ftdi_sio.c

	unsigned short latency = 0;
	int rv = 0;
	
	udev = to_usb_device(dev);
	
	dbg("%s",__FUNCTION__);
	
	rv = usb_control_msg(udev,
			     usb_rcvctrlpipe(udev, 0),
			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST,
			     FTDI_SIO_GET_LATENCY_TIMER_REQUEST_TYPE,
			     0, priv->interface, 
			     (char*) &latency, 1, WDR_TIMEOUT);
	
	if (rv < 0) {
		dev_err(dev, "Unable to read latency timer: %i", rv);
		return -EIO;
	}
	return sprintf(buf, "%i\n", latency);
}

/* Write a new value of the latency timer, in units of milliseconds. */
static ssize_t store_latency_timer(struct device *dev, struct device_attribute *attr, const char *valbuf,
				   size_t count)
{
	struct usb_serial_port *port = to_usb_serial_port(dev);
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct usb_device *udev;
	char buf[1];
	int v = simple_strtoul(valbuf, NULL, 10);
	int rv = 0;
	
	udev = to_usb_device(dev);
	
	dbg("%s: setting latency timer = %i", __FUNCTION__, v);
	
	rv = usb_control_msg(udev,
			     usb_sndctrlpipe(udev, 0),
			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST,
			     FTDI_SIO_SET_LATENCY_TIMER_REQUEST_TYPE,
			     v, priv->interface, 
			     buf, 0, WDR_TIMEOUT);
	
	if (rv < 0) {
		dev_err(dev, "Unable to write latency timer: %i", rv);
		return -EIO;
	}
	
	return count;
}

/* Write an event character directly to the FTDI register.  The ASCII
   value is in the low 8 bits, with the enable bit in the 9th bit. */
static ssize_t store_event_char(struct device *dev, struct device_attribute *attr, const char *valbuf,
				size_t count)
{
	struct usb_serial_port *port = to_usb_serial_port(dev);
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct usb_device *udev;
	char buf[1];
	int v = simple_strtoul(valbuf, NULL, 10);
	int rv = 0;
	
	udev = to_usb_device(dev);
	
	dbg("%s: setting event char = %i", __FUNCTION__, v);
	
	rv = usb_control_msg(udev,
			     usb_sndctrlpipe(udev, 0),
			     FTDI_SIO_SET_EVENT_CHAR_REQUEST,
			     FTDI_SIO_SET_EVENT_CHAR_REQUEST_TYPE,
			     v, priv->interface, 
			     buf, 0, WDR_TIMEOUT);
	
	if (rv < 0) {
		dbg("Unable to write event character: %i", rv);
		return -EIO;
	}
	
	return count;
}

static DEVICE_ATTR(latency_timer, S_IWUSR | S_IRUGO, show_latency_timer, store_latency_timer);
static DEVICE_ATTR(event_char, S_IWUSR, NULL, store_event_char);

static void create_sysfs_attrs(struct usb_serial *serial)
{	
	struct ftdi_private *priv;
	struct usb_device *udev;

	dbg("%s",__FUNCTION__);
	
	priv = usb_get_serial_port_data(serial->port[0]);
	udev = serial->dev;
	
	/* XXX I've no idea if the original SIO supports the event_char
	 * sysfs parameter, so I'm playing it safe.  */
	if (priv->chip_type != SIO) {
		dbg("sysfs attributes for %s", ftdi_chip_name[priv->chip_type]);
		device_create_file(&udev->dev, &dev_attr_event_char);
		if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
			device_create_file(&udev->dev, &dev_attr_latency_timer);
		}
	}
}

static void remove_sysfs_attrs(struct usb_serial *serial)
{
	struct ftdi_private *priv;
	struct usb_device *udev;

	dbg("%s",__FUNCTION__);	

	priv = usb_get_serial_port_data(serial->port[0]);
	udev = serial->dev;
	
	/* XXX see create_sysfs_attrs */
	if (priv->chip_type != SIO) {
		device_remove_file(&udev->dev, &dev_attr_event_char);
		if (priv->chip_type == FT232BM || priv->chip_type == FT2232C) {
			device_remove_file(&udev->dev, &dev_attr_latency_timer);
		}
	}
	
}

/*
 * ***************************************************************************
 * FTDI driver specific functions
 * ***************************************************************************
 */

/* Probe function to check for special devices */
static int ftdi_sio_probe (struct usb_serial *serial, const struct usb_device_id *id)
{
	usb_set_serial_data(serial, (void *)id->driver_info);

	return (0);
}

/* attach subroutine */
static int ftdi_sio_attach (struct usb_serial *serial)
{
	struct usb_serial_port *port = serial->port[0];
	struct ftdi_private *priv;
	struct ftdi_sio_quirk *quirk;
	
	dbg("%s",__FUNCTION__);

	priv = kzalloc(sizeof(struct ftdi_private), GFP_KERNEL);
	if (!priv){
		err("%s- kmalloc(%Zd) failed.", __FUNCTION__, sizeof(struct ftdi_private));
		return -ENOMEM;
	}

	spin_lock_init(&priv->rx_lock);
        init_waitqueue_head(&priv->delta_msr_wait);
	/* This will push the characters through immediately rather
	   than queue a task to deliver them */
	priv->flags = ASYNC_LOW_LATENCY;

	/* Increase the size of read buffers */
	kfree(port->bulk_in_buffer);
	port->bulk_in_buffer = kmalloc (BUFSZ, GFP_KERNEL);
	if (!port->bulk_in_buffer) {
		kfree (priv);
		return -ENOMEM;
	}
	if (port->read_urb) {
		port->read_urb->transfer_buffer = port->bulk_in_buffer;
		port->read_urb->transfer_buffer_length = BUFSZ;
	}

	INIT_WORK(&priv->rx_work, ftdi_process_read, port);

	/* Free port's existing write urb and transfer buffer. */
	if (port->write_urb) {
		usb_free_urb (port->write_urb);
		port->write_urb = NULL;
	}
	kfree(port->bulk_out_buffer);
	port->bulk_out_buffer = NULL;

	usb_set_serial_port_data(serial->port[0], priv);

	ftdi_determine_type (serial->port[0]);
	create_sysfs_attrs(serial);

	/* Check for device requiring special set up. */
	quirk = (struct ftdi_sio_quirk *)usb_get_serial_data(serial);
	if (quirk && quirk->setup) {
		quirk->setup(serial);
	}
	
	return (0);
} /* ftdi_sio_attach */


/* Setup for the USB-UIRT device, which requires hardwired
 * baudrate (38400 gets mapped to 312500) */
/* Called from usbserial:serial_probe */
static void ftdi_USB_UIRT_setup (struct usb_serial *serial)
{
	struct ftdi_private *priv;

	dbg("%s",__FUNCTION__);

	priv = usb_get_serial_port_data(serial->port[0]);
	priv->flags |= ASYNC_SPD_CUST;
	priv->custom_divisor = 77;
	priv->force_baud = B38400;
} /* ftdi_USB_UIRT_setup */

/* Setup for the HE-TIRA1 device, which requires hardwired
 * baudrate (38400 gets mapped to 100000) and RTS-CTS enabled.  */
static void ftdi_HE_TIRA1_setup (struct usb_serial *serial)
{
	struct ftdi_private *priv;

	dbg("%s",__FUNCTION__);

	priv = usb_get_serial_port_data(serial->port[0]);
	priv->flags |= ASYNC_SPD_CUST;
	priv->custom_divisor = 240;
	priv->force_baud = B38400;
	priv->force_rtscts = 1;
} /* ftdi_HE_TIRA1_setup */


/* ftdi_shutdown is called from usbserial:usb_serial_disconnect 
 *   it is called when the usb device is disconnected
 *
 *   usbserial:usb_serial_disconnect
 *      calls __serial_close for each open of the port
 *      shutdown is called then (ie ftdi_shutdown)
 */


static void ftdi_shutdown (struct usb_serial *serial)
{ /* ftdi_shutdown */
	
	struct usb_serial_port *port = serial->port[0];
	struct ftdi_private *priv = usb_get_serial_port_data(port);

	dbg("%s", __FUNCTION__);

	remove_sysfs_attrs(serial);
	
	/* all open ports are closed at this point 
         *    (by usbserial.c:__serial_close, which calls ftdi_close)  
	 */

	if (priv) {
		usb_set_serial_port_data(port, NULL);
		kfree(priv);
	}
} /* ftdi_shutdown */


static int  ftdi_open (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_open */
	struct termios tmp_termios;
	struct usb_device *dev = port->serial->dev;
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	unsigned long flags;
	
	int result = 0;
	char buf[1]; /* Needed for the usb_control_msg I think */

	dbg("%s", __FUNCTION__);


	port->tty->low_latency = (priv->flags & ASYNC_LOW_LATENCY) ? 1 : 0;

	/* No error checking for this (will get errors later anyway) */
	/* See ftdi_sio.h for description of what is reset */
	usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
			FTDI_SIO_RESET_REQUEST, FTDI_SIO_RESET_REQUEST_TYPE, 
			FTDI_SIO_RESET_SIO, 
			priv->interface, buf, 0, WDR_TIMEOUT);

	/* Termios defaults are set by usb_serial_init. We don't change
	   port->tty->termios - this would loose speed settings, etc.
	   This is same behaviour as serial.c/rs_open() - Kuba */

	/* ftdi_set_termios  will send usb control messages */
	ftdi_set_termios(port, &tmp_termios);

	/* FIXME: Flow control might be enabled, so it should be checked -
	   we have no control of defaults! */
	/* Turn on RTS and DTR since we are not flow controlling by default */
	set_mctrl(port, TIOCM_DTR | TIOCM_RTS);

	/* Not throttled */
	spin_lock_irqsave(&priv->rx_lock, flags);
	priv->rx_flags &= ~(THROTTLED | ACTUALLY_THROTTLED);
	spin_unlock_irqrestore(&priv->rx_lock, flags);

	/* Start reading from the device */
	priv->rx_processed = 0;
	usb_fill_bulk_urb(port->read_urb, dev,
		      usb_rcvbulkpipe(dev, port->bulk_in_endpointAddress),
		      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
		      ftdi_read_bulk_callback, port);
	result = usb_submit_urb(port->read_urb, GFP_KERNEL);
	if (result)
		err("%s - failed submitting read urb, error %d", __FUNCTION__, result);


	return result;
} /* ftdi_open */



/* 
 * usbserial:__serial_close  only calls ftdi_close if the point is open
 *
 *   This only gets called when it is the last close
 *   
 *   
 */

static void ftdi_close (struct usb_serial_port *port, struct file *filp)
{ /* ftdi_close */
	unsigned int c_cflag = port->tty->termios->c_cflag;
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	char buf[1];

	dbg("%s", __FUNCTION__);

	if (c_cflag & HUPCL){
		/* Disable flow control */
		if (usb_control_msg(port->serial->dev, 
				    usb_sndctrlpipe(port->serial->dev, 0),
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
				    0, priv->interface, buf, 0,
				    WDR_TIMEOUT) < 0) {
			err("error from flowcontrol urb");
		}	    

		/* drop RTS and DTR */
		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
	} /* Note change no line if hupcl is off */

	/* cancel any scheduled reading */
	cancel_delayed_work(&priv->rx_work);
	flush_scheduled_work();
	
	/* shutdown our bulk read */
	if (port->read_urb)
		usb_kill_urb(port->read_urb);
} /* ftdi_close */


  
/* The SIO requires the first byte to have:
 *  B0 1
 *  B1 0
 *  B2..7 length of message excluding byte 0
 *
 * The new devices do not require this byte
 */
static int ftdi_write (struct usb_serial_port *port,
			   const unsigned char *buf, int count)
{ /* ftdi_write */
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	struct urb *urb;
	unsigned char *buffer;
	int data_offset ;       /* will be 1 for the SIO and 0 otherwise */
	int status;
	int transfer_size;

	dbg("%s port %d, %d bytes", __FUNCTION__, port->number, count);

	if (count == 0) {
		dbg("write request of 0 bytes");
		return 0;
	}
	
	data_offset = priv->write_offset;
        dbg("data_offset set to %d",data_offset);

	/* Determine total transfer size */
	transfer_size = count;
	if (data_offset > 0) {
		/* Original sio needs control bytes too... */
		transfer_size += (data_offset *
				((count + (PKTSZ - 1 - data_offset)) /
				 (PKTSZ - data_offset)));
	}

	buffer = kmalloc (transfer_size, GFP_ATOMIC);
	if (!buffer) {
		err("%s ran out of kernel memory for urb ...", __FUNCTION__);
		return -ENOMEM;
	}

	urb = usb_alloc_urb(0, GFP_ATOMIC);
	if (!urb) {
		err("%s - no more free urbs", __FUNCTION__);
		kfree (buffer);
		return -ENOMEM;
	}

	/* Copy data */
	if (data_offset > 0) {
		/* Original sio requires control byte at start of each packet. */
		int user_pktsz = PKTSZ - data_offset;
		int todo = count;
		unsigned char *first_byte = buffer;
		const unsigned char *current_position = buf;

		while (todo > 0) {
			if (user_pktsz > todo) {
				user_pktsz = todo;
			}
			/* Write the control byte at the front of the packet*/
			*first_byte = 1 | ((user_pktsz) << 2); 
			/* Copy data for packet */
			memcpy (first_byte + data_offset,
				current_position, user_pktsz);
			first_byte += user_pktsz + data_offset;
			current_position += user_pktsz;
			todo -= user_pktsz;
		}
	} else {
		/* No control byte required. */
		/* Copy in the data to send */
		memcpy (buffer, buf, count);
	}

	usb_serial_debug_data(debug, &port->dev, __FUNCTION__, transfer_size, buffer);

	/* fill the buffer and send it */
	usb_fill_bulk_urb(urb, port->serial->dev, 
		      usb_sndbulkpipe(port->serial->dev, port->bulk_out_endpointAddress),
		      buffer, transfer_size,
		      ftdi_write_bulk_callback, port);

	status = usb_submit_urb(urb, GFP_ATOMIC);
	if (status) {
		err("%s - failed submitting write urb, error %d", __FUNCTION__, status);
		count = status;
		kfree (buffer);
	}

	/* we are done with this urb, so let the host driver
	 * really free it when it is finished with it */
	usb_free_urb (urb);

	dbg("%s write returning: %d", __FUNCTION__, count);
	return count;
} /* ftdi_write */


/* This function may get called when the device is closed */

static void ftdi_write_bulk_callback (struct urb *urb, struct pt_regs *regs)
{
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;

	/* free up the transfer buffer, as usb_free_urb() does not do this */
	kfree (urb->transfer_buffer);

	dbg("%s - port %d", __FUNCTION__, port->number);
	
	if (urb->status) {
		dbg("nonzero write bulk status received: %d", urb->status);
		return;
	}

	schedule_work(&port->work);
} /* ftdi_write_bulk_callback */


static int ftdi_write_room( struct usb_serial_port *port )
{
	dbg("%s - port %d", __FUNCTION__, port->number);

	/*
	 * We really can take anything the user throws at us
	 * but let's pick a nice big number to tell the tty
	 * layer that we have lots of free space
	 */
	return 2048;
} /* ftdi_write_room */


static int ftdi_chars_in_buffer (struct usb_serial_port *port)
{ /* ftdi_chars_in_buffer */
	dbg("%s - port %d", __FUNCTION__, port->number);

	/* 
	 * We can't really account for how much data we
	 * have sent out, but hasn't made it through to the
	 * device, so just tell the tty layer that everything
	 * is flushed.
	 */
	return 0;
} /* ftdi_chars_in_buffer */



static void ftdi_read_bulk_callback (struct urb *urb, struct pt_regs *regs)
{ /* ftdi_read_bulk_callback */
	struct usb_serial_port *port = (struct usb_serial_port *)urb->context;
	struct tty_struct *tty;
	struct ftdi_private *priv;

	if (urb->number_of_packets > 0) {
		err("%s transfer_buffer_length %d actual_length %d number of packets %d",__FUNCTION__,
		    urb->transfer_buffer_length, urb->actual_length, urb->number_of_packets );
		err("%s transfer_flags %x ", __FUNCTION__,urb->transfer_flags );
	}

	dbg("%s - port %d", __FUNCTION__, port->number);

	if (port->open_count <= 0)
		return;

	tty = port->tty;
	if (!tty) {
		dbg("%s - bad tty pointer - exiting",__FUNCTION__);
		return;
	}

	priv = usb_get_serial_port_data(port);
	if (!priv) {
		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
		return;
	}

	if (urb != port->read_urb) {
		err("%s - Not my urb!", __FUNCTION__);
	}

	if (urb->status) {
		/* This will happen at close every time so it is a dbg not an err */
		dbg("(this is ok on close) nonzero read bulk status received: %d", urb->status);
		return;
	}

	ftdi_process_read(port);

} /* ftdi_read_bulk_callback */


static void ftdi_process_read (void *param)
{ /* ftdi_process_read */
	struct usb_serial_port *port = (struct usb_serial_port*)param;
	struct urb *urb;
	struct tty_struct *tty;
	struct ftdi_private *priv;
	char error_flag;
       	unsigned char *data;

	int i;
	int result;
	int need_flip;
	int packet_offset;
	unsigned long flags;

	dbg("%s - port %d", __FUNCTION__, port->number);

	if (port->open_count <= 0)
		return;

	tty = port->tty;
	if (!tty) {
		dbg("%s - bad tty pointer - exiting",__FUNCTION__);
		return;
	}

	priv = usb_get_serial_port_data(port);
	if (!priv) {
		dbg("%s - bad port private data pointer - exiting", __FUNCTION__);
		return;
	}

	urb = port->read_urb;
	if (!urb) {
		dbg("%s - bad read_urb pointer - exiting", __FUNCTION__);
		return;
	}

	data = urb->transfer_buffer;

	if (priv->rx_processed) {
		dbg("%s - already processed: %d bytes, %d remain", __FUNCTION__,
				priv->rx_processed,
				urb->actual_length - priv->rx_processed);
	} else {
		/* The first two bytes of every read packet are status */
		if (urb->actual_length > 2) {
			usb_serial_debug_data(debug, &port->dev, __FUNCTION__, urb->actual_length, data);
		} else {
			dbg("Status only: %03oo %03oo",data[0],data[1]);
		}
	}


	/* TO DO -- check for hung up line and handle appropriately: */
	/*   send hangup  */
	/* See acm.c - you do a tty_hangup  - eg tty_hangup(tty) */
	/* if CD is dropped and the line is not CLOCAL then we should hangup */

	need_flip = 0;
	for (packet_offset = priv->rx_processed; packet_offset < urb->actual_length; packet_offset += PKTSZ) {
		int length;

		/* Compare new line status to the old one, signal if different */
		/* N.B. packet may be processed more than once, but differences
		 * are only processed once.  */
		if (priv != NULL) {
			char new_status = data[packet_offset+0] & FTDI_STATUS_B0_MASK;
			if (new_status != priv->prev_status) {
				priv->diff_status |= new_status ^ priv->prev_status;
				wake_up_interruptible(&priv->delta_msr_wait);
				priv->prev_status = new_status;
			}
		}

		length = min(PKTSZ, urb->actual_length-packet_offset)-2;
		if (length < 0) {
			err("%s - bad packet length: %d", __FUNCTION__, length+2);
			length = 0;
		}

		if (priv->rx_flags & THROTTLED) {
			dbg("%s - throttled", __FUNCTION__);
			break;
		}
		if (tty_buffer_request_room(tty, length) < length) {
			/* break out & wait for throttling/unthrottling to happen */
			dbg("%s - receive room low", __FUNCTION__);
			break;
		}

		/* Handle errors and break */
		error_flag = TTY_NORMAL;
		/* Although the device uses a bitmask and hence can have multiple */
		/* errors on a packet - the order here sets the priority the */
		/* error is returned to the tty layer  */

		if ( data[packet_offset+1] & FTDI_RS_OE ) {
			error_flag = TTY_OVERRUN;
			dbg("OVERRRUN error");
		}
		if ( data[packet_offset+1] & FTDI_RS_BI ) {
			error_flag = TTY_BREAK;
			dbg("BREAK received");
		}
		if ( data[packet_offset+1] & FTDI_RS_PE ) {
			error_flag = TTY_PARITY;
			dbg("PARITY error");
		}
		if ( data[packet_offset+1] & FTDI_RS_FE ) {
			error_flag = TTY_FRAME;
			dbg("FRAMING error");
		}
		if (length > 0) {
			for (i = 2; i < length+2; i++) {
				/* Note that the error flag is duplicated for 
				   every character received since we don't know
				   which character it applied to */
				tty_insert_flip_char(tty, data[packet_offset+i], error_flag);
			}
			need_flip = 1;
		}

#ifdef NOT_CORRECT_BUT_KEEPING_IT_FOR_NOW
		/* if a parity error is detected you get status packets forever
		   until a character is sent without a parity error.
		   This doesn't work well since the application receives a never
		   ending stream of bad data - even though new data hasn't been sent.
		   Therefore I (bill) have taken this out.
		   However - this might make sense for framing errors and so on 
		   so I am leaving the code in for now.
		*/
		else {
			if (error_flag != TTY_NORMAL){
				dbg("error_flag is not normal");
				/* In this case it is just status - if that is an error send a bad character */
				if(tty->flip.count >= TTY_FLIPBUF_SIZE) {
					tty_flip_buffer_push(tty);
				}
				tty_insert_flip_char(tty, 0xff, error_flag);
				need_flip = 1;
			}
		}
#endif
	} /* "for(packet_offset=0..." */

	/* Low latency */
	if (need_flip) {
		tty_flip_buffer_push(tty);
	}

	if (packet_offset < urb->actual_length) {
		/* not completely processed - record progress */
		priv->rx_processed = packet_offset;
		dbg("%s - incomplete, %d bytes processed, %d remain",
				__FUNCTION__, packet_offset,
				urb->actual_length - packet_offset);
		/* check if we were throttled while processing */
		spin_lock_irqsave(&priv->rx_lock, flags);
		if (priv->rx_flags & THROTTLED) {
			priv->rx_flags |= ACTUALLY_THROTTLED;
			spin_unlock_irqrestore(&priv->rx_lock, flags);
			dbg("%s - deferring remainder until unthrottled",
					__FUNCTION__);
			return;
		}
		spin_unlock_irqrestore(&priv->rx_lock, flags);
		/* if the port is closed stop trying to read */
		if (port->open_count > 0){
			/* delay processing of remainder */
			schedule_delayed_work(&priv->rx_work, 1);
		} else {
			dbg("%s - port is closed", __FUNCTION__);
		}
		return;
	}

	/* urb is completely processed */
	priv->rx_processed = 0;

	/* if the port is closed stop trying to read */
	if (port->open_count > 0){
		/* Continue trying to always read  */
		usb_fill_bulk_urb(port->read_urb, port->serial->dev, 
			      usb_rcvbulkpipe(port->serial->dev, port->bulk_in_endpointAddress),
			      port->read_urb->transfer_buffer, port->read_urb->transfer_buffer_length,
			      ftdi_read_bulk_callback, port);

		result = usb_submit_urb(port->read_urb, GFP_ATOMIC);
		if (result)
			err("%s - failed resubmitting read urb, error %d", __FUNCTION__, result);
	}

	return;
} /* ftdi_process_read */


static void ftdi_break_ctl( struct usb_serial_port *port, int break_state )
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	__u16 urb_value = 0; 
	char buf[1];
	
	/* break_state = -1 to turn on break, and 0 to turn off break */
	/* see drivers/char/tty_io.c to see it used */
	/* last_set_data_urb_value NEVER has the break bit set in it */

	if (break_state) {
		urb_value = priv->last_set_data_urb_value | FTDI_SIO_SET_BREAK;
	} else {
		urb_value = priv->last_set_data_urb_value; 
	}

	
	if (usb_control_msg(port->serial->dev, usb_sndctrlpipe(port->serial->dev, 0),
			    FTDI_SIO_SET_DATA_REQUEST, 
			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
			    urb_value , priv->interface,
			    buf, 0, WDR_TIMEOUT) < 0) {
		err("%s FAILED to enable/disable break state (state was %d)", __FUNCTION__,break_state);
	}	   

	dbg("%s break state is %d - urb is %d", __FUNCTION__,break_state, urb_value);
	
}


/* old_termios contains the original termios settings and tty->termios contains
 * the new setting to be used
 * WARNING: set_termios calls this with old_termios in kernel space
 */

static void ftdi_set_termios (struct usb_serial_port *port, struct termios *old_termios)
{ /* ftdi_termios */
	struct usb_device *dev = port->serial->dev;
	unsigned int cflag = port->tty->termios->c_cflag;
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	__u16 urb_value; /* will hold the new flags */
	char buf[1]; /* Perhaps I should dynamically alloc this? */
	
	// Added for xon/xoff support
	unsigned int iflag = port->tty->termios->c_iflag;
	unsigned char vstop;
	unsigned char vstart;
	
	dbg("%s", __FUNCTION__);

	/* Force baud rate if this device requires it, unless it is set to B0. */
	if (priv->force_baud && ((port->tty->termios->c_cflag & CBAUD) != B0)) {
		dbg("%s: forcing baud rate for this device", __FUNCTION__);
		port->tty->termios->c_cflag &= ~CBAUD;
		port->tty->termios->c_cflag |= priv->force_baud;
	}

	/* Force RTS-CTS if this device requires it. */
	if (priv->force_rtscts) {
		dbg("%s: forcing rtscts for this device", __FUNCTION__);
		port->tty->termios->c_cflag |= CRTSCTS;
	}

	cflag = port->tty->termios->c_cflag;

	/* FIXME -For this cut I don't care if the line is really changing or 
	   not  - so just do the change regardless  - should be able to 
	   compare old_termios and tty->termios */
	/* NOTE These routines can get interrupted by 
	   ftdi_sio_read_bulk_callback  - need to examine what this 
           means - don't see any problems yet */
	
	/* Set number of data bits, parity, stop bits */
	
	urb_value = 0;
	urb_value |= (cflag & CSTOPB ? FTDI_SIO_SET_DATA_STOP_BITS_2 :
		      FTDI_SIO_SET_DATA_STOP_BITS_1);
	urb_value |= (cflag & PARENB ? 
		      (cflag & PARODD ? FTDI_SIO_SET_DATA_PARITY_ODD : 
		       FTDI_SIO_SET_DATA_PARITY_EVEN) :
		      FTDI_SIO_SET_DATA_PARITY_NONE);
	if (cflag & CSIZE) {
		switch (cflag & CSIZE) {
		case CS5: urb_value |= 5; dbg("Setting CS5"); break;
		case CS6: urb_value |= 6; dbg("Setting CS6"); break;
		case CS7: urb_value |= 7; dbg("Setting CS7"); break;
		case CS8: urb_value |= 8; dbg("Setting CS8"); break;
		default:
			err("CSIZE was set but not CS5-CS8");
		}
	}

	/* This is needed by the break command since it uses the same command - but is
	 *  or'ed with this value  */
	priv->last_set_data_urb_value = urb_value;
	
	if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
			    FTDI_SIO_SET_DATA_REQUEST, 
			    FTDI_SIO_SET_DATA_REQUEST_TYPE,
			    urb_value , priv->interface,
			    buf, 0, WDR_SHORT_TIMEOUT) < 0) {
		err("%s FAILED to set databits/stopbits/parity", __FUNCTION__);
	}	   

	/* Now do the baudrate */
	if ((cflag & CBAUD) == B0 ) {
		/* Disable flow control */
		if (usb_control_msg(dev, usb_sndctrlpipe(dev, 0),
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST, 
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
				    0, priv->interface, 
				    buf, 0, WDR_TIMEOUT) < 0) {
			err("%s error from disable flowcontrol urb", __FUNCTION__);
		}	    
		/* Drop RTS and DTR */
		clear_mctrl(port, TIOCM_DTR | TIOCM_RTS);
	} else {
		/* set the baudrate determined before */
		if (change_speed(port)) {
			err("%s urb failed to set baudrate", __FUNCTION__);
		}
		/* Ensure RTS and DTR are raised when baudrate changed from 0 */
		if ((old_termios->c_cflag & CBAUD) == B0) {
			set_mctrl(port, TIOCM_DTR | TIOCM_RTS);
		}
	}

	/* Set flow control */
	/* Note device also supports DTR/CD (ugh) and Xon/Xoff in hardware */
	if (cflag & CRTSCTS) {
		dbg("%s Setting to CRTSCTS flow control", __FUNCTION__);
		if (usb_control_msg(dev, 
				    usb_sndctrlpipe(dev, 0),
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST, 
				    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
				    0 , (FTDI_SIO_RTS_CTS_HS | priv->interface),
				    buf, 0, WDR_TIMEOUT) < 0) {
			err("urb failed to set to rts/cts flow control");
		}		
		
	} else { 
		/*
		 * Xon/Xoff code
		 *
		 * Check the IXOFF status in the iflag component of the termios structure
		 * if IXOFF is not set, the pre-xon/xoff code is executed.
		*/
		if (iflag & IXOFF) {
			dbg("%s  request to enable xonxoff iflag=%04x",__FUNCTION__,iflag);
			// Try to enable the XON/XOFF on the ftdi_sio
			// Set the vstart and vstop -- could have been done up above where
			// a lot of other dereferencing is done but that would be very
			// inefficient as vstart and vstop are not always needed
			vstart=port->tty->termios->c_cc[VSTART];
			vstop=port->tty->termios->c_cc[VSTOP];
			urb_value=(vstop << 8) | (vstart);

			if (usb_control_msg(dev,
					    usb_sndctrlpipe(dev, 0),
					    FTDI_SIO_SET_FLOW_CTRL_REQUEST,
					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
					    urb_value , (FTDI_SIO_XON_XOFF_HS
							 | priv->interface),
					    buf, 0, WDR_TIMEOUT) < 0) {
				err("urb failed to set to xon/xoff flow control");
			}
		} else {
			/* else clause to only run if cfag ! CRTSCTS and iflag ! XOFF */
			/* CHECKME Assuming XON/XOFF handled by tty stack - not by device */
			dbg("%s Turning off hardware flow control", __FUNCTION__);
			if (usb_control_msg(dev, 
					    usb_sndctrlpipe(dev, 0),
					    FTDI_SIO_SET_FLOW_CTRL_REQUEST, 
					    FTDI_SIO_SET_FLOW_CTRL_REQUEST_TYPE,
					    0, priv->interface, 
					    buf, 0, WDR_TIMEOUT) < 0) {
				err("urb failed to clear flow control");
			}				
		}
		
	}
	return;
} /* ftdi_termios */


static int ftdi_tiocmget (struct usb_serial_port *port, struct file *file)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);
	unsigned char buf[2];
	int ret;

	dbg("%s TIOCMGET", __FUNCTION__);
	switch (priv->chip_type) {
	case SIO:
		/* Request the status from the device */
		if ((ret = usb_control_msg(port->serial->dev, 
					   usb_rcvctrlpipe(port->serial->dev, 0),
					   FTDI_SIO_GET_MODEM_STATUS_REQUEST, 
					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
					   0, 0, 
					   buf, 1, WDR_TIMEOUT)) < 0 ) {
			err("%s Could not get modem status of device - err: %d", __FUNCTION__,
			    ret);
			return(ret);
		}
		break;
	case FT8U232AM:
	case FT232BM:
	case FT2232C:
		/* the 8U232AM returns a two byte value (the sio is a 1 byte value) - in the same
		   format as the data returned from the in point */
		if ((ret = usb_control_msg(port->serial->dev, 
					   usb_rcvctrlpipe(port->serial->dev, 0),
					   FTDI_SIO_GET_MODEM_STATUS_REQUEST, 
					   FTDI_SIO_GET_MODEM_STATUS_REQUEST_TYPE,
					   0, priv->interface, 
					   buf, 2, WDR_TIMEOUT)) < 0 ) {
			err("%s Could not get modem status of device - err: %d", __FUNCTION__,
			    ret);
			return(ret);
		}
		break;
	default:
		return -EFAULT;
		break;
	}
	
	return  (buf[0] & FTDI_SIO_DSR_MASK ? TIOCM_DSR : 0) |
		(buf[0] & FTDI_SIO_CTS_MASK ? TIOCM_CTS : 0) |
		(buf[0]  & FTDI_SIO_RI_MASK  ? TIOCM_RI  : 0) |
		(buf[0]  & FTDI_SIO_RLSD_MASK ? TIOCM_CD  : 0) |
		priv->last_dtr_rts;			
}

static int ftdi_tiocmset(struct usb_serial_port *port, struct file * file, unsigned int set, unsigned int clear)
{
	dbg("%s TIOCMSET", __FUNCTION__);
	return update_mctrl(port, set, clear);
}


static int ftdi_ioctl (struct usb_serial_port *port, struct file * file, unsigned int cmd, unsigned long arg)
{
	struct ftdi_private *priv = usb_get_serial_port_data(port);

	dbg("%s cmd 0x%04x", __FUNCTION__, cmd);

	/* Based on code from acm.c and others */
	switch (cmd) {

	case TIOCGSERIAL: /* gets serial port data */
		return get_serial_info(port, (struct serial_struct __user *) arg);

	case TIOCSSERIAL: /* sets serial port data */
		return set_serial_info(port, (struct serial_struct __user *) arg);