- Jul 31, 2006
-
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powermac platform & macintosh driver changes. Built for pmac32_defconfig, g5_defconfig Signed-off-by:
Jeremy Kerr <jk@ozlabs.org> Signed-off-by:
Paul Mackerras <paulus@samba.org>
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. maple platform changes. Built for maple_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. chrp platform changes. Built for chrp32_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. cell platform changes. Built for cell_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. mpc* platform changes. Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. iseries platform changes. Built for iseries_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. pseries platform changes. Built for pseries_defconfig Signed-off-by:
-
Jeremy Kerr authored
Now that get_property() returns a void *, there's no need to cast its return value. Also, treat the return value as const, so we can constify get_property later. powerpc core changes. Signed-off-by:
-
- Jul 14, 2006
-
-
Michael Ellerman authored
Although we pass the address of an iommu_table_cb to HvCallXm_getTceTableParms, we don't actually need the structure definition anywhere except in the iseries iommu code, so move the struct in there. Signed-off-by:
Michael Ellerman <michael@ellerman.id.au> Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au>
-
- Jul 13, 2006
-
-
Stephen Rothwell authored
Also remove unnecessary reference to struct HvLpEvent. Signed-off-by: -
Stephen Rothwell authored
This driver uses the hvc_console.c infrastructure that is used by the pSeries virtual and RTAS consoles. This will allow us to make viocons.c obsolete and is another step along the way to a combined kernel (as viocons could not coexist with CONFIG_VT). Signed-off-by: -
Michael Ellerman authored
The compiler doesn't understand that BUG() never returns, so complains that psize isn't set. Just set it to the normal value, which seems to produce nice code and keeps gcc happy. Signed-off-by:
-
Michael Ellerman authored
PhbId might be used unitialised, so set it to 0xff (nothing) always. Signed-off-by:
-
Michael Ellerman authored
iSeries_Get_Location_Code() has error paths, but currently returns void, so give it a return code and only print the output if it returns successfully. Gcc isn't smart enough to be quiet though, so set frame to 0 to shut it up. Signed-off-by:
-
Michael Ellerman authored
Move ItLpNaca into platforms/iseries now that it's not used elsewhere. Signed-off-by:
-
Michael Ellerman authored
HvLpConfig_get(Primary)LpIndex are currently static inlines that return fields from the itLpNaca, if we make them real functions we can make the itLpNaca private to iSeries. Signed-off-by:
-
Michael Ellerman authored
No one outside platforms/iseries needs ItExtVpdPanel anymore, so move it in there. It used to be needed by lparcfg, and so was exported, but isn't needed anymore, so unexport it. Signed-off-by:
-
Michael Ellerman authored
e2a() was formally used by lparcfg, and so had to be exported, but isn't anymore, so don't. e2a() and strne2a() can both be static, and __init. And e2a can be made much more concise if we use x ... y case labels, while we're there add support for lower case letters. Signed-off-by:
-
Michael Ellerman authored
The ASCII -> EBCDIC functions, e2a() and strne2a() are now only used in dt.c, so move them in there. Signed-off-by:
-
Michael Ellerman authored
We export a bunch of info in /proc/iSeries/config. Currently we pull it directly out of some iSeries specific structs, but we could use the device tree instead, this saves decoding it twice and is a little neater. Signed-off-by:
-
- Jul 07, 2006
-
-
Jeremy Kerr authored
The linux,pci-domain property is no longer used by DLPAR/PCI Hotplug utilites, or LSVPD. This change removes it. Built for ppc64_defconfig. Signed-off-by:
-
Jeremy Kerr authored
The of_bus callbacks map and get_flags can be constified, as they don't alter the range or addr arguments. of_dump_addr and of_read_addr can also be constified. Built for 32- and 64-bit powerpc Signed-off-by:
-
Jeremy Kerr authored
The linux,device property isn't used anywhere within the kernel, and since it's a kernel pointer, it's a little useless for userspace. This change removes the code to create this property in of_device_register. Built for pmac32. Signed-off-by:
-
Benjamin Herrenschmidt authored
The Xserve G5 are capable of frequency switching like other desktop G5s. This enables it. It also fix a Kconfig issue which prevented from building the G5 cpufreq support if CONFIG_PMAC_SMU was not set (the first version of that driver only worked with SMU based macs, but this isn't the case anymore). Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Michael Ellerman authored
There's a bug in my cleaned up mem= handling, if the memory limit is larger than the RMO size we'll erroneously enlarge the RMO size. Fix is to only change the RMO size if the memory limit is less than the current RMO value. Signed-off-by:
-
Benjamin Herrenschmidt authored
There were still some issues with offb when BootX doesn't provide a proper display node, this fixes them. This also re-instates the palette hacks that were disabled a couple of kernel versions ago when I converted to the new OF parsing, and shuffles some functions around to avoid prototypes. Signed-off-by:
-
Benjamin Herrenschmidt authored
The support for Briq machines has been floating around as patches for ages. This cleans it up and adds it once for all. Some of this is based on initial code provided by Karsten Jeppesen <karsten@jeppesens.com> and mostly rewritten from scratch by me. Signed-off-by:
-
Benjamin Herrenschmidt authored
The code in legacy_serial.c wouldn't properly compare OF translation results against OF_BAD_ADDR as it's using a phys_addr_t which is 32 bits on some 32-bit powerpc platforms. This fixes it by always using a u64 which is what is returned by the OF parsing routines. It also makes translation failure harmless for ISA serial ports. If they can't translate, we can't use the UART early, but we can still let the 8250 driver use it later on by using IO port accessors. Signed-off-by:
-
Benjamin Herrenschmidt authored
This patch makes it possible to provide 0 as the clock value for udbg_16550, making it default to the standard 1.8432Mhz clock Signed-off-by:
-
Benjamin Herrenschmidt authored
Pseudo-CHRP machines like Pegasos without an MPIC would crash at boot if CONFIG_SMP was set because the "smp_ops" pointer was set to MPIC related ops unconditionally. This patch makes it NULL on machines that don't support SMP and provides proper default behaviour in the callers when smp_ops is NULL. Signed-off-by:
-
Benjamin Herrenschmidt authored
A warning is hurting my eyes when building 32 bits kernels Signed-off-by:
-
Benjamin Herrenschmidt authored
The Pegasos firmware doesn't create a valid "ranges" property for the ISA bridge, thus causing translation of ISA addresses and IO ports to fail. This fixes it, thus re-enabling proper early serial console to work on Pegasos. Signed-off-by:
-
Johannes Berg authored
Rather long patch, apparently no one has updated the pmac32_defconfig in a while. Signed-off-by: -
Niels Kristian Bech Jensen authored
I got some undefined references to __stack_chk_fail in arch/powerpc/boot/stdio.o and arch/powerpc/boot/prom.o when I was trying to build a kernel on Ubuntu Edgy Eft - which includes Stack Smashing Protection. This patch adds -fno-stack-protector to BOOTCFLAGS in arch/powerpc/boot/Makefile (why does BOOTCFLAGS depend on HOSTCFLAGS and not CFLAGS?). Regards, Niels Kristian Bech Jensen Signed-off-by:
-
- Jul 05, 2006
-
-
Benjamin Herrenschmidt authored
With the new interrupt rework, an interrupt "host" map() callback can be called after the interrupt is already active. It's called again for an already mapped interrupt to allow changing the trigger setup, and currently this is not guarded with a test of wether the interrupt is requested or not. I plan to change some of this logic to be a bit less lenient against random reconfiguring of live interrupts but just not yet. The ported MPIC driver has a bug where when that happens, it will mask the interrupt. This changes it to preserve the previous masking of the interrupt instead. Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
- Jul 03, 2006
-
-
Paul Mackerras authored
At the moment, powerpc and s390 have their own versions of do_softirq which include local_bh_disable() and __local_bh_enable() calls. They end up calling __do_softirq (in kernel/softirq.c) which also does local_bh_disable/enable. Apparently the two levels of disable/enable trigger a warning from some validation code that Ingo is working on, and he would like to see the outer level removed. But to do that, we have to move the account_system_vtime calls that are currently in the arch do_softirq() implementations for powerpc and s390 into the generic __do_softirq() (this is a no-op for other archs because account_system_vtime is defined to be an empty inline function on all other archs). This patch does that. Signed-off-by:
Ingo Molnar <mingo@elte.hu> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Ingo Molnar authored
Accurate hard-IRQ-flags and softirq-flags state tracing. This allows us to attach extra functionality to IRQ flags on/off events (such as trace-on/off). Signed-off-by:
Arjan van de Ven <arjan@linux.intel.com> Signed-off-by:
-
Sam Ravnborg authored
include/linux/version.h contained both actual KERNEL version and UTS_RELEASE that contains a subset from git SHA1 for when kernel was compiled as part of a git repository. This had the unfortunate side-effect that all files including version.h would be recompiled when some git changes was made due to changes SHA1. Split it out so we keep independent parts in separate files. Also update checkversion.pl script to no longer check for UTS_RELEASE. Signed-off-by:Sam Ravnborg <sam@ravnborg.org>
-
Kim Phillips authored
Provide default configuration for the Freescale MPC8349E-mITX board, including the on-board 16MB flash. Signed-off-by:
Kim Phillips <kim.phillips@freescale.com> Signed-off-by:
Timur Tabi <timur@freescale.com> Signed-off-by:
Kumar Gala <galak@kernel.crashing.org>
-
Kim Phillips authored
Added support for the Freescale MPC8343e-mITX board. Currently based on the 8343 SYS code. The 2nd PHY (5-port switch) and SATA are untested (work in progress). Signed-off-by:
-
