Commit 96ff264b authored by Johan Jonker's avatar Johan Jonker Committed by Heiko Stuebner
Browse files

arm64: dts: rockchip: add reg property to brcmf sub-nodes 



An experimental test with the command below gives this error:
rk3399-firefly.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-orangepi.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-captain.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
rk3399-khadas-edge-v.dt.yaml: dwmmc@fe310000: wifi@1:
'reg' is a required property
So fix this by adding a reg property to the brcmf sub node.
Also add #address-cells and #size-cells to prevent more warnings.

make ARCH=arm64 dtbs_check
DT_SCHEMA_FILES=Documentation/devicetree/bindings/mmc/rockchip-dw-mshc.yaml

Signed-off-by: default avatarJohan Jonker <jbx6244@gmail.com>
Link: https://lore.kernel.org/r/20200110142128.13522-1-jbx6244@gmail.com


Signed-off-by: default avatarHeiko Stuebner <heiko@sntech.de>
parent 2be6a280

arch/arm64/boot/dts/rockchip/rk3399-firefly.dts

+3 −0
Original line number Diff line number Diff line
@@ -668,9 +668,12 @@ &sdio0 { 
	vqmmc-supply = &vcc1v8_s3;	/* IO line */

	vmmc-supply = &vcc_sdio;	/* card's power */



	#address-cells = <1>;

	#size-cells = <0>;

	status = "okay";



	brcmf: wifi@1 {

		reg = <1>;

		compatible = "brcm,bcm4329-fmac";

		interrupt-parent = <&gpio0>;

		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/rockchip/rk3399-khadas-edge.dtsi

+3 −0
Original line number Diff line number Diff line
@@ -654,9 +654,12 @@ &sdio0 { 
	sd-uhs-sdr104;

	vqmmc-supply = <&vcc1v8_s3>;

	vmmc-supply = <&vccio_sd>;

	#address-cells = <1>;

	#size-cells = <0>;

	status = "okay";



	brcmf: wifi@1 {

		reg = <1>;

		compatible = "brcm,bcm4329-fmac";

		interrupt-parent = <&gpio0>;

		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;

arch/arm64/boot/dts/rockchip/rk3399-orangepi.dts

+3 −0
Original line number Diff line number Diff line
@@ -648,9 +648,12 @@ &sdio0 { 
	pinctrl-names = "default";

	pinctrl-0 = <&sdio0_bus4 &sdio0_cmd &sdio0_clk>;

	sd-uhs-sdr104;

	#address-cells = <1>;

	#size-cells = <0>;

	status = "okay";



	brcmf: wifi@1 {

		reg = <1>;

		compatible = "brcm,bcm4329-fmac";

		interrupt-parent = <&gpio0>;

		interrupts = <RK_PA3 GPIO_ACTIVE_HIGH>;