Commit 67b3c27c authored by Auke Kok's avatar Auke Kok Committed by David S. Miller
Browse files

e1000: Dump the eeprom when a user encounters a bad checksum 



To help supporting users with a bad eeprom checksum, dump the
eeprom info when such a situation is encountered by a user.

Signed-off-by: default avatarAuke Kok <auke-jan.h.kok@intel.com>
Signed-off-by: default avatarJeff Garzik <jeff@garzik.org>
parent 8b32e63d

drivers/net/e1000/e1000_main.c

+74 −11
Original line number Diff line number Diff line
@@ -817,6 +817,64 @@ e1000_reset(struct e1000_adapter *adapter) 
	e1000_release_manageability(adapter);

}



/**

 *  Dump the eeprom for users having checksum issues

 **/

void e1000_dump_eeprom(struct e1000_adapter *adapter)

{

	struct net_device *netdev = adapter->netdev;

	struct ethtool_eeprom eeprom;

	const struct ethtool_ops *ops = netdev->ethtool_ops;

	u8 *data;

	int i;

	u16 csum_old, csum_new = 0;



	eeprom.len = ops->get_eeprom_len(netdev);

	eeprom.offset = 0;



	data = kmalloc(eeprom.len, GFP_KERNEL);

	if (!data) {

		printk(KERN_ERR "Unable to allocate memory to dump EEPROM"

		       " data\n");

		return;

	}



	ops->get_eeprom(netdev, &eeprom, data);



	csum_old = (data[EEPROM_CHECKSUM_REG * 2]) +

		   (data[EEPROM_CHECKSUM_REG * 2 + 1] << 8);

	for (i = 0; i < EEPROM_CHECKSUM_REG * 2; i += 2)

		csum_new += data[i] + (data[i + 1] << 8);

	csum_new = EEPROM_SUM - csum_new;



	printk(KERN_ERR "/*********************/\n");

	printk(KERN_ERR "Current EEPROM Checksum : 0x%04x\n", csum_old);

	printk(KERN_ERR "Calculated              : 0x%04x\n", csum_new);



	printk(KERN_ERR "Offset    Values\n");

	printk(KERN_ERR "========  ======\n");

	print_hex_dump(KERN_ERR, "", DUMP_PREFIX_OFFSET, 16, 1, data, 128, 0);



	printk(KERN_ERR "Include this output when contacting your support "

	       "provider.\n");

	printk(KERN_ERR "This is not a software error! Something bad "

	       "happened to your hardware or\n");

	printk(KERN_ERR "EEPROM image. Ignoring this "

	       "problem could result in further problems,\n");

	printk(KERN_ERR "possibly loss of data, corruption or system hangs!\n");

	printk(KERN_ERR "The MAC Address will be reset to 00:00:00:00:00:00, "

	       "which is invalid\n");

	printk(KERN_ERR "and requires you to set the proper MAC "

	       "address manually before continuing\n");

	printk(KERN_ERR "to enable this network device.\n");

	printk(KERN_ERR "Please inspect the EEPROM dump and report the issue "

	       "to your hardware vendor\n");

	printk(KERN_ERR "or Intel Customer Support: linux-nics@intel.com\n");

	printk(KERN_ERR "/*********************/\n");



	kfree(data);

}



/**

 * e1000_probe - Device Initialization Routine

 * @pdev: PCI device information struct
@@ -968,7 +1026,6 @@ e1000_probe(struct pci_dev *pdev, 
	adapter->en_mng_pt = e1000_enable_mng_pass_thru(&adapter->hw);



	/* initialize eeprom parameters */



	if (e1000_init_eeprom_params(&adapter->hw)) {

		E1000_ERR("EEPROM initialization failed\n");

		goto err_eeprom;
@@ -980,23 +1037,29 @@ e1000_probe(struct pci_dev *pdev, 
	e1000_reset_hw(&adapter->hw);



	/* make sure the EEPROM is good */



	if (e1000_validate_eeprom_checksum(&adapter->hw) < 0) {

		DPRINTK(PROBE, ERR, "The EEPROM Checksum Is Not Valid\n");

		goto err_eeprom;

	}



		e1000_dump_eeprom(adapter);

		/*

		 * set MAC address to all zeroes to invalidate and temporary

		 * disable this device for the user. This blocks regular

		 * traffic while still permitting ethtool ioctls from reaching

		 * the hardware as well as allowing the user to run the

		 * interface after manually setting a hw addr using

		 * `ip set address`

		 */

		memset(adapter->hw.mac_addr, 0, netdev->addr_len);

	} else {

		/* copy the MAC address out of the EEPROM */



		if (e1000_read_mac_addr(&adapter->hw))

			DPRINTK(PROBE, ERR, "EEPROM Read Error\n");

	}

	/* don't block initalization here due to bad MAC address */

	memcpy(netdev->dev_addr, adapter->hw.mac_addr, netdev->addr_len);

	memcpy(netdev->perm_addr, adapter->hw.mac_addr, netdev->addr_len);



	if (!is_valid_ether_addr(netdev->perm_addr)) {

	if (!is_valid_ether_addr(netdev->perm_addr))

		DPRINTK(PROBE, ERR, "Invalid MAC Address\n");

		goto err_eeprom;

	}



	e1000_get_bus_info(&adapter->hw);