Commit 777c5e94 authored by Fernando Apesteguia's avatar Fernando Apesteguia Committed by Greg Kroah-Hartman
Browse files

staging: dgnc: Fix lines longer than 80 characters 



All the chunks of the patch apply to comments save the first one.

Signed-off-by: default avatarFernando Apesteguia <fernando.apesteguia@gmail.com>
Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@linuxfoundation.org>
parent 7b346dac

drivers/staging/dgnc/dgnc_neo.c

+46 −21
Original line number Diff line number Diff line
@@ -449,7 +449,8 @@ static inline void neo_parse_isr(struct dgnc_board *brd, uint port) 
							       flags);

				}

			} else if (cause == UART_17158_XOFF_DETECT) {

				if (!(brd->channels[port]->ch_flags & CH_STOP)) {

				if (!(brd->channels[port]->ch_flags &

				      CH_STOP)) {

					spin_lock_irqsave(&ch->ch_lock,

							  flags);

					ch->ch_flags |= CH_STOP;
@@ -554,7 +555,8 @@ static inline void neo_parse_lsr(struct dgnc_board *brd, uint port) 
		 * Rx Oruns. Exar says that an orun will NOT corrupt

		 * the FIFO. It will just replace the holding register

		 * with this new data byte. So basically just ignore this.

		 * Probably we should eventually have an orun stat in our driver...

		 * Probably we should eventually have an orun stat in our

		 * driver...

		 */

		ch->ch_err_overrun++;

	}
@@ -949,14 +951,18 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) 


	/*

	 * If 0, no interrupts pending.

	 * This can happen if the IRQ is shared among a couple Neo/Classic boards.

	 * This can happen if the IRQ is shared among a couple Neo/Classic

	 * boards.

	 */

	if (!uart_poll) {

		spin_unlock_irqrestore(&brd->bd_intr_lock, flags);

		return IRQ_NONE;

	}



	/* At this point, we have at least SOMETHING to service, dig further... */

	/*

	 * At this point, we have at least SOMETHING to service, dig

	 * further...

	 */



	/* Loop on each port */

	while ((uart_poll & 0xff) != 0) {
@@ -980,7 +986,10 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) 
			ch = brd->channels[port];

			neo_copy_data_from_uart_to_queue(ch);



			/* Call our tty layer to enforce queue flow control if needed. */

			/*

			 * Call our tty layer to enforce queue flow control if

			 * needed.

			 */

			spin_lock_irqsave(&ch->ch_lock, flags2);

			dgnc_check_queue_flow_control(ch);

			spin_unlock_irqrestore(&ch->ch_lock, flags2);
@@ -996,16 +1005,18 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) 


		case UART_17158_TXRDY:

			/*

			 * TXRDY interrupt clears after reading ISR register for the UART channel.

			 * TXRDY interrupt clears after reading ISR register

			 * for the UART channel.

			 */



			/*

			 * Yes, this is odd...

			 * Why would I check EVERY possibility of type of

			 * interrupt, when we know its TXRDY???

			 * Becuz for some reason, even tho we got triggered for TXRDY,

			 * it seems to be occasionally wrong. Instead of TX, which

			 * it should be, I was getting things like RXDY too. Weird.

			 * Becuz for some reason, even tho we got triggered for

			 * TXRDY, it seems to be occasionally wrong. Instead of

			 * TX, which it should be, I was getting things like

			 * RXDY too. Weird.

			 */

			neo_parse_isr(brd, port);

			break;
@@ -1020,8 +1031,8 @@ static irqreturn_t neo_intr(int irq, void *voidbrd) 
		default:

			/*

			 * The UART triggered us with a bogus interrupt type.

			 * It appears the Exar chip, when REALLY bogged down, will throw

			 * these once and awhile.

			 * It appears the Exar chip, when REALLY bogged down,

			 * will throw these once and awhile.

			 * Its harmless, just ignore it and move on.

			 */

			break;
@@ -1239,7 +1250,8 @@ static void neo_copy_data_from_uart_to_queue(struct channel_t *ch) 
		}



		/*

		 * If our queue is full, we have no choice but to drop some data.

		 * If our queue is full, we have no choice but to drop some

		 * data.

		 * The assumption is that HWFLOW or SWFLOW should have stopped

		 * things way way before we got to this point.

		 *
@@ -1332,7 +1344,10 @@ static void neo_flush_uart_write(struct channel_t *ch) 
	neo_pci_posting_flush(ch->ch_bd);



	for (i = 0; i < 10; i++) {

		/* Check to see if the UART feels it completely flushed the FIFO. */

		/*

		 * Check to see if the UART feels it completely flushed the

		 * FIFO.

		 */

		tmp = readb(&ch->ch_neo_uart->isr_fcr);

		if (tmp & 4)

			udelay(10);
@@ -1361,7 +1376,10 @@ static void neo_flush_uart_read(struct channel_t *ch) 
	neo_pci_posting_flush(ch->ch_bd);



	for (i = 0; i < 10; i++) {

		/* Check to see if the UART feels it completely flushed the FIFO. */

		/*

		 * Check to see if the UART feels it completely flushed the

		 * FIFO.

		 */

		tmp = readb(&ch->ch_neo_uart->isr_fcr);

		if (tmp & 2)

			udelay(10);
@@ -1406,8 +1424,9 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) 
			ch->ch_cached_lsr &= ~(UART_LSR_THRE);



			/*

			 * If RTS Toggle mode is on, turn on RTS now if not already set,

			 * and make sure we get an event when the data transfer has completed.

			 * If RTS Toggle mode is on, turn on RTS now if not

			 * already set, and make sure we get an event when the

			 * data transfer has completed.

			 */

			if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {

				if (!(ch->ch_mostat & UART_MCR_RTS)) {
@@ -1417,8 +1436,9 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) 
				ch->ch_tun.un_flags |= (UN_EMPTY);

			}

			/*

			 * If DTR Toggle mode is on, turn on DTR now if not already set,

			 * and make sure we get an event when the data transfer has completed.

			 * If DTR Toggle mode is on, turn on DTR now if not

			 * already set, and make sure we get an event when the

			 * data transfer has completed.

			 */

			if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {

				if (!(ch->ch_mostat & UART_MCR_DTR)) {
@@ -1474,7 +1494,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) 


		/*

		 * If RTS Toggle mode is on, turn on RTS now if not already set,

		 * and make sure we get an event when the data transfer has completed.

		 * and make sure we get an event when the data transfer has

		 * completed.

		 */

		if (ch->ch_digi.digi_flags & DIGI_RTS_TOGGLE) {

			if (!(ch->ch_mostat & UART_MCR_RTS)) {
@@ -1486,7 +1507,8 @@ static void neo_copy_data_from_queue_to_uart(struct channel_t *ch) 


		/*

		 * If DTR Toggle mode is on, turn on DTR now if not already set,

		 * and make sure we get an event when the data transfer has completed.

		 * and make sure we get an event when the data transfer has

		 * completed.

		 */

		if (ch->ch_digi.digi_flags & DIGI_DTR_TOGGLE) {

			if (!(ch->ch_mostat & UART_MCR_DTR)) {
@@ -1550,7 +1572,10 @@ static void neo_parse_modem(struct channel_t *ch, unsigned char signals) 
		}

	}



	/* Scrub off lower bits. They signify delta's, which I don't care about */

	/*

	 * Scrub off lower bits. They signify delta's, which I don't care

	 * about

	 */

	msignals &= 0xf0;



	if (msignals & UART_MSR_DCD)