Commit 699d0157 authored by Mike McCormack's avatar Mike McCormack Committed by Greg Kroah-Hartman
Browse files

staging: rtl8192e: Delete dead code 



Signed-off-by: default avatarMike McCormack <mikem@ring3k.org>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent db386800

drivers/staging/rtl8192e/r8192E_hw.h

+4 −318
Original line number Diff line number Diff line
@@ -21,7 +21,6 @@ 
#define R8180_HW



typedef enum _VERSION_8190{

	// RTL8190

	VERSION_8190_BD=0x3,

	VERSION_8190_BE

}VERSION_8190,*PVERSION_8190;
@@ -38,15 +37,7 @@ typedef enum _BaseBand_Config_Type{ 
	BaseBand_Config_PHY_REG = 0,			//Radio Path A

	BaseBand_Config_AGC_TAB = 1,			//Radio Path B

}BaseBand_Config_Type, *PBaseBand_Config_Type;

#if 0

typedef enum _RT_RF_TYPE_819xU{

	RF_TYPE_MIN = 0,

	RF_8225,

	RF_8256,

	RF_8258,

	RF_PSEUDO_11N = 4,

}RT_RF_TYPE_819xU, *PRT_RF_TYPE_819xU;

#endif



#define	RTL8187_REQT_READ	0xc0

#define	RTL8187_REQT_WRITE	0x40

#define	RTL8187_REQ_GET_REGS	0x05
@@ -55,8 +46,6 @@ typedef enum _RT_RF_TYPE_819xU{ 
#define R8180_MAX_RETRY 255

#define MAX_TX_URB 5

#define MAX_RX_URB 16

//#define MAX_RX_NORMAL_URB 3

//#define MAX_RX_COMMAND_URB 2

#define RX_URB_SIZE 9100



#define BB_ANTATTEN_CHAN14	0x0c
@@ -68,7 +57,6 @@ typedef enum _RT_RF_TYPE_819xU{ 
#define BB_HOST_BANG_RW (1<<3)

#define BB_HOST_BANG_DATA	 1



//#if (RTL819X_FPGA_VER & RTL819X_FPGA_VIVI_070920)

#define RTL8190_EEPROM_ID	0x8129

#define EEPROM_VID		0x02

#define EEPROM_DID		0x04
@@ -103,7 +91,7 @@ typedef enum _RT_RF_TYPE_819xU{ 
#define EEPROM_TxPwIndex_OFDM_24G	0x3A	//0x24~0x26



#define EEPROM_Default_TxPowerLevel		0x10

//#define EEPROM_ChannelPlan			0x7c	//0x7C



#define EEPROM_IC_VER				0x7d	//0x7D

#define EEPROM_CRC				0x7e	//0x7E~0x7F
@@ -117,7 +105,7 @@ typedef enum _RT_RF_TYPE_819xU{ 
#define EEPROM_CID_Pronet				0x7

#define EEPROM_CID_DLINK				0x8

#define EEPROM_CID_WHQL 				0xFE  //added by sherry for dtm, 20080728

//#endif



enum _RTL8192Pci_HW {

	MAC0 			= 0x000,

	MAC1 			= 0x001,
@@ -485,311 +473,9 @@ enum _RTL8192Pci_HW { 
	DRIVER_RSSI		= 0x32c,	// Driver tell Firmware current RSSI

	MCS_TXAGC		= 0x340, // MCS AGC

	CCK_TXAGC		= 0x348, // CCK AGC

//	IMR			= 0x354, // Interrupt Mask Register

//	IMR_POLL		= 0x360,

	MacBlkCtrl		= 0x403, // Mac block on/off control register



	//Cmd9346CR		= 0x00e,

//#define Cmd9346CR_9356SEL	(1<<4)

#if 0

/* 0x0006 - 0x0007 - reserved */

	RXFIFOCOUNT 		= 0x010,

	TXFIFOCOUNT 		= 0x012,

	BQREQ 			= 0x013,

/* 0x0010 - 0x0017 - reserved */

	TSFTR 			= 0x018,

	TLPDA 			= 0x020,

	TNPDA 			= 0x024,

	THPDA 			= 0x028,

	BSSID 			= 0x02E,

	RESP_RATE 		= 0x034,

	CMD 			= 0x037,

#define CMD_RST_SHIFT 4

#define CMD_RESERVED_MASK ((1<<1) | (1<<5) | (1<<6) | (1<<7))

#define CMD_RX_ENABLE_SHIFT 3

#define CMD_TX_ENABLE_SHIFT 2

#define CR_RST      ((1<< 4))

#define CR_RE       ((1<< 3))

#define CR_TE       ((1<< 2))

#define CR_MulRW    ((1<< 0))



	INTA 			= 0x03e,

#endif



///////////////////

//////////////////

#if 0

	TX_CONF 		= 0x040,

#define TX_CONF_HEADER_AUTOICREMENT_SHIFT 30

#define TX_LOOPBACK_SHIFT 17

#define TX_LOOPBACK_MAC 1

#define TX_LOOPBACK_BASEBAND 2

#define TX_LOOPBACK_NONE 0

#define TX_LOOPBACK_CONTINUE 3

#define TX_LOOPBACK_MASK ((1<<17)|(1<<18))

#define TX_LRLRETRY_SHIFT 0

#define TX_SRLRETRY_SHIFT 8

#define TX_NOICV_SHIFT 19

#define TX_NOCRC_SHIFT 16

#define TCR_DurProcMode  ((1<<30))

#define TCR_DISReqQsize  ((1<<28))

#define TCR_HWVERID_MASK ((1<<27)|(1<<26)|(1<<25))

#define TCR_HWVERID_SHIFT 25

#define TCR_SWPLCPLEN     ((1<<24))

#define TCR_PLCP_LEN TCR_SAT // rtl8180

#define TCR_MXDMA_MASK   ((1<<23)|(1<<22)|(1<<21))

#define TCR_MXDMA_1024 6

#define TCR_MXDMA_2048 7

#define TCR_MXDMA_SHIFT  21

#define TCR_DISCW   ((1<<20))

#define TCR_ICV     ((1<<19))

#define TCR_LBK     ((1<<18)|(1<<17))

#define TCR_LBK1    ((1<<18))

#define TCR_LBK0    ((1<<17))

#define TCR_CRC     ((1<<16))

#define TCR_SRL_MASK   ((1<<15)|(1<<14)|(1<<13)|(1<<12)|(1<<11)|(1<<10)|(1<<9)|(1<<8))

#define TCR_LRL_MASK   ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)|(1<<6)|(1<<7))

#define TCR_PROBE_NOTIMESTAMP_SHIFT 29 //rtl8185



	RX_CONF 		= 0x044,

#define MAC_FILTER_MASK ((1<<0) | (1<<1) | (1<<2) | (1<<3) | (1<<5) | \

(1<<12) | (1<<18) | (1<<19) | (1<<20) | (1<<21) | (1<<22) | (1<<23))

#define RX_CHECK_BSSID_SHIFT 23

#define ACCEPT_PWR_FRAME_SHIFT 22

#define ACCEPT_MNG_FRAME_SHIFT 20

#define ACCEPT_CTL_FRAME_SHIFT 19

#define ACCEPT_DATA_FRAME_SHIFT 18

#define ACCEPT_ICVERR_FRAME_SHIFT 12

#define ACCEPT_CRCERR_FRAME_SHIFT 5

#define ACCEPT_BCAST_FRAME_SHIFT 3

#define ACCEPT_MCAST_FRAME_SHIFT 2

#define ACCEPT_ALLMAC_FRAME_SHIFT 0

#define ACCEPT_NICMAC_FRAME_SHIFT 1

#define RX_FIFO_THRESHOLD_MASK ((1<<13) | (1<<14) | (1<<15))

#define RX_FIFO_THRESHOLD_SHIFT 13

#define RX_FIFO_THRESHOLD_128 3

#define RX_FIFO_THRESHOLD_256 4

#define RX_FIFO_THRESHOLD_512 5

#define RX_FIFO_THRESHOLD_1024 6

#define RX_FIFO_THRESHOLD_NONE 7

#define RX_AUTORESETPHY_SHIFT 28

#define MAX_RX_DMA_MASK ((1<<8) | (1<<9) | (1<<10))

#define MAX_RX_DMA_2048 7

#define MAX_RX_DMA_1024	6

#define MAX_RX_DMA_SHIFT 10

#define RCR_ONLYERLPKT ((1<<31))

#define RCR_CS_SHIFT   29

#define RCR_CS_MASK    ((1<<30) | (1<<29))

#define RCR_ENMARP     ((1<<28))

#define RCR_CBSSID     ((1<<23))

#define RCR_APWRMGT    ((1<<22))

#define RCR_ADD3       ((1<<21))

#define RCR_AMF        ((1<<20))

#define RCR_ACF        ((1<<19))

#define RCR_ADF        ((1<<18))

#define RCR_RXFTH      ((1<<15)|(1<<14)|(1<<13))

#define RCR_RXFTH2     ((1<<15))

#define RCR_RXFTH1     ((1<<14))

#define RCR_RXFTH0     ((1<<13))

#define RCR_AICV       ((1<<12))

#define RCR_MXDMA      ((1<<10)|(1<< 9)|(1<< 8))

#define RCR_MXDMA2     ((1<<10))

#define RCR_MXDMA1     ((1<< 9))

#define RCR_MXDMA0     ((1<< 8))

#define RCR_9356SEL    ((1<< 6))

#define RCR_ACRC32     ((1<< 5))

#define RCR_AB         ((1<< 3))

#define RCR_AM         ((1<< 2))

#define RCR_APM        ((1<< 1))

#define RCR_AAP        ((1<< 0))



	INT_TIMEOUT 		= 0x048,



	TX_BEACON_RING_ADDR 	= 0x04c,



#endif

#if 0

	CONFIG0 		= 0x051,

#define CONFIG0_WEP104     ((1<<6))

#define CONFIG0_LEDGPO_En  ((1<<4))

#define CONFIG0_Aux_Status ((1<<3))

#define CONFIG0_GL         ((1<<1)|(1<<0))

#define CONFIG0_GL1        ((1<<1))

#define CONFIG0_GL0        ((1<<0))

	CONFIG1 		= 0x052,

#define CONFIG1_LEDS       ((1<<7)|(1<<6))

#define CONFIG1_LEDS1      ((1<<7))

#define CONFIG1_LEDS0      ((1<<6))

#define CONFIG1_LWACT      ((1<<4))

#define CONFIG1_MEMMAP     ((1<<3))

#define CONFIG1_IOMAP      ((1<<2))

#define CONFIG1_VPD        ((1<<1))

#define CONFIG1_PMEn       ((1<<0))

	CONFIG2 		= 0x053,

#define CONFIG2_LCK        ((1<<7))

#define CONFIG2_ANT        ((1<<6))

#define CONFIG2_DPS        ((1<<3))

#define CONFIG2_PAPE_sign  ((1<<2))

#define CONFIG2_PAPE_time  ((1<<1)|(1<<0))

#define CONFIG2_PAPE_time1 ((1<<1))

#define CONFIG2_PAPE_time0 ((1<<0))

	ANA_PARAM 		= 0x054,

	CONFIG3 		= 0x059,

#define CONFIG3_GNTSel     ((1<<7))

#define CONFIG3_PARM_En    ((1<<6))

#define CONFIG3_Magic      ((1<<5))

#define CONFIG3_CardB_En   ((1<<3))

#define CONFIG3_CLKRUN_En  ((1<<2))

#define CONFIG3_FuncRegEn  ((1<<1))

#define CONFIG3_FBtbEn     ((1<<0))

#define CONFIG3_CLKRUN_SHIFT 2

#define CONFIG3_ANAPARAM_W_SHIFT 6

	CONFIG4 		= 0x05a,

#define CONFIG4_VCOPDN     ((1<<7))

#define CONFIG4_PWROFF     ((1<<6))

#define CONFIG4_PWRMGT     ((1<<5))

#define CONFIG4_LWPME      ((1<<4))

#define CONFIG4_LWPTN      ((1<<2))

#define CONFIG4_RFTYPE     ((1<<1)|(1<<0))

#define CONFIG4_RFTYPE1    ((1<<1))

#define CONFIG4_RFTYPE0    ((1<<0))

	TESTR 			= 0x05b,

#define TFPC_AC  0x05C



#define SCR 0x05F

	PGSELECT 		= 0x05e,

#define PGSELECT_PG_SHIFT 0

	SECURITY 		= 0x05f,

#define SECURITY_WEP_TX_ENABLE_SHIFT 1

#define SECURITY_WEP_RX_ENABLE_SHIFT 0

#define SECURITY_ENCRYP_104 1

#define SECURITY_ENCRYP_SHIFT 4

#define SECURITY_ENCRYP_MASK ((1<<4)|(1<<5))



	ANA_PARAM2 		= 0x060,

	BEACON_INTERVAL 	= 0x070,

#define BEACON_INTERVAL_MASK ((1<<0)|(1<<1)|(1<<2)|(1<<3)|(1<<4)|(1<<5)| \

(1<<6)|(1<<7)|(1<<8)|(1<<9))



	ATIM_WND 		= 0x072,

#define ATIM_WND_MASK      (0x01FF)



	BCN_INTR_ITV 		= 0x074,

#define BCN_INTR_ITV_MASK  (0x01FF)



	ATIM_INTR_ITV		= 0x076,

#define ATIM_INTR_ITV_MASK  (0x01FF)



	AckTimeOutReg      	= 0x079, //ACK timeout register, in unit of 4 us.

	PHY_ADR 		= 0x07c,

	PHY_READ 		= 0x07e,

	RFPinsOutput 		= 0x080,

	RFPinsEnable 		= 0x082,

//Page 0

	RFPinsSelect 		= 0x084,

#define SW_CONTROL_GPIO 0x400

	RFPinsInput 		= 0x086,

	RF_PARA 		= 0x088,

	RF_TIMING 		= 0x08c,

	GP_ENABLE 		= 0x090,

	GPIO 			= 0x091,

	TX_AGC_CTL 		= 0x09c,

#define TX_AGC_CTL_PER_PACKET_TXAGC	0x01

#define TX_AGC_CTL_PERPACKET_GAIN_SHIFT 0

#define TX_AGC_CTL_PERPACKET_ANTSEL_SHIFT 1

#define TX_AGC_CTL_FEEDBACK_ANT 2

#define TXAGC_CTL_PER_PACKET_ANT_SEL 0x02

	OFDM_TXAGC 		= 0x09e,

	ANTSEL 			= 0x09f,







	SIFS 			= 0x0b4,

	DIFS 			= 0x0b5,

	SLOT 			= 0x0b6,

	CW_CONF 		= 0x0bc,

#define CW_CONF_PERPACKET_RETRY_LIMIT 0x02

#define CW_CONF_PERPACKET_CW 0x01

#define CW_CONF_PERPACKET_RETRY_SHIFT 1

#define CW_CONF_PERPACKET_CW_SHIFT 0

	CW_VAL 			= 0x0bd,

	RATE_FALLBACK 		= 0x0be,

#define MAX_RESP_RATE_SHIFT 4

#define MIN_RESP_RATE_SHIFT 0

#define RATE_FALLBACK_CTL_ENABLE  0x80

#define RATE_FALLBACK_CTL_AUTO_STEP0 0x00

	ACM_CONTROL             = 0x0BF,      // ACM Control Registe

//----------------------------------------------------------------------------

//       8187B ACM_CONTROL bits						(Offset 0xBF, 1 Byte)

//----------------------------------------------------------------------------

#define VOQ_ACM_EN				(0x01 << 7) //BIT7

#define VIQ_ACM_EN				(0x01 << 6) //BIT6

#define BEQ_ACM_EN				(0x01 << 5) //BIT5

#define ACM_HW_EN				(0x01 << 4) //BIT4

#define TXOPSEL					(0x01 << 3) //BIT3

#define VOQ_ACM_CTL				(0x01 << 2) //BIT2 // Set to 1 when AC_VO used time reaches or exceeds the admitted time

#define VIQ_ACM_CTL				(0x01 << 1) //BIT1 // Set to 1 when AC_VI used time reaches or exceeds the admitted time

#define BEQ_ACM_CTL				(0x01 << 0) //BIT0 // Set to 1 when AC_BE used time reaches or exceeds the admitted time

	CONFIG5 		= 0x0D8,

#define CONFIG5_TX_FIFO_OK ((1<<7))

#define CONFIG5_RX_FIFO_OK ((1<<6))

#define CONFIG5_CALON      ((1<<5))

#define CONFIG5_EACPI      ((1<<2))

#define CONFIG5_LANWake    ((1<<1))

#define CONFIG5_PME_STS    ((1<<0))

	TX_DMA_POLLING 		= 0x0fd,

#define TX_DMA_POLLING_BEACON_SHIFT 7

#define TX_DMA_POLLING_HIPRIORITY_SHIFT 6

#define TX_DMA_POLLING_NORMPRIORITY_SHIFT 5

#define TX_DMA_POLLING_LOWPRIORITY_SHIFT 4

#define TX_DMA_STOP_BEACON_SHIFT 3

#define TX_DMA_STOP_HIPRIORITY_SHIFT 2

#define TX_DMA_STOP_NORMPRIORITY_SHIFT 1

#define TX_DMA_STOP_LOWPRIORITY_SHIFT 0

	CWR 			= 0x0DC,

	RetryCTR 		= 0x0DE,

	INT_MIG                 = 0x0E2,      // Interrupt Migration (0xE2 ~ 0xE3)

	TID_AC_MAP         	= 0x0E8,     // TID to AC Mapping Register

	ANA_PARAM3 		= 0x0EE,





//page 1

	Wakeup0 		= 0x084,

	Wakeup1 		= 0x08C,

	Wakeup2LD 		= 0x094,

	Wakeup2HD 		= 0x09C,

	Wakeup3LD 		= 0x0A4,

	Wakeup3HD 		= 0x0AC,

	Wakeup4LD 		= 0x0B4,

	Wakeup4HD 		= 0x0BC,

	CRC0 			= 0x0C4,

	CRC1 			= 0x0C6,

	CRC2 			= 0x0C8,

	CRC3 			= 0x0CA,

	CRC4 			= 0x0CC,

/* 0x00CE - 0x00D3 - reserved */



	RFSW_CTRL               = 0x272,   // 0x272-0x273.



/**************************************************************************/

	FER 			= 0x0F0,

	FEMR 			= 0x0F4,

	FPSR 			= 0x0F8,

	FFER 			= 0x0FC,



	AC_VO_PARAM             = 0x0F0,      // AC_VO Parameters Record

	AC_VI_PARAM             = 0x0F4,      // AC_VI Parameters Record

	AC_BE_PARAM             = 0x0F8,      // AC_BE Parameters Record

	AC_BK_PARAM             = 0x0FC,      // AC_BK Parameters Record

	TALLY_SEL 		= 0x0fc,

#endif

}

;

//----------------------------------------------------------------------------

//       818xB AnaParm & AnaParm2 Register

//----------------------------------------------------------------------------

//#define ANAPARM_ASIC_ON    0x45090658

//#define ANAPARM2_ASIC_ON   0x727f3f52

};



#define GPI 0x108

#define GPO 0x109