Commit 80ce22e5 authored by Rudraksha Gupta's avatar Rudraksha Gupta Committed by Bjorn Andersson
Browse files

ARM: dts: qcom: msm8960: Add USB node 



Add the required nodes to support USB on the MSM8960 SoC. As it's very
similar to the APQ8064 SoC, the nodes are almost identical

Add a label to sleep_clk for the USB node to reference

Signed-off-by: default avatarRudraksha Gupta <guptarud@gmail.com>
Signed-off-by: default avatarBjorn Andersson <andersson@kernel.org>
Link: https://lore.kernel.org/r/20230607050025.86636-4-guptarud@gmail.com
parent 7b8f119a

arch/arm/boot/dts/qcom-msm8960.dtsi

+33 −1
Original line number Diff line number Diff line
@@ -3,6 +3,7 @@ 


#include <dt-bindings/interrupt-controller/arm-gic.h>

#include <dt-bindings/clock/qcom,gcc-msm8960.h>

#include <dt-bindings/reset/qcom,gcc-msm8960.h>

#include <dt-bindings/clock/qcom,lcc-msm8960.h>

#include <dt-bindings/mfd/qcom-rpm.h>

#include <dt-bindings/soc/qcom,gsbi.h>
@@ -71,7 +72,7 @@ pxo_board: pxo_board { 
			clock-output-names = "pxo_board";

		};



		sleep_clk {

		sleep_clk: sleep_clk {

			compatible = "fixed-clock";

			#clock-cells = <0>;

			clock-frequency = <32768>;
@@ -370,5 +371,36 @@ gsbi1_spi: spi@16080000 { 
				status = "disabled";

			};

		};



		usb1: usb@12500000 {

			compatible = "qcom,ci-hdrc";

			reg = <0x12500000 0x200>,

			      <0x12500200 0x200>;

			interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;

			clocks = <&gcc USB_HS1_XCVR_CLK>, <&gcc USB_HS1_H_CLK>;

			clock-names = "core", "iface";

			assigned-clocks = <&gcc USB_HS1_XCVR_CLK>;

			assigned-clock-rates = <60000000>;

			resets = <&gcc USB_HS1_RESET>;

			reset-names = "core";

			phy_type = "ulpi";

			ahb-burst-config = <0>;

			phys = <&usb_hs1_phy>;

			phy-names = "usb-phy";

			#reset-cells = <1>;

			status = "disabled";



			ulpi {

				usb_hs1_phy: phy {

					compatible = "qcom,usb-hs-phy-msm8960",

						     "qcom,usb-hs-phy";

					clocks = <&sleep_clk>, <&cxo_board>;

					clock-names = "sleep", "ref";

					resets = <&usb1 0>;

					reset-names = "por";

					#phy-cells = <0>;

				};

			};

		};

	};

};