Loading Documentation/acpi/enumeration.txt +0 −6 Original line number Original line Diff line number Diff line Loading @@ -60,12 +60,6 @@ If the driver needs to perform more complex initialization like getting and configuring GPIOs it can get its ACPI handle and extract this information configuring GPIOs it can get its ACPI handle and extract this information from ACPI tables. from ACPI tables. Currently the kernel is not able to automatically determine from which ACPI device it should make the corresponding platform device so we need to add the ACPI device explicitly to acpi_platform_device_ids list defined in drivers/acpi/acpi_platform.c. This limitation is only for the platform devices, SPI and I2C devices are created automatically as described below. DMA support DMA support ~~~~~~~~~~~ ~~~~~~~~~~~ DMA controllers enumerated via ACPI should be registered in the system to DMA controllers enumerated via ACPI should be registered in the system to Loading Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +4 −2 Original line number Original line Diff line number Diff line Loading @@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined under node /cpus/cpu@0. under node /cpus/cpu@0. Required properties: Required properties: - operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt - None for details Optional properties: Optional properties: - operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for details. OPPs *must* be supplied either via DT, i.e. this property, or populated at runtime. - clock-latency: Specify the possible maximum transition latency for clock, - clock-latency: Specify the possible maximum transition latency for clock, in unit of nanoseconds. in unit of nanoseconds. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. Loading Documentation/input/event-codes.txt +13 −0 Original line number Original line Diff line number Diff line Loading @@ -281,6 +281,19 @@ gestures can normally be extracted from it. If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT device. device. INPUT_PROP_TOPBUTTONPAD: ----------------------- Some laptops, most notably the Lenovo *40 series provide a trackstick device but do not have physical buttons associated with the trackstick device. Instead, the top area of the touchpad is marked to show visual/haptic areas for left, middle, right buttons intended to be used with the trackstick. If INPUT_PROP_TOPBUTTONPAD is set, userspace should emulate buttons accordingly. This property does not affect kernel behavior. The kernel does not provide button emulation for such devices but treats them as any other INPUT_PROP_BUTTONPAD device. Guidelines: Guidelines: ========== ========== The guidelines below ensure proper single-touch and multi-finger functionality. The guidelines below ensure proper single-touch and multi-finger functionality. Loading Documentation/kernel-parameters.txt +7 −1 Original line number Original line Diff line number Diff line Loading @@ -2790,6 +2790,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. leaf rcu_node structure. Useful for very large leaf rcu_node structure. Useful for very large systems. systems. rcutree.jiffies_till_sched_qs= [KNL] Set required age in jiffies for a given grace period before RCU starts soliciting quiescent-state help from rcu_note_context_switch(). rcutree.jiffies_till_first_fqs= [KNL] rcutree.jiffies_till_first_fqs= [KNL] Set delay from grace-period initialization to Set delay from grace-period initialization to first attempt to force quiescent states. first attempt to force quiescent states. Loading Loading @@ -3526,7 +3532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. the allocated input device; If set to 0, video driver the allocated input device; If set to 0, video driver will only send out the event without touching backlight will only send out the event without touching backlight brightness level. brightness level. default: 0 default: 1 virtio_mmio.device= virtio_mmio.device= [VMMIO] Memory mapped virtio (platform) device. [VMMIO] Memory mapped virtio (platform) device. Loading MAINTAINERS +17 −3 Original line number Original line Diff line number Diff line Loading @@ -156,7 +156,6 @@ F: drivers/net/hamradio/6pack.c 8169 10/100/1000 GIGABIT ETHERNET DRIVER 8169 10/100/1000 GIGABIT ETHERNET DRIVER M: Realtek linux nic maintainers <nic_swsd@realtek.com> M: Realtek linux nic maintainers <nic_swsd@realtek.com> M: Francois Romieu <romieu@fr.zoreil.com> L: netdev@vger.kernel.org L: netdev@vger.kernel.org S: Maintained S: Maintained F: drivers/net/ethernet/realtek/r8169.c F: drivers/net/ethernet/realtek/r8169.c Loading Loading @@ -4511,8 +4510,7 @@ S: Supported F: drivers/idle/i7300_idle.c F: drivers/idle/i7300_idle.c IEEE 802.15.4 SUBSYSTEM IEEE 802.15.4 SUBSYSTEM M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> M: Alexander Aring <alex.aring@gmail.com> M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://apps.sourceforge.net/trac/linux-zigbee W: http://apps.sourceforge.net/trac/linux-zigbee T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git Loading Loading @@ -6958,6 +6956,12 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained S: Maintained F: drivers/pinctrl/pinctrl-at91.c F: drivers/pinctrl/pinctrl-at91.c PIN CONTROLLER - RENESAS M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> L: linux-sh@vger.kernel.org S: Maintained F: drivers/pinctrl/sh-pfc/ PIN CONTROLLER - SAMSUNG PIN CONTROLLER - SAMSUNG M: Tomasz Figa <t.figa@samsung.com> M: Tomasz Figa <t.figa@samsung.com> M: Thomas Abraham <thomas.abraham@linaro.org> M: Thomas Abraham <thomas.abraham@linaro.org> Loading Loading @@ -8021,6 +8025,16 @@ F: drivers/ata/ F: include/linux/ata.h F: include/linux/ata.h F: include/linux/libata.h F: include/linux/libata.h SERIAL ATA AHCI PLATFORM devices support M: Hans de Goede <hdegoede@redhat.com> M: Tejun Heo <tj@kernel.org> L: linux-ide@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git S: Supported F: drivers/ata/ahci_platform.c F: drivers/ata/libahci_platform.c F: include/linux/ahci_platform.h SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> L: linux-scsi@vger.kernel.org L: linux-scsi@vger.kernel.org Loading Loading
Documentation/acpi/enumeration.txt +0 −6 Original line number Original line Diff line number Diff line Loading @@ -60,12 +60,6 @@ If the driver needs to perform more complex initialization like getting and configuring GPIOs it can get its ACPI handle and extract this information configuring GPIOs it can get its ACPI handle and extract this information from ACPI tables. from ACPI tables. Currently the kernel is not able to automatically determine from which ACPI device it should make the corresponding platform device so we need to add the ACPI device explicitly to acpi_platform_device_ids list defined in drivers/acpi/acpi_platform.c. This limitation is only for the platform devices, SPI and I2C devices are created automatically as described below. DMA support DMA support ~~~~~~~~~~~ ~~~~~~~~~~~ DMA controllers enumerated via ACPI should be registered in the system to DMA controllers enumerated via ACPI should be registered in the system to Loading
Documentation/devicetree/bindings/cpufreq/cpufreq-cpu0.txt +4 −2 Original line number Original line Diff line number Diff line Loading @@ -8,10 +8,12 @@ Both required and optional properties listed below must be defined under node /cpus/cpu@0. under node /cpus/cpu@0. Required properties: Required properties: - operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt - None for details Optional properties: Optional properties: - operating-points: Refer to Documentation/devicetree/bindings/power/opp.txt for details. OPPs *must* be supplied either via DT, i.e. this property, or populated at runtime. - clock-latency: Specify the possible maximum transition latency for clock, - clock-latency: Specify the possible maximum transition latency for clock, in unit of nanoseconds. in unit of nanoseconds. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. - voltage-tolerance: Specify the CPU voltage tolerance in percentage. Loading
Documentation/input/event-codes.txt +13 −0 Original line number Original line Diff line number Diff line Loading @@ -281,6 +281,19 @@ gestures can normally be extracted from it. If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT If INPUT_PROP_SEMI_MT is not set, the device is assumed to be a true MT device. device. INPUT_PROP_TOPBUTTONPAD: ----------------------- Some laptops, most notably the Lenovo *40 series provide a trackstick device but do not have physical buttons associated with the trackstick device. Instead, the top area of the touchpad is marked to show visual/haptic areas for left, middle, right buttons intended to be used with the trackstick. If INPUT_PROP_TOPBUTTONPAD is set, userspace should emulate buttons accordingly. This property does not affect kernel behavior. The kernel does not provide button emulation for such devices but treats them as any other INPUT_PROP_BUTTONPAD device. Guidelines: Guidelines: ========== ========== The guidelines below ensure proper single-touch and multi-finger functionality. The guidelines below ensure proper single-touch and multi-finger functionality. Loading
Documentation/kernel-parameters.txt +7 −1 Original line number Original line Diff line number Diff line Loading @@ -2790,6 +2790,12 @@ bytes respectively. Such letter suffixes can also be entirely omitted. leaf rcu_node structure. Useful for very large leaf rcu_node structure. Useful for very large systems. systems. rcutree.jiffies_till_sched_qs= [KNL] Set required age in jiffies for a given grace period before RCU starts soliciting quiescent-state help from rcu_note_context_switch(). rcutree.jiffies_till_first_fqs= [KNL] rcutree.jiffies_till_first_fqs= [KNL] Set delay from grace-period initialization to Set delay from grace-period initialization to first attempt to force quiescent states. first attempt to force quiescent states. Loading Loading @@ -3526,7 +3532,7 @@ bytes respectively. Such letter suffixes can also be entirely omitted. the allocated input device; If set to 0, video driver the allocated input device; If set to 0, video driver will only send out the event without touching backlight will only send out the event without touching backlight brightness level. brightness level. default: 0 default: 1 virtio_mmio.device= virtio_mmio.device= [VMMIO] Memory mapped virtio (platform) device. [VMMIO] Memory mapped virtio (platform) device. Loading
MAINTAINERS +17 −3 Original line number Original line Diff line number Diff line Loading @@ -156,7 +156,6 @@ F: drivers/net/hamradio/6pack.c 8169 10/100/1000 GIGABIT ETHERNET DRIVER 8169 10/100/1000 GIGABIT ETHERNET DRIVER M: Realtek linux nic maintainers <nic_swsd@realtek.com> M: Realtek linux nic maintainers <nic_swsd@realtek.com> M: Francois Romieu <romieu@fr.zoreil.com> L: netdev@vger.kernel.org L: netdev@vger.kernel.org S: Maintained S: Maintained F: drivers/net/ethernet/realtek/r8169.c F: drivers/net/ethernet/realtek/r8169.c Loading Loading @@ -4511,8 +4510,7 @@ S: Supported F: drivers/idle/i7300_idle.c F: drivers/idle/i7300_idle.c IEEE 802.15.4 SUBSYSTEM IEEE 802.15.4 SUBSYSTEM M: Alexander Smirnov <alex.bluesman.smirnov@gmail.com> M: Alexander Aring <alex.aring@gmail.com> M: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) L: linux-zigbee-devel@lists.sourceforge.net (moderated for non-subscribers) W: http://apps.sourceforge.net/trac/linux-zigbee W: http://apps.sourceforge.net/trac/linux-zigbee T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git T: git git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan.git Loading Loading @@ -6958,6 +6956,12 @@ L: linux-arm-kernel@lists.infradead.org (moderated for non-subscribers) S: Maintained S: Maintained F: drivers/pinctrl/pinctrl-at91.c F: drivers/pinctrl/pinctrl-at91.c PIN CONTROLLER - RENESAS M: Laurent Pinchart <laurent.pinchart@ideasonboard.com> L: linux-sh@vger.kernel.org S: Maintained F: drivers/pinctrl/sh-pfc/ PIN CONTROLLER - SAMSUNG PIN CONTROLLER - SAMSUNG M: Tomasz Figa <t.figa@samsung.com> M: Tomasz Figa <t.figa@samsung.com> M: Thomas Abraham <thomas.abraham@linaro.org> M: Thomas Abraham <thomas.abraham@linaro.org> Loading Loading @@ -8021,6 +8025,16 @@ F: drivers/ata/ F: include/linux/ata.h F: include/linux/ata.h F: include/linux/libata.h F: include/linux/libata.h SERIAL ATA AHCI PLATFORM devices support M: Hans de Goede <hdegoede@redhat.com> M: Tejun Heo <tj@kernel.org> L: linux-ide@vger.kernel.org T: git git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata.git S: Supported F: drivers/ata/ahci_platform.c F: drivers/ata/libahci_platform.c F: include/linux/ahci_platform.h SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER SERVER ENGINES 10Gbps iSCSI - BladeEngine 2 DRIVER M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> M: Jayamohan Kallickal <jayamohan.kallickal@emulex.com> L: linux-scsi@vger.kernel.org L: linux-scsi@vger.kernel.org Loading
Ingo Molnar <mingo@kernel.org>Ingo Molnar <mingo@kernel.org>