<24)
#define HSORG_DISABLE_SLOTGRP_PXIS (1<<16)
#define HSORG_HWREV		0xFF00
#define HSORG_STYLE		0x8
#define HSORG_SLOTGROUPS	0x7

#define PORT_COMMAND_ISSUE	0x38
#define PORT_SDBV		0x7C

#define PORT_OFFSET		0x100
#define PORT_MEM_SIZE		0x80

#define PORT_IRQ_ERR \
	(PORT_IRQ_HBUS_ERR | PORT_IRQ_IF_ERR | PORT_IRQ_CONNECT | \
	 PORT_IRQ_PHYRDY | PORT_IRQ_UNK_FIS | PORT_IRQ_BAD_PMP | \
	 PORT_IRQ_TF_ERR | PORT_IRQ_HBUS_DATA_ERR | PORT_IRQ_IF_NONFATAL | \
	 PORT_IRQ_OVERFLOW)
#define PORT_IRQ_LEGACY \
	(PORT_IRQ_PIOS_FIS | PORT_IRQ_D2H_REG_FIS)
#define PORT_IRQ_HANDLED \
	(PORT_IRQ_SDB_FIS | PORT_IRQ_LEGACY | \
	 PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR | \
	 PORT_IRQ_CONNECT | PORT_IRQ_PHYRDY)
#define DEF_PORT_IRQ \
	(PORT_IRQ_ERR | PORT_IRQ_LEGACY | PORT_IRQ_SDB_FIS)

/* product numbers */
#define MTIP_PRODUCT_UNKNOWN	0x00
#define MTIP_PRODUCT_ASICFPGA	0x11

/* Device instance number, incremented each time a device is probed. */
static int instance;

/*
 * Global variable used to hold the major block device number
 * allocated in mtip_init().
 */
static int mtip_major;

static DEFINE_SPINLOCK(rssd_index_lock);
static DEFINE_IDA(rssd_index_ida);

#ifdef CONFIG_COMPAT
struct mtip_compat_ide_task_request_s {
	__u8		io_ports[8];
	__u8		hob_ports[8];
	ide_reg_valid_t	out_flags;
	ide_reg_valid_t	in_flags;
	int		data_phase;
	int		req_cmd;
	compat_ulong_t	out_size;
	compat_ulong_t	in_size;
};
#endif

static int mtip_exec_internal_command(struct mtip_port *port,
				void *fis,
				int fisLen,
				dma_addr_t buffer,
				int bufLen,
				u32 opts,
				gfp_t atomic,
				unsigned long timeout);

/*
 * This function check_for_surprise_removal is called
 * while card is removed from the system and it will
 * read the vendor id from the configration space
 *
 * @pdev Pointer to the pci_dev structure.
 *
 * return value
 *	 true if device removed, else false
 */
static bool mtip_check_surprise_removal(struct pci_dev *pdev)
{
	u16 vendor_id = 0;

       /* Read the vendorID from the configuration space */
	pci_read_config_word(pdev, 0x00, &vendor_id);
	if (vendor_id == 0xFFFF)
		return true; /* device removed */

	return false; /* device present */
}

/*
 * This function is called for clean the pending command in the
 * command slot during the surprise removal of device and return
 * error to the upper layer.
 *
 * @dd Pointer to the DRIVER_DATA structure.
 *
 * return value
 *	None
 */
static void mtip_command_cleanup(struct driver_data *dd)
{
	int group = 0, commandslot = 0, commandindex = 0;
	struct mtip_cmd *command;
	struct mtip_port *port = dd->port;

	for (group = 0; group < 4; group++) {
		for (commandslot = 0; commandslot < 32; commandslot++) {
			if (!(port->allocated[group] & (1 << commandslot)))
				continue;

			commandindex = group << 5 | commandslot;
			command = &port->commands[commandindex];

			if (atomic_read(&command->active)
			    && (command->async_callback)) {
				command->async_callback(command->async_data,
					-ENODEV);
				command->async_callback = NULL;
				command->async_data = NULL;
			}

			dma_unmap_sg(&port->dd->pdev->dev,
				command->sg,
				command->scatter_ents,
				command->direction);
		}
	}

	up(&port->cmd_slot);

	atomic_set(&dd->drv_cleanup_done, true);
}

/*
 * Obtain an empty command slot.
 *
 * This function needs to be reentrant since it could be called
 * at the same time on multiple CPUs. The allocation of the
 * command slot must be atomic.
 *
 * @port Pointer to the port data structure.
 *
 * return value
 *	>= 0	Index of command slot obtained.
 *	-1	No command slots available.
 */
static int get_slot(struct mtip_port *port)
{
	int slot, i;
	unsigned int num_command_slots = port->dd->slot_groups * 32;

	/*
	 * Try 10 times, because there is a small race here.
	 *  that's ok, because it's still cheaper than a lock.
	 *
	 * Race: Since this section is not protected by lock, same bit
	 * could be chosen by different process contexts running in
	 * different processor. So instead of costly lock, we are going
	 * with loop.
	 */
	for (i = 0; i < 10; i++) {
		slot = find_next_zero_bit(port->allocated,
					 num_command_slots, 1);
		if ((slot < num_command_slots) &&
		    (!test_and_set_bit(slot, port->allocated)))
			return slot;
	}
	dev_warn(&port->dd->pdev->dev, "Failed to get a tag.\n");

	if (mtip_check_surprise_removal(port->dd->pdev)) {
		/* Device not present, clean outstanding commands */
		mtip_command_cleanup(port->dd);
	}
	return -1;
}

/*
 * Release a command slot.
 *
 * @port Pointer to the port data structure.
 * @tag  Tag of command to release
 *
 * return value
 *	None
 */
static inline void release_slot(struct mtip_port *port, int tag)
{
	smp_mb__before_clear_bit();
	clear_bit(tag, port->allocated);
	smp_mb__after_clear_bit();
}

/*
 * Reset the HBA (without sleeping)
 *
 * Just like hba_reset, except does not call sleep, so can be
 * run from interrupt/tasklet context.
 *
 * @dd Pointer to the driver data structure.
 *
 * return value
 *	0	The reset was successful.
 *	-1	The HBA Reset bit did not clear.
 */
static int hba_reset_nosleep(struct driver_data *dd)
{
	unsigned long timeout;

	/* Chip quirk: quiesce any chip function */
	mdelay(10);

	/* Set the reset bit */
	writel(HOST_RESET, dd->mmio + HOST_CTL);

	/* Flush */
	readl(dd->mmio + HOST_CTL);

	/*
	 * Wait 10ms then spin for up to 1 second
	 * waiting for reset acknowledgement
	 */
	timeout = jiffies + msecs_to_jiffies(1000);
	mdelay(10);
	while ((readl(dd->mmio + HOST_CTL) & HOST_RESET)
		 && time_before(jiffies, timeout))
		mdelay(1);

	if (readl(dd->mmio + HOST_CTL) & HOST_RESET)
		return -1;

	return 0;
}

/*
 * Issue a command to the hardware.
 *
 * Set the appropriate bit in the s_active and Command Issue hardware
 * registers, causing hardware command processing to begin.
 *
 * @port Pointer to the port structure.
 * @tag  The tag of the command to be issued.
 *
 * return value
 *      None
 */
static inline void mtip_issue_ncq_command(struct mtip_port *port, int tag)
{
	unsigned long flags = 0;

	atomic_set(&port->commands[tag].active, 1);

	spin_lock_irqsave(&port->cmd_issue_lock, flags);

	writel((1 << MTIP_TAG_BIT(tag)),
			port->s_active[MTIP_TAG_INDEX(tag)]);
	writel((1 << MTIP_TAG_BIT(tag)),
			port->cmd_issue[MTIP_TAG_INDEX(tag)]);

	spin_unlock_irqrestore(&port->cmd_issue_lock, flags);
}

/*
 * Enable/disable the reception of FIS
 *
 * @port   Pointer to the port data structure
 * @enable 1 to enable, 0 to disable
 *
 * return value
 *	Previous state: 1 enabled, 0 disabled
 */
static int mtip_enable_fis(struct mtip_port *port, int enable)
{
	u32 tmp;

	/* enable FIS reception */
	tmp = readl(port->mmio + PORT_CMD);
	if (enable)
		writel(tmp | PORT_CMD_FIS_RX, port->mmio + PORT_CMD);
	else
		writel(tmp & ~PORT_CMD_FIS_RX, port->mmio + PORT_CMD);

	/* Flush */
	readl(port->mmio + PORT_CMD);

	return (((tmp & PORT_CMD_FIS_RX) == PORT_CMD_FIS_RX));
}

/*
 * Enable/disable the DMA engine
 *
 * @port   Pointer to the port data structure
 * @enable 1 to enable, 0 to disable
 *
 * return value
 *	Previous state: 1 enabled, 0 disabled.
 */
static int mtip_enable_engine(struct mtip_port *port, int enable)
{
	u32 tmp;

	/* enable FIS reception */
	tmp = readl(port->mmio + PORT_CMD);
	if (enable)
		writel(tmp | PORT_CMD_START, port->mmio + PORT_CMD);
	else
		writel(tmp & ~PORT_CMD_START, port->mmio + PORT_CMD);

	readl(port->mmio + PORT_CMD);
	return (((tmp & PORT_CMD_START) == PORT_CMD_START));
}

/*
 * Enables the port DMA engine and FIS reception.
 *
 * return value
 *	None
 */
static inline void mtip_start_port(struct mtip_port *port)
{
	/* Enable FIS reception */
	mtip_enable_fis(port, 1);

	/* Enable the DMA engine */
	mtip_enable_engine(port, 1);
}

/*
 * Deinitialize a port by disabling port interrupts, the DMA engine,
 * and FIS reception.
 *
 * @port Pointer to the port structure
 *
 * return value
 *	None
 */
static inline void mtip_deinit_port(struct mtip_port *port)
{
	/* Disable interrupts on this port */
	writel(0, port->mmio + PORT_IRQ_MASK);

	/* Disable the DMA engine */
	mtip_enable_engine(port, 0);

	/* Disable FIS reception */
	mtip_enable_fis(port, 0);
}

/*
 * Initialize a port.
 *
 * This function deinitializes the port by calling mtip_deinit_port() and
 * then initializes it by setting the command header and RX FIS addresses,
 * clearing the SError register and any pending port interrupts before
 * re-enabling the default set of port interrupts.
 *
 * @port Pointer to the port structure.
 *
 * return value
 *	None
 */
static void mtip_init_port(struct mtip_port *port)
{
	int i;
	mtip_deinit_port(port);

	/* Program the command list base and FIS base addresses */
	if (readl(port->dd->mmio + HOST_CAP) & HOST_CAP_64) {
		writel((port->command_list_dma >> 16) >> 16,
			 port->mmio + PORT_LST_ADDR_HI);
		writel((port->rxfis_dma >> 16) >> 16,
			 port->mmio + PORT_FIS_ADDR_HI);
	}

	writel(port->command_list_dma & 0xffffffff,
			port->mmio + PORT_LST_ADDR);
	writel(port->rxfis_dma & 0xffffffff, port->mmio + PORT_FIS_ADDR);

	/* Clear SError */
	writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR);

	/* reset the completed registers.*/
	for (i = 0; i < port->dd->slot_groups; i++)
		writel(0xFFFFFFFF, port->completed[i]);

	/* Clear any pending interrupts for this port */
	writel(readl(port->mmio + PORT_IRQ_STAT), port->mmio + PORT_IRQ_STAT);

	/* Enable port interrupts */
	writel(DEF_PORT_IRQ, port->mmio + PORT_IRQ_MASK);
}

/*
 * Restart a port
 *
 * @port Pointer to the port data structure.
 *
 * return value
 *	None
 */
static void mtip_restart_port(struct mtip_port *port)
{
	unsigned long timeout;

	/* Disable the DMA engine */
	mtip_enable_engine(port, 0);

	/* Chip quirk: wait up to 500ms for PxCMD.CR == 0 */
	timeout = jiffies + msecs_to_jiffies(500);
	while ((readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON)
		 && time_before(jiffies, timeout))
		;

	/*
	 * Chip quirk: escalate to hba reset if
	 * PxCMD.CR not clear after 500 ms
	 */
	if (readl(port->mmio + PORT_CMD) & PORT_CMD_LIST_ON) {
		dev_warn(&port->dd->pdev->dev,
			"PxCMD.CR not clear, escalating reset\n");

		if (hba_reset_nosleep(port->dd))
			dev_err(&port->dd->pdev->dev,
				"HBA reset escalation failed.\n");

		/* 30 ms delay before com reset to quiesce chip */
		mdelay(30);
	}

	dev_warn(&port->dd->pdev->dev, "Issuing COM reset\n");

	/* Set PxSCTL.DET */
	writel(readl(port->mmio + PORT_SCR_CTL) |
			 1, port->mmio + PORT_SCR_CTL);
	readl(port->mmio + PORT_SCR_CTL);

	/* Wait 1 ms to quiesce chip function */
	timeout = jiffies + msecs_to_jiffies(1);
	while (time_before(jiffies, timeout))
		;

	/* Clear PxSCTL.DET */
	writel(readl(port->mmio + PORT_SCR_CTL) & ~1,
			 port->mmio + PORT_SCR_CTL);
	readl(port->mmio + PORT_SCR_CTL);

	/* Wait 500 ms for bit 0 of PORT_SCR_STS to be set */
	timeout = jiffies + msecs_to_jiffies(500);
	while (((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0)
			 && time_before(jiffies, timeout))
		;

	if ((readl(port->mmio + PORT_SCR_STAT) & 0x01) == 0)
		dev_warn(&port->dd->pdev->dev,
			"COM reset failed\n");

	/* Clear SError, the PxSERR.DIAG.x should be set so clear it */
	writel(readl(port->mmio + PORT_SCR_ERR), port->mmio + PORT_SCR_ERR);

	/* Enable the DMA engine */
	mtip_enable_engine(port, 1);
}

/*
 * Called periodically to see if any read/write commands are
 * taking too long to complete.
 *
 * @data Pointer to the PORT data structure.
 *
 * return value
 *	None
 */
static void mtip_timeout_function(unsigned long int data)
{
	struct mtip_port *port = (struct mtip_port *) data;
	struct host_to_dev_fis *fis;
	struct mtip_cmd *command;
	int tag, cmdto_cnt = 0;
	unsigned int bit, group;
	unsigned int num_command_slots = port->dd->slot_groups * 32;

	if (unlikely(!port))
		return;

	if (atomic_read(&port->dd->resumeflag) == true) {
		mod_timer(&port->cmd_timer,
			jiffies + msecs_to_jiffies(30000));
		return;
	}

	for (tag = 0; tag < num_command_slots; tag++) {
		/*
		 * Skip internal command slot as it has
		 * its own timeout mechanism
		 */
		if (tag == MTIP_TAG_INTERNAL)
			continue;

		if (atomic_read(&port->commands[tag].active) &&
		   (time_after(jiffies, port->commands[tag].comp_time))) {
			group = tag >> 5;
			bit = tag & 0x1f;

			command = &port->commands[tag];
			fis = (struct host_to_dev_fis *) command->command;

			dev_warn(&port->dd->pdev->dev,
				"Timeout for command tag %d\n", tag);

			cmdto_cnt++;
			if (cmdto_cnt == 1)
				atomic_inc(&port->dd->eh_active);

			/*
			 * Clear the completed bit. This should prevent
			 *  any interrupt handlers from trying to retire
			 *  the command.
			 */
			writel(1 << bit, port->completed[group]);

			/* Call the async completion callback. */
			if (likely(command->async_callback))
				command->async_callback(command->async_data,
							 -EIO);
			command->async_callback = NULL;
			command->comp_func = NULL;

			/* Unmap the DMA scatter list entries */
			dma_unmap_sg(&port->dd->pdev->dev,
					command->sg,
					command->scatter_ents,
					command->direction);

			/*
			 * Clear the allocated bit and active tag for the
			 * command.
			 */
			atomic_set(&port->commands[tag].active, 0);
			release_slot(port, tag);

			up(&port->cmd_slot);
		}
	}

	if (cmdto_cnt) {
		dev_warn(&port->dd->pdev->dev,
			"%d commands timed out: restarting port",
			cmdto_cnt);
		mtip_restart_port(port);
		atomic_dec(&port->dd->eh_active);
	}

	/* Restart the timer */
	mod_timer(&port->cmd_timer,
		jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
}

/*
 * IO completion function.
 *
 * This completion function is called by the driver ISR when a
 * command that was issued by the kernel completes. It first calls the
 * asynchronous completion function which normally calls back into the block
 * layer passing the asynchronous callback data, then unmaps the
 * scatter list associated with the completed command, and finally
 * clears the allocated bit associated with the completed command.
 *
 * @port   Pointer to the port data structure.
 * @tag    Tag of the command.
 * @data   Pointer to driver_data.
 * @status Completion status.
 *
 * return value
 *	None
 */
static void mtip_async_complete(struct mtip_port *port,
				int tag,
				void *data,
				int status)
{
	struct mtip_cmd *command;
	struct driver_data *dd = data;
	int cb_status = status ? -EIO : 0;

	if (unlikely(!dd) || unlikely(!port))
		return;

	command = &port->commands[tag];

	if (unlikely(status == PORT_IRQ_TF_ERR)) {
		dev_warn(&port->dd->pdev->dev,
			"Command tag %d failed due to TFE\n", tag);
	}

	/* Upper layer callback */
	if (likely(command->async_callback))
		command->async_callback(command->async_data, cb_status);

	command->async_callback = NULL;
	command->comp_func = NULL;

	/* Unmap the DMA scatter list entries */
	dma_unmap_sg(&dd->pdev->dev,
		command->sg,
		command->scatter_ents,
		command->direction);

	/* Clear the allocated and active bits for the command */
	atomic_set(&port->commands[tag].active, 0);
	release_slot(port, tag);

	up(&port->cmd_slot);
}

/*
 * Internal command completion callback function.
 *
 * This function is normally called by the driver ISR when an internal
 * command completed. This function signals the command completion by
 * calling complete().
 *
 * @port   Pointer to the port data structure.
 * @tag    Tag of the command that has completed.
 * @data   Pointer to a completion structure.
 * @status Completion status.
 *
 * return value
 *	None
 */
static void mtip_completion(struct mtip_port *port,
			    int tag,
			    void *data,
			    int status)
{
	struct mtip_cmd *command = &port->commands[tag];
	struct completion *waiting = data;
	if (unlikely(status == PORT_IRQ_TF_ERR))
		dev_warn(&port->dd->pdev->dev,
			"Internal command %d completed with TFE\n", tag);

	command->async_callback = NULL;
	command->comp_func = NULL;

	complete(waiting);
}

/*
 * Helper function for tag logging
 */
static void print_tags(struct driver_data *dd,
			char *msg,
			unsigned long *tagbits)
{
	unsigned int tag, count = 0;

	for (tag = 0; tag < (dd->slot_groups) * 32; tag++) {
		if (test_bit(tag, tagbits))
			count++;
	}
	if (count)
		dev_info(&dd->pdev->dev, "%s [%i tags]\n", msg, count);
}

/*
 * Handle an error.
 *
 * @dd Pointer to the DRIVER_DATA structure.
 *
 * return value
 *	None
 */
static void mtip_handle_tfe(struct driver_data *dd)
{
	int group, tag, bit, reissue;
	struct mtip_port *port;
	struct mtip_cmd  *command;
	u32 completed;
	struct host_to_dev_fis *fis;
	unsigned long tagaccum[SLOTBITS_IN_LONGS];

	dev_warn(&dd->pdev->dev, "Taskfile error\n");

	port = dd->port;

	/* Stop the timer to prevent command timeouts. */
	del_timer(&port->cmd_timer);

	/* Set eh_active */
	atomic_inc(&dd->eh_active);

	/* Loop through all the groups */
	for (group = 0; group < dd->slot_groups; group++) {
		completed = readl(port->completed[group]);

		/* clear completed status register in the hardware.*/
		writel(completed, port->completed[group]);

		/* clear the tag accumulator */
		memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));

		/* Process successfully completed commands */
		for (bit = 0; bit < 32 && completed; bit++) {
			if (!(completed & (1<<bit)))
				continue;
			tag = (group << 5) + bit;

			/* Skip the internal command slot */
			if (tag == MTIP_TAG_INTERNAL)
				continue;

			command = &port->commands[tag];
			if (likely(command->comp_func)) {
				set_bit(tag, tagaccum);
				atomic_set(&port->commands[tag].active, 0);
				command->comp_func(port,
					 tag,
					 command->comp_data,
					 0);
			} else {
				dev_err(&port->dd->pdev->dev,
					"Missing completion func for tag %d",
					tag);
				if (mtip_check_surprise_removal(dd->pdev)) {
					mtip_command_cleanup(dd);
					/* don't proceed further */
					return;
				}
			}
		}
	}
	print_tags(dd, "TFE tags completed:", tagaccum);

	/* Restart the port */
	mdelay(20);
	mtip_restart_port(port);

	/* clear the tag accumulator */
	memset(tagaccum, 0, SLOTBITS_IN_LONGS * sizeof(long));

	/* Loop through all the groups */
	for (group = 0; group < dd->slot_groups; group++) {
		for (bit = 0; bit < 32; bit++) {
			reissue = 1;
			tag = (group << 5) + bit;

			/* If the active bit is set re-issue the command */
			if (atomic_read(&port->commands[tag].active) == 0)
				continue;

			fis = (struct host_to_dev_fis *)
				port->commands[tag].command;

			/* Should re-issue? */
			if (tag == MTIP_TAG_INTERNAL ||
			    fis->command == ATA_CMD_SET_FEATURES)
				reissue = 0;

			/*
			 * First check if this command has
			 *  exceeded its retries.
			 */
			if (reissue &&
			    (port->commands[tag].retries-- > 0)) {

				set_bit(tag, tagaccum);

				/* Update the timeout value. */
				port->commands[tag].comp_time =
					jiffies + msecs_to_jiffies(
					MTIP_NCQ_COMMAND_TIMEOUT_MS);
				/* Re-issue the command. */
				mtip_issue_ncq_command(port, tag);

				continue;
			}

			/* Retire a command that will not be reissued */
			dev_warn(&port->dd->pdev->dev,
				"retiring tag %d\n", tag);
			atomic_set(&port->commands[tag].active, 0);

			if (port->commands[tag].comp_func)
				port->commands[tag].comp_func(
					port,
					tag,
					port->commands[tag].comp_data,
					PORT_IRQ_TF_ERR);
			else
				dev_warn(&port->dd->pdev->dev,
					"Bad completion for tag %d\n",
					tag);
		}
	}
	print_tags(dd, "TFE tags reissued:", tagaccum);

	/* Decrement eh_active */
	atomic_dec(&dd->eh_active);

	mod_timer(&port->cmd_timer,
		 jiffies + msecs_to_jiffies(MTIP_TIMEOUT_CHECK_PERIOD));
}

/*
 * Handle a set device bits interrupt
 */
static inline void mtip_process_sdbf(struct driver_data *dd)
{
	struct mtip_port  *port = dd->port;
	int group, tag, bit;
	u32 completed;
	struct mtip_cmd *command;

	/* walk all bits in all slot groups */
	for (group = 0; group < dd->slot_groups; group++) {
		completed = readl(port->completed[group]);

		/* clear completed status register in the hardware.*/
		writel(completed, port->completed[group]);

		/* Process completed commands. */
		for (bit = 0;
		     (bit < 32) && completed;
		     bit++, completed >>= 1) {
			if (completed & 0x01) {
				tag = (group << 5) | bit;

				/* skip internal command slot. */
				if (unlikely(tag == MTIP_TAG_INTERNAL))
					continue;

				command = &port->commands[tag];

				/* make internal callback */
				if (likely(command->comp_func)) {
					command->comp_func(
						port,
						tag,
						command->comp_data,
						0);
				} else {
					dev_warn(&dd->pdev->dev,
						"Null completion "
						"for tag %d",
						tag);

					if (mtip_check_surprise_removal(
						dd->pdev)) {
						mtip_command_cleanup(dd);
						return;
					}
				}
			}
		}
	}
}

/*
 * Process legacy pio and d2h interrupts
 */
static inline void mtip_process_legacy(struct driver_data *dd, u32 port_stat)
{
	struct mtip_port *port = dd->port;
	struct mtip_cmd *cmd = &port->commands[MTIP_TAG_INTERNAL];

	if (port->internal_cmd_in_progress &&
	    cmd != NULL &&
	    !(readl(port->cmd_issue[MTIP_TAG_INTERNAL])
		& (1 << MTIP_TAG_INTERNAL))) {
		if (cmd->comp_func) {
			cmd->comp_func(port,
				MTIP_TAG_INTERNAL,
				cmd->comp_data,
				0);
			return;
		}
	}

	dev_warn(&dd->pdev->dev, "IRQ status 0x%x ignored.\n", port_stat);

	return;
}

/*
 * Demux and handle errors
 */
static inline void mtip_process_errors(struct driver_data *dd, u32 port_stat)
{
	if (likely(port_stat & (PORT_IRQ_TF_ERR | PORT_IRQ_IF_ERR)))
		mtip_handle_tfe(dd);

	if (unlikely(port_stat & PORT_IRQ_CONNECT)) {
		dev_warn(&dd->pdev->dev,
			"Clearing PxSERR.DIAG.x\n");
		writel((1 << 26), dd->port->mmio + PORT_SCR_ERR);
	}

	if (unlikely(port_stat & PORT_IRQ_PHYRDY)) {
		dev_warn(&dd->pdev->dev,
			"Clearing PxSERR.DIAG.n\n");
		writel((1 << 16), dd->port->mmio + PORT_SCR_ERR);
	}

	if (unlikely(port_stat & ~PORT_IRQ_HANDLED)) {
		dev_warn(&dd->pdev->dev,
			"Port stat errors %x unhandled\n",
			(port_stat & ~PORT_IRQ_HANDLED));
	}
}

static inline irqreturn_t mtip_handle_irq(struct driver_data *data)
{
	struct driver_data *dd = (struct driver_data *) data;
	struct mtip_port *port = dd->port;
	u32 hba_stat, port_stat;
	int rv = IRQ_NONE;

	hba_stat = readl(dd->mmio + HOST_IRQ_STAT);
	if (hba_stat) {
		rv = IRQ_HANDLED;

		/* Acknowledge the interrupt status on the port.*/
		port_stat = readl(port->mmio + PORT_IRQ_STAT);
		writel(port_stat, port->mmio + PORT_IRQ_STAT);

		/* Demux port status */
		if (likely(port_stat & PORT_IRQ_SDB_FIS))
			mtip_process_sdbf(dd);

		if (unlikely(port_stat & PORT_IRQ_ERR)) {
			if (unlikely(mtip_check_surprise_removal(dd->pdev))) {
				mtip_command_cleanup(dd);
				/* don't proceed further */
				return IRQ_HANDLED;
			}

			mtip_process_errors(dd, port_stat & PORT_IRQ_ERR);
		}

		if (unlikely(port_stat & PORT_IRQ_LEGACY))
			mtip_process_legacy(dd, port_stat & PORT_IRQ_LEGACY);
	}

	/* acknowledge interrupt */
	writel(hba_stat, dd->mmio + HOST_IRQ_STAT);

	return rv;
}

/*
 * Wrapper for mtip_handle_irq
 * (ignores return code)
 */
static void mtip_tasklet(unsigned long data)
{
	mtip_handle_irq((struct driver_data *) data);
}

/*