checkpatch.pl

		}

#goto labels aren't indented, allow a single space however
		if ($line=~/^.\s+[A-Za-z\d_]+:(?![0-9]+)/ and
		   !($line=~/^. [A-Za-z\d_]+:/) and !($line=~/^.\s+default:/)) {
			WARN("labels should not be indented\n" . $herecurr);
		}

# Need a space before open parenthesis after if, while etc
		if ($line=~/\b(if|while|for|switch)\(/) {
			ERROR("need a space before the open parenthesis '('\n" . $herecurr);
		}

# Check for illegal assignment in if conditional.
		if ($line=~/\bif\s*\(.*[^<>!=]=[^=].*\)/) {
			#next if ($line=~/\".*\Q$op\E.*\"/ or $line=~/\'\Q$op\E\'/);
			ERROR("do not use assignment in if condition\n" . $herecurr);
		}

		# Check for }<nl>else {, these must be at the same
		# indent level to be relevant to each other.
		if ($prevline=~/}\s*$/ and $line=~/^.\s*else\s*/ and
						$previndent == $indent) {
			ERROR("else should follow close brace '}'\n" . $hereprev);
		}

#studly caps, commented out until figure out how to distinguish between use of existing and adding new
#		if (($line=~/[\w_][a-z\d]+[A-Z]/) and !($line=~/print/)) {
#		    print "No studly caps, use _\n";
#		    print "$herecurr";
#		    $clean = 0;
#		}

#no spaces allowed after \ in define
		if ($line=~/\#define.*\\\s$/) {
			WARN("Whitepspace after \\ makes next lines useless\n" . $herecurr);
		}

#warn if <asm/foo.h> is #included and <linux/foo.h> is available (uses RAW line)
		if ($tree && $rawline =~ m{^.\#\s*include\s*\<asm\/(.*)\.h\>}) {
			my $checkfile = "include/linux/$1.h";
			if (-f $checkfile) {
				CHK("Use #include <linux/$1.h> instead of <asm/$1.h>\n" .
					$herecurr);
			}
		}

# if and else should not have general statements after it
		if ($line =~ /^.\s*(?:}\s*)?else\b(.*)/ &&
		    $1 !~ /^\s*(?:\sif|{|\\|$)/) {
			ERROR("trailing statements should be on next line\n" . $herecurr);
		}

# multi-statement macros should be enclosed in a do while loop, grab the
# first statement and ensure its the whole macro if its not enclosed
# in a known goot container
		if ($prevline =~ /\#define.*\\/ &&
		   $prevline !~/(?:do\s+{|\(\{|\{)/ &&
		   $line !~ /(?:do\s+{|\(\{|\{)/ &&
		   $line !~ /^.\s*$Declare\s/) {
			# Grab the first statement, if that is the entire macro
			# its ok.  This may start either on the #define line
			# or the one below.
			my $ln = $linenr;
			my $cnt = $realcnt;
			my $off = 0;

			# If the macro starts on the define line start
			# grabbing the statement after the identifier
			$prevline =~ m{^(.#\s*define\s*$Ident(?:\([^\)]*\))?\s*)(.*)\\\s*$};
			##print "1<$1> 2<$2>\n";
			if (defined $2 && $2 ne '') {
				$off = length($1);
				$ln--;
				$cnt++;
			}
			my @ctx = ctx_statement($ln, $cnt, $off);
			my $ctx_ln = $ln + $#ctx + 1;
			my $ctx = join("\n", @ctx);

			# Pull in any empty extension lines.
			while ($ctx =~ /\\$/ &&
			       $lines[$ctx_ln - 1] =~ /^.\s*(?:\\)?$/) {
				$ctx .= $lines[$ctx_ln - 1];
				$ctx_ln++;
			}

			if ($ctx =~ /\\$/) {
				if ($ctx =~ /;/) {
					ERROR("Macros with multiple statements should be enclosed in a do - while loop\n" . "$here\n$ctx\n");
				} else {
					ERROR("Macros with complex values should be enclosed in parenthesis\n" . "$here\n$ctx\n");
				}
			}
		}

# check for redundant bracing round if etc
		if ($line =~ /\b(if|while|for|else)\b/) {
			# Locate the end of the opening statement.
			my @control = ctx_statement($linenr, $realcnt, 0);
			my $nr = $linenr + (scalar(@control) - 1);
			my $cnt = $realcnt - (scalar(@control) - 1);

			my $off = $realcnt - $cnt;
			#print "$off: line<$line>end<" . $lines[$nr - 1] . ">\n";

			# If this is is a braced statement group check it
			if ($lines[$nr - 1] =~ /{\s*$/) {
				my ($lvl, @block) = ctx_block_level($nr, $cnt);

				my $stmt = join(' ', @block);
				$stmt =~ s/(^[^{]*){//;
				my $before = $1;
				$stmt =~ s/}([^}]*$)//;
				my $after = $1;

				#print "block<" . join(' ', @block) . "><" . scalar(@block) . ">\n";
				#print "stmt<$stmt>\n\n";

				# Count the ;'s if there is fewer than two
				# then there can only be one statement,
				# if there is a brace inside we cannot
				# trivially detect if its one statement.
				# Also nested if's often require braces to
				# disambiguate the else binding so shhh there.
				my @semi = ($stmt =~ /;/g);
				push(@semi, "/**/") if ($stmt =~ m@/\*@);
				##print "semi<" . scalar(@semi) . ">\n";
				if ($lvl == 0 && scalar(@semi) < 2 &&
				    $stmt !~ /{/ && $stmt !~ /\bif\b/ &&
				    $before !~ /}/ && $after !~ /{/) {
				    	my $herectx = "$here\n" . join("\n", @control, @block[1 .. $#block]) . "\n";
				    	shift(@block);
					WARN("braces {} are not necessary for single statement blocks\n" . $herectx);
				}
			}
		}

# don't include deprecated include files (uses RAW line)
		for my $inc (@dep_includes) {
			if ($rawline =~ m@\#\s*include\s*\<$inc>@) {
				ERROR("Don't use <$inc>: see Documentation/feature-removal-schedule.txt\n" . $herecurr);
			}
		}

# don't use deprecated functions
		for my $func (@dep_functions) {
			if ($line =~ /\b$func\b/) {
				ERROR("Don't use $func(): see Documentation/feature-removal-schedule.txt\n" . $herecurr);
			}
		}

# no volatiles please
		if ($line =~ /\bvolatile\b/ && $line !~ /\basm\s+volatile\b/) {
			WARN("Use of volatile is usually wrong: see Documentation/volatile-considered-harmful.txt\n" . $herecurr);
		}

# SPIN_LOCK_UNLOCKED & RW_LOCK_UNLOCKED are deprecated
		if ($line =~ /\b(SPIN_LOCK_UNLOCKED|RW_LOCK_UNLOCKED)/) {
			ERROR("Use of $1 is deprecated: see Documentation/spinlocks.txt\n" . $herecurr);
		}

# warn about #if 0
		if ($line =~ /^.#\s*if\s+0\b/) {
			CHK("if this code is redundant consider removing it\n" .
				$herecurr);
		}

# check for needless kfree() checks
		if ($prevline =~ /\bif\s*\(([^\)]*)\)/) {
			my $expr = $1;
			if ($line =~ /\bkfree\(\Q$expr\E\);/) {
				WARN("kfree(NULL) is safe this check is probabally not required\n" . $hereprev);
			}
		}

# warn about #ifdefs in C files
#		if ($line =~ /^.#\s*if(|n)def/ && ($realfile =~ /\.c$/)) {
#			print "#ifdef in C files should be avoided\n";
#			print "$herecurr";
#			$clean = 0;
#		}

# warn about spacing in #ifdefs
		if ($line =~ /^.#\s*(ifdef|ifndef|elif)\s\s+/) {
			ERROR("exactly one space required after that #$1\n" . $herecurr);
		}

# check for spinlock_t definitions without a comment.
		if ($line =~ /^.\s*(struct\s+mutex|spinlock_t)\s+\S+;/) {
			my $which = $1;
			if (!ctx_has_comment($first_line, $linenr)) {
				CHK("$1 definition without comment\n" . $herecurr);
			}
		}
# check for memory barriers without a comment.
		if ($line =~ /\b(mb|rmb|wmb|read_barrier_depends|smp_mb|smp_rmb|smp_wmb|smp_read_barrier_depends)\(/) {
			if (!ctx_has_comment($first_line, $linenr)) {
				CHK("memory barrier without comment\n" . $herecurr);
			}
		}
# check of hardware specific defines
		if ($line =~ m@^.#\s*if.*\b(__i386__|__powerpc64__|__sun__|__s390x__)\b@ && $realfile !~ m@include/asm-@) {
			CHK("architecture specific defines should be avoided\n" .  $herecurr);
		}

# check the location of the inline attribute, that it is between
# storage class and type.
		if ($line =~ /\b$Type\s+$Inline\b/ ||
		    $line =~ /\b$Inline\s+$Storage\b/) {
			ERROR("inline keyword should sit between storage class and type\n" . $herecurr);
		}

# check for new externs in .c files.
		if ($line =~ /^.\s*extern\s/ && ($realfile =~ /\.c$/)) {
			WARN("externs should be avoided in .c files\n" .  $herecurr);
		}

# checks for new __setup's
		if ($rawline =~ /\b__setup\("([^"]*)"/) {
			my $name = $1;

			if (!grep(/$name/, @setup_docs)) {
				CHK("__setup appears un-documented -- check Documentation/kernel-parameters.txt\n" . $herecurr);
			}
		}

# check for pointless casting of kmalloc return
		if ($line =~ /\*\s*\)\s*k[czm]alloc\b/) {
			WARN("unnecessary cast may hide bugs, see http://c-faq.com/malloc/mallocnocast.html\n" . $herecurr);
		}
	}

	if ($chk_patch && !$is_patch) {
		ERROR("Does not appear to be a unified-diff format patch\n");
	}
	if ($is_patch && $chk_signoff && $signoff == 0) {
		ERROR("Missing Signed-off-by: line(s)\n");
	}

	if ($clean == 0 && ($chk_patch || $is_patch)) {
		print report_dump();
	}
	if ($clean == 1 && $quiet == 0) {
		print "Your patch has no obvious style problems and is ready for submission.\n"
	}
	if ($clean == 0 && $quiet == 0) {
		print "Your patch has style problems, please review.  If any of these errors\n";
		print "are false positives report them to the maintainer, see\n";
		print "CHECKPATCH in MAINTAINERS.\n";
	}
	return $clean;
}