ASoC: convert Microchip I2SMCC binding to yaml

# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)

%YAML 1.2

---

$id: http://devicetree.org/schemas/sound/mchp,i2s-mcc.yaml#

$schema: http://devicetree.org/meta-schemas/core.yaml#

title: Microchip I2S Multi-Channel Controller

maintainers:

  - Codrin Ciubotariu <codrin.ciubotariu@microchip.com>

description:

  The I2SMCC complies with the Inter-IC Sound (I2S) bus specification and

  supports a Time Division Multiplexed (TDM) interface with external

  multi-channel audio codecs. It consists of a receiver, a transmitter and a

  common clock generator that can be enabled separately to provide Adapter,

  Client or Controller modes with receiver and/or transmitter active.

  On later I2SMCC versions (starting with Microchip's SAMA7G5) I2S

  multi-channel is supported by using multiple data pins, output and

  input, without TDM.

properties:

  "#sound-dai-cells":

    const: 0

  compatible:

    enum:

      - microchip,sam9x60-i2smcc

      - microchip,sama7g5-i2smcc

  reg:

    maxItems: 1

  interrupts:

    maxItems: 1

  clocks:

    items:

      - description: Peripheral Bus Clock

      - description: Generic Clock (Optional). Should be set mostly when Master

          Mode is required.

    minItems: 1

  clock-names:

    items:

      - const: pclk

      - const: gclk

    minItems: 1

  dmas:

    items:

      - description: TX DMA Channel

      - description: RX DMA Channel

  dma-names:

    items:

      - const: tx

      - const: rx

  microchip,tdm-data-pair:

    description:

      Represents the DIN/DOUT pair pins that are used to receive/send

      TDM data. It is optional and it is only needed if the controller

      uses the TDM mode.

    $ref: /schemas/types.yaml#/definitions/uint8

    enum: [0, 1, 2, 3]

    default: 0

if:

  properties:

    compatible:

      const: microchip,sam9x60-i2smcc

then:

  properties:

    microchip,tdm-data-pair: false

required:

  - "#sound-dai-cells"

  - compatible

  - reg

  - interrupts

  - clocks

  - clock-names

  - dmas

  - dma-names

additionalProperties: false

examples:

  - |

    #include <dt-bindings/dma/at91.h>

    #include <dt-bindings/interrupt-controller/arm-gic.h>

    i2s@f001c000 {

        #sound-dai-cells = <0>;

        compatible = "microchip,sam9x60-i2smcc";

        reg = <0xf001c000 0x100>;

        interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;

        dmas = <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |

                       AT91_XDMAC_DT_PERID(36))>,

               <&dma0 (AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |

                       AT91_XDMAC_DT_PERID(37))>;

        dma-names = "tx", "rx";

        clocks = <&i2s_clk>, <&i2s_gclk>;

        clock-names = "pclk", "gclk";

        pinctrl-names = "default";

        pinctrl-0 = <&pinctrl_i2s_default>;

    };

* Microchip I2S Multi-Channel Controller

Required properties:

- compatible:     Should be "microchip,sam9x60-i2smcc" or

		  "microchip,sama7g5-i2smcc".

- reg:            Should be the physical base address of the controller and the

                  length of memory mapped region.

- interrupts:     Should contain the interrupt for the controller.

- dmas:           Should be one per channel name listed in the dma-names property,

                  as described in atmel-dma.txt and dma.txt files.

- dma-names:      Identifier string for each DMA request line in the dmas property.

		  Two dmas have to be defined, "tx" and "rx".

- clocks:         Must contain an entry for each entry in clock-names.

                  Please refer to clock-bindings.txt.

- clock-names:    Should be one of each entry matching the clocks phandles list:

                  - "pclk" (peripheral clock) Required.

                  - "gclk" (generated clock) Optional (1).

Optional properties:

- pinctrl-0:      Should specify pin control groups used for this controller.

- princtrl-names: Should contain only one value - "default".

- microchip,tdm-data-pair: 8 bit value that represents the DIN/DOUT pair pins

			   which are used to receive/send TDM data. It is optional

			   and it is only needed if the controller uses the TDM

			   mode. Not available for "microchip,sam9x60-i2smcc"

			   compatible. If it's not present, the default value is 0,

			   so the DIN/DOUT 0 pins are used.

(1) : Only the peripheral clock is required. The generated clock is optional

      and should be set mostly when Master Mode is required.

Example:

	i2s@f001c000 {

		compatible = "microchip,sam9x60-i2smcc";

		reg = <0xf001c000 0x100>;

		interrupts = <34 IRQ_TYPE_LEVEL_HIGH 7>;

		dmas = <&dma0

			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |

			 AT91_XDMAC_DT_PERID(36))>,

		       <&dma0

			(AT91_XDMAC_DT_MEM_IF(0) | AT91_XDMAC_DT_PER_IF(1) |

			 AT91_XDMAC_DT_PERID(37))>;

		dma-names = "tx", "rx";

		clocks = <&i2s_clk>, <&i2s_gclk>;

		clock-names = "pclk", "gclk";

		pinctrl-names = "default";

		pinctrl-0 = <&pinctrl_i2s_default>;

	};