Commit 679b5f67 authored by Mike McCormack's avatar Mike McCormack Committed by Greg Kroah-Hartman
Browse files

staging: rtl8192e: Remove dead code 



Signed-off-by: default avatarMike McCormack <mikem@ring3k.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 3f9ab1ee

drivers/staging/rtl8192e/r8192E_dm.c

+0 −29
Original line number Diff line number Diff line
@@ -440,12 +440,9 @@ static void dm_check_rate_adaptive(struct net_device * dev) 
			}

		}



		// 2008.04.01

#if 1

		// For RTL819X, if pairwisekey = wep/tkip, we support only MCS0~7.

		if(priv->ieee80211->GetHalfNmodeSupportByAPsHandler(dev))

			targetRATR &=  0xf00fffff;

#endif



		//

		// Check whether updating of RATR0 is required
@@ -2088,7 +2085,6 @@ void dm_init_edca_turbo(struct net_device *dev) 
	priv->bis_cur_rdlstate = false;

}



#if 1

static void dm_check_edca_turbo(

	struct net_device * dev)

{
@@ -2106,10 +2102,8 @@ static void dm_check_edca_turbo( 
	// Do not be Turbo if it's under WiFi config and Qos Enabled, because the EDCA parameters

	// should follow the settings from QAP. By Bruce, 2007-12-07.

	//

	#if 1

	if(priv->ieee80211->state != IEEE80211_LINKED)

		goto dm_CheckEdcaTurbo_EXIT;

	#endif

	// We do not turn on EDCA turbo mode for some AP that has IOT issue

	if(priv->ieee80211->pHTInfo->IOTAction & HT_IOT_ACT_DISABLE_EDCA_TURBO)

		goto dm_CheckEdcaTurbo_EXIT;
@@ -2197,7 +2191,6 @@ static void dm_check_edca_turbo( 
	lastTxOkCnt = priv->stats.txbytesunicast;

	lastRxOkCnt = priv->stats.rxbytesunicast;

}

#endif



static void dm_init_ctstoself(struct net_device * dev)

{
@@ -2236,20 +2229,9 @@ static void dm_ctstoself(struct net_device *dev) 
			pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;

		}

		else	//uplink

		{

		#if 1

			pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;

		#else

			if(priv->undecorated_smoothed_pwdb < priv->ieee80211->CTSToSelfTH)	// disable CTS to self

			{

				pHTInfo->IOTAction &= ~HT_IOT_ACT_FORCED_CTS2SELF;

			}

			else if(priv->undecorated_smoothed_pwdb >= (priv->ieee80211->CTSToSelfTH+5))	// enable CTS to self

		{

			pHTInfo->IOTAction |= HT_IOT_ACT_FORCED_CTS2SELF;

		}

		#endif

		}



		lastTxOkCnt = priv->stats.txbytesunicast;

		lastRxOkCnt = priv->stats.rxbytesunicast;
@@ -2259,7 +2241,6 @@ static void dm_ctstoself(struct net_device *dev) 




/* Copy 8187B template for 9xseries */

#if 1

static void dm_check_rfctrl_gpio(struct net_device * dev)

{

#ifdef RTL8192E
@@ -2283,7 +2264,6 @@ static void dm_check_rfctrl_gpio(struct net_device * dev) 


}



#endif

/* Check if PBC button is pressed. */

static	void	dm_check_pbc_gpio(struct net_device *dev)

{
@@ -3152,7 +3132,6 @@ static void dm_check_txrateandretrycount(struct net_device * dev) 


static void dm_send_rssi_tofw(struct net_device *dev)

{

	DCMD_TXCMD_T			tx_cmd;

	struct r8192_priv *priv = ieee80211_priv(dev);



	// If we test chariot, we should stop the TX command ?
@@ -3160,13 +3139,5 @@ static void dm_send_rssi_tofw(struct net_device *dev) 
	// 0x1e0(byte) to botify driver.

	write_nic_byte(priv, DRIVER_RSSI, (u8)priv->undecorated_smoothed_pwdb);

	return;

#if 1

	tx_cmd.Op		= TXCMD_SET_RX_RSSI;

	tx_cmd.Length	= 4;

	tx_cmd.Value		= priv->undecorated_smoothed_pwdb;



	cmpk_message_handle_tx(dev, (u8*)&tx_cmd,

								DESC_PACKET_TYPE_INIT, sizeof(DCMD_TXCMD_T));

#endif

}

drivers/staging/rtl8192e/r8192E_wx.c

+1 −55
Original line number Diff line number Diff line
@@ -693,20 +693,6 @@ static int r8192_wx_set_enc(struct net_device *dev, 
				zero_addr[key_idx],

				0,                      //DefaultKey

				hwkey);                 //KeyContent



#if 0

			if(key_idx == 0){



				//write_nic_byte(dev, SECR, 7);

				setKey( dev,

					4,                      //EntryNo

					key_idx,                      //KeyIndex

					KEY_TYPE_WEP40,        //KeyType

					broadcast_addr,         //addr

					0,                      //DefaultKey

					hwkey);                 //KeyContent

			}

#endif

		}



		else if(wrqu->encoding.length==0xd){
@@ -719,44 +705,10 @@ static int r8192_wx_set_enc(struct net_device *dev, 
				zero_addr[key_idx],

				0,                      //DefaultKey

				hwkey);                 //KeyContent

#if 0

			if(key_idx == 0){



				//write_nic_byte(dev, SECR, 7);

				setKey( dev,

					4,                      //EntryNo

					key_idx,                      //KeyIndex

					KEY_TYPE_WEP104,        //KeyType

					broadcast_addr,         //addr

					0,                      //DefaultKey

					hwkey);                 //KeyContent

			}

#endif

		}

		else printk("wrong type in WEP, not WEP40 and WEP104\n");





	}



#if 0

	//consider the setting different key index situation

	//wrqu->encoding.flags = 801 means that we set key with index "1"

	if(wrqu->encoding.length==0 && (wrqu->encoding.flags >>8) == 0x8 ){

		printk("===>1\n");

		//write_nic_byte(dev, SECR, 7);

		EnableHWSecurityConfig8192(dev);

		//copy wpa config from default key(key0~key3) to broadcast key(key5)

		//

		key_idx = (wrqu->encoding.flags & 0xf)-1 ;

		write_cam(dev, (4*6),   0xffff0000|read_cam(dev, key_idx*6) );

		write_cam(dev, (4*6)+1, 0xffffffff);

		write_cam(dev, (4*6)+2, read_cam(dev, (key_idx*6)+2) );

		write_cam(dev, (4*6)+3, read_cam(dev, (key_idx*6)+3) );

		write_cam(dev, (4*6)+4, read_cam(dev, (key_idx*6)+4) );

		write_cam(dev, (4*6)+5, read_cam(dev, (key_idx*6)+5) );

	}

#endif



	priv->ieee80211->wx_set_enc = 0;



	return ret;
@@ -929,14 +881,8 @@ static int r8192_wx_set_enc_ext(struct net_device *dev, 
		u32 key[4] = {0};

		struct iw_encode_ext *ext = (struct iw_encode_ext *)extra;

		struct iw_point *encoding = &wrqu->encoding;

#if 0

		static u8 CAM_CONST_ADDR[4][6] = {

			{0x00, 0x00, 0x00, 0x00, 0x00, 0x00},

			{0x00, 0x00, 0x00, 0x00, 0x00, 0x01},

			{0x00, 0x00, 0x00, 0x00, 0x00, 0x02},

			{0x00, 0x00, 0x00, 0x00, 0x00, 0x03}};

#endif

		u8 idx = 0, alg = 0, group = 0;



		if ((encoding->flags & IW_ENCODE_DISABLED) ||

		ext->alg == IW_ENCODE_ALG_NONE) //none is not allowed to use hwsec WB 2008.07.01

		{

drivers/staging/rtl8192e/r8192_pm.c

+0 −38
Original line number Diff line number Diff line
@@ -36,43 +36,8 @@ int rtl8192E_suspend (struct pci_dev *pdev, pm_message_t state) 


	if (dev->netdev_ops->ndo_stop)

		dev->netdev_ops->ndo_stop(dev);

//	dev->stop(dev);

#if 0



	netif_carrier_off(dev);



	ieee80211_softmac_stop_protocol(priv->ieee80211);



	write_nic_byte(priv, MSR,(read_nic_byte(dev,MSR)&0xfc)|MSR_LINK_NONE);

	if(!priv->ieee80211->bSupportRemoteWakeUp) {

		/* disable tx/rx. In 8185 we write 0x10 (Reset bit),

		 * but here we make reference to WMAC and wirte 0x0.

		 * 2006.11.21 Emily

		 */

		write_nic_byte(dev, CMDR, 0);

	}

	//disable interrupt

	write_nic_dword(dev,INTA_MASK,0);

	priv->irq_enabled = 0;

        write_nic_dword(dev,ISR,read_nic_dword(dev, ISR));



	/* need to  free DM related functions */

	cancel_work_sync(&priv->reset_wq);

	del_timer_sync(&priv->fsync_timer);

	del_timer_sync(&priv->watch_dog_timer);

	cancel_delayed_work(&priv->watch_dog_wq);

	cancel_delayed_work(&priv->update_beacon_wq);

	cancel_work_sync(&priv->qos_activate);



	/* TODO

#if ((DEV_BUS_TYPE == PCI_INTERFACE) && (HAL_CODE_BASE == RTL8192))

pHalData->bHwRfOffAction = 2;

#endif

*/

#endif

	// Call MgntActSet_RF_State instead to prevent RF config race condition.

	// By Bruce, 2008-01-17.

	//

	if(!priv->ieee80211->bSupportRemoteWakeUp) {

		MgntActSet_RF_State(dev, eRfOff, RF_CHANGE_BY_INIT);

		// 2006.11.30. System reset bit
@@ -114,8 +79,6 @@ pHalData->bHwRfOffAction = 2; 
int rtl8192E_resume (struct pci_dev *pdev)

{

	struct net_device *dev = pci_get_drvdata(pdev);

	//struct r8192_priv *priv = ieee80211_priv(dev);

	//union iwreq_data wrqu;

	int err;

	u32 val;
@@ -155,7 +118,6 @@ int rtl8192E_resume (struct pci_dev *pdev) 
	if (dev->netdev_ops->ndo_open)

		dev->netdev_ops->ndo_open(dev);



//	dev->open(dev);

out:

        RT_TRACE(COMP_POWER, "<================r8192E resume call.\n");

	return 0;

drivers/staging/rtl8192e/r819xE_cmdpkt.c

+1 −50
Original line number Diff line number Diff line
@@ -189,55 +189,9 @@ cmpk_handle_tx_feedback( 


	priv->stats.txfeedback++;



	/* 0. Display received message. */

	//cmpk_Display_Message(CMPK_RX_TX_FB_SIZE, pMsg);



	/* 1. Extract TX feedback info from RFD to temp structure buffer. */

	/* It seems that FW use big endian(MIPS) and DRV use little endian in

	   windows OS. So we have to read the content byte by byte or transfer

	   endian type before copy the message copy. */

#if 0		// The TX FEEDBACK packet element address

	//rx_tx_fb.Element_ID 	= pMsg[0];

	//rx_tx_fb.Length 		= pMsg[1];

	rx_tx_fb.TOK 			= pMsg[2]>>7;

	rx_tx_fb.Fail_Reason 	= (pMsg[2] & 0x70) >> 4;

	rx_tx_fb.TID 			= (pMsg[2] & 0x0F);

	rx_tx_fb.Qos_Pkt 		= pMsg[3] >> 7;

	rx_tx_fb.Bandwidth 		= (pMsg[3] & 0x40) >> 6;

	rx_tx_fb.Retry_Cnt 		= pMsg[5];

	rx_tx_fb.Pkt_ID 		= (pMsg[6] << 8) | pMsg[7];

	rx_tx_fb.Seq_Num 		= (pMsg[8] << 8) | pMsg[9];

	rx_tx_fb.S_Rate 		= pMsg[10];

	rx_tx_fb.F_Rate 		= pMsg[11];

	rx_tx_fb.S_RTS_Rate 	= pMsg[12];

	rx_tx_fb.F_RTS_Rate 	= pMsg[13];

	rx_tx_fb.pkt_length	= (pMsg[14] << 8) | pMsg[15];

#endif

	/* 2007/07/05 MH Use pointer to transfer structure memory. */

	//memcpy((UINT8 *)&rx_tx_fb, pMsg, sizeof(CMPK_TXFB_T));

	memcpy((u8*)&rx_tx_fb, pmsg, sizeof(cmpk_txfb_t));

	/* 2. Use tx feedback info to count TX statistics. */

	/* Use tx feedback info to count TX statistics. */

	cmpk_count_txstatistic(dev, &rx_tx_fb);

#if 0

	/* 2007/07/11 MH Assign current operate rate.  */

	if (pAdapter->RegWirelessMode == WIRELESS_MODE_A ||

		pAdapter->RegWirelessMode == WIRELESS_MODE_B ||

		pAdapter->RegWirelessMode == WIRELESS_MODE_G)

	{

		pMgntInfo->CurrentOperaRate = (rx_tx_fb.F_Rate & 0x7F);

	}

	else if (pAdapter->RegWirelessMode == WIRELESS_MODE_N_24G ||

		 	 pAdapter->RegWirelessMode == WIRELESS_MODE_N_5G)

	{

		pMgntInfo->HTCurrentOperaRate = (rx_tx_fb.F_Rate & 0x8F);

	}

#endif

	/* 2007/01/17 MH Comment previous method for TX statistic function. */

	/* Collect info TX feedback packet to fill TCB. */

	/* We can not know the packet length and transmit type: broadcast or uni

	   or multicast. */

	//CountTxStatistics( pAdapter, &tcb );



}
@@ -257,9 +211,6 @@ cmpk_handle_interrupt_status( 


	DMESG("---> cmpk_Handle_Interrupt_Status()\n");



	/* 0. Display received message. */

	//cmpk_Display_Message(CMPK_RX_BEACON_STATE_SIZE, pMsg);



	/* 1. Extract TX feedback info from RFD to temp structure buffer. */

	/* It seems that FW use big endian(MIPS) and DRV use little endian in

	   windows OS. So we have to read the content byte by byte or transfer