Commit 9d8ea6be authored by Bjorn Andersson's avatar Bjorn Andersson Committed by Linus Walleij
Browse files

dt-bindings: pinctrl: qcom: Add QCS404 pinctrl binding 



Add the binding for the TLMM pinctrl block found in the QCS404 platform.

Signed-off-by: default avatarBjorn Andersson <bjorn.andersson@linaro.org>
Reviewed-by: default avatarRob Herring <robh@kernel.org>
Signed-off-by: default avatarLinus Walleij <linus.walleij@linaro.org>
parent a46d5e98

Documentation/devicetree/bindings/pinctrl/qcom,qcs404-pinctrl.txt

0 → 100644
+199 −0
Original line number Diff line number Diff line 
Qualcomm QCS404 TLMM block



This binding describes the Top Level Mode Multiplexer block found in the

QCS404 platform.



- compatible:

	Usage: required

	Value type: <string>

	Definition: must be "qcom,qcs404-pinctrl"



- reg:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: the base address and size of the north, south and east TLMM

		    tiles.



- reg-names:

	Usage: required

	Value type: <stringlist>

	Defintiion: names for the cells of reg, must contain "north", "south"

		    and "east".



- interrupts:

	Usage: required

	Value type: <prop-encoded-array>

	Definition: should specify the TLMM summary IRQ.



- interrupt-controller:

	Usage: required

	Value type: <none>

	Definition: identifies this node as an interrupt controller



- #interrupt-cells:

	Usage: required

	Value type: <u32>

	Definition: must be 2. Specifying the pin number and flags, as defined

		    in <dt-bindings/interrupt-controller/irq.h>



- gpio-controller:

	Usage: required

	Value type: <none>

	Definition: identifies this node as a gpio controller



- #gpio-cells:

	Usage: required

	Value type: <u32>

	Definition: must be 2. Specifying the pin number and flags, as defined

		    in <dt-bindings/gpio/gpio.h>



- gpio-ranges:

	Usage: required

	Definition:  see ../gpio/gpio.txt



Please refer to ../gpio/gpio.txt and ../interrupt-controller/interrupts.txt for

a general description of GPIO and interrupt bindings.



Please refer to pinctrl-bindings.txt in this directory for details of the

common pinctrl bindings used by client devices, including the meaning of the

phrase "pin configuration node".



The pin configuration nodes act as a container for an arbitrary number of

subnodes. Each of these subnodes represents some desired configuration for a

pin, a group, or a list of pins or groups. This configuration can include the

mux function to select on those pin(s)/group(s), and various pin configuration

parameters, such as pull-up, drive strength, etc.





PIN CONFIGURATION NODES:



The name of each subnode is not important; all subnodes should be enumerated

and processed purely based on their content.



Each subnode only affects those parameters that are explicitly listed. In

other words, a subnode that lists a mux function but no pin configuration

parameters implies no information about any pin configuration parameters.

Similarly, a pin subnode that describes a pullup parameter implies no

information about e.g. the mux function.





The following generic properties as defined in pinctrl-bindings.txt are valid

to specify in a pin configuration subnode:



- pins:

	Usage: required

	Value type: <string-array>

	Definition: List of gpio pins affected by the properties specified in

		    this subnode.



		    Valid pins are:

		      gpio0-gpio119

		        Supports mux, bias and drive-strength



		      sdc1_clk, sdc1_cmd, sdc1_data, sdc2_clk, sdc2_cmd,

		      sdc2_data

		        Supports bias and drive-strength



		      ufs_reset

		        Supports bias and drive-strength



- function:

	Usage: required

	Value type: <string>

	Definition: Specify the alternative function to be configured for the

		    specified pins. Functions are only valid for gpio pins.

		    Valid values are:



		    gpio, hdmi_tx, hdmi_ddc, blsp_uart_tx_a2, blsp_spi2, m_voc,

		    qdss_cti_trig_in_a0, blsp_uart_rx_a2, qdss_tracectl_a,

		    blsp_uart2, aud_cdc, blsp_i2c_sda_a2, qdss_tracedata_a,

		    blsp_i2c_scl_a2, qdss_tracectl_b, qdss_cti_trig_in_b0,

		    blsp_uart1, blsp_spi_mosi_a1, blsp_spi_miso_a1,

		    qdss_tracedata_b, blsp_i2c1, blsp_spi_cs_n_a1, gcc_plltest,

		    blsp_spi_clk_a1, rgb_data0, blsp_uart5, blsp_spi5,

		    adsp_ext, rgb_data1, prng_rosc, rgb_data2, blsp_i2c5,

		    gcc_gp1_clk_b, rgb_data3, gcc_gp2_clk_b, blsp_spi0,

		    blsp_uart0, gcc_gp3_clk_b, blsp_i2c0, qdss_traceclk_b,

		    pcie_clk, nfc_irq, blsp_spi4, nfc_dwl, audio_ts, rgb_data4,

		    spi_lcd, blsp_uart_tx_b2, gcc_gp3_clk_a, rgb_data5,

		    blsp_uart_rx_b2, blsp_i2c_sda_b2, blsp_i2c_scl_b2,

		    pwm_led11, i2s_3_data0_a, ebi2_lcd, i2s_3_data1_a,

		    i2s_3_data2_a, atest_char, pwm_led3, i2s_3_data3_a,

		    pwm_led4, i2s_4, ebi2_a, dsd_clk_b, pwm_led5, pwm_led6,

		    pwm_led7, pwm_led8, pwm_led24, spkr_dac0, blsp_i2c4,

		    pwm_led9, pwm_led10, spdifrx_opt, pwm_led12, pwm_led13,

		    pwm_led14, wlan1_adc1, rgb_data_b0, pwm_led15,

		    blsp_spi_mosi_b1, wlan1_adc0, rgb_data_b1, pwm_led16,

		    blsp_spi_miso_b1, qdss_cti_trig_out_b0, wlan2_adc1,

		    rgb_data_b2, pwm_led17, blsp_spi_cs_n_b1, wlan2_adc0,

		    rgb_data_b3, pwm_led18, blsp_spi_clk_b1, rgb_data_b4,

		    pwm_led19, ext_mclk1_b, qdss_traceclk_a, rgb_data_b5,

		    pwm_led20, atest_char3, i2s_3_sck_b, ldo_update, bimc_dte0,

		    rgb_hsync, pwm_led21, i2s_3_ws_b, dbg_out, rgb_vsync,

		    i2s_3_data0_b, ldo_en, hdmi_dtest, rgb_de, i2s_3_data1_b,

		    hdmi_lbk9, rgb_clk, atest_char1, i2s_3_data2_b, ebi_cdc,

		    hdmi_lbk8, rgb_mdp, atest_char0, i2s_3_data3_b, hdmi_lbk7,

		    rgb_data_b6, rgb_data_b7, hdmi_lbk6, rgmii_int, cri_trng1,

		    rgmii_wol, cri_trng0, gcc_tlmm, rgmii_ck, rgmii_tx,

		    hdmi_lbk5, hdmi_pixel, hdmi_rcv, hdmi_lbk4, rgmii_ctl,

		    ext_lpass, rgmii_rx, cri_trng, hdmi_lbk3, hdmi_lbk2,

		    qdss_cti_trig_out_b1, rgmii_mdio, hdmi_lbk1, rgmii_mdc,

		    hdmi_lbk0, ir_in, wsa_en, rgb_data6, rgb_data7,

		    atest_char2, ebi_ch0, blsp_uart3, blsp_spi3, sd_write,

		    blsp_i2c3, gcc_gp1_clk_a, qdss_cti_trig_in_b1,

		    gcc_gp2_clk_a, ext_mclk0, mclk_in1, i2s_1, dsd_clk_a,

		    qdss_cti_trig_in_a1, rgmi_dll1, pwm_led22, pwm_led23,

		    qdss_cti_trig_out_a0, rgmi_dll2, pwm_led1,

		    qdss_cti_trig_out_a1, pwm_led2, i2s_2, pll_bist,

		    ext_mclk1_a, mclk_in2, bimc_dte1, i2s_3_sck_a, i2s_3_ws_a



- bias-disable:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as no pull.



- bias-pull-down:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as pull down.



- bias-pull-up:

	Usage: optional

	Value type: <none>

	Definition: The specified pins should be configued as pull up.



- output-high:

	Usage: optional

	Value type: <none>

	Definition: The specified pins are configured in output mode, driven

		    high.

		    Not valid for sdc pins.



- output-low:

	Usage: optional

	Value type: <none>

	Definition: The specified pins are configured in output mode, driven

		    low.

		    Not valid for sdc pins.



- drive-strength:

	Usage: optional

	Value type: <u32>

	Definition: Selects the drive strength for the specified pins, in mA.

		    Valid values are: 2, 4, 6, 8, 10, 12, 14 and 16



Example:



	tlmm: pinctrl@1000000 {

		compatible = "qcom,qcs404-pinctrl";

		reg = <0x01000000 0x200000>,

		      <0x01300000 0x200000>,

		      <0x07b00000 0x200000>;

		reg-names = "south", "north", "east";

		interrupts = <GIC_SPI 208 IRQ_TYPE_LEVEL_HIGH>;

		gpio-controller;

		#gpio-cells = <2>;

		gpio-ranges = <&tlmm 0 0 120>;

		interrupt-controller;

		#interrupt-cells = <2>;

	};