Commit 2de55db6 authored by Konrad Dybcio's avatar Konrad Dybcio Committed by Bjorn Andersson
Browse files

arm64: dts: qcom: sm8250-pdx203: Configure SLG51000 PMIC 



Xperia 1 II / PRO use the Dialog SLG51000 PMIC for powering some camera
sensors. Add the required nodes to support it and remove its remnants
from -edo.dtsi, as it's absent on 5 II.

Signed-off-by: default avatarKonrad Dybcio <konrad.dybcio@linaro.org>
Link: https://lore.kernel.org/r/20230614-topic-edo_pinsgpiopmic-v2-3-6f90bba54c53@linaro.org


Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
parent 6b8a6335

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo-pdx203.dts

+131 −0
Original line number Diff line number Diff line
@@ -15,6 +15,123 @@ / { 


/delete-node/ &vreg_l7f_1p8;



&i2c5 {

	clock-frequency = <400000>;

	status = "okay";



	pmic@75 {

		compatible = "dlg,slg51000";

		reg = <0x75>;

		dlg,cs-gpios = <&tlmm 69 GPIO_ACTIVE_HIGH>;

		vin5-supply = <&vreg_s1f_1p2>;

		vin6-supply = <&vreg_s1f_1p2>;



		pinctrl-0 = <&cam_pwr_b_cs>;

		pinctrl-names = "default";



		regulators {

			slg51000_1_ldo1: ldo1 {

				regulator-name = "slg51000_b_ldo1";

				regulator-min-microvolt = <2400000>;

				regulator-max-microvolt = <3300000>;

			};



			slg51000_1_ldo2: ldo2 {

				regulator-name = "slg51000_b_ldo2";

				regulator-min-microvolt = <2400000>;

				regulator-max-microvolt = <3300000>;

			};



			slg51000_1_ldo3: ldo3 {

				regulator-name = "slg51000_b_ldo3";

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <3750000>;

			};



			slg51000_1_ldo4: ldo4 {

				regulator-name = "slg51000_b_ldo4";

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <3750000>;

			};



			slg51000_1_ldo5: ldo5 {

				regulator-name = "slg51000_b_ldo5";

				regulator-min-microvolt = <500000>;

				regulator-max-microvolt = <1200000>;

			};



			slg51000_1_ldo6: ldo6 {

				regulator-name = "slg51000_b_ldo6";

				regulator-min-microvolt = <500000>;

				regulator-max-microvolt = <1200000>;

			};



			slg51000_1_ldo7: ldo7 {

				regulator-name = "slg51000_b_ldo7";

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <3750000>;

			};

		};

	};

};



&i2c15 {

	pmic@75 {

		compatible = "dlg,slg51000";

		reg = <0x75>;

		dlg,cs-gpios = <&tlmm 71 GPIO_ACTIVE_HIGH>;

		vin5-supply = <&vreg_l2f_1p3>;

		vin6-supply = <&vreg_l2f_1p3>;



		pinctrl-0 = <&cam_pwr_a_cs>;

		pinctrl-names = "default";



		regulators {

			slg51000_0_ldo1: ldo1 {

				regulator-name = "slg51000_a_ldo1";

				regulator-min-microvolt = <2400000>;

				regulator-max-microvolt = <3300000>;

			};



			slg51000_0_ldo2: ldo2 {

				regulator-name = "slg51000_a_ldo2";

				regulator-min-microvolt = <2400000>;

				regulator-max-microvolt = <3300000>;

			};



			slg51000_0_ldo3: ldo3 {

				regulator-name = "slg51000_a_ldo3";

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <3750000>;

			};



			slg51000_0_ldo4: ldo4 {

				regulator-name = "slg51000_a_ldo4";

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <3750000>;

			};



			slg51000_0_ldo5: ldo5 {

				regulator-name = "slg51000_a_ldo5";

				regulator-min-microvolt = <500000>;

				regulator-max-microvolt = <1200000>;

			};



			slg51000_0_ldo6: ldo6 {

				regulator-name = "slg51000_a_ldo6";

				regulator-min-microvolt = <500000>;

				regulator-max-microvolt = <1200000>;

			};



			slg51000_0_ldo7: ldo7 {

				regulator-name = "slg51000_a_ldo7";

				regulator-min-microvolt = <1200000>;

				regulator-max-microvolt = <3750000>;

			};

		};

	};

};



&pm8009_gpios {

	gpio-line-names = "NC", /* GPIO_1 */

			  "CAM_PWR_LD_EN",
@@ -246,4 +363,18 @@ &tlmm { 
			  "HST_BLE_SNS_UART6_RX",

			  "HST_WLAN_UART_TX",

			  "HST_WLAN_UART_RX";



	cam_pwr_b_cs: cam-pwr-b-state {

		pins = "gpio69";

		drive-strength = <2>;

		bias-disable;

		output-low;

	};



	cam_pwr_a_cs: cam-pwr-a-state {

		pins = "gpio71";

		drive-strength = <2>;

		bias-disable;

		output-low;

	};

};

arch/arm64/boot/dts/qcom/sm8250-sony-xperia-edo.dtsi

+0 −7
Original line number Diff line number Diff line
@@ -486,13 +486,6 @@ cs35l41_r: speaker-amp@41 { 
	};

};



&i2c5 {

	status = "okay";

	clock-frequency = <400000>;



	/* Dialog SLG51000 CMIC @ 75 */

};



&i2c9 {

	status = "okay";

	clock-frequency = <400000>;