Commit a8c729e9 authored by Howard Chiu's avatar Howard Chiu Committed by Joel Stanley
Browse files

ARM: dts: aspeed: Adding Facebook Bletchley BMC 



Initial introduction of Facebook Bletchley equipped with
Aspeed 2600 BMC SoC.

Signed-off-by: default avatarHoward Chiu <howard.chiu@quantatw.com>
Link: https://lore.kernel.org/r/20211207094923.422422-1-howard.chiu@quantatw.com


Signed-off-by: default avatarJoel Stanley <joel@jms.id.au>
parent b26965e9

arch/arm/boot/dts/Makefile

+1 −0
Original line number Diff line number Diff line
@@ -1482,6 +1482,7 @@ dtb-$(CONFIG_ARCH_ASPEED) += \ 
	aspeed-bmc-arm-stardragon4800-rep2.dtb \

	aspeed-bmc-asrock-e3c246d4i.dtb \

	aspeed-bmc-bytedance-g220a.dtb \

	aspeed-bmc-facebook-bletchley.dtb \

	aspeed-bmc-facebook-cloudripper.dtb \

	aspeed-bmc-facebook-cmm.dtb \

	aspeed-bmc-facebook-elbert.dtb \

arch/arm/boot/dts/aspeed-bmc-facebook-bletchley.dts

0 → 100644
+756 −0
Original line number Diff line number Diff line 
// SPDX-License-Identifier: GPL-2.0+

// Copyright (c) 2021 Facebook Inc.

/dts-v1/;



#include "aspeed-g6.dtsi"

#include <dt-bindings/gpio/aspeed-gpio.h>

#include <dt-bindings/usb/pd.h>



/ {

	model = "Facebook Bletchley BMC";

	compatible = "facebook,bletchley-bmc", "aspeed,ast2600";



	aliases {

		serial4 = &uart5;

	};



	chosen {

		bootargs = "console=ttyS4,57600n8";

	};



	memory@80000000 {

		device_type = "memory";

		reg = <0x80000000 0x80000000>;

	};



	iio-hwmon {

		compatible = "iio-hwmon";

		io-channels = <&adc0 0>, <&adc0 1>, <&adc0 2>, <&adc0 3>,

			<&adc0 4>, <&adc0 5>, <&adc0 6>, <&adc0 7>,

			<&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>,

			<&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>;

	};



	spi_gpio: spi-gpio {

		compatible = "spi-gpio";

		#address-cells = <1>;

		#size-cells = <0>;



		gpio-sck = <&gpio0 ASPEED_GPIO(Z, 3) GPIO_ACTIVE_HIGH>;

		gpio-mosi = <&gpio0 ASPEED_GPIO(Z, 4) GPIO_ACTIVE_HIGH>;

		gpio-miso = <&gpio0 ASPEED_GPIO(Z, 5) GPIO_ACTIVE_HIGH>;

		num-chipselects = <1>;

		cs-gpios = <&gpio0 ASPEED_GPIO(Z, 0) GPIO_ACTIVE_LOW>;



		tpmdev@0 {

			compatible = "tcg,tpm_tis-spi";

			spi-max-frequency = <33000000>;

			reg = <0>;

		};

	};



	switchphy: ethernet-phy@0 {

		// Fixed link

	};



	leds {

		compatible = "gpio-leds";



		sys_log_id {

			retain-state-shutdown;

			default-state = "keep";

			gpios = <&front_leds 0 GPIO_ACTIVE_HIGH>;

		};

		fan0_blue {

			retain-state-shutdown;

			default-state = "on";

			gpios = <&fan_ioexp 8 GPIO_ACTIVE_HIGH>;

		};

		fan1_blue {

			retain-state-shutdown;

			default-state = "on";

			gpios = <&fan_ioexp 9 GPIO_ACTIVE_HIGH>;

		};

		fan2_blue {

			retain-state-shutdown;

			default-state = "on";

			gpios = <&fan_ioexp 10 GPIO_ACTIVE_HIGH>;

		};

		fan3_blue {

			retain-state-shutdown;

			default-state = "on";

			gpios = <&fan_ioexp 11 GPIO_ACTIVE_HIGH>;

		};

		fan0_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&fan_ioexp 12 GPIO_ACTIVE_HIGH>;

		};

		fan1_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&fan_ioexp 13 GPIO_ACTIVE_HIGH>;

		};

		fan2_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&fan_ioexp 14 GPIO_ACTIVE_HIGH>;

		};

		fan3_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&fan_ioexp 15 GPIO_ACTIVE_HIGH>;

		};

		sled0_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled0_leds 0 GPIO_ACTIVE_LOW>;

		};

		sled0_blue {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled0_leds 1 GPIO_ACTIVE_LOW>;

		};

		sled1_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled1_leds 0 GPIO_ACTIVE_LOW>;

		};

		sled1_blue {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled1_leds 1 GPIO_ACTIVE_LOW>;

		};

		sled2_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled2_leds 0 GPIO_ACTIVE_LOW>;

		};

		sled2_blue {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled2_leds 1 GPIO_ACTIVE_LOW>;

		};

		sled3_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled3_leds 0 GPIO_ACTIVE_LOW>;

		};

		sled3_blue {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled3_leds 1 GPIO_ACTIVE_LOW>;

		};

		sled4_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled4_leds 0 GPIO_ACTIVE_LOW>;

		};

		sled4_blue {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled4_leds 1 GPIO_ACTIVE_LOW>;

		};

		sled5_amber {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled5_leds 0 GPIO_ACTIVE_LOW>;

		};

		sled5_blue {

			retain-state-shutdown;

			default-state = "off";

			gpios = <&sled5_leds 1 GPIO_ACTIVE_LOW>;

		};

	};

};



&mac2 {

	status = "okay";

	phy-mode = "rgmii";

	phy-handle = <&switchphy>;

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_rgmii3_default>;



	fixed-link {

		speed = <1000>;

		full-duplex;

	};

};



&rtc {

	status = "okay";

};



&fmc {

	status = "okay";

	flash@0 {

		status = "okay";

		m25p,fast-read;

		label = "bmc";

		spi-max-frequency = <50000000>;

#include "openbmc-flash-layout-128.dtsi"

	};

};



&spi2 {

	status = "okay";

	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_spi2_default>;



	flash@0 {

		status = "okay";

		m25p,fast-read;

		label = "pnor";

		spi-max-frequency = <100000000>;

	};

};



&i2c0 {

	status = "okay";

	/* TODO: Add ADC INA230 */



	mp5023@40 {

		compatible = "mps,mp5023";

		reg = <0x40>;

	};



	tmp421@4f {

		compatible = "ti,tmp421";

		reg = <0x4f>;

	};



	sled0_ioexp: pca9539@76 {

		compatible = "nxp,pca9539";

		reg = <0x76>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"SLED0_MS_DETECT1","SLED0_VBUS_BMC_EN","SLED0_INA230_ALERT","SLED0_P12V_STBY_ALERT",

		"SLED0_SSD_ALERT","SLED0_MS_DETECT0","SLED0_RST_CCG5","SLED0_FUSB302_INT",

		"SLED0_MD_STBY_RESET","SLED0_MD_IOEXP_EN_FAULT","SLED0_MD_DIR","SLED0_MD_DECAY",

		"SLED0_MD_MODE1","SLED0_MD_MODE2","SLED0_MD_MODE3","power-host0";

	};



	sled0_leds: pca9552@67 {

		compatible = "nxp,pca9552";

		reg = <0x67>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"led-sled0-amber","led-sled0-blue","SLED0_RST_IOEXP","",

		"","","","",

		"","","","",

		"","","","";

	};



	sled0_fusb302: typec-portc@22 {

		compatible = "fcs,fusb302";

		reg = <0x22>;



		connector {

			compatible = "usb-c-connector";

			label = "USB-C";

			power-role = "dual";

			try-power-role = "sink";

			data-role = "dual";

			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)

					PDO_VAR(3000, 12000, 3000)

					PDO_PPS_APDO(3000, 11000, 3000)>;

			op-sink-microwatt = <10000000>;

		};

	};

};



&i2c1 {

	status = "okay";

	/* TODO: Add ADC INA230 */



	mp5023@40 {

		compatible = "mps,mp5023";

		reg = <0x40>;

	};



	tmp421@4f {

		compatible = "ti,tmp421";

		reg = <0x4f>;

	};



	sled1_ioexp: pca9539@76 {

		compatible = "nxp,pca9539";

		reg = <0x76>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"SLED1_MS_DETECT1","SLED1_VBUS_BMC_EN","SLED1_INA230_ALERT","SLED1_P12V_STBY_ALERT",

		"SLED1_SSD_ALERT","SLED1_MS_DETECT0","SLED1_RST_CCG5","SLED1_FUSB302_INT",

		"SLED1_MD_STBY_RESET","SLED1_MD_IOEXP_EN_FAULT","SLED1_MD_DIR","SLED1_MD_DECAY",

		"SLED1_MD_MODE1","SLED1_MD_MODE2","SLED1_MD_MODE3","power-host1";

	};



	sled1_leds: pca9552@67 {

		compatible = "nxp,pca9552";

		reg = <0x67>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"led-sled1-amber","led-sled1-blue","SLED1_RST_IOEXP","",

		"","","","",

		"","","","",

		"","","","";

	};



	sled1_fusb302: typec-portc@22 {

		compatible = "fcs,fusb302";

		reg = <0x22>;



		connector {

			compatible = "usb-c-connector";

			label = "USB-C";

			power-role = "dual";

			try-power-role = "sink";

			data-role = "dual";

			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)

					PDO_VAR(3000, 12000, 3000)

					PDO_PPS_APDO(3000, 11000, 3000)>;

			op-sink-microwatt = <10000000>;

		};

	};

};



&i2c1 {

	status = "okay";

};



&i2c2 {

	status = "okay";

	/* TODO: Add ADC INA230 */



	mp5023@40 {

		compatible = "mps,mp5023";

		reg = <0x40>;

	};



	tmp421@4f {

		compatible = "ti,tmp421";

		reg = <0x4f>;

	};



	sled2_ioexp: pca9539@76 {

		compatible = "nxp,pca9539";

		reg = <0x76>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"SLED2_MS_DETECT1","SLED2_VBUS_BMC_EN","SLED2_INA230_ALERT","SLED2_P12V_STBY_ALERT",

		"SLED2_SSD_ALERT","SLED2_MS_DETECT0","SLED2_RST_CCG5","SLED2_FUSB302_INT",

		"SLED2_MD_STBY_RESET","SLED2_MD_IOEXP_EN_FAULT","SLED2_MD_DIR","SLED2_MD_DECAY",

		"SLED2_MD_MODE1","SLED2_MD_MODE2","SLED2_MD_MODE3","power-host2";

	};



	sled2_leds: pca9552@67 {

		compatible = "nxp,pca9552";

		reg = <0x67>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"led-sled2-amber","led-sled2-blue","SLED2_RST_IOEXP","",

		"","","","",

		"","","","",

		"","","","";

	};



	sled2_fusb302: typec-portc@22 {

		compatible = "fcs,fusb302";

		reg = <0x22>;



		connector {

			compatible = "usb-c-connector";

			label = "USB-C";

			power-role = "dual";

			try-power-role = "sink";

			data-role = "dual";

			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)

					PDO_VAR(3000, 12000, 3000)

					PDO_PPS_APDO(3000, 11000, 3000)>;

			op-sink-microwatt = <10000000>;

		};

	};

};



&i2c3 {

	status = "okay";

	/* TODO: Add ADC INA230 */



	mp5023@40 {

		compatible = "mps,mp5023";

		reg = <0x40>;

	};



	tmp421@4f {

		compatible = "ti,tmp421";

		reg = <0x4f>;

	};



	sled3_ioexp: pca9539@76 {

		compatible = "nxp,pca9539";

		reg = <0x76>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"SLED3_MS_DETECT1","SLED3_VBUS_BMC_EN","SLED3_INA230_ALERT","SLED3_P12V_STBY_ALERT",

		"SLED3_SSD_ALERT","SLED3_MS_DETECT0","SLED3_RST_CCG5","SLED3_FUSB302_INT",

		"SLED3_MD_STBY_RESET","SLED3_MD_IOEXP_EN_FAULT","SLED3_MD_DIR","SLED3_MD_DECAY",

		"SLED3_MD_MODE1","SLED3_MD_MODE2","SLED3_MD_MODE3","power-host3";

	};



	sled3_leds: pca9552@67 {

		compatible = "nxp,pca9552";

		reg = <0x67>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"led-sled3-amber","led-sled3-blue","SLED3_RST_IOEXP","",

		"","","","",

		"","","","",

		"","","","";

	};



	sled3_fusb302: typec-portc@22 {

		compatible = "fcs,fusb302";

		reg = <0x22>;



		connector {

			compatible = "usb-c-connector";

			label = "USB-C";

			power-role = "dual";

			try-power-role = "sink";

			data-role = "dual";

			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)

					PDO_VAR(3000, 12000, 3000)

					PDO_PPS_APDO(3000, 11000, 3000)>;

			op-sink-microwatt = <10000000>;

		};

	};

};



&i2c4 {

	status = "okay";

	/* TODO: Add ADC INA230 */



	mp5023@40 {

		compatible = "mps,mp5023";

		reg = <0x40>;

	};



	tmp421@4f {

		compatible = "ti,tmp421";

		reg = <0x4f>;

	};



	sled4_ioexp: pca9539@76 {

		compatible = "nxp,pca9539";

		reg = <0x76>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"SLED4_MS_DETECT1","SLED4_VBUS_BMC_EN","SLED4_INA230_ALERT","SLED4_P12V_STBY_ALERT",

		"SLED4_SSD_ALERT","SLED4_MS_DETECT0","SLED4_RST_CCG5","SLED4_FUSB302_INT",

		"SLED4_MD_STBY_RESET","SLED4_MD_IOEXP_EN_FAULT","SLED4_MD_DIR","SLED4_MD_DECAY",

		"SLED4_MD_MODE1","SLED4_MD_MODE2","SLED4_MD_MODE3","power-host4";

	};



	sled4_leds: pca9552@67 {

		compatible = "nxp,pca9552";

		reg = <0x67>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"led-sled4-amber","led-sled4-blue","SLED4_RST_IOEXP","",

		"","","","",

		"","","","",

		"","","","";

	};



	sled4_fusb302: typec-portc@22 {

		compatible = "fcs,fusb302";

		reg = <0x22>;



		connector {

			compatible = "usb-c-connector";

			label = "USB-C";

			power-role = "dual";

			try-power-role = "sink";

			data-role = "dual";

			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)

					PDO_VAR(3000, 12000, 3000)

					PDO_PPS_APDO(3000, 11000, 3000)>;

			op-sink-microwatt = <10000000>;

		};

	};

};



&i2c5 {

	status = "okay";

	/* TODO: Add ADC INA230 */



	mp5023@40 {

		compatible = "mps,mp5023";

		reg = <0x40>;

	};



	tmp421@4f {

		compatible = "ti,tmp421";

		reg = <0x4f>;

	};



	sled5_ioexp: pca9539@76 {

		compatible = "nxp,pca9539";

		reg = <0x76>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"SLED5_MS_DETECT1","SLED5_VBUS_BMC_EN","SLED5_INA230_ALERT","SLED5_P12V_STBY_ALERT",

		"SLED5_SSD_ALERT","SLED5_MS_DETECT0","SLED5_RST_CCG5","SLED5_FUSB302_INT",

		"SLED5_MD_STBY_RESET","SLED5_MD_IOEXP_EN_FAULT","SLED5_MD_DIR","SLED5_MD_DECAY",

		"SLED5_MD_MODE1","SLED5_MD_MODE2","SLED5_MD_MODE3","power-host5";

	};



	sled5_leds: pca9552@67 {

		compatible = "nxp,pca9552";

		reg = <0x67>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"led-sled5-amber","led-sled5-blue","SLED5_RST_IOEXP","",

		"","","","",

		"","","","",

		"","","","";

	};



	sled5_fusb302: typec-portc@22 {

		compatible = "fcs,fusb302";

		reg = <0x22>;



		connector {

			compatible = "usb-c-connector";

			label = "USB-C";

			power-role = "dual";

			try-power-role = "sink";

			data-role = "dual";

			source-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)>;

			sink-pdos = <PDO_FIXED(5000, 3000, PDO_FIXED_USB_COMM)

					PDO_VAR(3000, 12000, 3000)

					PDO_PPS_APDO(3000, 11000, 3000)>;

			op-sink-microwatt = <10000000>;

		};

	};

};



&i2c6 {

	status = "okay";



	eeprom@56 {

		compatible = "atmel,24c64";

		reg = <0x56>;

	};



	rtc@51 {

		compatible = "nxp,pcf85263";

		reg = <0x51>;

	};

};



&i2c7 {

	status = "okay";



	eeprom@54 {

		compatible = "atmel,24c64";

		reg = <0x54>;

	};

};



&i2c9 {

	status = "okay";



	tmp421@4f {

		compatible = "ti,tmp421";

		reg = <0x4f>;

	};

};



&i2c10 {

	status = "okay";



	tmp421@4f {

		compatible = "ti,tmp421";

		reg = <0x4f>;

	};



	hdc1080@40 {

		compatible = "ti,hdc1080";

		reg = <0x40>;

	};



	front_leds: pca9552@67 {

		compatible = "nxp,pca9552";

		reg = <0x67>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"led-fault-identify","power-p5v-stby-good",

		"power-p1v0-dvdd-good","power-p1v0-avdd-good",

		"","","","",

		"","","","",

		"","","","";

	};

};



&i2c12 {

	status = "okay";



	adm1278@11 {

		compatible = "adi,adm1278";

		reg = <0x11>;

	};



	tmp421@4c {

		compatible = "ti,tmp421";

		reg = <0x4c>;

	};



	tmp421@4d {

		compatible = "ti,tmp421";

		reg = <0x4d>;

	};



	fan_ioexp: pca9552@67 {

		compatible = "nxp,pca9552";

		reg = <0x67>;

		#address-cells = <1>;

		#size-cells = <0>;

		gpio-controller;

		#gpio-cells = <2>;



		gpio-line-names =

		"presence-fan0","presence-fan1",

		"presence-fan2","presence-fan3",

		"power-fan0-good","power-fan1-good",

		"power-fan2-good","power-fan3-good",

		"","","","",

		"","","","";

	};

};



&i2c13 {

	multi-master;

	aspeed,hw-timeout-ms = <1000>;

	status = "okay";

};



&gpio0 {

	gpio-line-names =

	/*A0-A7*/	"","","","","","","","",

	/*B0-B7*/	"","","SEL_SPI2_MUX","SPI2_MUX1",

			"SPI2_MUX2","SPI2_MUX3","","",

	/*C0-C7*/	"","","","","","","","",

	/*D0-D7*/	"","","","","","","","",

	/*E0-E7*/	"","","","","","","","",

	/*F0-F7*/	"","","","","","","","",

	/*G0-G7*/	"","SWITCH_FRU_MUX","","","","","","",

	/*H0-H7*/	"presence-riser1","presence-riser2",

			"presence-sled0","presence-sled1",

			"presence-sled2","presence-sled3",

			"presence-sled4","presence-sled5",

	/*I0-I7*/	"REV_ID0","","REV_ID1","REV_ID2",

			"","","","",

	/*J0-J7*/	"","","","","","","","",

	/*K0-K7*/	"","","","","","","","",

	/*L0-L7*/	"","","","","","","","",

	/*M0-M7*/	"ALERT_SLED0","ALERT_SLED1",

			"ALERT_SLED2","ALERT_SLED3",

			"ALERT_SLED4","ALERT_SLED5",

			"P12V_AUX_ALERT1","",

	/*N0-N7*/	"","","","","","","","",

	/*O0-O7*/	"","","","",

			"","BOARD_ID0","BOARD_ID1","BOARD_ID2",

	/*P0-P7*/	"","","","","","","","",

	/*Q0-Q7*/	"","","","","","","","",

	/*R0-R7*/	"","","","","","","","",

	/*S0-S7*/	"","","","BAT_DETECT",

			"BMC_BT_WP0","BMC_BT_WP1","","",

	/*T0-T7*/	"","","","","","","","",

	/*U0-U7*/	"","","","","","","","",

	/*V0-V7*/	"","RST_BMC_MVL","","",

			"USB2_SEL0_A","USB2_SEL1_A",

			"USB2_SEL0_B","USB2_SEL1_B",

	/*W0-W7*/	"RST_FRONT_IOEXP","","","","","","","",

	/*X0-X7*/	"","","","","","","","",

	/*Y0-Y7*/	"","","BSM_FLASH_LATCH","","","","","",

	/*Z0-Z7*/	"","","","","","","","";

};



&adc0 {

	vref = <1800>;

	status = "okay";



	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_adc0_default &pinctrl_adc1_default

		&pinctrl_adc2_default &pinctrl_adc3_default

		&pinctrl_adc4_default &pinctrl_adc5_default

		&pinctrl_adc6_default &pinctrl_adc7_default>;

};



&adc1 {

	vref = <2500>;

	status = "okay";



	pinctrl-names = "default";

	pinctrl-0 = <&pinctrl_adc8_default &pinctrl_adc9_default

		&pinctrl_adc10_default &pinctrl_adc11_default

		&pinctrl_adc12_default &pinctrl_adc13_default

		&pinctrl_adc14_default &pinctrl_adc15_default>;

};