Commit a3204711 authored by Greg Kroah-Hartman's avatar Greg Kroah-Hartman
Browse files

USB: io_edgeport: checkpatch cleanups 



Minor whitespace cleanups to make checkpatch happy.

Signed-off-by: default avatarGreg Kroah-Hartman <gregkh@suse.de>
parent 3bb36aa2

drivers/usb/serial/io_ionsp.h

+48 −47
Original line number Diff line number Diff line
@@ -196,7 +196,8 @@ struct int_status_pkt { 


#define MAKE_CMD_WRITE_REG(ppBuf, pLen, Port, Reg, Val)			\

do {									\

		(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1( (Port), IOSP_WRITE_UART_REG(Reg) );	\

	(*(ppBuf))[0] = IOSP_BUILD_CMD_HDR1((Port),			\

					    IOSP_WRITE_UART_REG(Reg));	\

	(*(ppBuf))[1] = (Val);						\

									\

	*ppBuf += 2;							\

drivers/usb/serial/io_ti.h

+49 −43
Original line number Diff line number Diff line
@@ -22,7 +22,7 @@ 
#define DTK_ADDR_SPACE_I2C_TYPE_II	0x82	/* Addr is placed in I2C area */

#define DTK_ADDR_SPACE_I2C_TYPE_III	0x83	/* Addr is placed in I2C area */



// UART Defines

/* UART Defines */

#define UMPMEM_BASE_UART1		0xFFA0	/* UMP UART1 base address */

#define UMPMEM_BASE_UART2		0xFFB0	/* UMP UART2 base address */

#define UMPMEM_OFFS_UART_LSR		0x05	/* UMP UART LSR register offset */
@@ -79,10 +79,10 @@ 
#define UMP_PORT_DIR_OUT			0x01

#define UMP_PORT_DIR_IN				0x02



// Address of Port 0

/* Address of Port 0 */

#define UMPM_UART1_PORT				0x03



// Commands

/* Commands */

#define	UMPC_SET_CONFIG			0x05

#define	UMPC_OPEN_PORT			0x06

#define	UMPC_CLOSE_PORT			0x07
@@ -91,32 +91,39 @@ 
#define	UMPC_TEST_PORT			0x0A

#define	UMPC_PURGE_PORT			0x0B



#define	UMPC_COMPLETE_READ		0x80	// Force the Firmware to complete the current Read

#define	UMPC_HARDWARE_RESET		0x81	// Force UMP back into BOOT Mode

#define	UMPC_COPY_DNLD_TO_I2C		0x82	// Copy current download image to type 0xf2 record in 16k I2C

						// firmware will change 0xff record to type 2 record when complete

/* Force the Firmware to complete the current Read */

#define	UMPC_COMPLETE_READ		0x80

/* Force UMP back into BOOT Mode */

#define	UMPC_HARDWARE_RESET		0x81

/*

 * Copy current download image to type 0xf2 record in 16k I2C

 * firmware will change 0xff record to type 2 record when complete

 */

#define	UMPC_COPY_DNLD_TO_I2C		0x82



	// Special function register commands

	// wIndex is register address

	// wValue is MSB/LSB mask/data

#define	UMPC_WRITE_SFR	  		0x83	// Write SFR Register

/*

 * Special function register commands

 * wIndex is register address

 * wValue is MSB/LSB mask/data

 */

#define	UMPC_WRITE_SFR			0x83	/* Write SFR Register */



	// wIndex is register address

#define	UMPC_READ_SFR	  		0x84	// Read SRF Register

/* wIndex is register address */

#define	UMPC_READ_SFR			0x84	/* Read SRF Register */



	// Set or Clear DTR (wValue bit 0 Set/Clear)		wIndex ModuleID (port)

/* Set or Clear DTR (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */

#define	UMPC_SET_CLR_DTR		0x85



	// Set or Clear RTS (wValue bit 0 Set/Clear)		wIndex ModuleID (port)

/* Set or Clear RTS (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */

#define	UMPC_SET_CLR_RTS		0x86



	// Set or Clear LOOPBACK (wValue bit 0 Set/Clear)	wIndex ModuleID (port)

/* Set or Clear LOOPBACK (wValue bit 0 Set/Clear) wIndex ModuleID (port) */

#define	UMPC_SET_CLR_LOOPBACK		0x87



	// Set or Clear BREAK (wValue bit 0 Set/Clear)		wIndex ModuleID (port)

/* Set or Clear BREAK (wValue bit 0 Set/Clear)	wIndex ModuleID (port) */

#define	UMPC_SET_CLR_BREAK		0x88



	// Read MSR wIndex ModuleID (port)

/* Read MSR wIndex ModuleID (port) */

#define	UMPC_READ_MSR			0x89



/* Toolkit commands */
@@ -130,8 +137,7 @@ 
#define UMPD_OEDB1_ADDRESS		0xFF08

#define UMPD_OEDB2_ADDRESS		0xFF10



struct out_endpoint_desc_block

{

struct out_endpoint_desc_block {

	__u8 Configuration;

	__u8 XBufAddr;

	__u8 XByteCount;
@@ -147,8 +153,8 @@ struct out_endpoint_desc_block 
 * TYPE DEFINITIONS

 * Structures for Firmware commands

 */

struct ump_uart_config		/* UART settings                    */

{

/* UART settings */

struct ump_uart_config {

	__u16 wBaudRate;	/* Baud rate                        */

	__u16 wFlags;		/* Bitmap mask of flags             */

	__u8 bDataBits;		/* 5..8 - data bits per character   */
@@ -165,8 +171,8 @@ struct ump_uart_config /* UART settings */ 
 * TYPE DEFINITIONS

 * Structures for USB interrupts

 */

struct ump_interrupt			/* Interrupt packet structure       */

{

/* Interrupt packet structure */

struct ump_interrupt {

	__u8 bICode;			/* Interrupt code (interrupt num)   */

	__u8 bIInfo;			/* Interrupt information            */

}  __attribute__((packed));

drivers/usb/serial/io_usbvend.h

+38 −49
Original line number Diff line number Diff line
@@ -301,8 +301,7 @@ 
// this is a "real" Edgeport.

//



struct edge_compatibility_bits

{

struct edge_compatibility_bits {

	// This __u32 defines which Vendor-specific commands/functionality

	// the device supports on the default EP0 pipe.
@@ -334,15 +333,13 @@ struct edge_compatibility_bits 
	__u32	TrueEdgeport		:  1;	// 0001	Set if device is a 'real' Edgeport

											// (Used only by driver, NEVER set by an EPiC device)

	__u32	GenUnused		: 31;	// Available for future expansion, must be 0



};



#define EDGE_COMPATIBILITY_MASK0	0x0001

#define EDGE_COMPATIBILITY_MASK1	0x3FFF

#define EDGE_COMPATIBILITY_MASK2	0x0001



struct edge_compatibility_descriptor

{

struct edge_compatibility_descriptor {

	__u8	Length;				// Descriptor Length (per USB spec)

	__u8	DescType;			// Descriptor Type (per USB spec, =DEVICE type)

	__u8	EpicVer;			// Version of EPiC spec supported
@@ -359,9 +356,7 @@ struct edge_compatibility_descriptor 
	// The following structure contains __u32s, with each bit

	// specifying whether the EPiC device supports the given

	// command or functionality.



	struct edge_compatibility_bits	Supports;



};



// Values for iDownloadFile
@@ -597,8 +592,7 @@ struct edge_boot_descriptor { 
#define I2C_DESC_TYPE_ION		0	// Not defined by TI





struct ti_i2c_desc

{

struct ti_i2c_desc {

	__u8	Type;			// Type of descriptor

	__u16	Size;			// Size of data only not including header

	__u8	CheckSum;		// Checksum (8 bit sum of data only)
@@ -607,16 +601,14 @@ struct ti_i2c_desc 


// for 5152 devices only (type 2 record)

// for 3410 the version is stored in the WATCHPORT_FIRMWARE_VERSION descriptor

struct ti_i2c_firmware_rec

{

struct ti_i2c_firmware_rec {

	__u8	Ver_Major;		// Firmware Major version number

	__u8	Ver_Minor;		// Firmware Minor version number

	__u8	Data[0];		// Download starts here

} __attribute__((packed));





struct watchport_firmware_version

{

struct watchport_firmware_version {

// Added 2 bytes for version number

	__u8	Version_Major;		//  Download Version (for Watchport)

	__u8	Version_Minor;
@@ -624,14 +616,12 @@ struct watchport_firmware_version 




// Structure of header of download image in fw_down.h

struct ti_i2c_image_header

{

struct ti_i2c_image_header {

	__le16	Length;

	__u8	CheckSum;

} __attribute__((packed));



struct ti_basic_descriptor

{

struct ti_basic_descriptor {

	__u8	Power;		// Self powered

				// bit 7: 1 - power switching supported

				//        0 - power switching not supported
@@ -676,8 +666,7 @@ struct ti_basic_descriptor 
#define TI_CONFIG2_WATCHPORT		0x10





struct edge_ti_manuf_descriptor

{

struct edge_ti_manuf_descriptor {

	__u8 IonConfig;		//  Config byte for ION manufacturing use

	__u8 IonConfig2;	//  Expansion

	__u8 Version;		//  Version

drivers/usb/serial/io_edgeport.h

+8 −8

File changed.

Contains only whitespace changes.