- Jul 07, 2018
-
-
Paweł Chmiel authored
This DTS file have initial support Samsung Aries based phones. Initial version have support for: - sdcard - internal memory (present only on non 4g variant) - max8998 pmic and rtc - max17040 fuel gauge - gpio keys - fimd (no panel driver yet) - usb (peripherial mode) - wifi Signed-off-by:
Paweł Chmiel <pawel.mikolaj.chmiel@gmail.com> Signed-off-by:
Krzysztof Kozlowski <krzk@kernel.org>
-
Paweł Chmiel authored
Adds missing interrupt-controller property to gph2 block, to silence following warnings during build: /soc/pinctrl@e0200000/gph2: Missing interrupt-controller or interrupt-map property It's reguired by Samsung Aries boards, an S5PV210 based Samsung Galaxy S (i9000) and Galaxy S 4G phones, which are added in next patches. Signed-off-by:
-
- Jun 25, 2018
-
-
Bartlomiej Zolnierkiewicz authored
Remove no longer needed samsung thermal properties. There should be no functional changes caused by this patch. Signed-off-by:
Bartlomiej Zolnierkiewicz <b.zolnierkie@samsung.com> Signed-off-by:
-
Krzysztof Kozlowski authored
Secondary CPUs should have the same information in DeviceTree as booting CPU from both correctness point of view and for possible hotplug scenarios. Suggested-by:
Viresh Kumar <viresh.kumar@linaro.org> Signed-off-by:
Alim Akhtar <alim.akhtar@samsung.com> Tested-by:
-
Viresh Kumar authored
The cooling device properties, like "#cooling-cells" and "dynamic-power-coefficient", should either be present for all the CPUs of a cluster or none. If these are present only for a subset of CPUs of a cluster then things will start falling apart as soon as the CPUs are brought online in a different order. For example, this will happen because the operating system looks for such properties in the CPU node it is trying to bring up, so that it can register a cooling device. Add such missing properties. Fix other missing properties (clocks, OPP, clock latency) as well to make it all work. Signed-off-by:
-
- Jun 22, 2018
-
-
Will Deacon authored
When delivering a signal to a task that is using rseq, we call into __rseq_handle_notify_resume() so that the registers pushed in the sigframe are updated to reflect the state of the restartable sequence (for example, ensuring that the signal returns to the abort handler if necessary). However, if the rseq management fails due to an unrecoverable fault when accessing userspace or certain combinations of RSEQ_CS_* flags, then we will attempt to deliver a SIGSEGV. This has the potential for infinite recursion if the rseq code continuously fails on signal delivery. Avoid this problem by using force_sigsegv() instead of force_sig(), which is explicitly designed to reset the SEGV handler to SIG_DFL in the case of a recursive fault. In doing so, remove rseq_signal_deliver() from the internal rseq API and have an optional struct ksignal * parameter to rseq_handle_notify_resume() instead. Signed-off-by:
Will Deacon <will.deacon@arm.com> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Acked-by:
Mathieu Desnoyers <mathieu.desnoyers@efficios.com> Cc: peterz@infradead.org Cc: paulmck@linux.vnet.ibm.com Cc: boqun.feng@gmail.com Link: https://lkml.kernel.org/r/1529664307-983-1-git-send-email-will.deacon@arm.com
-
- Jun 19, 2018
-
-
Roger Pau Monne authored
Use a global variable to store the start flags for both PV and PVH. This allows the xen_initial_domain macro to work properly on PVH. Note that ARM is also switched to use the new variable. Signed-off-by:
Boris Ostrovsky <boris.ostrovsky@oracle.com> Signed-off-by:
Roger Pau Monné <roger.pau@citrix.com> Reviewed-by:
Juergen Gross <jgross@suse.com> Signed-off-by:
-
- Jun 15, 2018
-
-
Mauro Carvalho Chehab authored
As we move stuff around, some doc references are broken. Fix some of them via this script: ./scripts/documentation-file-ref-check --fix Manually checked if the produced result is valid, removing a few false-positives. Acked-by:
Takashi Iwai <tiwai@suse.de> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Acked-by:
Stephen Boyd <sboyd@kernel.org> Acked-by:
Charles Keepax <ckeepax@opensource.wolfsonmicro.com> Acked-by:
Mathieu Poirier <mathieu.poirier@linaro.org> Reviewed-by:
Coly Li <colyli@suse.de> Signed-off-by:
Mauro Carvalho Chehab <mchehab+samsung@kernel.org> Acked-by:
Jonathan Corbet <corbet@lwn.net>
-
Mauro Carvalho Chehab authored
Changeset 9919cba7 ("watchdog: Update documentation") updated the documentation, removing the old nmi_watchdog.txt and adding a file with a new content. Update Kconfig files accordingly. Fixes: 9919cba7 ("watchdog: Update documentation") Signed-off-by:
-
- Jun 14, 2018
-
-
Dmitry Vyukov authored
KCOV is code coverage collection facility used, in particular, by syzkaller system call fuzzer. There is some interest in using syzkaller on arm devices. So port KCOV to arm. On implementation level this merely declares that KCOV is supported and disables instrumentation of 3 special cases. Reasons for disabling are commented in code. Tested with qemu-system-arm/vexpress-a15. Link: http://lkml.kernel.org/r/20180511143248.112484-1-dvyukov@google.com Signed-off-by:
Dmitry Vyukov <dvyukov@google.com> Acked-by:
Mark Rutland <mark.rutland@arm.com> Cc: Russell King <linux@armlinux.org.uk> Cc: Abbott Liu <liuwenliang@huawei.com> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Koguchi Takuo <takuo.koguchi.sw@hitachi.com> Cc: <syzkaller@googlegroups.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Masahiro Yamada authored
HAVE_CC_STACKPROTECTOR should be selected by architectures with stack canary implementation. It is not about the compiler support. For the consistency with commit 050e9baa ("Kbuild: rename CC_STACKPROTECTOR[_STRONG] config variables"), remove 'CC_' from the config symbol. I moved the 'select' lines to keep the alphabetical sorting. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Linus Torvalds authored
The changes to automatically test for working stack protector compiler support in the Kconfig files removed the special STACKPROTECTOR_AUTO option that picked the strongest stack protector that the compiler supported. That was all a nice cleanup - it makes no sense to have the AUTO case now that the Kconfig phase can just determine the compiler support directly. HOWEVER. It also meant that doing "make oldconfig" would now _disable_ the strong stackprotector if you had AUTO enabled, because in a legacy config file, the sane stack protector configuration would look like CONFIG_HAVE_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_NONE is not set # CONFIG_CC_STACKPROTECTOR_REGULAR is not set # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_STACKPROTECTOR_AUTO=y and when you ran this through "make oldconfig" with the Kbuild changes, it would ask you about the regular CONFIG_CC_STACKPROTECTOR (that had been renamed from CONFIG_CC_STACKPROTECTOR_REGULAR to just CONFIG_CC_STACKPROTECTOR), but it would think that the STRONG version used to be disabled (because it was really enabled by AUTO), and would disable it in the new config, resulting in: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_CC_STACKPROTECTOR=y # CONFIG_CC_STACKPROTECTOR_STRONG is not set CONFIG_CC_HAS_SANE_STACKPROTECTOR=y That's dangerously subtle - people could suddenly find themselves with the weaker stack protector setup without even realizing. The solution here is to just rename not just the old RECULAR stack protector option, but also the strong one. This does that by just removing the CC_ prefix entirely for the user choices, because it really is not about the compiler support (the compiler support now instead automatially impacts _visibility_ of the options to users). This results in "make oldconfig" actually asking the user for their choice, so that we don't have any silent subtle security model changes. The end result would generally look like this: CONFIG_HAVE_CC_STACKPROTECTOR=y CONFIG_CC_HAS_STACKPROTECTOR_NONE=y CONFIG_STACKPROTECTOR=y CONFIG_STACKPROTECTOR_STRONG=y CONFIG_CC_HAS_SANE_STACKPROTECTOR=y where the "CC_" versions really are about internal compiler infrastructure, not the user selections. Acked-by:
-
- Jun 12, 2018
-
-
Kees Cook authored
The kzalloc() function has a 2-factor argument form, kcalloc(). This patch replaces cases of: kzalloc(a * b, gfp) with: kcalloc(a * b, gfp) as well as handling cases of: kzalloc(a * b * c, gfp) with: kzalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kzalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kzalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kzalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kzalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kzalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kzalloc( - sizeof(u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kzalloc( - sizeof(char) * COUNT + COUNT , ...) | kzalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kzalloc + kcalloc ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kzalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kzalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kzalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kzalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kzalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kzalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kzalloc(C1 * C2 * C3, ...) | kzalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kzalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kzalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kzalloc(sizeof(THING) * C2, ...) | kzalloc(sizeof(TYPE) * C2, ...) | kzalloc(C1 * C2 * C3, ...) | kzalloc(C1 * C2, ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kzalloc + kcalloc ( - (E1) * E2 + E1, E2 , ...) | - kzalloc + kcalloc ( - (E1) * (E2) + E1, E2 , ...) | - kzalloc + kcalloc ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by: -
Kees Cook authored
The kmalloc() function has a 2-factor argument form, kmalloc_array(). This patch replaces cases of: kmalloc(a * b, gfp) with: kmalloc_array(a * b, gfp) as well as handling cases of: kmalloc(a * b * c, gfp) with: kmalloc(array3_size(a, b, c), gfp) as it's slightly less ugly than: kmalloc_array(array_size(a, b), c, gfp) This does, however, attempt to ignore constant size factors like: kmalloc(4 * 1024, gfp) though any constants defined via macros get caught up in the conversion. Any factors with a sizeof() of "unsigned char", "char", and "u8" were dropped, since they're redundant. The tools/ directory was manually excluded, since it has its own implementation of kmalloc(). The Coccinelle script used for this was: // Fix redundant parens around sizeof(). @@ type TYPE; expression THING, E; @@ ( kmalloc( - (sizeof(TYPE)) * E + sizeof(TYPE) * E , ...) | kmalloc( - (sizeof(THING)) * E + sizeof(THING) * E , ...) ) // Drop single-byte sizes and redundant parens. @@ expression COUNT; typedef u8; typedef __u8; @@ ( kmalloc( - sizeof(u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(__u8) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(unsigned char) * (COUNT) + COUNT , ...) | kmalloc( - sizeof(u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(__u8) * COUNT + COUNT , ...) | kmalloc( - sizeof(char) * COUNT + COUNT , ...) | kmalloc( - sizeof(unsigned char) * COUNT + COUNT , ...) ) // 2-factor product with sizeof(type/expression) and identifier or constant. @@ type TYPE; expression THING; identifier COUNT_ID; constant COUNT_CONST; @@ ( - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_ID) + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_ID + COUNT_ID, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (COUNT_CONST) + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * COUNT_CONST + COUNT_CONST, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_ID) + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_ID + COUNT_ID, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (COUNT_CONST) + COUNT_CONST, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * COUNT_CONST + COUNT_CONST, sizeof(THING) , ...) ) // 2-factor product, only identifiers. @@ identifier SIZE, COUNT; @@ - kmalloc + kmalloc_array ( - SIZE * COUNT + COUNT, SIZE , ...) // 3-factor product with 1 sizeof(type) or sizeof(expression), with // redundant parens removed. @@ expression THING; identifier STRIDE, COUNT; type TYPE; @@ ( kmalloc( - sizeof(TYPE) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(TYPE) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(TYPE)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * (COUNT) * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * (STRIDE) + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) | kmalloc( - sizeof(THING) * COUNT * STRIDE + array3_size(COUNT, STRIDE, sizeof(THING)) , ...) ) // 3-factor product with 2 sizeof(variable), with redundant parens removed. @@ expression THING1, THING2; identifier COUNT; type TYPE1, TYPE2; @@ ( kmalloc( - sizeof(TYPE1) * sizeof(TYPE2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(TYPE2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(THING1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(THING1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * COUNT + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) | kmalloc( - sizeof(TYPE1) * sizeof(THING2) * (COUNT) + array3_size(COUNT, sizeof(TYPE1), sizeof(THING2)) , ...) ) // 3-factor product, only identifiers, with redundant parens removed. @@ identifier STRIDE, SIZE, COUNT; @@ ( kmalloc( - (COUNT) * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * STRIDE * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - (COUNT) * (STRIDE) * (SIZE) + array3_size(COUNT, STRIDE, SIZE) , ...) | kmalloc( - COUNT * STRIDE * SIZE + array3_size(COUNT, STRIDE, SIZE) , ...) ) // Any remaining multi-factor products, first at least 3-factor products, // when they're not all constants... @@ expression E1, E2, E3; constant C1, C2, C3; @@ ( kmalloc(C1 * C2 * C3, ...) | kmalloc( - (E1) * E2 * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * E3 + array3_size(E1, E2, E3) , ...) | kmalloc( - (E1) * (E2) * (E3) + array3_size(E1, E2, E3) , ...) | kmalloc( - E1 * E2 * E3 + array3_size(E1, E2, E3) , ...) ) // And then all remaining 2 factors products when they're not all constants, // keeping sizeof() as the second factor argument. @@ expression THING, E1, E2; type TYPE; constant C1, C2, C3; @@ ( kmalloc(sizeof(THING) * C2, ...) | kmalloc(sizeof(TYPE) * C2, ...) | kmalloc(C1 * C2 * C3, ...) | kmalloc(C1 * C2, ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * (E2) + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(TYPE) * E2 + E2, sizeof(TYPE) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * (E2) + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - sizeof(THING) * E2 + E2, sizeof(THING) , ...) | - kmalloc + kmalloc_array ( - (E1) * E2 + E1, E2 , ...) | - kmalloc + kmalloc_array ( - (E1) * (E2) + E1, E2 , ...) | - kmalloc + kmalloc_array ( - E1 * E2 + E1, E2 , ...) ) Signed-off-by:
-
- Jun 08, 2018
-
-
Laurent Dufour authored
Currently the PTE special supports is turned on in per architecture header files. Most of the time, it is defined in arch/*/include/asm/pgtable.h depending or not on some other per architecture static definition. This patch introduce a new configuration variable to manage this directly in the Kconfig files. It would later replace __HAVE_ARCH_PTE_SPECIAL. Here notes for some architecture where the definition of __HAVE_ARCH_PTE_SPECIAL is not obvious: arm __HAVE_ARCH_PTE_SPECIAL which is currently defined in arch/arm/include/asm/pgtable-3level.h which is included by arch/arm/include/asm/pgtable.h when CONFIG_ARM_LPAE is set. So select ARCH_HAS_PTE_SPECIAL if ARM_LPAE. powerpc __HAVE_ARCH_PTE_SPECIAL is defined in 2 files: - arch/powerpc/include/asm/book3s/64/pgtable.h - arch/powerpc/include/asm/pte-common.h The first one is included if (PPC_BOOK3S & PPC64) while the second is included in all the other cases. So select ARCH_HAS_PTE_SPECIAL all the time. sparc: __HAVE_ARCH_PTE_SPECIAL is defined if defined(__sparc__) && defined(__arch64__) which are defined through the compiler in sparc/Makefile if !SPARC32 which I assume to be if SPARC64. So select ARCH_HAS_PTE_SPECIAL if SPARC64 There is no functional change introduced by this patch. Link: http://lkml.kernel.org/r/1523433816-14460-2-git-send-email-ldufour@linux.vnet.ibm.com Signed-off-by:
Laurent Dufour <ldufour@linux.vnet.ibm.com> Suggested-by:
Jerome Glisse <jglisse@redhat.com> Reviewed-by:
David Rientjes <rientjes@google.com> Cc: Michal Hocko <mhocko@kernel.org> Cc: "Aneesh Kumar K . V" <aneesh.kumar@linux.vnet.ibm.com> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Catalin Marinas <catalin.marinas@arm.com> Cc: Will Deacon <will.deacon@arm.com> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: Rich Felker <dalias@libc.org> Cc: David S. Miller <davem@davemloft.net> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@redhat.com> Cc: Vineet Gupta <vgupta@synopsys.com> Cc: Palmer Dabbelt <palmer@sifive.com> Cc: Albert Ou <albert@sifive.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: David Rientjes <rientjes@google.com> Cc: Robin Murphy <robin.murphy@arm.com> Cc: Christophe LEROY <christophe.leroy@c-s.fr> Signed-off-by:
-
- Jun 07, 2018
-
-
Mark Brown authored
regulator: fixed/gpio: Revert GPIO descriptor changes due to platform breakage Commit 6059577c "regulator: fixed: Convert to use GPIO descriptor only" broke at least the ams-delta platform since the lookup tables added to the board files use the function name "enable" while the driver uses NULL causing the regulator to not acquire and control the enable GPIOs. Revert that and a couple of other commits that are caught up with it to fix the issue: 2b6c00c1 "ARM: pxa, regulator: fix building ezx e680" 6059577c "regulator: fixed: Convert to use GPIO descriptor only" 37bed97f "regulator: gpio: Get enable GPIO using GPIO descriptor" Reported-by:
Janusz Krzysztofik <jmkrzyszt@gmail.com> Signed-off-by:
Mark Brown <broonie@kernel.org>
-
- Jun 06, 2018
-
-
Mathieu Desnoyers authored
Wire up the rseq system call on 32-bit ARM. This provides an ABI improving the speed of a user-space getcpu operation on ARM by skipping the getcpu system call on the fast path, as well as improving the speed of user-space operations on per-cpu data compared to using load-linked/store-conditional. Signed-off-by:
-
Mathieu Desnoyers authored
Syscalls are not allowed inside restartable sequences, so add a call to rseq_syscall() at the very beginning of system call exiting path for CONFIG_DEBUG_RSEQ=y kernel. This could help us to detect whether there is a syscall issued inside restartable sequences. Signed-off-by:
-
Mathieu Desnoyers authored
Call the rseq_handle_notify_resume() function on return to userspace if TIF_NOTIFY_RESUME thread flag is set. Perform fixup on the pre-signal frame when a signal is delivered on top of a restartable sequence critical section. Signed-off-by:
-
- Jun 05, 2018
-
-
Wang YanQing authored
The names for BPF_ALU64 | BPF_ARSH are emit_a32_arsh_*, the names for BPF_ALU64 | BPF_LSH are emit_a32_lsh_*, but the names for BPF_ALU64 | BPF_RSH are emit_a32_lsr_*. For consistence reason, let's rename emit_a32_lsr_* to emit_a32_rsh_*. This patch also corrects a wrong comment. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by:
Wang YanQing <udknight@gmail.com> Cc: Shubham Bansal <illusionist.neo@gmail.com> Cc: linux-arm-kernel@lists.infradead.org Cc: linux@armlinux.org.uk Signed-off-by:
Daniel Borkmann <daniel@iogearbox.net>
-
Wang YanQing authored
imm24 is signed, so the right range is: [-(1<<(24 - 1)), (1<<(24 - 1)) - 1] Note: this patch also fix a typo. Fixes: 39c13c20 ("arm: eBPF JIT compiler") Signed-off-by:
-
- Jun 02, 2018
-
-
Joel Stanley authored
The register address should be the full address of the rng, not the offset from the start of the SCU. Fixes: 5daa8212 ("ARM: dts: aspeed: Describe random number device") Reviewed-by:
Andrew Jeffery <andrew@aj.id.au> Signed-off-by:
Joel Stanley <joel@jms.id.au> Signed-off-by:
Olof Johansson <olof@lixom.net>
-
- Jun 01, 2018
-
-
Anson Huang authored
ENET "ipg" clock should be IMX7D_ENETx_IPG_ROOT_CLK rather than IMX7D_ENET_AXI_ROOT_CLK which is for ENET bus clock. Based on Andy Duan's patch from the NXP kernel tree. Signed-off-by:
Anson Huang <Anson.Huang@nxp.com> Reviewed-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
-
Marc Orr authored
The kvm struct has been bloating. For example, it's tens of kilo-bytes for x86, which turns out to be a large amount of memory to allocate contiguously via kzalloc. Thus, this patch does the following: 1. Uses architecture-specific routines to allocate the kvm struct via vzalloc for x86. 2. Switches arm to __KVM_HAVE_ARCH_VM_ALLOC so that it can use vzalloc when has_vhe() is true. Other architectures continue to default to kalloc, as they have a dependency on kalloc or have a small-enough struct kvm. Signed-off-by:
Marc Orr <marcorr@google.com> Reviewed-by:
Marc Zyngier <marc.zyngier@arm.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Luc Van Oostenryck authored
By default, sparse assumes a 64bit machine when compiled on x86-64 and 32bit when compiled on anything else. This can of course create all sort of problems for the other archs, like issuing false warnings ('shift too big (32) for type unsigned long'), or worse, failing to emit legitimate warnings. Fix this by adding the -m32/-m64 flag, depending on CONFIG_64BIT, to CHECKFLAGS in the main Makefile (and so for all archs). Also, remove the now unneeded -m32/-m64 in arch specific Makefiles. Signed-off-by:Luc Van Oostenryck <luc.vanoostenryck@gmail.com> Signed-off-by:
-
- May 31, 2018
-
-
Russell King authored
Prevent speculation at the syscall table decoding by clamping the index used to zero on invalid system call numbers, and using the csdb speculative barrier. Signed-off-by:
Russell King <rmk+kernel@armlinux.org.uk> Acked-by:
Tony Lindgren <tony@atomide.com> Reviewed-by:
-
Russell King authored
Add an implementation of the array_index_mask_nospec() function for mitigating Spectre variant 1 throughout the kernel. Signed-off-by:
-
Russell King authored
Add assembly and C macros for the new CSDB instruction. Signed-off-by:
-
Marc Zyngier authored
Now that all our infrastructure is in place, let's expose the availability of ARCH_WORKAROUND_2 to guests. We take this opportunity to tidy up a couple of SMCCC constants. Acked-by:
Christoffer Dall <christoffer.dall@arm.com> Reviewed-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Marc Zyngier authored
In order to offer ARCH_WORKAROUND_2 support to guests, we need a bit of infrastructure. Let's add a flag indicating whether or not the guest uses SSBD mitigation. Depending on the state of this flag, allow KVM to disable ARCH_WORKAROUND_2 before entering the guest, and enable it when exiting it. Reviewed-by:
-
Arnd Bergmann authored
The reference to camera_supply_gpiod_table was added in the wrong function, as observed from this randconfig build failure: arch/arm/mach-pxa/ezx.c: In function 'e680_init': arch/arm/mach-pxa/ezx.c:905:26: error: 'camera_supply_gpiod_table' undeclared (first use in this function) gpiod_add_lookup_table(&camera_supply_gpiod_table); Fixes: 6059577c ("regulator: fixed: Convert to use GPIO descriptor only") Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Russell King authored
Report support for SMCCC_ARCH_WORKAROUND_1 to KVM guests for affected CPUs. Signed-off-by:
-
Russell King authored
We want SMCCC_ARCH_WORKAROUND_1 to be fast. As fast as possible. So let's intercept it as early as we can by testing for the function call number as soon as we've identified a HVC call coming from the guest. Signed-off-by:
-
Russell King authored
Include Brahma B15 in the Spectre v2 KVM workarounds. Signed-off-by:
Florian Fainelli <f.fainelli@gmail.com> Boot-tested-by:
-
Marc Zyngier authored
In order to avoid aliasing attacks against the branch predictor on Cortex-A15, let's invalidate the BTB on guest exit, which can only be done by invalidating the icache (with ACTLR[0] being set). We use the same hack as for A12/A17 to perform the vector decoding. Signed-off-by:
-
Marc Zyngier authored
In order to avoid aliasing attacks against the branch predictor, let's invalidate the BTB on guest exit. This is made complicated by the fact that we cannot take a branch before invalidating the BTB. We only apply this to A12 and A17, which are the only two ARM cores on which this useful. Signed-off-by:
-
Russell King authored
Warn at error level if the context switching function is not what we are expecting. This can happen with big.Little systems, which we currently do not support. Signed-off-by:
-
Russell King authored
Add firmware based hardening for cores that require more complex handling in firmware. Signed-off-by:
-
Russell King authored
In order to prevent aliasing attacks on the branch predictor, invalidate the BTB or instruction cache on CPUs that are known to be affected when taking an abort on a address that is outside of a user task limit: Cortex A8, A9, A12, A17, A73, A75: flush BTB. Cortex A15, Brahma B15: invalidate icache. If the IBE bit is not set, then there is little point to enabling the workaround. Signed-off-by:
-
Russell King authored
When the branch predictor hardening is enabled, firmware must have set the IBE bit in the auxiliary control register. If this bit has not been set, the Spectre workarounds will not be functional. Add validation that this bit is set, and print a warning at alert level if this is not the case. Signed-off-by:
-
