docs: misc-devices: convert files without extension to ReST (9b5db89e) · Commits · jan.koester / Linux

Documentation/misc-devices/eeprom→Documentation/misc-devices/eeprom.rst

+19 −8

Original line number	Original line	Diff line number	Diff line
			====================
	Kernel driver eeprom		Kernel driver eeprom
	====================		====================

	Supported chips:		Supported chips:

	* Any EEPROM chip in the designated address range		* Any EEPROM chip in the designated address range

	Prefix: 'eeprom'		Prefix: 'eeprom'

	Addresses scanned: I2C 0x50 - 0x57		Addresses scanned: I2C 0x50 - 0x57

	Datasheets: Publicly available from:		Datasheets: Publicly available from:

	Atmel (www.atmel.com),		Atmel (www.atmel.com),
	Catalyst (www.catsemi.com),		Catalyst (www.catsemi.com),
	Fairchild (www.fairchildsemi.com),		Fairchild (www.fairchildsemi.com),
	@@ -16,7 +22,9 @@ Supported chips:
	Xicor (www.xicor.com),		Xicor (www.xicor.com),
	and others.		and others.

			========= ============= ============================================
	Chip Size (bits) Address		Chip Size (bits) Address
			========= ============= ============================================
	24C01 1K 0x50 (shadows at 0x51 - 0x57)		24C01 1K 0x50 (shadows at 0x51 - 0x57)
	24C01A 1K 0x50 - 0x57 (Typical device on DIMMs)		24C01A 1K 0x50 - 0x57 (Typical device on DIMMs)
	24C02 2K 0x50 - 0x57		24C02 2K 0x50 - 0x57
	@@ -33,14 +41,15 @@ Supported chips:
	Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37		Fairchild 34W02 2K 0x50 - 0x57, SW write protect at 0x30-37
	Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37		Microchip 24AA52 2K 0x50 - 0x57, SW write protect at 0x30-37
	ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37		ST M34C02 2K 0x50 - 0x57, SW write protect at 0x30-37
			========= ============= ============================================


	Authors:		Authors:
	Frodo Looijaard <frodol@dds.nl>,		- Frodo Looijaard <frodol@dds.nl>,
	Philip Edelbrock <phil@netroedge.com>,		- Philip Edelbrock <phil@netroedge.com>,
	Jean Delvare <jdelvare@suse.de>,		- Jean Delvare <jdelvare@suse.de>,
	Greg Kroah-Hartman <greg@kroah.com>,		- Greg Kroah-Hartman <greg@kroah.com>,
	IBM Corp.		- IBM Corp.

	Description		Description
	-----------		-----------
	@@ -74,7 +83,8 @@ this address will write protect the memory array permanently, and the
	device will no longer respond at the 0x30-37 address. The eeprom driver		device will no longer respond at the 0x30-37 address. The eeprom driver
	does not support this register.		does not support this register.

	Lacking functionality:		Lacking functionality
			---------------------

	* Full support for larger devices (24C04, 24C08, 24C16). These are not		* Full support for larger devices (24C04, 24C08, 24C16). These are not
	typically found on a PC. These devices will appear as separate devices at		typically found on a PC. These devices will appear as separate devices at
	@@ -88,9 +98,10 @@ to change the contents of the EEPROMs (on DIMMs anyway) also makes it easy
	to disable the DIMMs (potentially preventing the computer from booting)		to disable the DIMMs (potentially preventing the computer from booting)
	until the values are restored somehow.		until the values are restored somehow.

	Use:		Use
			---

	After inserting the module (and any other required SMBus/i2c modules), you		After inserting the module (and any other required SMBus/i2c modules), you
	should have some EEPROM directories in /sys/bus/i2c/devices/* of names such		should have some EEPROM directories in ``/sys/bus/i2c/devices/*`` of names such
	as "0-0050". Inside each of these is a series of files, the eeprom file		as "0-0050". Inside each of these is a series of files, the eeprom file
	contains the binary data from EEPROM.		contains the binary data from EEPROM.

Documentation/misc-devices/ics932s401→Documentation/misc-devices/ics932s401.rst

+6 −1

Original line number	Original line	Diff line number	Diff line
			========================
	Kernel driver ics932s401		Kernel driver ics932s401
	======================		========================

	Supported chips:		Supported chips:

	* IDT ICS932S401		* IDT ICS932S401

	Prefix: 'ics932s401'		Prefix: 'ics932s401'

	Addresses scanned: I2C 0x69		Addresses scanned: I2C 0x69

	Datasheet: Publicly available at the IDT website		Datasheet: Publicly available at the IDT website

	Author: Darrick J. Wong		Author: Darrick J. Wong

Documentation/misc-devices/index.rst

+5 −0

Original line number	Original line	Diff line number	Diff line
	@@ -14,4 +14,9 @@ fit into other categories.
	.. toctree::		.. toctree::
	:maxdepth: 2		:maxdepth: 2

			eeprom
	ibmvmc		ibmvmc
			ics932s401
			isl29003
			lis3lv02d
			max6875

Documentation/misc-devices/isl29003→Documentation/misc-devices/isl29003.rst

+14 −1

Original line number	Original line	Diff line number	Diff line
			======================
	Kernel driver isl29003		Kernel driver isl29003
	=====================		======================

	Supported chips:		Supported chips:

	* Intersil ISL29003		* Intersil ISL29003

	Prefix: 'isl29003'		Prefix: 'isl29003'

	Addresses scanned: none		Addresses scanned: none

	Datasheet:		Datasheet:
	http://www.intersil.com/data/fn/fn7464.pdf		http://www.intersil.com/data/fn/fn7464.pdf

	@@ -37,25 +42,33 @@ Sysfs entries
	-------------		-------------

	range:		range:
			== ===========================
	0: 0 lux to 1000 lux (default)		0: 0 lux to 1000 lux (default)
	1: 0 lux to 4000 lux		1: 0 lux to 4000 lux
	2: 0 lux to 16,000 lux		2: 0 lux to 16,000 lux
	3: 0 lux to 64,000 lux		3: 0 lux to 64,000 lux
			== ===========================

	resolution:		resolution:
			== =====================
	0: 2^16 cycles (default)		0: 2^16 cycles (default)
	1: 2^12 cycles		1: 2^12 cycles
	2: 2^8 cycles		2: 2^8 cycles
	3: 2^4 cycles		3: 2^4 cycles
			== =====================

	mode:		mode:
			== =================================================
	0: diode1's current (unsigned 16bit) (default)		0: diode1's current (unsigned 16bit) (default)
	1: diode1's current (unsigned 16bit)		1: diode1's current (unsigned 16bit)
	2: difference between diodes (l1 - l2, signed 15bit)		2: difference between diodes (l1 - l2, signed 15bit)
			== =================================================

	power_state:		power_state:
			== =================================================
	0: device is disabled (default)		0: device is disabled (default)
	1: device is enabled		1: device is enabled
			== =================================================

	lux (read only):		lux (read only):
	returns the value from the last sensor reading		returns the value from the last sensor reading

Documentation/misc-devices/lis3lv02d→Documentation/misc-devices/lis3lv02d.rst

+11 −5

Original line number	Original line	Diff line number	Diff line
			=======================
	Kernel driver lis3lv02d		Kernel driver lis3lv02d
	=======================		=======================

	@@ -8,8 +9,8 @@ Supported chips:
	LIS331DLH (16 bits)		LIS331DLH (16 bits)

	Authors:		Authors:
	Yan Burman <burman.yan@gmail.com>		- Yan Burman <burman.yan@gmail.com>
	Eric Piel <eric.piel@tremplin-utc.net>		- Eric Piel <eric.piel@tremplin-utc.net>


	Description		Description
	@@ -25,11 +26,15 @@ neverball). The accelerometer data is readable via
	to mg values (1/1000th of earth gravity).		to mg values (1/1000th of earth gravity).

	Sysfs attributes under /sys/devices/platform/lis3lv02d/:		Sysfs attributes under /sys/devices/platform/lis3lv02d/:
	position - 3D position that the accelerometer reports. Format: "(x,y,z)"
	rate - read reports the sampling rate of the accelerometer device in HZ.		position
			- 3D position that the accelerometer reports. Format: "(x,y,z)"
			rate
			- read reports the sampling rate of the accelerometer device in HZ.
	write changes sampling rate of the accelerometer device.		write changes sampling rate of the accelerometer device.
	Only values which are supported by HW are accepted.		Only values which are supported by HW are accepted.
	selftest - performs selftest for the chip as specified by chip manufacturer.		selftest
			- performs selftest for the chip as specified by chip manufacturer.

	This driver also provides an absolute input class device, allowing		This driver also provides an absolute input class device, allowing
	the laptop to act as a pinball machine-esque joystick. Joystick device can be		the laptop to act as a pinball machine-esque joystick. Joystick device can be
	@@ -69,6 +74,7 @@ Axes orientation
	For better compatibility between the various laptops. The values reported by		For better compatibility between the various laptops. The values reported by
	the accelerometer are converted into a "standard" organisation of the axes		the accelerometer are converted into a "standard" organisation of the axes
	(aka "can play neverball out of the box"):		(aka "can play neverball out of the box"):

	* When the laptop is horizontal the position reported is about 0 for X and Y		* When the laptop is horizontal the position reported is about 0 for X and Y
	and a positive value for Z		and a positive value for Z
	* If the left side is elevated, X increases (becomes positive)		* If the left side is elevated, X increases (becomes positive)