Newer
Older
Greg Kroah-Hartman
committed
/* SPDX-License-Identifier: GPL-2.0 */
/*
* Contains the definition of registers common to all PowerPC variants.
* If a register definition has been changed in a different PowerPC
* variant, we will case it in #ifndef XXX ... #endif, and have the
* number used in the Programming Environments Manual For 32-Bit
* Implementations of the PowerPC Architecture (a.k.a. Green Book) here.
*/
#ifndef _ASM_POWERPC_REG_H
#define _ASM_POWERPC_REG_H
#ifdef __KERNEL__
#include <linux/stringify.h>
#include <linux/const.h>
#include <asm/asm-const.h>
#include <asm/feature-fixups.h>
/* Pickup Book E specific registers. */
#if defined(CONFIG_BOOKE) || defined(CONFIG_40x)
#include <asm/reg_booke.h>
#endif /* CONFIG_BOOKE || CONFIG_40x */
#ifdef CONFIG_FSL_EMB_PERFMON
#include <asm/reg_fsl_emb.h>
#endif
#define MSR_SF_LG 63 /* Enable 64 bit mode */
#define MSR_ISF_LG 61 /* Interrupt 64b mode valid on 630 */
#define MSR_HV_LG 60 /* Hypervisor state */
#define MSR_TS_T_LG 34 /* Trans Mem state: Transactional */
#define MSR_TS_S_LG 33 /* Trans Mem state: Suspended */
#define MSR_TS_LG 33 /* Trans Mem state (2 bits) */
#define MSR_TM_LG 32 /* Trans Mem Available */
#define MSR_VSX_LG 23 /* Enable VSX */
#define MSR_S_LG 22 /* Secure state */
#define MSR_POW_LG 18 /* Enable Power Management */
#define MSR_WE_LG 18 /* Wait State Enable */
#define MSR_TGPR_LG 17 /* TLB Update registers in use */
#define MSR_CE_LG 17 /* Critical Interrupt Enable */
#define MSR_ILE_LG 16 /* Interrupt Little Endian */
#define MSR_EE_LG 15 /* External Interrupt Enable */
#define MSR_PR_LG 14 /* Problem State / Privilege Level */
#define MSR_FP_LG 13 /* Floating Point enable */
#define MSR_ME_LG 12 /* Machine Check Enable */
#define MSR_FE0_LG 11 /* Floating Exception mode 0 */
#define MSR_SE_LG 10 /* Single Step */
#define MSR_BE_LG 9 /* Branch Trace */
#define MSR_DE_LG 9 /* Debug Exception Enable */
#define MSR_FE1_LG 8 /* Floating Exception mode 1 */
#define MSR_IP_LG 6 /* Exception prefix 0x000/0xFFF */
#define MSR_IR_LG 5 /* Instruction Relocate */
#define MSR_DR_LG 4 /* Data Relocate */
#define MSR_PE_LG 3 /* Protection Enable */
#define MSR_PX_LG 2 /* Protection Exclusive Mode */
#define MSR_PMM_LG 2 /* Performance monitor */
#define MSR_RI_LG 1 /* Recoverable Exception */
#define MSR_LE_LG 0 /* Little Endian */
#ifdef __ASSEMBLY__
#define __MASK(X) (1<<(X))
#else
#define __MASK(X) (1UL<<(X))
#endif
#ifdef CONFIG_PPC64
#define MSR_SF __MASK(MSR_SF_LG) /* Enable 64 bit mode */
#define MSR_ISF __MASK(MSR_ISF_LG) /* Interrupt 64b mode valid on 630 */
#define MSR_HV __MASK(MSR_HV_LG) /* Hypervisor state */
#define MSR_S __MASK(MSR_S_LG) /* Secure state */
#else
/* so tests for these bits fail on 32-bit */
#define MSR_SF 0
#define MSR_ISF 0
#define MSR_HV 0
#endif
/*
* To be used in shared book E/book S, this avoids needing to worry about
* book S/book E in shared code
*/
#ifndef MSR_SPE
#define MSR_SPE 0
#endif
#define MSR_VEC __MASK(MSR_VEC_LG) /* Enable AltiVec */
#define MSR_VSX __MASK(MSR_VSX_LG) /* Enable VSX */
#define MSR_POW __MASK(MSR_POW_LG) /* Enable Power Management */
#define MSR_WE __MASK(MSR_WE_LG) /* Wait State Enable */
#define MSR_TGPR __MASK(MSR_TGPR_LG) /* TLB Update registers in use */
#define MSR_CE __MASK(MSR_CE_LG) /* Critical Interrupt Enable */
#define MSR_ILE __MASK(MSR_ILE_LG) /* Interrupt Little Endian */
#define MSR_EE __MASK(MSR_EE_LG) /* External Interrupt Enable */
#define MSR_PR __MASK(MSR_PR_LG) /* Problem State / Privilege Level */
#define MSR_FP __MASK(MSR_FP_LG) /* Floating Point enable */
#define MSR_ME __MASK(MSR_ME_LG) /* Machine Check Enable */
#define MSR_FE0 __MASK(MSR_FE0_LG) /* Floating Exception mode 0 */
#define MSR_SE __MASK(MSR_SE_LG) /* Single Step */
#define MSR_BE __MASK(MSR_BE_LG) /* Branch Trace */
#define MSR_DE __MASK(MSR_DE_LG) /* Debug Exception Enable */
#define MSR_FE1 __MASK(MSR_FE1_LG) /* Floating Exception mode 1 */
#define MSR_IP __MASK(MSR_IP_LG) /* Exception prefix 0x000/0xFFF */
#define MSR_IR __MASK(MSR_IR_LG) /* Instruction Relocate */
#define MSR_DR __MASK(MSR_DR_LG) /* Data Relocate */
#define MSR_PE __MASK(MSR_PE_LG) /* Protection Enable */
#define MSR_PX __MASK(MSR_PX_LG) /* Protection Exclusive Mode */
#define MSR_PMM __MASK(MSR_PMM_LG) /* Performance monitor */
#define MSR_RI __MASK(MSR_RI_LG) /* Recoverable Exception */
#define MSR_LE __MASK(MSR_LE_LG) /* Little Endian */
#define MSR_TM __MASK(MSR_TM_LG) /* Transactional Mem Available */
#define MSR_TS_N 0 /* Non-transactional */
#define MSR_TS_S __MASK(MSR_TS_S_LG) /* Transaction Suspended */
#define MSR_TS_T __MASK(MSR_TS_T_LG) /* Transaction Transactional */
#define MSR_TS_MASK (MSR_TS_T | MSR_TS_S) /* Transaction State bits */
#define MSR_TM_RESV(x) (((x) & MSR_TS_MASK) == MSR_TS_MASK) /* Reserved */
#define MSR_TM_TRANSACTIONAL(x) (((x) & MSR_TS_MASK) == MSR_TS_T)
#define MSR_TM_SUSPENDED(x) (((x) & MSR_TS_MASK) == MSR_TS_S)
#ifdef CONFIG_PPC_TRANSACTIONAL_MEM
#define MSR_TM_ACTIVE(x) (((x) & MSR_TS_MASK) != 0) /* Transaction active? */
#else
#define MSR_TM_ACTIVE(x) 0
#endif
#if defined(CONFIG_PPC_BOOK3S_64)
/* Server variant */
#define __MSR (MSR_ME | MSR_RI | MSR_IR | MSR_DR | MSR_ISF |MSR_HV)
#ifdef __BIG_ENDIAN__
#define MSR_ __MSR
#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV)
#else
#define MSR_ (__MSR | MSR_LE)
#define MSR_IDLE (MSR_ME | MSR_SF | MSR_HV | MSR_LE)
#define MSR_KERNEL (MSR_ | MSR_64BIT)
#define MSR_USER32 (MSR_ | MSR_PR | MSR_EE)
#define MSR_USER64 (MSR_USER32 | MSR_64BIT)
#elif defined(CONFIG_PPC_BOOK3S_32) || defined(CONFIG_PPC_8xx)
/* Default MSR for kernel mode. */
#define MSR_KERNEL (MSR_ME|MSR_RI|MSR_IR|MSR_DR)
#define MSR_USER (MSR_KERNEL|MSR_PR|MSR_EE)
#ifndef MSR_64BIT
#define MSR_64BIT 0
#endif
/* Condition Register related */
#define CR0_SHIFT 28
#define CR0_MASK 0xF
#define CR0_TBEGIN_FAILURE (0x2 << 28) /* 0b0010 */
/* Power Management - Processor Stop Status and Control Register Fields */
#define PSSCR_RL_MASK 0x0000000F /* Requested Level */
#define PSSCR_MTL_MASK 0x000000F0 /* Maximum Transition Level */
#define PSSCR_TR_MASK 0x00000300 /* Transition State */
#define PSSCR_PSLL_MASK 0x000F0000 /* Power-Saving Level Limit */
#define PSSCR_EC 0x00100000 /* Exit Criterion */
#define PSSCR_ESL 0x00200000 /* Enable State Loss */
#define PSSCR_SD 0x00400000 /* Status Disable */
#define PSSCR_PLS 0xf000000000000000 /* Power-saving Level Status */
#define PSSCR_PLS_SHIFT 60
#define PSSCR_GUEST_VIS 0xf0000000000003ffUL /* Guest-visible PSSCR fields */
#define PSSCR_FAKE_SUSPEND 0x00000400 /* Fake-suspend bit (P9 DD2.2) */
#define PSSCR_FAKE_SUSPEND_LG 10 /* Fake-suspend bit position */
178
179
180
181
182
183
184
185
186
187
188
189
190
191
192
193
194
195
196
197
198
199
200
201
202
203
204
205
206
/* Floating Point Status and Control Register (FPSCR) Fields */
#define FPSCR_FX 0x80000000 /* FPU exception summary */
#define FPSCR_FEX 0x40000000 /* FPU enabled exception summary */
#define FPSCR_VX 0x20000000 /* Invalid operation summary */
#define FPSCR_OX 0x10000000 /* Overflow exception summary */
#define FPSCR_UX 0x08000000 /* Underflow exception summary */
#define FPSCR_ZX 0x04000000 /* Zero-divide exception summary */
#define FPSCR_XX 0x02000000 /* Inexact exception summary */
#define FPSCR_VXSNAN 0x01000000 /* Invalid op for SNaN */
#define FPSCR_VXISI 0x00800000 /* Invalid op for Inv - Inv */
#define FPSCR_VXIDI 0x00400000 /* Invalid op for Inv / Inv */
#define FPSCR_VXZDZ 0x00200000 /* Invalid op for Zero / Zero */
#define FPSCR_VXIMZ 0x00100000 /* Invalid op for Inv * Zero */
#define FPSCR_VXVC 0x00080000 /* Invalid op for Compare */
#define FPSCR_FR 0x00040000 /* Fraction rounded */
#define FPSCR_FI 0x00020000 /* Fraction inexact */
#define FPSCR_FPRF 0x0001f000 /* FPU Result Flags */
#define FPSCR_FPCC 0x0000f000 /* FPU Condition Codes */
#define FPSCR_VXSOFT 0x00000400 /* Invalid op for software request */
#define FPSCR_VXSQRT 0x00000200 /* Invalid op for square root */
#define FPSCR_VXCVI 0x00000100 /* Invalid op for integer convert */
#define FPSCR_VE 0x00000080 /* Invalid op exception enable */
#define FPSCR_OE 0x00000040 /* IEEE overflow exception enable */
#define FPSCR_UE 0x00000020 /* IEEE underflow exception enable */
#define FPSCR_ZE 0x00000010 /* IEEE zero divide exception enable */
#define FPSCR_XE 0x00000008 /* FP inexact exception enable */
#define FPSCR_NI 0x00000004 /* FPU non IEEE-Mode */
#define FPSCR_RN 0x00000003 /* FPU rounding control */
207
208
209
210
211
212
213
214
215
216
217
218
219
220
221
222
223
224
225
226
227
228
229
230
231
232
233
234
235
236
/* Bit definitions for SPEFSCR. */
#define SPEFSCR_SOVH 0x80000000 /* Summary integer overflow high */
#define SPEFSCR_OVH 0x40000000 /* Integer overflow high */
#define SPEFSCR_FGH 0x20000000 /* Embedded FP guard bit high */
#define SPEFSCR_FXH 0x10000000 /* Embedded FP sticky bit high */
#define SPEFSCR_FINVH 0x08000000 /* Embedded FP invalid operation high */
#define SPEFSCR_FDBZH 0x04000000 /* Embedded FP div by zero high */
#define SPEFSCR_FUNFH 0x02000000 /* Embedded FP underflow high */
#define SPEFSCR_FOVFH 0x01000000 /* Embedded FP overflow high */
#define SPEFSCR_FINXS 0x00200000 /* Embedded FP inexact sticky */
#define SPEFSCR_FINVS 0x00100000 /* Embedded FP invalid op. sticky */
#define SPEFSCR_FDBZS 0x00080000 /* Embedded FP div by zero sticky */
#define SPEFSCR_FUNFS 0x00040000 /* Embedded FP underflow sticky */
#define SPEFSCR_FOVFS 0x00020000 /* Embedded FP overflow sticky */
#define SPEFSCR_MODE 0x00010000 /* Embedded FP mode */
#define SPEFSCR_SOV 0x00008000 /* Integer summary overflow */
#define SPEFSCR_OV 0x00004000 /* Integer overflow */
#define SPEFSCR_FG 0x00002000 /* Embedded FP guard bit */
#define SPEFSCR_FX 0x00001000 /* Embedded FP sticky bit */
#define SPEFSCR_FINV 0x00000800 /* Embedded FP invalid operation */
#define SPEFSCR_FDBZ 0x00000400 /* Embedded FP div by zero */
#define SPEFSCR_FUNF 0x00000200 /* Embedded FP underflow */
#define SPEFSCR_FOVF 0x00000100 /* Embedded FP overflow */
#define SPEFSCR_FINXE 0x00000040 /* Embedded FP inexact enable */
#define SPEFSCR_FINVE 0x00000020 /* Embedded FP invalid op. enable */
#define SPEFSCR_FDBZE 0x00000010 /* Embedded FP div by zero enable */
#define SPEFSCR_FUNFE 0x00000008 /* Embedded FP underflow enable */
#define SPEFSCR_FOVFE 0x00000004 /* Embedded FP overflow enable */
#define SPEFSCR_FRMC 0x00000003 /* Embedded FP rounding mode control */
/* Special Purpose Registers (SPRNs)*/
#ifdef CONFIG_40x
#define SPRN_PID 0x3B1 /* Process ID */
#else
#define SPRN_PID 0x030 /* Process ID */
#ifdef CONFIG_BOOKE
#define SPRN_PID0 SPRN_PID/* Process ID Register 0 */
#endif
#endif
#define SPRN_CTR 0x009 /* Count Register */
#define SPRN_CFAR 0x1c /* Come From Address Register */
#define SPRN_AMR 0x1d /* Authority Mask Register */
#define SPRN_UAMOR 0x9d /* User Authority Mask Override Register */
#define SPRN_AMOR 0x15d /* Authority Mask Override Register */
#define SPRN_ACOP 0x1F /* Available Coprocessor Register */
#define SPRN_TFIAR 0x81 /* Transaction Failure Inst Addr */
#define SPRN_TEXASR 0x82 /* Transaction EXception & Summary */
#define SPRN_TEXASRU 0x83 /* '' '' '' Upper 32 */
#define TEXASR_FC_LG (63 - 7) /* Failure Code */
#define TEXASR_AB_LG (63 - 31) /* Abort */
#define TEXASR_SU_LG (63 - 32) /* Suspend */
#define TEXASR_HV_LG (63 - 34) /* Hypervisor state*/
#define TEXASR_PR_LG (63 - 35) /* Privilege level */
#define TEXASR_FS_LG (63 - 36) /* failure summary */
#define TEXASR_EX_LG (63 - 37) /* TFIAR exact bit */
#define TEXASR_ROT_LG (63 - 38) /* ROT bit */
#define TEXASR_ABORT __MASK(TEXASR_AB_LG) /* terminated by tabort or treclaim */
#define TEXASR_SUSP __MASK(TEXASR_SU_LG) /* tx failed in suspended state */
#define TEXASR_HV __MASK(TEXASR_HV_LG) /* MSR[HV] when failure occurred */
#define TEXASR_PR __MASK(TEXASR_PR_LG) /* MSR[PR] when failure occurred */
#define TEXASR_FS __MASK(TEXASR_FS_LG) /* TEXASR Failure Summary */
#define TEXASR_EXACT __MASK(TEXASR_EX_LG) /* TFIAR value is exact */
#define TEXASR_ROT __MASK(TEXASR_ROT_LG)
#define TEXASR_FC (ASM_CONST(0xFF) << TEXASR_FC_LG)
#define SPRN_TFHAR 0x80 /* Transaction Failure Handler Addr */
#define SPRN_TIDR 144 /* Thread ID register */
#define SPRN_CTRLF 0x088
#define SPRN_CTRLT 0x098
#define CTRL_CT 0xc0000000 /* current thread */
#define CTRL_CT0 0x80000000 /* thread 0 */
#define CTRL_CT1 0x40000000 /* thread 1 */
#define CTRL_TE 0x00c00000 /* thread enable */
#define SPRN_DAWR1 0xB5
#define SPRN_RPR 0xBA /* Relative Priority Register */
#define SPRN_CIABR 0xBB
#define CIABR_PRIV 0x3
#define CIABR_PRIV_USER 1
#define CIABR_PRIV_SUPER 2
#define CIABR_PRIV_HYPER 3
#define SPRN_DAWRX1 0xBD
#define DAWRX_USER __MASK(0)
#define DAWRX_KERNEL __MASK(1)
#define DAWRX_HYP __MASK(2)
#define DAWRX_WTI __MASK(3)
#define DAWRX_WT __MASK(4)
#define DAWRX_DR __MASK(5)
#define DAWRX_DW __MASK(6)
#define SPRN_DABR 0x3F5 /* Data Address Breakpoint Register */
#define SPRN_DABR2 0x13D /* e300 */
#define SPRN_DABRX 0x3F7 /* Data Address Breakpoint Register Extension */
#define DABRX_USER __MASK(0)
#define DABRX_KERNEL __MASK(1)
#define DABRX_HYP __MASK(2)
#define DABRX_BTI __MASK(3)
#define DABRX_ALL (DABRX_BTI | DABRX_HYP | DABRX_KERNEL | DABRX_USER)
#define SPRN_DAR 0x013 /* Data Address Register */
#define SPRN_DBCR 0x136 /* e300 Data Breakpoint Control Reg */
#define SPRN_DSISR 0x012 /* Data Storage Interrupt Status Register */
315
316
317
318
319
320
321
322
323
324
325
326
327
328
329
330
331
332
333
334
335
336
337
338
339
340
341
342
343
344
345
346
347
348
349
350
351
352
353
354
355
356
357
358
359
360
361
362
363
364
365
366
367
368
369
370
371
372
#define DSISR_BAD_DIRECT_ST 0x80000000 /* Obsolete: Direct store error */
#define DSISR_NOHPTE 0x40000000 /* no translation found */
#define DSISR_ATTR_CONFLICT 0x20000000 /* P9: Process vs. Partition attr */
#define DSISR_NOEXEC_OR_G 0x10000000 /* Alias of SRR1 bit, see below */
#define DSISR_PROTFAULT 0x08000000 /* protection fault */
#define DSISR_BADACCESS 0x04000000 /* bad access to CI or G */
#define DSISR_ISSTORE 0x02000000 /* access was a store */
#define DSISR_DABRMATCH 0x00400000 /* hit data breakpoint */
#define DSISR_NOSEGMENT 0x00200000 /* STAB miss (unsupported) */
#define DSISR_KEYFAULT 0x00200000 /* Storage Key fault */
#define DSISR_BAD_EXT_CTRL 0x00100000 /* Obsolete: External ctrl error */
#define DSISR_UNSUPP_MMU 0x00080000 /* P9: Unsupported MMU config */
#define DSISR_SET_RC 0x00040000 /* P9: Failed setting of R/C bits */
#define DSISR_PRTABLE_FAULT 0x00020000 /* P9: Fault on process table */
#define DSISR_ICSWX_NO_CT 0x00004000 /* P7: icswx unavailable cp type */
#define DSISR_BAD_COPYPASTE 0x00000008 /* P9: Copy/Paste on wrong memtype */
#define DSISR_BAD_AMO 0x00000004 /* P9: Incorrect AMO opcode */
#define DSISR_BAD_CI_LDST 0x00000002 /* P8: Bad HV CI load/store */
/*
* DSISR_NOEXEC_OR_G doesn't actually exist. This bit is always
* 0 on DSIs. However, on ISIs, the corresponding bit in SRR1
* indicates an attempt at executing from a no-execute PTE
* or segment or from a guarded page.
*
* We add a definition here for completeness as we alias
* DSISR and SRR1 in do_page_fault.
*/
/*
* DSISR bits that are treated as a fault. Any bit set
* here will skip hash_page, and cause do_page_fault to
* trigger a SIGBUS or SIGSEGV:
*/
#define DSISR_BAD_FAULT_32S (DSISR_BAD_DIRECT_ST | \
DSISR_BADACCESS | \
DSISR_BAD_EXT_CTRL)
#define DSISR_BAD_FAULT_64S (DSISR_BAD_FAULT_32S | \
DSISR_ATTR_CONFLICT | \
DSISR_UNSUPP_MMU | \
DSISR_PRTABLE_FAULT | \
DSISR_ICSWX_NO_CT | \
DSISR_BAD_COPYPASTE | \
DSISR_BAD_AMO | \
DSISR_BAD_CI_LDST)
/*
* These bits are equivalent in SRR1 and DSISR for 0x400
* instruction access interrupts on Book3S
*/
#define DSISR_SRR1_MATCH_32S (DSISR_NOHPTE | \
DSISR_NOEXEC_OR_G | \
DSISR_PROTFAULT)
#define DSISR_SRR1_MATCH_64S (DSISR_SRR1_MATCH_32S | \
DSISR_KEYFAULT | \
DSISR_UNSUPP_MMU | \
DSISR_SET_RC | \
DSISR_PRTABLE_FAULT)
#define SPRN_TBRL 0x10C /* Time Base Read Lower Register (user, R/O) */
#define SPRN_TBRU 0x10D /* Time Base Read Upper Register (user, R/O) */
#define SPRN_CIR 0x11B /* Chip Information Register (hyper, R/0) */
#define SPRN_TBWL 0x11C /* Time Base Lower Register (super, R/W) */
#define SPRN_TBWU 0x11D /* Time Base Upper Register (super, R/W) */
#define SPRN_TBU40 0x11E /* Timebase upper 40 bits (hyper, R/W) */
#define SPRN_SPURR 0x134 /* Scaled PURR */
#define SPRN_HSPRG0 0x130 /* Hypervisor Scratch 0 */
#define SPRN_HSPRG1 0x131 /* Hypervisor Scratch 1 */
#define SPRN_HDSISR 0x132
#define SPRN_HDAR 0x133
#define SPRN_HDEC 0x136 /* Hypervisor Decrementer */
#define SPRN_HIOR 0x137 /* 970 Hypervisor interrupt offset */
#define SPRN_RMOR 0x138 /* Real mode offset register */
#define SPRN_HRMOR 0x139 /* Real mode offset register */
#define SPRN_HSRR0 0x13A /* Hypervisor Save/Restore 0 */
#define SPRN_HSRR1 0x13B /* Hypervisor Save/Restore 1 */
#define SPRN_ASDR 0x330 /* Access segment descriptor register */
#define SPRN_IC 0x350 /* Virtual Instruction Count */
#define SPRN_VTB 0x351 /* Virtual Time Base */
#define SPRN_LDBAR 0x352 /* LD Base Address Register */
#define SPRN_PMICR 0x354 /* Power Management Idle Control Reg */
#define SPRN_PMSR 0x355 /* Power Management Status Reg */
#define SPRN_PMMAR 0x356 /* Power Management Memory Activity Register */
#define SPRN_PSSCR 0x357 /* Processor Stop Status and Control Register (ISA 3.0) */
#define SPRN_PSSCR_PR 0x337 /* PSSCR ISA 3.0, privileged mode access */
#define SPRN_PMCR 0x374 /* Power Management Control Register */
#define SPRN_RWMR 0x375 /* Region-Weighting Mode Register */
/* HFSCR and FSCR bit numbers are the same */
#define FSCR_PREFIX_LG 13 /* Enable Prefix Instructions */
#define FSCR_SCV_LG 12 /* Enable System Call Vectored */
#define FSCR_MSGP_LG 10 /* Enable MSGP */
#define FSCR_TAR_LG 8 /* Enable Target Address Register */
#define FSCR_EBB_LG 7 /* Enable Event Based Branching */
#define FSCR_TM_LG 5 /* Enable Transactional Memory */
#define FSCR_BHRB_LG 4 /* Enable Branch History Rolling Buffer*/
#define FSCR_PM_LG 3 /* Enable prob/priv access to PMU SPRs */
#define FSCR_DSCR_LG 2 /* Enable Data Stream Control Register */
#define FSCR_VECVSX_LG 1 /* Enable VMX/VSX */
#define FSCR_FP_LG 0 /* Enable Floating Point */
#define SPRN_FSCR 0x099 /* Facility Status & Control Register */
#define FSCR_PREFIX __MASK(FSCR_PREFIX_LG)
#define FSCR_SCV __MASK(FSCR_SCV_LG)
#define FSCR_TAR __MASK(FSCR_TAR_LG)
#define FSCR_EBB __MASK(FSCR_EBB_LG)
#define FSCR_DSCR __MASK(FSCR_DSCR_LG)
#define SPRN_HFSCR 0xbe /* HV=1 Facility Status & Control Register */
#define HFSCR_PREFIX __MASK(FSCR_PREFIX_LG)
#define HFSCR_MSGP __MASK(FSCR_MSGP_LG)
#define HFSCR_TAR __MASK(FSCR_TAR_LG)
#define HFSCR_EBB __MASK(FSCR_EBB_LG)
#define HFSCR_TM __MASK(FSCR_TM_LG)
#define HFSCR_PM __MASK(FSCR_PM_LG)
#define HFSCR_BHRB __MASK(FSCR_BHRB_LG)
#define HFSCR_DSCR __MASK(FSCR_DSCR_LG)
#define HFSCR_VECVSX __MASK(FSCR_VECVSX_LG)
#define HFSCR_FP __MASK(FSCR_FP_LG)
#define HFSCR_INTR_CAUSE (ASM_CONST(0xFF) << 56) /* interrupt cause */
#define SPRN_TAR 0x32f /* Target Address Register */
#define SPRN_LPCR 0x13E /* LPAR Control Register */
#define LPCR_VPM0 ASM_CONST(0x8000000000000000)
#define LPCR_VPM1 ASM_CONST(0x4000000000000000)
#define LPCR_ISL ASM_CONST(0x2000000000000000)
#define LPCR_VC_SH 61
#define LPCR_DPFD_SH 52
#define LPCR_DPFD (ASM_CONST(7) << LPCR_DPFD_SH)
#define LPCR_VRMASD_SH 47
#define LPCR_VRMASD (ASM_CONST(0x1f) << LPCR_VRMASD_SH)
#define LPCR_VRMA_L ASM_CONST(0x0008000000000000)
#define LPCR_VRMA_LP0 ASM_CONST(0x0001000000000000)
#define LPCR_VRMA_LP1 ASM_CONST(0x0000800000000000)
#define LPCR_RMLS 0x1C000000 /* Implementation dependent RMO limit sel */
#define LPCR_RMLS_SH 26
#define LPCR_ILE ASM_CONST(0x0000000002000000) /* !HV irqs set MSR:LE */
#define LPCR_AIL ASM_CONST(0x0000000001800000) /* Alternate interrupt location */
#define LPCR_AIL_0 ASM_CONST(0x0000000000000000) /* MMU off exception offset 0x0 */
#define LPCR_AIL_3 ASM_CONST(0x0000000001800000) /* MMU on exception offset 0xc00...4xxx */
#define LPCR_ONL ASM_CONST(0x0000000000040000) /* online - PURR/SPURR count */
#define LPCR_LD ASM_CONST(0x0000000000020000) /* large decremeter */
#define LPCR_PECE ASM_CONST(0x000000000001f000) /* powersave exit cause enable */
#define LPCR_PECEDP ASM_CONST(0x0000000000010000) /* directed priv dbells cause exit */
#define LPCR_PECEDH ASM_CONST(0x0000000000008000) /* directed hyp dbells cause exit */
#define LPCR_PECE0 ASM_CONST(0x0000000000004000) /* ext. exceptions can cause exit */
#define LPCR_PECE1 ASM_CONST(0x0000000000002000) /* decrementer can cause exit */
#define LPCR_PECE2 ASM_CONST(0x0000000000001000) /* machine check etc can cause exit */
#define LPCR_PECE_HVEE ASM_CONST(0x0000400000000000) /* P9 Wakeup on HV interrupts */
#define LPCR_MER ASM_CONST(0x0000000000000800) /* Mediated External Exception */
#define LPCR_MER_SH 11
#define LPCR_GTSE ASM_CONST(0x0000000000000400) /* Guest Translation Shootdown Enable */
#define LPCR_TC ASM_CONST(0x0000000000000200) /* Translation control */
#define LPCR_HEIC ASM_CONST(0x0000000000000010) /* Hypervisor External Interrupt Control */
#define LPCR_LPES 0x0000000c
#define LPCR_LPES0 ASM_CONST(0x0000000000000008) /* LPAR Env selector 0 */
#define LPCR_LPES1 ASM_CONST(0x0000000000000004) /* LPAR Env selector 1 */
#define LPCR_LPES_SH 2
#define LPCR_RMI ASM_CONST(0x0000000000000002) /* real mode is cache inhibit */
#define LPCR_HVICE ASM_CONST(0x0000000000000002) /* P9: HV interrupt enable */
#define LPCR_HDICE ASM_CONST(0x0000000000000001) /* Hyp Decr enable (HV,PR,EE) */
#define LPCR_UPRT ASM_CONST(0x0000000000400000) /* Use Process Table (ISA 3) */
#define LPCR_HR ASM_CONST(0x0000000000100000)
#define SPRN_LPID 0x13F /* Logical Partition Identifier */
#define LPID_RSVD 0x3ff /* Reserved LPID for partn switching */
#define SPRN_HMER 0x150 /* Hypervisor maintenance exception reg */
#define HMER_DEBUG_TRIG (1ul << (63 - 17)) /* Debug trigger */
#define SPRN_HMEER 0x151 /* Hyp maintenance exception enable reg */
#define SPRN_PCR 0x152 /* Processor compatibility register */
#define PCR_VEC_DIS (__MASK(63-0)) /* Vec. disable (bit NA since POWER8) */
#define PCR_VSX_DIS (__MASK(63-1)) /* VSX disable (bit NA since POWER8) */
#define PCR_TM_DIS (__MASK(63-2)) /* Trans. memory disable (POWER8) */
#define PCR_MMA_DIS (__MASK(63-3)) /* Matrix-Multiply Accelerator */
#define PCR_HIGH_BITS (PCR_MMA_DIS | PCR_VEC_DIS | PCR_VSX_DIS | PCR_TM_DIS)
Suraj Jitindar Singh
committed
/*
* These bits are used in the function kvmppc_set_arch_compat() to specify and
* determine both the compatibility level which we want to emulate and the
* compatibility level which the host is capable of emulating.
*/
#define PCR_ARCH_300 0x10 /* Architecture 3.00 */
Suraj Jitindar Singh
committed
#define PCR_ARCH_207 0x8 /* Architecture 2.07 */
#define PCR_ARCH_206 0x4 /* Architecture 2.06 */
#define PCR_ARCH_205 0x2 /* Architecture 2.05 */
#define PCR_LOW_BITS (PCR_ARCH_207 | PCR_ARCH_206 | PCR_ARCH_205 | PCR_ARCH_300)
#define PCR_MASK ~(PCR_HIGH_BITS | PCR_LOW_BITS) /* PCR Reserved Bits */
#define SPRN_HEIR 0x153 /* Hypervisor Emulated Instruction Register */
#define SPRN_TLBINDEXR 0x154 /* P7 TLB control register */
#define SPRN_TLBVPNR 0x155 /* P7 TLB control register */
#define SPRN_TLBRPNR 0x156 /* P7 TLB control register */
#define SPRN_TLBLPIDR 0x157 /* P7 TLB control register */
#define SPRN_DBAT0L 0x219 /* Data BAT 0 Lower Register */
#define SPRN_DBAT0U 0x218 /* Data BAT 0 Upper Register */
#define SPRN_DBAT1L 0x21B /* Data BAT 1 Lower Register */
#define SPRN_DBAT1U 0x21A /* Data BAT 1 Upper Register */
#define SPRN_DBAT2L 0x21D /* Data BAT 2 Lower Register */
#define SPRN_DBAT2U 0x21C /* Data BAT 2 Upper Register */
#define SPRN_DBAT3L 0x21F /* Data BAT 3 Lower Register */
#define SPRN_DBAT3U 0x21E /* Data BAT 3 Upper Register */
#define SPRN_DBAT4L 0x239 /* Data BAT 4 Lower Register */
#define SPRN_DBAT4U 0x238 /* Data BAT 4 Upper Register */
#define SPRN_DBAT5L 0x23B /* Data BAT 5 Lower Register */
#define SPRN_DBAT5U 0x23A /* Data BAT 5 Upper Register */
#define SPRN_DBAT6L 0x23D /* Data BAT 6 Lower Register */
#define SPRN_DBAT6U 0x23C /* Data BAT 6 Upper Register */
#define SPRN_DBAT7L 0x23F /* Data BAT 7 Lower Register */
#define SPRN_DBAT7U 0x23E /* Data BAT 7 Upper Register */
#define SPRN_PPR 0x380 /* SMT Thread status Register */
#define SPRN_TSCR 0x399 /* Thread Switch Control Register */
#define SPRN_DEC 0x016 /* Decrement Register */
#define SPRN_DER 0x095 /* Debug Enable Register */
#define DER_RSTE 0x40000000 /* Reset Interrupt */
#define DER_CHSTPE 0x20000000 /* Check Stop */
#define DER_MCIE 0x10000000 /* Machine Check Interrupt */
#define DER_EXTIE 0x02000000 /* External Interrupt */
#define DER_ALIE 0x01000000 /* Alignment Interrupt */
#define DER_PRIE 0x00800000 /* Program Interrupt */
#define DER_FPUVIE 0x00400000 /* FP Unavailable Interrupt */
#define DER_DECIE 0x00200000 /* Decrementer Interrupt */
#define DER_SYSIE 0x00040000 /* System Call Interrupt */
#define DER_TRE 0x00020000 /* Trace Interrupt */
#define DER_SEIE 0x00004000 /* FP SW Emulation Interrupt */
#define DER_ITLBMSE 0x00002000 /* Imp. Spec. Instruction TLB Miss */
#define DER_ITLBERE 0x00001000 /* Imp. Spec. Instruction TLB Error */
#define DER_DTLBMSE 0x00000800 /* Imp. Spec. Data TLB Miss */
#define DER_DTLBERE 0x00000400 /* Imp. Spec. Data TLB Error */
#define DER_LBRKE 0x00000008 /* Load/Store Breakpoint Interrupt */
#define DER_IBRKE 0x00000004 /* Instruction Breakpoint Interrupt */
#define DER_EBRKE 0x00000002 /* External Breakpoint Interrupt */
#define DER_DPIE 0x00000001 /* Dev. Port Nonmaskable Request */
#define SPRN_DMISS 0x3D0 /* Data TLB Miss Register */
#define SPRN_DHDES 0x0B1 /* Directed Hyp. Doorbell Exc. State */
#define SPRN_DPDES 0x0B0 /* Directed Priv. Doorbell Exc. State */
#define SPRN_EAR 0x11A /* External Address Register */
#define SPRN_HASH1 0x3D2 /* Primary Hash Address Register */
#define SPRN_HASH2 0x3D3 /* Secondary Hash Address Register */
#define SPRN_HID0 0x3F0 /* Hardware Implementation Register 0 */
Paul Mackerras
committed
#define HID0_HDICE_SH (63 - 23) /* 970 HDEC interrupt enable */
551
552
553
554
555
556
557
558
559
560
561
562
563
564
565
566
567
568
569
570
571
572
573
574
575
576
577
#define HID0_EMCP (1<<31) /* Enable Machine Check pin */
#define HID0_EBA (1<<29) /* Enable Bus Address Parity */
#define HID0_EBD (1<<28) /* Enable Bus Data Parity */
#define HID0_SBCLK (1<<27)
#define HID0_EICE (1<<26)
#define HID0_TBEN (1<<26) /* Timebase enable - 745x */
#define HID0_ECLK (1<<25)
#define HID0_PAR (1<<24)
#define HID0_STEN (1<<24) /* Software table search enable - 745x */
#define HID0_HIGH_BAT (1<<23) /* Enable high BATs - 7455 */
#define HID0_DOZE (1<<23)
#define HID0_NAP (1<<22)
#define HID0_SLEEP (1<<21)
#define HID0_DPM (1<<20)
#define HID0_BHTCLR (1<<18) /* Clear branch history table - 7450 */
#define HID0_XAEN (1<<17) /* Extended addressing enable - 7450 */
#define HID0_NHR (1<<16) /* Not hard reset (software bit-7450)*/
#define HID0_ICE (1<<15) /* Instruction Cache Enable */
#define HID0_DCE (1<<14) /* Data Cache Enable */
#define HID0_ILOCK (1<<13) /* Instruction Cache Lock */
#define HID0_DLOCK (1<<12) /* Data Cache Lock */
#define HID0_ICFI (1<<11) /* Instr. Cache Flash Invalidate */
#define HID0_DCI (1<<10) /* Data Cache Invalidate */
#define HID0_SPD (1<<9) /* Speculative disable */
#define HID0_DAPUEN (1<<8) /* Debug APU enable */
#define HID0_SGE (1<<7) /* Store Gathering Enable */
#define HID0_SIED (1<<7) /* Serial Instr. Execution [Disable] */
#define HID0_DCFA (1<<6) /* Data Cache Flush Assist */
#define HID0_LRSTK (1<<4) /* Link register stack - 745x */
#define HID0_BTIC (1<<5) /* Branch Target Instr Cache Enable */
#define HID0_ABE (1<<3) /* Address Broadcast Enable */
#define HID0_FOLD (1<<3) /* Branch Folding enable - 745x */
#define HID0_BHTE (1<<2) /* Branch History Table Enable */
#define HID0_BTCD (1<<1) /* Branch target cache disable */
#define HID0_NOPDST (1<<1) /* No-op dst, dstt, etc. instr. */
#define HID0_NOPTI (1<<0) /* No-op dcbt and dcbst instr. */
/* POWER8 HID0 bits */
#define HID0_POWER8_4LPARMODE __MASK(61)
#define HID0_POWER8_2LPARMODE __MASK(57)
#define HID0_POWER8_1TO2LPAR __MASK(52)
#define HID0_POWER8_1TO4LPAR __MASK(51)
#define HID0_POWER8_DYNLPARDIS __MASK(48)
/* POWER9 HID0 bits */
#define HID0_POWER9_RADIX __MASK(63 - 8)
#define SPRN_HID1 0x3F1 /* Hardware Implementation Register 1 */
#ifdef CONFIG_PPC_BOOK3S_32
#define HID1_EMCP (1<<31) /* 7450 Machine Check Pin Enable */
#define HID1_DFS (1<<22) /* 7447A Dynamic Frequency Scaling */
#define HID1_PC0 (1<<16) /* 7450 PLL_CFG[0] */
#define HID1_PC1 (1<<15) /* 7450 PLL_CFG[1] */
#define HID1_PC2 (1<<14) /* 7450 PLL_CFG[2] */
#define HID1_PC3 (1<<13) /* 7450 PLL_CFG[3] */
#define HID1_SYNCBE (1<<11) /* 7450 ABE for sync, eieio */
#define HID1_ABE (1<<10) /* 7450 Address Broadcast Enable */
#define HID1_PS (1<<16) /* 750FX PLL selection */
#define SPRN_HID2 0x3F8 /* Hardware Implementation Register 2 */
#define SPRN_HID2_GEKKO 0x398 /* Gekko HID2 Register */
#define SPRN_IABR 0x3F2 /* Instruction Address Breakpoint Register */
#define SPRN_IABR2 0x3FA /* 83xx */
#define SPRN_IBCR 0x135 /* 83xx Insn Breakpoint Control Reg */
#define SPRN_IAMR 0x03D /* Instr. Authority Mask Reg */
#define SPRN_HID4 0x3F4 /* 970 HID4 */
Paul Mackerras
committed
#define HID4_LPES0 (1ul << (63-0)) /* LPAR env. sel. bit 0 */
#define HID4_RMLS2_SH (63 - 2) /* Real mode limit bottom 2 bits */
#define HID4_LPID5_SH (63 - 6) /* partition ID bottom 4 bits */
#define HID4_RMOR_SH (63 - 22) /* real mode offset (16 bits) */
#define HID4_RMOR (0xFFFFul << HID4_RMOR_SH)
Paul Mackerras
committed
#define HID4_LPES1 (1 << (63-57)) /* LPAR env. sel. bit 1 */
#define HID4_RMLS0_SH (63 - 58) /* Real mode limit top bit */
#define HID4_LPID1_SH 0 /* partition ID top 2 bits */
#define SPRN_HID4_GEKKO 0x3F3 /* Gekko HID4 */
#define SPRN_HID5 0x3F6 /* 970 HID5 */
#define SPRN_HID6 0x3F9 /* BE HID 6 */
#define HID6_LB (0x0F<<12) /* Concurrent Large Page Modes */
#define HID6_DLP (1<<20) /* Disable all large page modes (4K only) */
#define SPRN_TSC_CELL 0x399 /* Thread switch control on Cell */
#define TSC_CELL_DEC_ENABLE_0 0x400000 /* Decrementer Interrupt */
#define TSC_CELL_DEC_ENABLE_1 0x200000 /* Decrementer Interrupt */
#define TSC_CELL_EE_ENABLE 0x100000 /* External Interrupt */
#define TSC_CELL_EE_BOOST 0x080000 /* External Interrupt Boost */
#define SPRN_TSC 0x3FD /* Thread switch control on others */
#define SPRN_TST 0x3FC /* Thread switch timeout on others */
#if !defined(SPRN_IAC1) && !defined(SPRN_IAC2)
#define SPRN_IAC1 0x3F4 /* Instruction Address Compare 1 */
#define SPRN_IAC2 0x3F5 /* Instruction Address Compare 2 */
#endif
#define SPRN_IBAT0L 0x211 /* Instruction BAT 0 Lower Register */
#define SPRN_IBAT0U 0x210 /* Instruction BAT 0 Upper Register */
#define SPRN_IBAT1L 0x213 /* Instruction BAT 1 Lower Register */
#define SPRN_IBAT1U 0x212 /* Instruction BAT 1 Upper Register */
#define SPRN_IBAT2L 0x215 /* Instruction BAT 2 Lower Register */
#define SPRN_IBAT2U 0x214 /* Instruction BAT 2 Upper Register */
#define SPRN_IBAT3L 0x217 /* Instruction BAT 3 Lower Register */
#define SPRN_IBAT3U 0x216 /* Instruction BAT 3 Upper Register */
#define SPRN_IBAT4L 0x231 /* Instruction BAT 4 Lower Register */
#define SPRN_IBAT4U 0x230 /* Instruction BAT 4 Upper Register */
#define SPRN_IBAT5L 0x233 /* Instruction BAT 5 Lower Register */
#define SPRN_IBAT5U 0x232 /* Instruction BAT 5 Upper Register */
#define SPRN_IBAT6L 0x235 /* Instruction BAT 6 Lower Register */
#define SPRN_IBAT6U 0x234 /* Instruction BAT 6 Upper Register */
#define SPRN_IBAT7L 0x237 /* Instruction BAT 7 Lower Register */
#define SPRN_IBAT7U 0x236 /* Instruction BAT 7 Upper Register */
#define SPRN_ICMP 0x3D5 /* Instruction TLB Compare Register */
#define SPRN_ICTC 0x3FB /* Instruction Cache Throttling Control Reg */
#define SPRN_ICTRL 0x3F3 /* 1011 7450 icache and interrupt ctrl */
#define ICTRL_EICE 0x08000000 /* enable icache parity errs */
#define ICTRL_EDC 0x04000000 /* enable dcache parity errs */
#define ICTRL_EICP 0x00000100 /* enable icache par. check */
#define SPRN_IMISS 0x3D4 /* Instruction TLB Miss Register */
#define SPRN_IMMR 0x27E /* Internal Memory Map Register */
#define SPRN_L2CR 0x3F9 /* Level 2 Cache Control Register */
667
668
669
670
671
672
673
674
675
676
677
678
679
680
681
682
683
684
685
686
687
688
689
690
691
692
693
694
695
696
697
698
699
700
#define SPRN_L2CR2 0x3f8
#define L2CR_L2E 0x80000000 /* L2 enable */
#define L2CR_L2PE 0x40000000 /* L2 parity enable */
#define L2CR_L2SIZ_MASK 0x30000000 /* L2 size mask */
#define L2CR_L2SIZ_256KB 0x10000000 /* L2 size 256KB */
#define L2CR_L2SIZ_512KB 0x20000000 /* L2 size 512KB */
#define L2CR_L2SIZ_1MB 0x30000000 /* L2 size 1MB */
#define L2CR_L2CLK_MASK 0x0e000000 /* L2 clock mask */
#define L2CR_L2CLK_DISABLED 0x00000000 /* L2 clock disabled */
#define L2CR_L2CLK_DIV1 0x02000000 /* L2 clock / 1 */
#define L2CR_L2CLK_DIV1_5 0x04000000 /* L2 clock / 1.5 */
#define L2CR_L2CLK_DIV2 0x08000000 /* L2 clock / 2 */
#define L2CR_L2CLK_DIV2_5 0x0a000000 /* L2 clock / 2.5 */
#define L2CR_L2CLK_DIV3 0x0c000000 /* L2 clock / 3 */
#define L2CR_L2RAM_MASK 0x01800000 /* L2 RAM type mask */
#define L2CR_L2RAM_FLOW 0x00000000 /* L2 RAM flow through */
#define L2CR_L2RAM_PIPE 0x01000000 /* L2 RAM pipelined */
#define L2CR_L2RAM_PIPE_LW 0x01800000 /* L2 RAM pipelined latewr */
#define L2CR_L2DO 0x00400000 /* L2 data only */
#define L2CR_L2I 0x00200000 /* L2 global invalidate */
#define L2CR_L2CTL 0x00100000 /* L2 RAM control */
#define L2CR_L2WT 0x00080000 /* L2 write-through */
#define L2CR_L2TS 0x00040000 /* L2 test support */
#define L2CR_L2OH_MASK 0x00030000 /* L2 output hold mask */
#define L2CR_L2OH_0_5 0x00000000 /* L2 output hold 0.5 ns */
#define L2CR_L2OH_1_0 0x00010000 /* L2 output hold 1.0 ns */
#define L2CR_L2SL 0x00008000 /* L2 DLL slow */
#define L2CR_L2DF 0x00004000 /* L2 differential clock */
#define L2CR_L2BYP 0x00002000 /* L2 DLL bypass */
#define L2CR_L2IP 0x00000001 /* L2 GI in progress */
#define L2CR_L2IO_745x 0x00100000 /* L2 instr. only (745x) */
#define L2CR_L2DO_745x 0x00010000 /* L2 data only (745x) */
#define L2CR_L2REP_745x 0x00001000 /* L2 repl. algorithm (745x) */
#define L2CR_L2HWF_745x 0x00000800 /* L2 hardware flush (745x) */
#define SPRN_L3CR 0x3FA /* Level 3 Cache Control Register */
#define L3CR_L3E 0x80000000 /* L3 enable */
#define L3CR_L3PE 0x40000000 /* L3 data parity enable */
#define L3CR_L3APE 0x20000000 /* L3 addr parity enable */
#define L3CR_L3SIZ 0x10000000 /* L3 size */
#define L3CR_L3CLKEN 0x08000000 /* L3 clock enable */
#define L3CR_L3RES 0x04000000 /* L3 special reserved bit */
#define L3CR_L3CLKDIV 0x03800000 /* L3 clock divisor */
#define L3CR_L3IO 0x00400000 /* L3 instruction only */
#define L3CR_L3SPO 0x00040000 /* L3 sample point override */
#define L3CR_L3CKSP 0x00030000 /* L3 clock sample point */
#define L3CR_L3PSP 0x0000e000 /* L3 P-clock sample point */
#define L3CR_L3REP 0x00001000 /* L3 replacement algorithm */
#define L3CR_L3HWF 0x00000800 /* L3 hardware flush */
#define L3CR_L3I 0x00000400 /* L3 global invalidate */
#define L3CR_L3RT 0x00000300 /* L3 SRAM type */
#define L3CR_L3NIRCA 0x00000080 /* L3 non-integer ratio clock adj. */
#define L3CR_L3DO 0x00000040 /* L3 data only mode */
#define L3CR_PMEN 0x00000004 /* L3 private memory enable */
#define L3CR_PMSIZ 0x00000001 /* L3 private memory size */
#define SPRN_MSSCR0 0x3f6 /* Memory Subsystem Control Register 0 */
#define SPRN_MSSSR0 0x3f7 /* Memory Subsystem Status Register 1 */
#define SPRN_LDSTCR 0x3f8 /* Load/Store control register */
#define SPRN_LDSTDB 0x3f4 /* */
#define SPRN_LR 0x008 /* Link Register */
#ifndef SPRN_PIR
#define SPRN_PIR 0x3FF /* Processor Identification Register */
#endif
#define SPRN_TIR 0x1BE /* Thread Identification Register */
#define SPRN_PTCR 0x1D0 /* Partition table control Register */
#define SPRN_PSPB 0x09F /* Problem State Priority Boost reg */
#define SPRN_PTEHI 0x3D5 /* 981 7450 PTE HI word (S/W TLB load) */
#define SPRN_PTELO 0x3D6 /* 982 7450 PTE LO word (S/W TLB load) */
#define SPRN_PURR 0x135 /* Processor Utilization of Resources Reg */
#define SPRN_PVR 0x11F /* Processor Version Register */
#define SPRN_RPA 0x3D6 /* Required Physical Address Register */
#define SPRN_SDA 0x3BF /* Sampled Data Address Register */
#define SPRN_SDR1 0x019 /* MMU Hash Base Register */
#define SPRN_ASR 0x118 /* Address Space Register */
#define SPRN_SIA 0x3BB /* Sampled Instruction Address Register */
#define SPRN_SPRG0 0x110 /* Special Purpose Register General 0 */
#define SPRN_SPRG1 0x111 /* Special Purpose Register General 1 */
#define SPRN_SPRG2 0x112 /* Special Purpose Register General 2 */
#define SPRN_SPRG3 0x113 /* Special Purpose Register General 3 */
#define SPRN_USPRG3 0x103 /* SPRG3 userspace read */
#define SPRN_SPRG4 0x114 /* Special Purpose Register General 4 */
#define SPRN_USPRG4 0x104 /* SPRG4 userspace read */
#define SPRN_SPRG5 0x115 /* Special Purpose Register General 5 */
#define SPRN_USPRG5 0x105 /* SPRG5 userspace read */
#define SPRN_SPRG6 0x116 /* Special Purpose Register General 6 */
#define SPRN_USPRG6 0x106 /* SPRG6 userspace read */
#define SPRN_SPRG7 0x117 /* Special Purpose Register General 7 */
#define SPRN_USPRG7 0x107 /* SPRG7 userspace read */
#define SPRN_SRR0 0x01A /* Save/Restore Register 0 */
#define SPRN_SRR1 0x01B /* Save/Restore Register 1 */
#ifdef CONFIG_PPC_BOOK3S
/*
* Bits loaded from MSR upon interrupt.
* PPC (64-bit) bits 33-36,42-47 are interrupt dependent, the others are
* loaded from MSR. The exception is that SRESET and MCE do not always load
* bit 62 (RI) from MSR. Don't use PPC_BITMASK for this because 32-bit uses
* it.
*/
#define SRR1_MSR_BITS (~0x783f0000UL)
#endif
#define SRR1_ISI_NOPT 0x40000000 /* ISI: Not found in hash */
#define SRR1_ISI_N_G_OR_CIP 0x10000000 /* ISI: Access is no-exec or G or CI for a prefixed instruction */
#define SRR1_ISI_PROT 0x08000000 /* ISI: Other protection fault */
#define SRR1_WAKEMASK 0x00380000 /* reason for wakeup */
#define SRR1_WAKEMASK_P8 0x003c0000 /* reason for wakeup on POWER8 and 9 */
#define SRR1_WAKEMCE_RESVD 0x003c0000 /* Unused/reserved value used by MCE wakeup to indicate cause to idle wakeup handler */
#define SRR1_WAKESYSERR 0x00300000 /* System error */
#define SRR1_WAKEEE 0x00200000 /* External interrupt */
#define SRR1_WAKEHVI 0x00240000 /* Hypervisor Virtualization Interrupt (P9) */
#define SRR1_WAKEMT 0x00280000 /* mtctrl */
#define SRR1_WAKEHMI 0x00280000 /* Hypervisor maintenance */
#define SRR1_WAKEDEC 0x00180000 /* Decrementer interrupt */
#define SRR1_WAKEDBELL 0x00140000 /* Privileged doorbell on P8 */
#define SRR1_WAKETHERM 0x00100000 /* Thermal management interrupt */
#define SRR1_WAKERESET 0x00100000 /* System reset */
#define SRR1_WAKEHDBELL 0x000c0000 /* Hypervisor doorbell on P8 */
#define SRR1_WAKESTATE 0x00030000 /* Powersave exit mask [46:47] */
#define SRR1_WS_HVLOSS 0x00030000 /* HV resources not maintained */
#define SRR1_WS_GPRLOSS 0x00020000 /* GPRs not maintained */
#define SRR1_WS_NOLOSS 0x00010000 /* All resources maintained */
#define SRR1_PROGTM 0x00200000 /* TM Bad Thing */
#define SRR1_PROGFPE 0x00100000 /* Floating Point Enabled */
#define SRR1_PROGILL 0x00080000 /* Illegal instruction */
#define SRR1_PROGPRIV 0x00040000 /* Privileged instruction */
#define SRR1_PROGTRAP 0x00020000 /* Trap */
#define SRR1_PROGADDR 0x00010000 /* SRR0 contains subsequent addr */
#define SRR1_MCE_MCP 0x00080000 /* Machine check signal caused interrupt */
#define SRR1_BOUNDARY 0x10000000 /* Prefixed instruction crosses 64-byte boundary */
#define SRR1_PREFIXED 0x20000000 /* Exception caused by prefixed instruction */
#define SPRN_HSRR0 0x13A /* Save/Restore Register 0 */
#define SPRN_HSRR1 0x13B /* Save/Restore Register 1 */
#define HSRR1_DENORM 0x00100000 /* Denorm exception */
#define HSRR1_HISI_WRITE 0x00010000 /* HISI bcs couldn't update mem */
#define SPRN_TBCTL 0x35f /* PA6T Timebase control register */
#define TBCTL_FREEZE 0x0000000000000000ull /* Freeze all tbs */
#define TBCTL_RESTART 0x0000000100000000ull /* Restart all tbs */
#define TBCTL_UPDATE_UPPER 0x0000000200000000ull /* Set upper 32 bits */
#define TBCTL_UPDATE_LOWER 0x0000000300000000ull /* Set lower 32 bits */
811
812
813
814
815
816
817
818
819
820
821
822
823
824
825
826
827
828
829
830
831
832
833
834
835
836
#ifndef SPRN_SVR
#define SPRN_SVR 0x11E /* System Version Register */
#endif
#define SPRN_THRM1 0x3FC /* Thermal Management Register 1 */
/* these bits were defined in inverted endian sense originally, ugh, confusing */
#define THRM1_TIN (1 << 31)
#define THRM1_TIV (1 << 30)
#define THRM1_THRES(x) ((x&0x7f)<<23)
#define THRM3_SITV(x) ((x&0x3fff)<<1)
#define THRM1_TID (1<<2)
#define THRM1_TIE (1<<1)
#define THRM1_V (1<<0)
#define SPRN_THRM2 0x3FD /* Thermal Management Register 2 */
#define SPRN_THRM3 0x3FE /* Thermal Management Register 3 */
#define THRM3_E (1<<0)
#define SPRN_TLBMISS 0x3D4 /* 980 7450 TLB Miss Register */
#define SPRN_UMMCR0 0x3A8 /* User Monitor Mode Control Register 0 */
#define SPRN_UMMCR1 0x3AC /* User Monitor Mode Control Register 0 */
#define SPRN_UPMC1 0x3A9 /* User Performance Counter Register 1 */
#define SPRN_UPMC2 0x3AA /* User Performance Counter Register 2 */
#define SPRN_UPMC3 0x3AD /* User Performance Counter Register 3 */
#define SPRN_UPMC4 0x3AE /* User Performance Counter Register 4 */
#define SPRN_USIA 0x3AB /* User Sampled Instruction Address Register */
#define SPRN_VRSAVE 0x100 /* Vector Register Save Register */
#define SPRN_XER 0x001 /* Fixed Point Exception Register */
#define SPRN_MMCR0_GEKKO 0x3B8 /* Gekko Monitor Mode Control Register 0 */
#define SPRN_MMCR1_GEKKO 0x3BC /* Gekko Monitor Mode Control Register 1 */
#define SPRN_PMC1_GEKKO 0x3B9 /* Gekko Performance Monitor Control 1 */
#define SPRN_PMC2_GEKKO 0x3BA /* Gekko Performance Monitor Control 2 */
#define SPRN_PMC3_GEKKO 0x3BD /* Gekko Performance Monitor Control 3 */
#define SPRN_PMC4_GEKKO 0x3BE /* Gekko Performance Monitor Control 4 */
#define SPRN_WPAR_GEKKO 0x399 /* Gekko Write Pipe Address Register */
#define SPRN_SCOMC 0x114 /* SCOM Access Control */
#define SPRN_SCOMD 0x115 /* SCOM Access DATA */
/* Performance monitor SPRs */
#ifdef CONFIG_PPC64
#define SPRN_MMCR0 795
#define MMCR0_FC 0x80000000UL /* freeze counters */
#define MMCR0_FCS 0x40000000UL /* freeze in supervisor state */
#define MMCR0_KERNEL_DISABLE MMCR0_FCS
#define MMCR0_FCP 0x20000000UL /* freeze in problem state */
#define MMCR0_PROBLEM_DISABLE MMCR0_FCP
#define MMCR0_FCM1 0x10000000UL /* freeze counters while MSR mark = 1 */
#define MMCR0_FCM0 0x08000000UL /* freeze counters while MSR mark = 0 */
#define MMCR0_PMXE ASM_CONST(0x04000000) /* perf mon exception enable */
#define MMCR0_FCECE ASM_CONST(0x02000000) /* freeze ctrs on enabled cond or event */
#define MMCR0_TBEE 0x00400000UL /* time base exception enable */
#define MMCR0_BHRBA 0x00200000UL /* BHRB Access allowed in userspace */
#define MMCR0_EBE 0x00100000UL /* Event based branch enable */
#define MMCR0_PMCC 0x000c0000UL /* PMC control */
#define MMCR0_PMCC_U6 0x00080000UL /* PMC1-6 are R/W by user (PR) */
#define MMCR0_PMC1CE 0x00008000UL /* PMC1 count enable*/
#define MMCR0_PMCjCE ASM_CONST(0x00004000) /* PMCj count enable*/
#define MMCR0_TRIGGER 0x00002000UL /* TRIGGER enable */
#define MMCR0_PMAO_SYNC ASM_CONST(0x00000800) /* PMU intr is synchronous */
#define MMCR0_C56RUN ASM_CONST(0x00000100) /* PMC5/6 count when RUN=0 */
/* performance monitor alert has occurred, set to 0 after handling exception */
#define MMCR0_PMAO ASM_CONST(0x00000080)
#define MMCR0_SHRFC 0x00000040UL /* SHRre freeze conditions between threads */
#define MMCR0_FC56 0x00000010UL /* freeze counters 5 and 6 */
#define MMCR0_FCTI 0x00000008UL /* freeze counters in tags inactive mode */
#define MMCR0_FCTA 0x00000004UL /* freeze counters in tags active mode */
#define MMCR0_FCWAIT 0x00000002UL /* freeze counter in WAIT state */
#define MMCR0_FCHV 0x00000001UL /* freeze conditions in hypervisor mode */
#define SPRN_MMCR1 798
#define SPRN_MMCR3 754
#define SPRN_UMMCR2 769
#define SPRN_UMMCR3 738
Paul Mackerras
committed
#define MMCRA_SDSYNC 0x80000000UL /* SDAR synced with SIAR */
#define MMCRA_SDAR_DCACHE_MISS 0x40000000UL
#define MMCRA_SDAR_ERAT_MISS 0x20000000UL
#define MMCRA_SIHV 0x10000000UL /* state of MSR HV when SIAR set */
#define MMCRA_SIPR 0x08000000UL /* state of MSR PR when SIAR set */
#define MMCRA_SLOT 0x07000000UL /* SLOT bits (37-39) */
#define MMCRA_SLOT_SHIFT 24
#define MMCRA_SAMPLE_ENABLE 0x00000001UL /* enable sampling */
#define MMCRA_BHRB_DISABLE _UL(0x2000000000) // BHRB disable bit for ISA v3.1
Paul Mackerras
committed
#define POWER6_MMCRA_SDSYNC 0x0000080000000000ULL /* SDAR/SIAR synced */
#define POWER6_MMCRA_SIHV 0x0000040000000000ULL
#define POWER6_MMCRA_SIPR 0x0000020000000000ULL
#define POWER6_MMCRA_THRM 0x00000020UL
#define POWER6_MMCRA_OTHER 0x0000000EUL
#define POWER7P_MMCRA_SIAR_VALID 0x10000000 /* P7+ SIAR contents valid */
#define POWER7P_MMCRA_SDAR_VALID 0x08000000 /* P7+ SDAR contents valid */
#define SPRN_MMCRH 316 /* Hypervisor monitor mode control register */
#define SPRN_MMCRS 894 /* Supervisor monitor mode control register */
#define SPRN_MMCRC 851 /* Core monitor mode control register */
#define SPRN_EBBHR 804 /* Event based branch handler register */
#define SPRN_EBBRR 805 /* Event based branch return register */
#define SPRN_BESCR 806 /* Branch event status and control register */
#define BESCR_GE 0x8000000000000000ULL /* Global Enable */
#define SPRN_WORT 895 /* Workload optimization register - thread */
#define SPRN_WORC 863 /* Workload optimization register - core */
#define SPRN_PMC1 787
#define SPRN_PMC2 788
#define SPRN_PMC3 789
#define SPRN_PMC4 790
#define SPRN_PMC5 791
#define SPRN_PMC6 792
#define SPRN_PMC7 793
#define SPRN_PMC8 794
#define SPRN_SIER 784
#define SIER_SIPR 0x2000000 /* Sampled MSR_PR */
#define SIER_SIHV 0x1000000 /* Sampled MSR_HV */
#define SIER_SIAR_VALID 0x0400000 /* SIAR contents valid */
#define SIER_SDAR_VALID 0x0200000 /* SDAR contents valid */
#define SPRN_SIER2 752
#define SPRN_SIER3 753
#define SPRN_USIER2 736
#define SPRN_USIER3 737
#define SPRN_SIAR 796
#define SPRN_SDAR 797
#define SPRN_TACR 888
#define SPRN_TCSCR 889
#define SPRN_CSIGR 890
#define SPRN_SPMC1 892
#define SPRN_SPMC2 893
/* When EBB is enabled, some of MMCR0/MMCR2/SIER are user accessible */
#define MMCR0_USER_MASK (MMCR0_FC | MMCR0_PMXE | MMCR0_PMAO)
#define MMCR2_USER_MASK 0x4020100804020000UL /* (FC1P|FC2P|FC3P|FC4P|FC5P|FC6P) */
#define SIER_USER_MASK 0x7fffffUL
942
943
944
945
946
947
948
949
950
951
952
953
954
955
956
957
958
959
960
961
962
963
964
965
966
967
968
969
970
971
972
973
974
975
976
977
978
979
980
981
982
983
984
985
986
987
988
#define SPRN_PA6T_MMCR0 795
#define PA6T_MMCR0_EN0 0x0000000000000001UL
#define PA6T_MMCR0_EN1 0x0000000000000002UL
#define PA6T_MMCR0_EN2 0x0000000000000004UL
#define PA6T_MMCR0_EN3 0x0000000000000008UL
#define PA6T_MMCR0_EN4 0x0000000000000010UL
#define PA6T_MMCR0_EN5 0x0000000000000020UL
#define PA6T_MMCR0_SUPEN 0x0000000000000040UL
#define PA6T_MMCR0_PREN 0x0000000000000080UL
#define PA6T_MMCR0_HYPEN 0x0000000000000100UL
#define PA6T_MMCR0_FCM0 0x0000000000000200UL
#define PA6T_MMCR0_FCM1 0x0000000000000400UL
#define PA6T_MMCR0_INTGEN 0x0000000000000800UL
#define PA6T_MMCR0_INTEN0 0x0000000000001000UL
#define PA6T_MMCR0_INTEN1 0x0000000000002000UL
#define PA6T_MMCR0_INTEN2 0x0000000000004000UL
#define PA6T_MMCR0_INTEN3 0x0000000000008000UL
#define PA6T_MMCR0_INTEN4 0x0000000000010000UL
#define PA6T_MMCR0_INTEN5 0x0000000000020000UL
#define PA6T_MMCR0_DISCNT 0x0000000000040000UL
#define PA6T_MMCR0_UOP 0x0000000000080000UL
#define PA6T_MMCR0_TRG 0x0000000000100000UL
#define PA6T_MMCR0_TRGEN 0x0000000000200000UL
#define PA6T_MMCR0_TRGREG 0x0000000001600000UL
#define PA6T_MMCR0_SIARLOG 0x0000000002000000UL
#define PA6T_MMCR0_SDARLOG 0x0000000004000000UL
#define PA6T_MMCR0_PROEN 0x0000000008000000UL
#define PA6T_MMCR0_PROLOG 0x0000000010000000UL
#define PA6T_MMCR0_DAMEN2 0x0000000020000000UL
#define PA6T_MMCR0_DAMEN3 0x0000000040000000UL
#define PA6T_MMCR0_DAMEN4 0x0000000080000000UL
#define PA6T_MMCR0_DAMEN5 0x0000000100000000UL
#define PA6T_MMCR0_DAMSEL2 0x0000000200000000UL
#define PA6T_MMCR0_DAMSEL3 0x0000000400000000UL
#define PA6T_MMCR0_DAMSEL4 0x0000000800000000UL
#define PA6T_MMCR0_DAMSEL5 0x0000001000000000UL
#define PA6T_MMCR0_HANDDIS 0x0000002000000000UL
#define PA6T_MMCR0_PCTEN 0x0000004000000000UL
#define PA6T_MMCR0_SOCEN 0x0000008000000000UL
#define PA6T_MMCR0_SOCMOD 0x0000010000000000UL
#define SPRN_PA6T_MMCR1 798
#define PA6T_MMCR1_ES2 0x00000000000000ffUL
#define PA6T_MMCR1_ES3 0x000000000000ff00UL
#define PA6T_MMCR1_ES4 0x0000000000ff0000UL
#define PA6T_MMCR1_ES5 0x00000000ff000000UL
#define SPRN_PA6T_UPMC0 771 /* User PerfMon Counter 0 */
#define SPRN_PA6T_UPMC1 772 /* ... */
#define SPRN_PA6T_UPMC2 773
#define SPRN_PA6T_UPMC3 774
#define SPRN_PA6T_UPMC4 775
#define SPRN_PA6T_UPMC5 776
#define SPRN_PA6T_UMMCR0 779 /* User Monitor Mode Control Register 0 */
#define SPRN_PA6T_SIAR 780 /* Sampled Instruction Address */
#define SPRN_PA6T_UMMCR1 782 /* User Monitor Mode Control Register 1 */
#define SPRN_PA6T_SIER 785 /* Sampled Instruction Event Register */
#define SPRN_PA6T_PMC0 787
#define SPRN_PA6T_PMC1 788