drm/tegra: Implement panel support

Use the DRM panel framework to attach a panel to an output. If the panel
attached to a connector supports supports the backlight brightness
accessors, a property will be available to allow the brightness to be
modified from userspace.

Signed-off-by: Thierry Reding <treding@nvidia.com>

Documentation/devicetree/bindings/gpu/nvidia,tegra20-host1x.txt

@@ -125,6 +125,7 @@ of the following host1x client modules:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
   - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
 
 - hdmi: High Definition Multimedia Interface
 
@@ -149,6 +150,7 @@ of the following host1x client modules:
   - nvidia,ddc-i2c-bus: phandle of an I2C controller used for DDC EDID probing
   - nvidia,hpd-gpio: specifies a GPIO used for hotplug detection
   - nvidia,edid: supplies a binary EDID blob
+  - nvidia,panel: phandle of a display panel
 
 - tvo: TV encoder output
 

drivers/gpu/drm/tegra/Kconfig

@@ -6,6 +6,7 @@ config DRM_TEGRA
 	select TEGRA_HOST1X
 	select DRM_KMS_HELPER
 	select DRM_KMS_FB_HELPER
+	select DRM_PANEL
 	select FB_SYS_FILLRECT
 	select FB_SYS_COPYAREA
 	select FB_SYS_IMAGEBLIT

drivers/gpu/drm/tegra/drm.h

@@ -186,6 +186,7 @@ struct tegra_output {
 	const struct tegra_output_ops *ops;
 	enum tegra_output_type type;
 
+	struct drm_panel *panel;
 	struct i2c_adapter *ddc;
 	const struct edid *edid;
 	unsigned int hpd_irq;

drivers/gpu/drm/tegra/output.c

@@ -9,6 +9,7 @@
 
 #include <linux/of_gpio.h>
 
+#include <drm/drm_panel.h>
 #include "drm.h"
 
 static int tegra_connector_get_modes(struct drm_connector *connector)
@@ -17,6 +18,12 @@ static int tegra_connector_get_modes(struct drm_connector *connector)
 	struct edid *edid = NULL;
 	int err = 0;
 
+	if (output->panel) {
+		err = output->panel->funcs->get_modes(output->panel);
+		if (err > 0)
+			return err;
+	}
+
 	if (output->edid)
 		edid = kmemdup(output->edid, sizeof(*edid), GFP_KERNEL);
 	else if (output->ddc)
@@ -72,6 +79,11 @@ tegra_connector_detect(struct drm_connector *connector, bool force)
 		else
 			status = connector_status_connected;
 	} else {
+		if (!output->panel)
+			status = connector_status_disconnected;
+		else
+			status = connector_status_connected;
+
 		if (connector->connector_type == DRM_MODE_CONNECTOR_LVDS)
 			status = connector_status_connected;
 	}
@@ -115,6 +127,15 @@ static const struct drm_encoder_funcs encoder_funcs = {
 
 static void tegra_encoder_dpms(struct drm_encoder *encoder, int mode)
 {
+	struct tegra_output *output = encoder_to_output(encoder);
+	struct drm_panel *panel = output->panel;
+
+	if (panel && panel->funcs) {
+		if (mode != DRM_MODE_DPMS_ON)
+			drm_panel_disable(panel);
+		else
+			drm_panel_enable(panel);
+	}
 }
 
 static bool tegra_encoder_mode_fixup(struct drm_encoder *encoder,
@@ -163,14 +184,23 @@ static irqreturn_t hpd_irq(int irq, void *data)
 
 int tegra_output_probe(struct tegra_output *output)
 {
+	struct device_node *ddc, *panel;
 	enum of_gpio_flags flags;
-	struct device_node *ddc;
 	size_t size;
 	int err;
 
 	if (!output->of_node)
 		output->of_node = output->dev->of_node;
 
+	panel = of_parse_phandle(output->of_node, "nvidia,panel", 0);
+	if (panel) {
+		output->panel = of_drm_find_panel(panel);
+		if (!output->panel)
+			return -EPROBE_DEFER;
+
+		of_node_put(panel);
+	}
+
 	output->edid = of_get_property(output->of_node, "nvidia,edid", &size);
 
 	ddc = of_parse_phandle(output->of_node, "nvidia,ddc-i2c-bus", 0);
@@ -185,9 +215,6 @@ int tegra_output_probe(struct tegra_output *output)
 		of_node_put(ddc);
 	}
 
-	if (!output->edid && !output->ddc)
-		return -ENODEV;
-
 	output->hpd_gpio = of_get_named_gpio_flags(output->of_node,
 						   "nvidia,hpd-gpio", 0,
 						   &flags);
@@ -267,6 +294,9 @@ int tegra_output_init(struct drm_device *drm, struct tegra_output *output)
 	drm_connector_helper_add(&output->connector, &connector_helper_funcs);
 	output->connector.dpms = DRM_MODE_DPMS_OFF;
 
+	if (output->panel)
+		drm_panel_attach(output->panel, &output->connector);
+
 	drm_encoder_init(drm, &output->encoder, &encoder_funcs, encoder);
 	drm_encoder_helper_add(&output->encoder, &encoder_helper_funcs);