Commit 3be4112c authored by Eliad Peller's avatar Eliad Peller Committed by Luciano Coelho
Browse files

wl12xx: update BT coex configuration params 



The BT coex params api have been changed.
Update it, and init coex for both sta and ap.

Signed-off-by: default avatarEliad Peller <eliad@wizery.com>
Signed-off-by: default avatarLuciano Coelho <coelho@ti.com>
parent 251c177f

drivers/net/wireless/wl12xx/acx.c

+5 −35
Original line number Diff line number Diff line
@@ -528,13 +528,13 @@ int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable) 
	return ret;

}



int wl1271_acx_sta_sg_cfg(struct wl1271 *wl)

int wl12xx_acx_sg_cfg(struct wl1271 *wl)

{

	struct acx_sta_bt_wlan_coex_param *param;

	struct acx_bt_wlan_coex_param *param;

	struct conf_sg_settings *c = &wl->conf.sg;

	int i, ret;



	wl1271_debug(DEBUG_ACX, "acx sg sta cfg");

	wl1271_debug(DEBUG_ACX, "acx sg cfg");



	param = kzalloc(sizeof(*param), GFP_KERNEL);

	if (!param) {
@@ -543,38 +543,8 @@ int wl1271_acx_sta_sg_cfg(struct wl1271 *wl) 
	}



	/* BT-WLAN coext parameters */

	for (i = 0; i < CONF_SG_STA_PARAMS_MAX; i++)

		param->params[i] = cpu_to_le32(c->sta_params[i]);

	param->param_idx = CONF_SG_PARAMS_ALL;



	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));

	if (ret < 0) {

		wl1271_warning("failed to set sg config: %d", ret);

		goto out;

	}



out:

	kfree(param);

	return ret;

}



int wl1271_acx_ap_sg_cfg(struct wl1271 *wl)

{

	struct acx_ap_bt_wlan_coex_param *param;

	struct conf_sg_settings *c = &wl->conf.sg;

	int i, ret;



	wl1271_debug(DEBUG_ACX, "acx sg ap cfg");



	param = kzalloc(sizeof(*param), GFP_KERNEL);

	if (!param) {

		ret = -ENOMEM;

		goto out;

	}



	/* BT-WLAN coext parameters */

	for (i = 0; i < CONF_SG_AP_PARAMS_MAX; i++)

		param->params[i] = cpu_to_le32(c->ap_params[i]);

	for (i = 0; i < CONF_SG_PARAMS_MAX; i++)

		param->params[i] = cpu_to_le32(c->params[i]);

	param->param_idx = CONF_SG_PARAMS_ALL;



	ret = wl1271_cmd_configure(wl, ACX_SG_CFG, param, sizeof(*param));

drivers/net/wireless/wl12xx/acx.h

+3 −13
Original line number Diff line number Diff line
@@ -302,23 +302,14 @@ struct acx_bt_wlan_coex { 
	u8 pad[3];

} __packed;



struct acx_sta_bt_wlan_coex_param {

struct acx_bt_wlan_coex_param {

	struct acx_header header;



	__le32 params[CONF_SG_STA_PARAMS_MAX];

	__le32 params[CONF_SG_PARAMS_MAX];

	u8 param_idx;

	u8 padding[3];

} __packed;



struct acx_ap_bt_wlan_coex_param {

	struct acx_header header;



	__le32 params[CONF_SG_AP_PARAMS_MAX];

	u8 param_idx;

	u8 padding[3];

} __packed;





struct acx_dco_itrim_params {

	struct acx_header header;
@@ -1269,8 +1260,7 @@ int wl1271_acx_beacon_filter_opt(struct wl1271 *wl, bool enable_filter); 
int wl1271_acx_beacon_filter_table(struct wl1271 *wl);

int wl1271_acx_conn_monit_params(struct wl1271 *wl, bool enable);

int wl1271_acx_sg_enable(struct wl1271 *wl, bool enable);

int wl1271_acx_sta_sg_cfg(struct wl1271 *wl);

int wl1271_acx_ap_sg_cfg(struct wl1271 *wl);

int wl12xx_acx_sg_cfg(struct wl1271 *wl);

int wl1271_acx_cca_threshold(struct wl1271 *wl);

int wl1271_acx_bcn_dtim_options(struct wl1271 *wl);

int wl1271_acx_aid(struct wl1271 *wl, u16 aid);

drivers/net/wireless/wl12xx/conf.h

+107 −211
Original line number Diff line number Diff line
@@ -99,40 +99,75 @@ enum { 


enum {

	/*

	 * PER threshold in PPM of the BT voice

	 * Configure the min and max time BT gains the antenna

	 * in WLAN / BT master basic rate

	 *

	 * Range: 0 - 10000000

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_BT_PER_THRESHOLD = 0,

	CONF_SG_ACL_BT_MASTER_MIN_BR = 0,

	CONF_SG_ACL_BT_MASTER_MAX_BR,



	/*

	 * Number of consequent RX_ACTIVE activities to override BT voice

	 * frames to ensure WLAN connection

	 * Configure the min and max time BT gains the antenna

	 * in WLAN / BT slave basic rate

	 *

	 * Range: 0 - 100

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_HV3_MAX_OVERRIDE,

	CONF_SG_ACL_BT_SLAVE_MIN_BR,

	CONF_SG_ACL_BT_SLAVE_MAX_BR,



	/*

	 * Defines the PER threshold of the BT voice

	 * Configure the min and max time BT gains the antenna

	 * in WLAN / BT master EDR

	 *

	 * Range: 0 - 65000

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_BT_NFS_SAMPLE_INTERVAL,

	CONF_SG_ACL_BT_MASTER_MIN_EDR,

	CONF_SG_ACL_BT_MASTER_MAX_EDR,



	/*

	 * Defines the load ratio of BT

	 * Configure the min and max time BT gains the antenna

	 * in WLAN / BT slave EDR

	 *

	 * Range: 0 - 100 (%)

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_BT_LOAD_RATIO,

	CONF_SG_ACL_BT_SLAVE_MIN_EDR,

	CONF_SG_ACL_BT_SLAVE_MAX_EDR,



	/*

	 * Defines whether the SG will force WLAN host to enter/exit PSM

	 * The maximum time WLAN can gain the antenna

	 * in WLAN PSM / BT master/slave BR

	 *

	 * Range: 1 - SG can force, 0 - host handles PSM

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_AUTO_PS_MODE,

	CONF_SG_ACL_WLAN_PS_MASTER_BR,

	CONF_SG_ACL_WLAN_PS_SLAVE_BR,



	/*

	 * The maximum time WLAN can gain the antenna

	 * in WLAN PSM / BT master/slave EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_ACL_WLAN_PS_MASTER_EDR,

	CONF_SG_ACL_WLAN_PS_SLAVE_EDR,



	/* TODO: explain these values */

	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR,

	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR,

	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR,

	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR,

	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR,

	CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR,

	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR,

	CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR,



	CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR,

	CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR,

	CONF_SG_ACL_PASSIVE_SCAN_BT_BR,

	CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR,

	CONF_SG_ACL_PASSIVE_SCAN_BT_EDR,

	CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR,



	/*

	 * Compensation percentage of probe requests when scan initiated
@@ -151,102 +186,70 @@ enum { 
	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,



	/*

	 * Defines antenna configuration (single/dual antenna)

	 *

	 * Range: 0 - single antenna, 1 - dual antenna

	 */

	CONF_SG_ANTENNA_CONFIGURATION,



	/*

	 * The threshold (percent) of max consequtive beacon misses before

	 * increasing priority of beacon reception.

	 *

	 * Range: 0 - 100 (%)

	 */

	CONF_SG_BEACON_MISS_PERCENT,



	/*

	 * The rate threshold below which receiving a data frame from the AP

	 * will increase the priority of the data frame above BT traffic.

	 *

	 * Range: 0,2, 5(=5.5), 6, 9, 11, 12, 18, 24, 36, 48, 54

	 */

	CONF_SG_RATE_ADAPT_THRESH,



	/*

	 * Not used currently.

	 * Compensation percentage of WLAN active scan window if initiated

	 * during BT A2DP

	 *

	 * Range: 0

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_RATE_ADAPT_SNR,

	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN PSM / BT master basic rate

	 * Compensation percentage of WLAN passive scan window if initiated

	 * during BT A2DP BR

	 *

	 * Range: 0 - 255 (ms)

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR,

	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR,

	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR,



	/*

	 * The time after it expires no new WLAN trigger frame is trasmitted

	 * in WLAN PSM / BT master basic rate

	 * Compensation percentage of WLAN passive scan window if initiated

	 * during BT A2DP EDR

	 *

	 * Range: 0 - 255 (ms)

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR,

	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN PSM / BT slave basic rate

	 * Compensation percentage of WLAN passive scan window if initiated

	 * during BT voice

	 *

	 * Range: 0 - 255 (ms)

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR,

	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR,

	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,



	/*

	 * The time after it expires no new WLAN trigger frame is trasmitted

	 * in WLAN PSM / BT slave basic rate

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR,

	/* TODO: explain these values */

	CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,

	CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN,

	CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN PSM / BT master EDR

	 * Defines whether the SG will force WLAN host to enter/exit PSM

	 *

	 * Range: 0 - 255 (ms)

	 * Range: 1 - SG can force, 0 - host handles PSM

	 */

	CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR,

	CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR,

	CONF_SG_STA_FORCE_PS_IN_BT_SCO,



	/*

	 * The time after it expires no new WLAN trigger frame is trasmitted

	 * in WLAN PSM / BT master EDR

	 * Defines antenna configuration (single/dual antenna)

	 *

	 * Range: 0 - 255 (ms)

	 * Range: 0 - single antenna, 1 - dual antenna

	 */

	CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR,

	CONF_SG_ANTENNA_CONFIGURATION,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN PSM / BT slave EDR

	 * The threshold (percent) of max consecutive beacon misses before

	 * increasing priority of beacon reception.

	 *

	 * Range: 0 - 255 (ms)

	 * Range: 0 - 100 (%)

	 */

	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR,

	CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR,

	CONF_SG_BEACON_MISS_PERCENT,



	/*

	 * The time after it expires no new WLAN trigger frame is trasmitted

	 * in WLAN PSM / BT slave EDR

	 * Protection time of the DHCP procedure.

	 *

	 * Range: 0 - 255 (ms)

	 * Range: 0 - 100000 (ms)

	 */

	CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR,

	CONF_SG_DHCP_TIME,



	/*

	 * RX guard time before the beginning of a new BT voice frame during
@@ -273,166 +276,59 @@ enum { 
	 */

	CONF_SG_ADAPTIVE_RXT_TXT,



	/*

	 * The used WLAN legacy service period during active BT ACL link

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_PS_POLL_TIMEOUT,



	/*

	 * The used WLAN UPSD service period during active BT ACL link

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_UPSD_TIMEOUT,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN Active / BT master EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR,

	CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR,



	/*

	 * The maximum time WLAN can gain the antenna for

	 * in WLAN Active / BT master EDR

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR,

	/* TODO: explain this value */

	CONF_SG_GENERAL_USAGE_BIT_MAP,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN Active / BT slave EDR

	 * Number of consecutive BT voice frames not interrupted by WLAN

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR,

	CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR,



	/*

	 * The maximum time WLAN can gain the antenna for

	 * in WLAN Active / BT slave EDR

	 *

	 * Range: 0 - 255 (ms)

	 * Range: 0 - 100

	 */

	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR,

	CONF_SG_HV3_MAX_SERVED,



	/*

	 * Configure the min and max time BT gains the antenna

	 * in WLAN Active / BT basic rate

	 * The used WLAN legacy service period during active BT ACL link

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR,

	CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR,

	CONF_SG_PS_POLL_TIMEOUT,



	/*

	 * The maximum time WLAN can gain the antenna for

	 * in WLAN Active / BT basic rate

	 * The used WLAN UPSD service period during active BT ACL link

	 *

	 * Range: 0 - 255 (ms)

	 */

	CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR,



	/*

	 * Compensation percentage of WLAN passive scan window if initiated

	 * during BT voice

	 *

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,



	/*

	 * Compensation percentage of WLAN passive scan window if initiated

	 * during BT A2DP

	 *

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP,

	CONF_SG_UPSD_TIMEOUT,



	/*

	 * Fixed time ensured for BT traffic to gain the antenna during WLAN

	 * passive scan.

	 *

	 * Range: 0 - 1000 ms

	 */

	CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME,

	CONF_SG_CONSECUTIVE_CTS_THRESHOLD,

	CONF_SG_STA_RX_WINDOW_AFTER_DTIM,

	CONF_SG_STA_CONNECTION_PROTECTION_TIME,



	/*

	 * Fixed time ensured for WLAN traffic to gain the antenna during WLAN

	 * passive scan.

	 *

	 * Range: 0 - 1000 ms

	 */

	CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME,

	/* AP params */

	CONF_AP_BEACON_MISS_TX,

	CONF_AP_RX_WINDOW_AFTER_BEACON,

	CONF_AP_BEACON_WINDOW_INTERVAL,

	CONF_AP_CONNECTION_PROTECTION_TIME,

	CONF_AP_BT_ACL_VAL_BT_SERVE_TIME,

	CONF_AP_BT_ACL_VAL_WL_SERVE_TIME,



	/*

	 * Number of consequent BT voice frames not interrupted by WLAN

	 *

	 * Range: 0 - 100

	 */

	CONF_SG_HV3_MAX_SERVED,



	/*

	 * Protection time of the DHCP procedure.

	 *

	 * Range: 0 - 100000 (ms)

	 */

	CONF_SG_DHCP_TIME,



	/*

	 * Compensation percentage of WLAN active scan window if initiated

	 * during BT A2DP

	 *

	 * Range: 0 - 1000 (%)

	 */

	CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP,

	CONF_SG_TEMP_PARAM_1,

	CONF_SG_TEMP_PARAM_2,

	CONF_SG_TEMP_PARAM_3,

	CONF_SG_TEMP_PARAM_4,

	CONF_SG_TEMP_PARAM_5,



	/*

	 * AP beacon miss

	 *

	 * Range: 0 - 255

	 */

	CONF_SG_AP_BEACON_MISS_TX,



	/*

	 * AP RX window length

	 *

	 * Range: 0 - 50

	 */

	CONF_SG_RX_WINDOW_LENGTH,



	/*

	 * AP connection protection time

	 *

	 * Range: 0 - 5000

	 */

	CONF_SG_AP_CONNECTION_PROTECTION_TIME,



	CONF_SG_TEMP_PARAM_6,

	CONF_SG_TEMP_PARAM_7,

	CONF_SG_TEMP_PARAM_8,

	CONF_SG_TEMP_PARAM_9,

	CONF_SG_TEMP_PARAM_10,



	CONF_SG_STA_PARAMS_MAX = CONF_SG_TEMP_PARAM_5 + 1,

	CONF_SG_AP_PARAMS_MAX = CONF_SG_TEMP_PARAM_10 + 1,



	CONF_SG_PARAMS_MAX,

	CONF_SG_PARAMS_ALL = 0xff

};



struct conf_sg_settings {

	u32 sta_params[CONF_SG_STA_PARAMS_MAX];

	u32 ap_params[CONF_SG_AP_PARAMS_MAX];

	u32 params[CONF_SG_PARAMS_MAX];

	u8 state;

};
@@ -913,7 +809,7 @@ struct conf_conn_settings { 
	struct conf_bcn_filt_rule bcn_filt_ie[CONF_MAX_BCN_FILT_IE_COUNT];



	/*

	 * The number of consequtive beacons to lose, before the firmware

	 * The number of consecutive beacons to lose, before the firmware

	 * becomes out of synch.

	 *

	 * Range: u32
@@ -951,7 +847,7 @@ struct conf_conn_settings { 
	u8 rx_broadcast_in_ps;



	/*

	 * Consequtive PS Poll failures before sending event to driver

	 * Consecutive PS Poll failures before sending event to driver

	 *

	 * Range: u8

	 */

drivers/net/wireless/wl12xx/init.c

+1 −4
Original line number Diff line number Diff line
@@ -277,10 +277,7 @@ int wl1271_init_pta(struct wl1271 *wl) 
{

	int ret;



	if (wl->bss_type == BSS_TYPE_AP_BSS)

		ret = wl1271_acx_ap_sg_cfg(wl);

	else

		ret = wl1271_acx_sta_sg_cfg(wl);

	ret = wl12xx_acx_sg_cfg(wl);

	if (ret < 0)

		return ret;

drivers/net/wireless/wl12xx/main.c

+61 −104
Original line number Diff line number Diff line
@@ -52,110 +52,67 @@ 


static struct conf_drv_settings default_conf = {

	.sg = {

		.sta_params = {

			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,

			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,

			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,

			[CONF_SG_BT_LOAD_RATIO]                     = 200,

			[CONF_SG_AUTO_PS_MODE]                      = 1,

		.params = {

			[CONF_SG_ACL_BT_MASTER_MIN_BR] = 10,

			[CONF_SG_ACL_BT_MASTER_MAX_BR] = 180,

			[CONF_SG_ACL_BT_SLAVE_MIN_BR] = 10,

			[CONF_SG_ACL_BT_SLAVE_MAX_BR] = 180,

			[CONF_SG_ACL_BT_MASTER_MIN_EDR] = 10,

			[CONF_SG_ACL_BT_MASTER_MAX_EDR] = 80,

			[CONF_SG_ACL_BT_SLAVE_MIN_EDR] = 10,

			[CONF_SG_ACL_BT_SLAVE_MAX_EDR] = 80,

			[CONF_SG_ACL_WLAN_PS_MASTER_BR] = 8,

			[CONF_SG_ACL_WLAN_PS_SLAVE_BR] = 8,

			[CONF_SG_ACL_WLAN_PS_MASTER_EDR] = 20,

			[CONF_SG_ACL_WLAN_PS_SLAVE_EDR] = 20,

			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_BR] = 20,

			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_BR] = 35,

			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_BR] = 16,

			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_BR] = 35,

			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MIN_EDR] = 32,

			[CONF_SG_ACL_WLAN_ACTIVE_MASTER_MAX_EDR] = 50,

			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MIN_EDR] = 28,

			[CONF_SG_ACL_WLAN_ACTIVE_SLAVE_MAX_EDR] = 50,

			[CONF_SG_ACL_ACTIVE_SCAN_WLAN_BR] = 10,

			[CONF_SG_ACL_ACTIVE_SCAN_WLAN_EDR] = 20,

			[CONF_SG_ACL_PASSIVE_SCAN_BT_BR] = 75,

			[CONF_SG_ACL_PASSIVE_SCAN_WLAN_BR] = 15,

			[CONF_SG_ACL_PASSIVE_SCAN_BT_EDR] = 27,

			[CONF_SG_ACL_PASSIVE_SCAN_WLAN_EDR] = 17,

			/* active scan params */

			[CONF_SG_AUTO_SCAN_PROBE_REQ] = 170,

			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3] = 50,

			[CONF_SG_ANTENNA_CONFIGURATION]             = 0,

			[CONF_SG_BEACON_MISS_PERCENT]               = 60,

			[CONF_SG_RATE_ADAPT_THRESH]                 = 12,

			[CONF_SG_RATE_ADAPT_SNR]                    = 0,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR]      = 10,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR]      = 30,

			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR]      = 8,

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR]       = 20,

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR]       = 50,

			/* Note: with UPSD, this should be 4 */

			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR]       = 8,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR]     = 7,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR]     = 25,

			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR]     = 20,

			/* Note: with UPDS, this should be 15 */

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR]      = 8,

			/* Note: with UPDS, this should be 50 */

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR]      = 40,

			/* Note: with UPDS, this should be 10 */

			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR]      = 20,

			[CONF_SG_RXT]                               = 1200,

			[CONF_SG_TXT]                               = 1000,

			[CONF_SG_ADAPTIVE_RXT_TXT]                  = 1,

			[CONF_SG_PS_POLL_TIMEOUT]                   = 10,

			[CONF_SG_UPSD_TIMEOUT]                      = 10,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR]  = 8,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR]  = 20,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR]  = 15,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR]         = 20,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR]         = 50,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR]         = 10,

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3]  = 200,

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,

			[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME]         = 75,

			[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME]       = 15,

			[CONF_SG_HV3_MAX_SERVED]                    = 6,

			[CONF_SG_DHCP_TIME]                         = 5000,

			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP] = 100,

		},

		.ap_params = {

			[CONF_SG_BT_PER_THRESHOLD]                  = 7500,

			[CONF_SG_HV3_MAX_OVERRIDE]                  = 0,

			[CONF_SG_BT_NFS_SAMPLE_INTERVAL]            = 400,

			[CONF_SG_BT_LOAD_RATIO]                     = 50,

			[CONF_SG_AUTO_PS_MODE]                      = 1,

			[CONF_SG_AUTO_SCAN_PROBE_REQ]               = 170,

			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3]   = 50,

			/* passive scan params */

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_BR] = 800,

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP_EDR] = 200,

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3] = 200,

			/* passive scan in dual antenna params */

			[CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN] = 0,

			[CONF_SG_BCN_HV3_COLLISION_THRESH_IN_PASSIVE_SCAN] = 0,

			[CONF_SG_TX_RX_PROTECTION_BWIDTH_IN_PASSIVE_SCAN] = 0,

			/* general params */

			[CONF_SG_STA_FORCE_PS_IN_BT_SCO] = 1,

			[CONF_SG_ANTENNA_CONFIGURATION] = 0,

			[CONF_SG_BEACON_MISS_PERCENT] = 60,

			[CONF_SG_RATE_ADAPT_THRESH]                 = 64,

			[CONF_SG_RATE_ADAPT_SNR]                    = 1,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_BR]      = 10,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_BR]      = 25,

			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_BR]      = 25,

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_BR]       = 20,

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_BR]       = 25,

			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_BR]       = 25,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MIN_EDR]     = 7,

			[CONF_SG_WLAN_PS_BT_ACL_MASTER_MAX_EDR]     = 25,

			[CONF_SG_WLAN_PS_MAX_BT_ACL_MASTER_EDR]     = 25,

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MIN_EDR]      = 8,

			[CONF_SG_WLAN_PS_BT_ACL_SLAVE_MAX_EDR]      = 25,

			[CONF_SG_WLAN_PS_MAX_BT_ACL_SLAVE_EDR]      = 25,

			[CONF_SG_DHCP_TIME] = 5000,

			[CONF_SG_RXT] = 1200,

			[CONF_SG_TXT] = 1000,

			[CONF_SG_ADAPTIVE_RXT_TXT] = 1,

			[CONF_SG_GENERAL_USAGE_BIT_MAP] = 3,

			[CONF_SG_HV3_MAX_SERVED] = 6,

			[CONF_SG_PS_POLL_TIMEOUT] = 10,

			[CONF_SG_UPSD_TIMEOUT] = 10,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MIN_EDR] = 7,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MASTER_MAX_EDR] = 15,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_MASTER_EDR] = 15,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MIN_EDR]  = 8,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_SLAVE_MAX_EDR]  = 20,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_SLAVE_EDR]  = 15,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MIN_BR]         = 20,

			[CONF_SG_WLAN_ACTIVE_BT_ACL_MAX_BR]         = 50,

			[CONF_SG_WLAN_ACTIVE_MAX_BT_ACL_BR]         = 10,

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3]  = 200,

			[CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_A2DP] = 800,

			[CONF_SG_PASSIVE_SCAN_A2DP_BT_TIME]         = 75,

			[CONF_SG_PASSIVE_SCAN_A2DP_WLAN_TIME]       = 15,

			[CONF_SG_HV3_MAX_SERVED]                    = 6,

			[CONF_SG_DHCP_TIME]                         = 5000,

			[CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_A2DP]  = 100,

			[CONF_SG_TEMP_PARAM_1]                      = 0,

			[CONF_SG_TEMP_PARAM_2]                      = 0,

			[CONF_SG_TEMP_PARAM_3]                      = 0,

			[CONF_SG_TEMP_PARAM_4]                      = 0,

			[CONF_SG_TEMP_PARAM_5]                      = 0,

			[CONF_SG_AP_BEACON_MISS_TX]                 = 3,

			[CONF_SG_RX_WINDOW_LENGTH]                  = 6,

			[CONF_SG_AP_CONNECTION_PROTECTION_TIME]     = 50,

			[CONF_SG_TEMP_PARAM_6]                      = 1,

			[CONF_SG_CONSECUTIVE_CTS_THRESHOLD] = 2,

			[CONF_SG_STA_RX_WINDOW_AFTER_DTIM] = 5,

			[CONF_SG_STA_CONNECTION_PROTECTION_TIME] = 30,

			/* AP params */

			[CONF_AP_BEACON_MISS_TX] = 3,

			[CONF_AP_RX_WINDOW_AFTER_BEACON] = 10,

			[CONF_AP_BEACON_WINDOW_INTERVAL] = 2,

			[CONF_AP_CONNECTION_PROTECTION_TIME] = 0,

			[CONF_AP_BT_ACL_VAL_BT_SERVE_TIME] = 25,

			[CONF_AP_BT_ACL_VAL_WL_SERVE_TIME] = 25,

		},

		.state = CONF_SG_PROTECTIVE,

	},