diff --git a/drivers/block/cciss.c b/drivers/block/cciss.c
index 9a9db6deefcd2afd754bc8e10b9cc1cbb9bbff3c..b22cec97ea194e148427f998a5c310bc3eedf262 100644
--- a/drivers/block/cciss.c
+++ b/drivers/block/cciss.c
@@ -2612,51 +2612,6 @@ static unsigned long pollcomplete(int ctlr)
return 1;
}
-static int add_sendcmd_reject(__u8 cmd, int ctlr, unsigned long complete)
-{
- /* We get in here if sendcmd() is polling for completions
- and gets some command back that it wasn't expecting --
- something other than that which it just sent down.
- Ordinarily, that shouldn't happen, but it can happen when
- the scsi tape stuff gets into error handling mode, and
- starts using sendcmd() to try to abort commands and
- reset tape drives. In that case, sendcmd may pick up
- completions of commands that were sent to logical drives
- through the block i/o system, or cciss ioctls completing, etc.
- In that case, we need to save those completions for later
- processing by the interrupt handler.
- */
-
-#ifdef CONFIG_CISS_SCSI_TAPE
- struct sendcmd_reject_list *srl = &hba[ctlr]->scsi_rejects;
-
- /* If it's not the scsi tape stuff doing error handling, (abort */
- /* or reset) then we don't expect anything weird. */
- if (cmd != CCISS_RESET_MSG && cmd != CCISS_ABORT_MSG) {
-#endif
- printk(KERN_WARNING "cciss cciss%d: SendCmd "
- "Invalid command list address returned! (%lx)\n",
- ctlr, complete);
- /* not much we can do. */
-#ifdef CONFIG_CISS_SCSI_TAPE
- return 1;
- }
-
- /* We've sent down an abort or reset, but something else
- has completed */
- if (srl->ncompletions >= (hba[ctlr]->nr_cmds + 2)) {
- /* Uh oh. No room to save it for later... */
- printk(KERN_WARNING "cciss%d: Sendcmd: Invalid command addr, "
- "reject list overflow, command lost!\n", ctlr);
- return 1;
- }
- /* Save it for later */
- srl->complete[srl->ncompletions] = complete;
- srl->ncompletions++;
-#endif
- return 0;
-}
-
/* Send command c to controller h and poll for it to complete.
* Turns interrupts off on the board. Used at driver init time
* and during SCSI error recovery.
@@ -2701,11 +2656,10 @@ static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c)
break;
}
- /* If it's not the cmd we're looking for, save it for later */
+ /* Make sure it's the command we're expecting. */
if ((complete & ~CISS_ERROR_BIT) != c->busaddr) {
- if (add_sendcmd_reject(c->Request.CDB[0],
- h->ctlr, complete) != 0)
- BUG(); /* we are hosed if we get here. */
+ printk(KERN_WARNING "cciss%d: Unexpected command "
+ "completion.\n", h->ctlr);
continue;
}
@@ -2770,11 +2724,6 @@ static int sendcmd_core(ctlr_info_t *h, CommandList_struct *c)
buff_dma_handle.val32.upper = c->SG[0].Addr.upper;
pci_unmap_single(h->pdev, (dma_addr_t) buff_dma_handle.val,
c->SG[0].Len, PCI_DMA_BIDIRECTIONAL);
-#ifdef CONFIG_CISS_SCSI_TAPE
- /* if we saved some commands for later, process them now. */
- if (h->scsi_rejects.ncompletions > 0)
- do_cciss_intr(0, h);
-#endif
return status;
}
@@ -3195,44 +3144,18 @@ static void do_cciss_request(struct request_queue *q)
static inline unsigned long get_next_completion(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- /* Any rejects from sendcmd() lying around? Process them first */
- if (h->scsi_rejects.ncompletions == 0)
- return h->access.command_completed(h);
- else {
- struct sendcmd_reject_list *srl;
- int n;
- srl = &h->scsi_rejects;
- n = --srl->ncompletions;
- /* printk("cciss%d: processing saved reject\n", h->ctlr); */
- printk("p");
- return srl->complete[n];
- }
-#else
return h->access.command_completed(h);
-#endif
}
static inline int interrupt_pending(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- return (h->access.intr_pending(h)
- || (h->scsi_rejects.ncompletions > 0));
-#else
return h->access.intr_pending(h);
-#endif
}
static inline long interrupt_not_for_us(ctlr_info_t *h)
{
-#ifdef CONFIG_CISS_SCSI_TAPE
- return (((h->access.intr_pending(h) == 0) ||
- (h->interrupts_enabled == 0))
- && (h->scsi_rejects.ncompletions == 0));
-#else
return (((h->access.intr_pending(h) == 0) ||
(h->interrupts_enabled == 0)));
-#endif
}
static irqreturn_t do_cciss_intr(int irq, void *dev_id)
@@ -4054,15 +3977,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
printk(KERN_ERR "cciss: out of memory");
goto clean4;
}
-#ifdef CONFIG_CISS_SCSI_TAPE
- hba[i]->scsi_rejects.complete =
- kmalloc(sizeof(hba[i]->scsi_rejects.complete[0]) *
- (hba[i]->nr_cmds + 5), GFP_KERNEL);
- if (hba[i]->scsi_rejects.complete == NULL) {
- printk(KERN_ERR "cciss: out of memory");
- goto clean4;
- }
-#endif
spin_lock_init(&hba[i]->lock);
/* Initialize the pdev driver private data.
@@ -4122,9 +4036,6 @@ static int __devinit cciss_init_one(struct pci_dev *pdev,
clean4:
kfree(inq_buff);
-#ifdef CONFIG_CISS_SCSI_TAPE
- kfree(hba[i]->scsi_rejects.complete);
-#endif
kfree(hba[i]->cmd_pool_bits);
if (hba[i]->cmd_pool)
pci_free_consistent(hba[i]->pdev,
@@ -4242,9 +4153,6 @@ static void __devexit cciss_remove_one(struct pci_dev *pdev)
pci_free_consistent(hba[i]->pdev, hba[i]->nr_cmds * sizeof(ErrorInfo_struct),
hba[i]->errinfo_pool, hba[i]->errinfo_pool_dhandle);
kfree(hba[i]->cmd_pool_bits);
-#ifdef CONFIG_CISS_SCSI_TAPE
- kfree(hba[i]->scsi_rejects.complete);
-#endif
/*
* Deliberately omit pci_disable_device(): it does something nasty to
* Smart Array controllers that pci_enable_device does not undo
diff --git a/drivers/block/cciss.h b/drivers/block/cciss.h
index 25cd58e250219010a5a91bb3237f41774a52b14c..06a5db25b298ebf400c99ac1c8fa200e208d10ae 100644
--- a/drivers/block/cciss.h
+++ b/drivers/block/cciss.h
@@ -53,14 +53,6 @@ typedef struct _drive_info_struct
char rev[REV_LEN + 1]; /* SCSI revision string */
} drive_info_struct;
-#ifdef CONFIG_CISS_SCSI_TAPE
-
-struct sendcmd_reject_list {
- int ncompletions;
- unsigned long *complete; /* array of NR_CMDS tags */
-};
-
-#endif
struct ctlr_info
{
int ctlr;
@@ -128,7 +120,6 @@ struct ctlr_info
void *scsi_ctlr; /* ptr to structure containing scsi related stuff */
/* list of block side commands the scsi error handling sucked up */
/* and saved for later processing */
- struct sendcmd_reject_list scsi_rejects;
#endif
unsigned char alive;
struct completion *rescan_wait;