tlb_low_64e.S

/*
 *  Low level TLB miss handlers for Book3E
 *
 *  Copyright (C) 2008-2009
 *      Ben. Herrenschmidt (benh@kernel.crashing.org), IBM Corp.
 *
 *  This program is free software; you can redistribute it and/or
 *  modify it under the terms of the GNU General Public License
 *  as published by the Free Software Foundation; either version
 *  2 of the License, or (at your option) any later version.
 */

#include <asm/processor.h>
#include <asm/reg.h>
#include <asm/page.h>
#include <asm/mmu.h>
#include <asm/ppc_asm.h>
#include <asm/asm-offsets.h>
#include <asm/cputable.h>
#include <asm/pgtable.h>
#include <asm/exception-64e.h>
#include <asm/ppc-opcode.h>
#include <asm/kvm_asm.h>
#include <asm/kvm_booke_hv_asm.h>

#ifdef CONFIG_PPC_64K_PAGES
#define VPTE_PMD_SHIFT	(PTE_INDEX_SIZE+1)
#else
#define VPTE_PMD_SHIFT	(PTE_INDEX_SIZE)
#endif
#define VPTE_PUD_SHIFT	(VPTE_PMD_SHIFT + PMD_INDEX_SIZE)
#define VPTE_PGD_SHIFT	(VPTE_PUD_SHIFT + PUD_INDEX_SIZE)
#define VPTE_INDEX_SIZE (VPTE_PGD_SHIFT + PGD_INDEX_SIZE)

/**********************************************************************
 *                                                                    *
 * TLB miss handling for Book3E with a bolted linear mapping          *
 * No virtual page table, no nested TLB misses                        *
 *                                                                    *
 **********************************************************************/

.macro tlb_prolog_bolted intnum addr
	mtspr	SPRN_SPRG_GEN_SCRATCH,r13
	mfspr	r13,SPRN_SPRG_PACA
	std	r10,PACA_EXTLB+EX_TLB_R10(r13)
	mfcr	r10
	std	r11,PACA_EXTLB+EX_TLB_R11(r13)
#ifdef CONFIG_KVM_BOOKE_HV
BEGIN_FTR_SECTION
	mfspr	r11, SPRN_SRR1
END_FTR_SECTION_IFSET(CPU_FTR_EMB_HV)
#endif
	DO_KVM	\intnum, SPRN_SRR1
	std	r16,PACA_EXTLB+EX_TLB_R16(r13)
	mfspr	r16,\addr		/* get faulting address */
	std	r14,PACA_EXTLB+EX_TLB_R14(r13)
	ld	r14,PACAPGD(r13)
	std	r15,PACA_EXTLB+EX_TLB_R15(r13)
	std	r10,PACA_EXTLB+EX_TLB_CR(r13)
	TLB_MISS_PROLOG_STATS_BOLTED
.endm

.macro tlb_epilog_bolted
	ld	r14,PACA_EXTLB+EX_TLB_CR(r13)
	ld	r10,PACA_EXTLB+EX_TLB_R10(r13)
	ld	r11,PACA_EXTLB+EX_TLB_R11(r13)
	mtcr	r14
	ld	r14,PACA_EXTLB+EX_TLB_R14(r13)
	ld	r15,PACA_EXTLB+EX_TLB_R15(r13)
	TLB_MISS_RESTORE_STATS_BOLTED
	ld	r16,PACA_EXTLB+EX_TLB_R16(r13)
	mfspr	r13,SPRN_SPRG_GEN_SCRATCH
.endm

/* Data TLB miss */
	START_EXCEPTION(data_tlb_miss_bolted)
	tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR

	/* We need _PAGE_PRESENT and  _PAGE_ACCESSED set */

	/* We do the user/kernel test for the PID here along with the RW test
	 */
	/* We pre-test some combination of permissions to avoid double
	 * faults:
	 *
	 * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
	 * ESR_ST   is 0x00800000
	 * _PAGE_BAP_SW is 0x00000010
	 * So the shift is >> 19. This tests for supervisor writeability.
	 * If the page happens to be supervisor writeable and not user
	 * writeable, we will take a new fault later, but that should be
	 * a rare enough case.
	 *
	 * We also move ESR_ST in _PAGE_DIRTY position
	 * _PAGE_DIRTY is 0x00001000 so the shift is >> 11
	 *
	 * MAS1 is preset for all we need except for TID that needs to
	 * be cleared for kernel translations
	 */

	mfspr	r11,SPRN_ESR

	srdi	r15,r16,60		/* get region */
	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
	bne-	dtlb_miss_fault_bolted	/* Bail if fault addr is invalid */

	rlwinm	r10,r11,32-19,27,27
	rlwimi	r10,r11,32-16,19,19
	cmpwi	r15,0			/* user vs kernel check */
	ori	r10,r10,_PAGE_PRESENT
	oris	r11,r10,_PAGE_ACCESSED@h

	TLB_MISS_STATS_SAVE_INFO_BOLTED
	bne	tlb_miss_kernel_bolted

tlb_miss_common_bolted:
/*
 * This is the guts of the TLB miss handler for bolted-linear.
 * We are entered with:
 *
 * r16 = faulting address
 * r15 = crap (free to use)
 * r14 = page table base
 * r13 = PACA
 * r11 = PTE permission mask
 * r10 = crap (free to use)
 */
	rldicl	r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
	cmpldi	cr0,r14,0
	clrrdi	r15,r15,3
	beq	tlb_miss_fault_bolted	/* No PGDIR, bail */

BEGIN_MMU_FTR_SECTION
	/* Set the TLB reservation and search for existing entry. Then load
	 * the entry.
	 */
	PPC_TLBSRX_DOT(0,R16)
	ldx	r14,r14,r15		/* grab pgd entry */
	beq	tlb_miss_done_bolted	/* tlb exists already, bail */
MMU_FTR_SECTION_ELSE
	ldx	r14,r14,r15		/* grab pgd entry */
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)

#ifndef CONFIG_PPC_64K_PAGES
	rldicl	r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
	clrrdi	r15,r15,3
	cmpdi	cr0,r14,0
	bge	tlb_miss_fault_bolted	/* Bad pgd entry or hugepage; bail */
	ldx	r14,r14,r15		/* grab pud entry */
#endif /* CONFIG_PPC_64K_PAGES */

	rldicl	r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
	clrrdi	r15,r15,3
	cmpdi	cr0,r14,0
	bge	tlb_miss_fault_bolted
	ldx	r14,r14,r15		/* Grab pmd entry */

	rldicl	r15,r16,64-PAGE_SHIFT+3,64-PTE_INDEX_SIZE-3
	clrrdi	r15,r15,3
	cmpdi	cr0,r14,0
	bge	tlb_miss_fault_bolted
	ldx	r14,r14,r15		/* Grab PTE, normal (!huge) page */

	/* Check if required permissions are met */
	andc.	r15,r11,r14
	rldicr	r15,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
	bne-	tlb_miss_fault_bolted

	/* Now we build the MAS:
	 *
	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
	 * MAS 1   :	Almost fully setup
	 *               - PID already updated by caller if necessary
	 *               - TSIZE need change if !base page size, not
	 *                 yet implemented for now
	 * MAS 2   :	Defaults not useful, need to be redone
	 * MAS 3+7 :	Needs to be done
	 */
	clrrdi	r11,r16,12		/* Clear low crap in EA */
	clrldi	r15,r15,12		/* Clear crap at the top */
	rlwimi	r11,r14,32-19,27,31	/* Insert WIMGE */
	rlwimi	r15,r14,32-8,22,25	/* Move in U bits */
	mtspr	SPRN_MAS2,r11
	andi.	r11,r14,_PAGE_DIRTY
	rlwimi	r15,r14,32-2,26,31	/* Move in BAP bits */

	/* Mask out SW and UW if !DIRTY (XXX optimize this !) */
	bne	1f
	li	r11,MAS3_SW|MAS3_UW
	andc	r15,r15,r11
1:
	mtspr	SPRN_MAS7_MAS3,r15
	tlbwe

tlb_miss_done_bolted:
	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
	tlb_epilog_bolted
	rfi

itlb_miss_kernel_bolted:
	li	r11,_PAGE_PRESENT|_PAGE_BAP_SX	/* Base perm */
	oris	r11,r11,_PAGE_ACCESSED@h
tlb_miss_kernel_bolted:
	mfspr	r10,SPRN_MAS1
	ld	r14,PACA_KERNELPGD(r13)
	cmpldi	cr0,r15,8		/* Check for vmalloc region */
	rlwinm	r10,r10,0,16,1		/* Clear TID */
	mtspr	SPRN_MAS1,r10
	beq+	tlb_miss_common_bolted

tlb_miss_fault_bolted:
	/* We need to check if it was an instruction miss */
	andi.	r10,r11,_PAGE_EXEC|_PAGE_BAP_SX
	bne	itlb_miss_fault_bolted
dtlb_miss_fault_bolted:
	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
	tlb_epilog_bolted
	b	exc_data_storage_book3e
itlb_miss_fault_bolted:
	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
	tlb_epilog_bolted
	b	exc_instruction_storage_book3e

/* Instruction TLB miss */
	START_EXCEPTION(instruction_tlb_miss_bolted)
	tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0

	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
	srdi	r15,r16,60		/* get region */
	TLB_MISS_STATS_SAVE_INFO_BOLTED
	bne-	itlb_miss_fault_bolted

	li	r11,_PAGE_PRESENT|_PAGE_EXEC	/* Base perm */

	/* We do the user/kernel test for the PID here along with the RW test
	 */

	cmpldi	cr0,r15,0			/* Check for user region */
	oris	r11,r11,_PAGE_ACCESSED@h
	beq	tlb_miss_common_bolted
	b	itlb_miss_kernel_bolted

#ifdef CONFIG_PPC_FSL_BOOK3E
/*
 * TLB miss handling for e6500 and derivatives, using hardware tablewalk.
 *
 * Linear mapping is bolted: no virtual page table or nested TLB misses
 * Indirect entries in TLB1, hardware loads resulting direct entries
 *    into TLB0
 * No HES or NV hint on TLB1, so we need to do software round-robin
 * No tlbsrx. so we need a spinlock, and we have to deal
 *    with MAS-damage caused by tlbsx
 * 4K pages only
 */

	START_EXCEPTION(instruction_tlb_miss_e6500)
	tlb_prolog_bolted BOOKE_INTERRUPT_ITLB_MISS SPRN_SRR0

	ld	r11,PACA_TCD_PTR(r13)
	srdi.	r15,r16,60		/* get region */
	ori	r16,r16,1

	TLB_MISS_STATS_SAVE_INFO_BOLTED
	bne	tlb_miss_kernel_e6500	/* user/kernel test */

	b	tlb_miss_common_e6500

	START_EXCEPTION(data_tlb_miss_e6500)
	tlb_prolog_bolted BOOKE_INTERRUPT_DTLB_MISS SPRN_DEAR

	ld	r11,PACA_TCD_PTR(r13)
	srdi.	r15,r16,60		/* get region */
	rldicr	r16,r16,0,62

	TLB_MISS_STATS_SAVE_INFO_BOLTED
	bne	tlb_miss_kernel_e6500	/* user vs kernel check */

/*
 * This is the guts of the TLB miss handler for e6500 and derivatives.
 * We are entered with:
 *
 * r16 = page of faulting address (low bit 0 if data, 1 if instruction)
 * r15 = crap (free to use)
 * r14 = page table base
 * r13 = PACA
 * r11 = tlb_per_core ptr
 * r10 = crap (free to use)
 */
tlb_miss_common_e6500:
	/*
	 * Search if we already have an indirect entry for that virtual
	 * address, and if we do, bail out.
	 *
	 * MAS6:IND should be already set based on MAS4
	 */
	addi	r10,r11,TCD_LOCK
1:	lbarx	r15,0,r10
	cmpdi	r15,0
	bne	2f
	li	r15,1
	stbcx.	r15,0,r10
	bne	1b
	.subsection 1
2:	lbz	r15,0(r10)
	cmpdi	r15,0
	bne	2b
	b	1b
	.previous

	mfspr	r15,SPRN_MAS2

	tlbsx	0,r16
	mfspr	r10,SPRN_MAS1
	andis.	r10,r10,MAS1_VALID@h
	bne	tlb_miss_done_e6500

	/* Undo MAS-damage from the tlbsx */
	mfspr	r10,SPRN_MAS1
	oris	r10,r10,MAS1_VALID@h
	mtspr	SPRN_MAS1,r10
	mtspr	SPRN_MAS2,r15

	/* Now, we need to walk the page tables. First check if we are in
	 * range.
	 */
	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
	bne-	tlb_miss_fault_e6500

	rldicl	r15,r16,64-PGDIR_SHIFT+3,64-PGD_INDEX_SIZE-3
	cmpldi	cr0,r14,0
	clrrdi	r15,r15,3
	beq-	tlb_miss_fault_e6500 /* No PGDIR, bail */
	ldx	r14,r14,r15		/* grab pgd entry */

	rldicl	r15,r16,64-PUD_SHIFT+3,64-PUD_INDEX_SIZE-3
	clrrdi	r15,r15,3
	cmpdi	cr0,r14,0
	bge	tlb_miss_fault_e6500	/* Bad pgd entry or hugepage; bail */
	ldx	r14,r14,r15		/* grab pud entry */

	rldicl	r15,r16,64-PMD_SHIFT+3,64-PMD_INDEX_SIZE-3
	clrrdi	r15,r15,3
	cmpdi	cr0,r14,0
	bge	tlb_miss_fault_e6500
	ldx	r14,r14,r15		/* Grab pmd entry */

	mfspr	r10,SPRN_MAS0
	cmpdi	cr0,r14,0
	bge	tlb_miss_fault_e6500

	/* Now we build the MAS for a 2M indirect page:
	 *
	 * MAS 0   :	ESEL needs to be filled by software round-robin
	 * MAS 1   :	Fully set up
	 *               - PID already updated by caller if necessary
	 *               - TSIZE for now is base ind page size always
	 *               - TID already cleared if necessary
	 * MAS 2   :	Default not 2M-aligned, need to be redone
	 * MAS 3+7 :	Needs to be done
	 */

	ori	r14,r14,(BOOK3E_PAGESZ_4K << MAS3_SPSIZE_SHIFT)
	mtspr	SPRN_MAS7_MAS3,r14

	clrrdi	r15,r16,21		/* make EA 2M-aligned */
	mtspr	SPRN_MAS2,r15

	lbz	r15,TCD_ESEL_NEXT(r11)
	lbz	r16,TCD_ESEL_MAX(r11)
	lbz	r14,TCD_ESEL_FIRST(r11)
	rlwimi	r10,r15,16,0x00ff0000	/* insert esel_next into MAS0 */
	addi	r15,r15,1		/* increment esel_next */
	mtspr	SPRN_MAS0,r10
	cmpw	r15,r16
	iseleq	r15,r14,r15		/* if next == last use first */
	stb	r15,TCD_ESEL_NEXT(r11)

	tlbwe

tlb_miss_done_e6500:
	.macro	tlb_unlock_e6500
	li	r15,0
	isync
	stb	r15,TCD_LOCK(r11)
	.endm

	tlb_unlock_e6500
	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
	tlb_epilog_bolted
	rfi

tlb_miss_kernel_e6500:
	mfspr	r10,SPRN_MAS1
	ld	r14,PACA_KERNELPGD(r13)
	cmpldi	cr0,r15,8		/* Check for vmalloc region */
	rlwinm	r10,r10,0,16,1		/* Clear TID */
	mtspr	SPRN_MAS1,r10
	beq+	tlb_miss_common_e6500

tlb_miss_fault_e6500:
	tlb_unlock_e6500
	/* We need to check if it was an instruction miss */
	andi.	r16,r16,1
	bne	itlb_miss_fault_e6500
dtlb_miss_fault_e6500:
	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
	tlb_epilog_bolted
	b	exc_data_storage_book3e
itlb_miss_fault_e6500:
	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
	tlb_epilog_bolted
	b	exc_instruction_storage_book3e
#endif /* CONFIG_PPC_FSL_BOOK3E */

/**********************************************************************
 *                                                                    *
 * TLB miss handling for Book3E with TLB reservation and HES support  *
 *                                                                    *
 **********************************************************************/


/* Data TLB miss */
	START_EXCEPTION(data_tlb_miss)
	TLB_MISS_PROLOG

	/* Now we handle the fault proper. We only save DEAR in normal
	 * fault case since that's the only interesting values here.
	 * We could probably also optimize by not saving SRR0/1 in the
	 * linear mapping case but I'll leave that for later
	 */
	mfspr	r14,SPRN_ESR
	mfspr	r16,SPRN_DEAR		/* get faulting address */
	srdi	r15,r16,60		/* get region */
	cmpldi	cr0,r15,0xc		/* linear mapping ? */
	TLB_MISS_STATS_SAVE_INFO
	beq	tlb_load_linear		/* yes -> go to linear map load */

	/* The page tables are mapped virtually linear. At this point, though,
	 * we don't know whether we are trying to fault in a first level
	 * virtual address or a virtual page table address. We can get that
	 * from bit 0x1 of the region ID which we have set for a page table
	 */
	andi.	r10,r15,0x1
	bne-	virt_page_table_tlb_miss

	std	r14,EX_TLB_ESR(r12);	/* save ESR */
	std	r16,EX_TLB_DEAR(r12);	/* save DEAR */

	 /* We need _PAGE_PRESENT and  _PAGE_ACCESSED set */
	li	r11,_PAGE_PRESENT
	oris	r11,r11,_PAGE_ACCESSED@h

	/* We do the user/kernel test for the PID here along with the RW test
	 */
	cmpldi	cr0,r15,0		/* Check for user region */

	/* We pre-test some combination of permissions to avoid double
	 * faults:
	 *
	 * We move the ESR:ST bit into the position of _PAGE_BAP_SW in the PTE
	 * ESR_ST   is 0x00800000
	 * _PAGE_BAP_SW is 0x00000010
	 * So the shift is >> 19. This tests for supervisor writeability.
	 * If the page happens to be supervisor writeable and not user
	 * writeable, we will take a new fault later, but that should be
	 * a rare enough case.
	 *
	 * We also move ESR_ST in _PAGE_DIRTY position
	 * _PAGE_DIRTY is 0x00001000 so the shift is >> 11
	 *
	 * MAS1 is preset for all we need except for TID that needs to
	 * be cleared for kernel translations
	 */
	rlwimi	r11,r14,32-19,27,27
	rlwimi	r11,r14,32-16,19,19
	beq	normal_tlb_miss
	/* XXX replace the RMW cycles with immediate loads + writes */
1:	mfspr	r10,SPRN_MAS1
	cmpldi	cr0,r15,8		/* Check for vmalloc region */
	rlwinm	r10,r10,0,16,1		/* Clear TID */
	mtspr	SPRN_MAS1,r10
	beq+	normal_tlb_miss

	/* We got a crappy address, just fault with whatever DEAR and ESR
	 * are here
	 */
	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
	TLB_MISS_EPILOG_ERROR
	b	exc_data_storage_book3e

/* Instruction TLB miss */
	START_EXCEPTION(instruction_tlb_miss)
	TLB_MISS_PROLOG

	/* If we take a recursive fault, the second level handler may need
	 * to know whether we are handling a data or instruction fault in
	 * order to get to the right store fault handler. We provide that
	 * info by writing a crazy value in ESR in our exception frame
	 */
	li	r14,-1	/* store to exception frame is done later */

	/* Now we handle the fault proper. We only save DEAR in the non
	 * linear mapping case since we know the linear mapping case will
	 * not re-enter. We could indeed optimize and also not save SRR0/1
	 * in the linear mapping case but I'll leave that for later
	 *
	 * Faulting address is SRR0 which is already in r16
	 */
	srdi	r15,r16,60		/* get region */
	cmpldi	cr0,r15,0xc		/* linear mapping ? */
	TLB_MISS_STATS_SAVE_INFO
	beq	tlb_load_linear		/* yes -> go to linear map load */

	/* We do the user/kernel test for the PID here along with the RW test
	 */
	li	r11,_PAGE_PRESENT|_PAGE_EXEC	/* Base perm */
	oris	r11,r11,_PAGE_ACCESSED@h

	cmpldi	cr0,r15,0			/* Check for user region */
	std	r14,EX_TLB_ESR(r12)		/* write crazy -1 to frame */
	beq	normal_tlb_miss

	li	r11,_PAGE_PRESENT|_PAGE_BAP_SX	/* Base perm */
	oris	r11,r11,_PAGE_ACCESSED@h
	/* XXX replace the RMW cycles with immediate loads + writes */
	mfspr	r10,SPRN_MAS1
	cmpldi	cr0,r15,8			/* Check for vmalloc region */
	rlwinm	r10,r10,0,16,1			/* Clear TID */
	mtspr	SPRN_MAS1,r10
	beq+	normal_tlb_miss

	/* We got a crappy address, just fault */
	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
	TLB_MISS_EPILOG_ERROR
	b	exc_instruction_storage_book3e

/*
 * This is the guts of the first-level TLB miss handler for direct
 * misses. We are entered with:
 *
 * r16 = faulting address
 * r15 = region ID
 * r14 = crap (free to use)
 * r13 = PACA
 * r12 = TLB exception frame in PACA
 * r11 = PTE permission mask
 * r10 = crap (free to use)
 */
normal_tlb_miss:
	/* So we first construct the page table address. We do that by
	 * shifting the bottom of the address (not the region ID) by
	 * PAGE_SHIFT-3, clearing the bottom 3 bits (get a PTE ptr) and
	 * or'ing the fourth high bit.
	 *
	 * NOTE: For 64K pages, we do things slightly differently in
	 * order to handle the weird page table format used by linux
	 */
	ori	r10,r15,0x1
#ifdef CONFIG_PPC_64K_PAGES
	/* For the top bits, 16 bytes per PTE */
	rldicl	r14,r16,64-(PAGE_SHIFT-4),PAGE_SHIFT-4+4
	/* Now create the bottom bits as 0 in position 0x8000 and
	 * the rest calculated for 8 bytes per PTE
	 */
	rldicl	r15,r16,64-(PAGE_SHIFT-3),64-15
	/* Insert the bottom bits in */
	rlwimi	r14,r15,0,16,31
#else
	rldicl	r14,r16,64-(PAGE_SHIFT-3),PAGE_SHIFT-3+4
#endif
	sldi	r15,r10,60
	clrrdi	r14,r14,3
	or	r10,r15,r14

BEGIN_MMU_FTR_SECTION
	/* Set the TLB reservation and search for existing entry. Then load
	 * the entry.
	 */
	PPC_TLBSRX_DOT(0,R16)
	ld	r14,0(r10)
	beq	normal_tlb_miss_done
MMU_FTR_SECTION_ELSE
	ld	r14,0(r10)
ALT_MMU_FTR_SECTION_END_IFSET(MMU_FTR_USE_TLBRSRV)

finish_normal_tlb_miss:
	/* Check if required permissions are met */
	andc.	r15,r11,r14
	bne-	normal_tlb_miss_access_fault

	/* Now we build the MAS:
	 *
	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
	 * MAS 1   :	Almost fully setup
	 *               - PID already updated by caller if necessary
	 *               - TSIZE need change if !base page size, not
	 *                 yet implemented for now
	 * MAS 2   :	Defaults not useful, need to be redone
	 * MAS 3+7 :	Needs to be done
	 *
	 * TODO: mix up code below for better scheduling
	 */
	clrrdi	r11,r16,12		/* Clear low crap in EA */
	rlwimi	r11,r14,32-19,27,31	/* Insert WIMGE */
	mtspr	SPRN_MAS2,r11

	/* Check page size, if not standard, update MAS1 */
	rldicl	r11,r14,64-8,64-8
#ifdef CONFIG_PPC_64K_PAGES
	cmpldi	cr0,r11,BOOK3E_PAGESZ_64K
#else
	cmpldi	cr0,r11,BOOK3E_PAGESZ_4K
#endif
	beq-	1f
	mfspr	r11,SPRN_MAS1
	rlwimi	r11,r14,31,21,24
	rlwinm	r11,r11,0,21,19
	mtspr	SPRN_MAS1,r11
1:
	/* Move RPN in position */
	rldicr	r11,r14,64-(PTE_RPN_SHIFT-PAGE_SHIFT),63-PAGE_SHIFT
	clrldi	r15,r11,12		/* Clear crap at the top */
	rlwimi	r15,r14,32-8,22,25	/* Move in U bits */
	rlwimi	r15,r14,32-2,26,31	/* Move in BAP bits */

	/* Mask out SW and UW if !DIRTY (XXX optimize this !) */
	andi.	r11,r14,_PAGE_DIRTY
	bne	1f
	li	r11,MAS3_SW|MAS3_UW
	andc	r15,r15,r11
1:
BEGIN_MMU_FTR_SECTION
	srdi	r16,r15,32
	mtspr	SPRN_MAS3,r15
	mtspr	SPRN_MAS7,r16
MMU_FTR_SECTION_ELSE
	mtspr	SPRN_MAS7_MAS3,r15
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)

	tlbwe

normal_tlb_miss_done:
	/* We don't bother with restoring DEAR or ESR since we know we are
	 * level 0 and just going back to userland. They are only needed
	 * if you are going to take an access fault
	 */
	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_NORM_OK)
	TLB_MISS_EPILOG_SUCCESS
	rfi

normal_tlb_miss_access_fault:
	/* We need to check if it was an instruction miss */
	andi.	r10,r11,_PAGE_EXEC
	bne	1f
	ld	r14,EX_TLB_DEAR(r12)
	ld	r15,EX_TLB_ESR(r12)
	mtspr	SPRN_DEAR,r14
	mtspr	SPRN_ESR,r15
	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
	TLB_MISS_EPILOG_ERROR
	b	exc_data_storage_book3e
1:	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
	TLB_MISS_EPILOG_ERROR
	b	exc_instruction_storage_book3e


/*
 * This is the guts of the second-level TLB miss handler for direct
 * misses. We are entered with:
 *
 * r16 = virtual page table faulting address
 * r15 = region (top 4 bits of address)
 * r14 = crap (free to use)
 * r13 = PACA
 * r12 = TLB exception frame in PACA
 * r11 = crap (free to use)
 * r10 = crap (free to use)
 *
 * Note that this should only ever be called as a second level handler
 * with the current scheme when using SW load.
 * That means we can always get the original fault DEAR at
 * EX_TLB_DEAR-EX_TLB_SIZE(r12)
 *
 * It can be re-entered by the linear mapping miss handler. However, to
 * avoid too much complication, it will restart the whole fault at level
 * 0 so we don't care too much about clobbers
 *
 * XXX That code was written back when we couldn't clobber r14. We can now,
 * so we could probably optimize things a bit
 */
virt_page_table_tlb_miss:
	/* Are we hitting a kernel page table ? */
	andi.	r10,r15,0x8

	/* The cool thing now is that r10 contains 0 for user and 8 for kernel,
	 * and we happen to have the swapper_pg_dir at offset 8 from the user
	 * pgdir in the PACA :-).
	 */
	add	r11,r10,r13

	/* If kernel, we need to clear MAS1 TID */
	beq	1f
	/* XXX replace the RMW cycles with immediate loads + writes */
	mfspr	r10,SPRN_MAS1
	rlwinm	r10,r10,0,16,1			/* Clear TID */
	mtspr	SPRN_MAS1,r10
1:
BEGIN_MMU_FTR_SECTION
	/* Search if we already have a TLB entry for that virtual address, and
	 * if we do, bail out.
	 */
	PPC_TLBSRX_DOT(0,R16)
	beq	virt_page_table_tlb_miss_done
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)

	/* Now, we need to walk the page tables. First check if we are in
	 * range.
	 */
	rldicl.	r10,r16,64-(VPTE_INDEX_SIZE+3),VPTE_INDEX_SIZE+3+4
	bne-	virt_page_table_tlb_miss_fault

	/* Get the PGD pointer */
	ld	r15,PACAPGD(r11)
	cmpldi	cr0,r15,0
	beq-	virt_page_table_tlb_miss_fault

	/* Get to PGD entry */
	rldicl	r11,r16,64-VPTE_PGD_SHIFT,64-PGD_INDEX_SIZE-3
	clrrdi	r10,r11,3
	ldx	r15,r10,r15
	cmpdi	cr0,r15,0
	bge	virt_page_table_tlb_miss_fault

#ifndef CONFIG_PPC_64K_PAGES
	/* Get to PUD entry */
	rldicl	r11,r16,64-VPTE_PUD_SHIFT,64-PUD_INDEX_SIZE-3
	clrrdi	r10,r11,3
	ldx	r15,r10,r15
	cmpdi	cr0,r15,0
	bge	virt_page_table_tlb_miss_fault
#endif /* CONFIG_PPC_64K_PAGES */

	/* Get to PMD entry */
	rldicl	r11,r16,64-VPTE_PMD_SHIFT,64-PMD_INDEX_SIZE-3
	clrrdi	r10,r11,3
	ldx	r15,r10,r15
	cmpdi	cr0,r15,0
	bge	virt_page_table_tlb_miss_fault

	/* Ok, we're all right, we can now create a kernel translation for
	 * a 4K or 64K page from r16 -> r15.
	 */
	/* Now we build the MAS:
	 *
	 * MAS 0   :	Fully setup with defaults in MAS4 and TLBnCFG
	 * MAS 1   :	Almost fully setup
	 *               - PID already updated by caller if necessary
	 *               - TSIZE for now is base page size always
	 * MAS 2   :	Use defaults
	 * MAS 3+7 :	Needs to be done
	 *
	 * So we only do MAS 2 and 3 for now...
	 */
	clrldi	r11,r15,4		/* remove region ID from RPN */
	ori	r10,r11,1		/* Or-in SR */

BEGIN_MMU_FTR_SECTION
	srdi	r16,r10,32
	mtspr	SPRN_MAS3,r10
	mtspr	SPRN_MAS7,r16
MMU_FTR_SECTION_ELSE
	mtspr	SPRN_MAS7_MAS3,r10
ALT_MMU_FTR_SECTION_END_IFCLR(MMU_FTR_USE_PAIRED_MAS)

	tlbwe

BEGIN_MMU_FTR_SECTION
virt_page_table_tlb_miss_done:

	/* We have overriden MAS2:EPN but currently our primary TLB miss
	 * handler will always restore it so that should not be an issue,
	 * if we ever optimize the primary handler to not write MAS2 on
	 * some cases, we'll have to restore MAS2:EPN here based on the
	 * original fault's DEAR. If we do that we have to modify the
	 * ITLB miss handler to also store SRR0 in the exception frame
	 * as DEAR.
	 *
	 * However, one nasty thing we did is we cleared the reservation
	 * (well, potentially we did). We do a trick here thus if we
	 * are not a level 0 exception (we interrupted the TLB miss) we
	 * offset the return address by -4 in order to replay the tlbsrx
	 * instruction there
	 */
	subf	r10,r13,r12
	cmpldi	cr0,r10,PACA_EXTLB+EX_TLB_SIZE
	bne-	1f
	ld	r11,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
	addi	r10,r11,-4
	std	r10,PACA_EXTLB+EX_TLB_SIZE+EX_TLB_SRR0(r13)
1:
END_MMU_FTR_SECTION_IFSET(MMU_FTR_USE_TLBRSRV)
	/* Return to caller, normal case */
	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_OK);
	TLB_MISS_EPILOG_SUCCESS
	rfi

virt_page_table_tlb_miss_fault:
	/* If we fault here, things are a little bit tricky. We need to call
	 * either data or instruction store fault, and we need to retrieve
	 * the original fault address and ESR (for data).
	 *
	 * The thing is, we know that in normal circumstances, this is
	 * always called as a second level tlb miss for SW load or as a first
	 * level TLB miss for HW load, so we should be able to peek at the
	 * relevant information in the first exception frame in the PACA.
	 *
	 * However, we do need to double check that, because we may just hit
	 * a stray kernel pointer or a userland attack trying to hit those
	 * areas. If that is the case, we do a data fault. (We can't get here
	 * from an instruction tlb miss anyway).
	 *
	 * Note also that when going to a fault, we must unwind the previous
	 * level as well. Since we are doing that, we don't need to clear or
	 * restore the TLB reservation neither.
	 */
	subf	r10,r13,r12
	cmpldi	cr0,r10,PACA_EXTLB+EX_TLB_SIZE
	bne-	virt_page_table_tlb_miss_whacko_fault

	/* We dig the original DEAR and ESR from slot 0 */
	ld	r15,EX_TLB_DEAR+PACA_EXTLB(r13)
	ld	r16,EX_TLB_ESR+PACA_EXTLB(r13)

	/* We check for the "special" ESR value for instruction faults */
	cmpdi	cr0,r16,-1
	beq	1f
	mtspr	SPRN_DEAR,r15
	mtspr	SPRN_ESR,r16
	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_PT_FAULT);
	TLB_MISS_EPILOG_ERROR
	b	exc_data_storage_book3e
1:	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_PT_FAULT);
	TLB_MISS_EPILOG_ERROR
	b	exc_instruction_storage_book3e

virt_page_table_tlb_miss_whacko_fault:
	/* The linear fault will restart everything so ESR and DEAR will
	 * not have been clobbered, let's just fault with what we have
	 */
	TLB_MISS_STATS_X(MMSTAT_TLB_MISS_PT_FAULT);
	TLB_MISS_EPILOG_ERROR
	b	exc_data_storage_book3e


/**************************************************************
 *                                                            *
 * TLB miss handling for Book3E with hw page table support    *
 *                                                            *
 **************************************************************/


/* Data TLB miss */
	START_EXCEPTION(data_tlb_miss_htw)
	TLB_MISS_PROLOG

	/* Now we handle the fault proper. We only save DEAR in normal
	 * fault case since that's the only interesting values here.
	 * We could probably also optimize by not saving SRR0/1 in the
	 * linear mapping case but I'll leave that for later
	 */
	mfspr	r14,SPRN_ESR
	mfspr	r16,SPRN_DEAR		/* get faulting address */
	srdi	r11,r16,60		/* get region */
	cmpldi	cr0,r11,0xc		/* linear mapping ? */
	TLB_MISS_STATS_SAVE_INFO
	beq	tlb_load_linear		/* yes -> go to linear map load */

	/* We do the user/kernel test for the PID here along with the RW test
	 */
	cmpldi	cr0,r11,0		/* Check for user region */
	ld	r15,PACAPGD(r13)	/* Load user pgdir */
	beq	htw_tlb_miss

	/* XXX replace the RMW cycles with immediate loads + writes */
1:	mfspr	r10,SPRN_MAS1
	cmpldi	cr0,r11,8		/* Check for vmalloc region */
	rlwinm	r10,r10,0,16,1		/* Clear TID */
	mtspr	SPRN_MAS1,r10
	ld	r15,PACA_KERNELPGD(r13)	/* Load kernel pgdir */
	beq+	htw_tlb_miss

	/* We got a crappy address, just fault with whatever DEAR and ESR
	 * are here
	 */
	TLB_MISS_STATS_D(MMSTAT_TLB_MISS_NORM_FAULT)
	TLB_MISS_EPILOG_ERROR
	b	exc_data_storage_book3e

/* Instruction TLB miss */
	START_EXCEPTION(instruction_tlb_miss_htw)
	TLB_MISS_PROLOG

	/* If we take a recursive fault, the second level handler may need
	 * to know whether we are handling a data or instruction fault in
	 * order to get to the right store fault handler. We provide that
	 * info by keeping a crazy value for ESR in r14
	 */
	li	r14,-1	/* store to exception frame is done later */

	/* Now we handle the fault proper. We only save DEAR in the non
	 * linear mapping case since we know the linear mapping case will
	 * not re-enter. We could indeed optimize and also not save SRR0/1
	 * in the linear mapping case but I'll leave that for later
	 *
	 * Faulting address is SRR0 which is already in r16
	 */
	srdi	r11,r16,60		/* get region */
	cmpldi	cr0,r11,0xc		/* linear mapping ? */
	TLB_MISS_STATS_SAVE_INFO
	beq	tlb_load_linear		/* yes -> go to linear map load */

	/* We do the user/kernel test for the PID here along with the RW test
	 */
	cmpldi	cr0,r11,0			/* Check for user region */
	ld	r15,PACAPGD(r13)		/* Load user pgdir */
	beq	htw_tlb_miss

	/* XXX replace the RMW cycles with immediate loads + writes */
1:	mfspr	r10,SPRN_MAS1
	cmpldi	cr0,r11,8			/* Check for vmalloc region */
	rlwinm	r10,r10,0,16,1			/* Clear TID */
	mtspr	SPRN_MAS1,r10
	ld	r15,PACA_KERNELPGD(r13)		/* Load kernel pgdir */
	beq+	htw_tlb_miss

	/* We got a crappy address, just fault */
	TLB_MISS_STATS_I(MMSTAT_TLB_MISS_NORM_FAULT)
	TLB_MISS_EPILOG_ERROR
	b	exc_instruction_storage_book3e


/*
 * This is the guts of the second-level TLB miss handler for direct
 * misses. We are entered with:
 *
 * r16 = virtual page table faulting address
 * r15 = PGD pointer
 * r14 = ESR
 * r13 = PACA
 * r12 = TLB exception frame in PACA
 * r11 = crap (free to use)
 * r10 = crap (free to use)
 *
 * It can be re-entered by the linear mapping miss handler. However, to
 * avoid too much complication, it will save/restore things for us
 */
htw_tlb_miss:
	/* Search if we already have a TLB entry for that virtual address, and
	 * if we do, bail out.
	 *
	 * MAS1:IND should be already set based on MAS4
	 */
	PPC_TLBSRX_DOT(0,R16)
	beq	htw_tlb_miss_done

	/* Now, we need to walk the page tables. First check if we are in
	 * range.
	 */
	rldicl.	r10,r16,64-PGTABLE_EADDR_SIZE,PGTABLE_EADDR_SIZE+4
	bne-	htw_tlb_miss_fault

	/* Get the PGD pointer */
	cmpldi	cr0,r15,0
	beq-	htw_tlb_miss_fault

	/* Get to PGD entry */
	rldicl	r11,r16,64-(PGDIR_SHIFT-3),64-PGD_INDEX_SIZE-3
	clrrdi	r10,r11,3
	ldx	r15,r10,r15
	cmpdi	cr0,r15,0
	bge	htw_tlb_miss_fault

#ifndef CONFIG_PPC_64K_PAGES
	/* Get to PUD entry */
	rldicl	r11,r16,64-(PUD_SHIFT-3),64-PUD_INDEX_SIZE-3
	clrrdi	r10,r11,3
	ldx	r15,r10,r15
	cmpdi	cr0,r15,0
	bge	htw_tlb_miss_fault
#endif /* CONFIG_PPC_64K_PAGES */

	/* Get to PMD entry */
	rldicl	r11,r16,64-(PMD_SHIFT-3),64-PMD_INDEX_SIZE-3
	clrrdi	r10,r11,3
	ldx	r15,r10,r15
	cmpdi	cr0,r15,0
	bge	htw_tlb_miss_fault

	/* Ok, we're all right, we can now create an indirect entry for
	 * a 1M or 256M page.