- Aug 20, 2019
-
-
Chuck Lever authored
Clean up. There is only one remaining rpcrdma_mr_put call site, and it can be directly replaced with unmap_and_put because mr->mr_dir is set to DMA_NONE just before the call. Now all the call sites do a DMA unmap, and we can just rename mr_unmap_and_put to mr_put, which nicely matches mr_get. Signed-off-by:
Chuck Lever <chuck.lever@oracle.com> Signed-off-by:
Anna Schumaker <Anna.Schumaker@Netapp.com>
-
Chuck Lever authored
Clean up: rpcrdma_mr_pop call sites check if the list is empty first. Let's replace the list_empty with less costly logic. Signed-off-by:
-
Chuck Lever authored
Commit 48be539d ("xprtrdma: Introduce ->alloc_slot call-out for xprtrdma") added a separate alloc_slot and free_slot to the RPC/RDMA transport. Later, commit 75891f50 ("SUNRPC: Support for congestion control when queuing is enabled") modified the generic alloc/free_slot methods, but neglected the methods in xprtrdma. Found via code review. Fixes: 75891f50 ("SUNRPC: Support for congestion control ... ") Signed-off-by:
-
Chuck Lever authored
Clean up: There are other "all" list heads. For code clarity distinguish this one as for use only for MRs by renaming it. Signed-off-by:
-
Chuck Lever authored
Make the field name the same for all trace points that handle pointers to struct rpcrdma_rep. That makes it easy to grep for matching rep points in trace output. Signed-off-by:
-
Chuck Lever authored
Although I haven't seen any performance results that justify it, I've received several complaints that NFS/RDMA no longer supports a maximum rsize and wsize of 1MB. These days it is somewhat smaller. To simplify the logic that determines whether a chunk list is necessary, the implementation uses a fixed maximum size of the transport header. Currently that maximum size is 256 bytes, one quarter of the default inline threshold size for RPC/RDMA v1. Since commit a7886849 ("xprtrdma: Reduce max_frwr_depth"), the size of chunks is also smaller to take advantage of inline page lists in device internal MR data structures. The combination of these two design choices has reduced the maximum NFS rsize and wsize that can be used for most RNIC/HCAs. Increasing the maximum transport header size and the maximum number of RDMA segments it can contain increases the negotiated maximum rsize/wsize on common RNIC/HCAs. Signed-off-by:
-
Chuck Lever authored
Commit 302d3deb ("xprtrdma: Prevent inline overflow") added this calculation back in 2016, but got it wrong. I tested only the lower bound, which is why there is a max_t there. The upper bound should be rounded up too. Now, when using DIV_ROUND_UP, that takes care of the lower bound as well. Signed-off-by:
-
Chuck Lever authored
Comment was made obsolete by commit 8cec3dba ("xprtrdma: rpcrdma_regbuf alignment"). Signed-off-by:
-
Chuck Lever authored
Things have changed since this comment was written. In particular, the reworking of connection closing, on-demand creation of MRs, and the removal of fr_state all mean that deferring MR recovery to frwr_map is no longer needed. The description is obsolete. Signed-off-by:
-
Chuck Lever authored
Micro-optimization: For xdr_commit_encode call sites in net/sunrpc/xdr.c, eliminate the extra calling sequence. On my client, this change saves about a microsecond for every 30 calls to xdr_reserve_space(). Signed-off-by:
-
Chuck Lever authored
Clean up: commit c544577d ("SUNRPC: Clean up transport write space handling") appears to have removed the last caller of rpc_wake_up_queued_task_on_wq(). Signed-off-by:
-
- Aug 06, 2019
-
-
Vladimir Oltean authored
When RX timestamping is enabled and two link-local (non-meta) frames are received in a row, this constitutes an error. The tagger is always caching the last link-local frame, in an attempt to merge it with the meta follow-up frame when that arrives. To recover from the above error condition, the initial cached link-local frame is dropped and the second frame in a row is cached (in expectance of the second meta frame). However, when dropping the initial link-local frame, its backing memory was being leaked. Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by:
Vladimir Oltean <olteanv@gmail.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
Vladimir Oltean authored
After a meta frame is received, it is associated with the cached sp->data->stampable_skb from the DSA tagger private structure. Cached means its refcount is incremented with skb_get() in order for dsa_switch_rcv() to not free it when the tagger .rcv returns NULL. The mistake is that skb_unref() is not the correct function to use. It will correctly decrement the refcount (which will go back to zero) but the skb memory will not be freed. That is the job of kfree_skb(), which also calls skb_unref(). But it turns out that freeing the cached stampable_skb is in fact not necessary. It is still a perfectly valid skb, and now it is even annotated with the partial RX timestamp. So remove the skb_copy() altogether and simply pass the stampable_skb with a refcount of 1 (incremented by us, decremented by dsa_switch_rcv) up the stack. Fixes: f3097be2 ("net: dsa: sja1105: Add a state machine for RX timestamping") Signed-off-by:
-
Roman Mashak authored
Add get_fill_size() routine used to calculate the action size when building a batch of events. Fixes: c7e2b968 ("sched: introduce vlan action") Signed-off-by:
Roman Mashak <mrv@mojatatu.com> Signed-off-by:
-
- Aug 05, 2019
-
-
Nikolay Aleksandrov authored
Most of the bridge device's vlan init bugs come from the fact that its default pvid is created at the wrong time, way too early in ndo_init() before the device is even assigned an ifindex. It introduces a bug when the bridge's dev_addr is added as fdb during the initial default pvid creation the notification has ifindex/NDA_MASTER both equal to 0 (see example below) which really makes no sense for user-space[0] and is wrong. Usually user-space software would ignore such entries, but they are actually valid and will eventually have all necessary attributes. It makes much more sense to send a notification *after* the device has registered and has a proper ifindex allocated rather than before when there's a chance that the registration might still fail or to receive it with ifindex/NDA_MASTER == 0. Note that we can remove the fdb flush from br_vlan_flush() since that case can no longer happen. At NETDEV_REGISTER br->default_pvid is always == 1 as it's initialized by br_vlan_init() before that and at NETDEV_UNREGISTER it can be anything depending why it was called (if called due to NETDEV_REGISTER error it'll still be == 1, otherwise it could be any value changed during the device life time). For the demonstration below a small change to iproute2 for printing all fdb notifications is added, because it contained a workaround not to show entries with ifindex == 0. Command executed while monitoring: $ ip l add br0 type bridge Before (both ifindex and master == 0): $ bridge monitor fdb 36:7e:8a:b3:56:ba dev * vlan 1 master * permanent After (proper br0 ifindex): $ bridge monitor fdb e6:2a:ae:7a:b7:48 dev br0 vlan 1 master br0 permanent v4: move only the default pvid init/deinit to NETDEV_REGISTER/UNREGISTER v3: send the correct v2 patch with all changes (stub should return 0) v2: on error in br_vlan_init set br->vlgrp to NULL and return 0 in the br_vlan_bridge_event stub when bridge vlans are disabled [0] https://bugzilla.kernel.org/show_bug.cgi?id=204389 Reported-by:michael-dev <michael-dev@fami-braun.de> Fixes: 5be5a2df ("bridge: Add filtering support for default_pvid") Signed-off-by:
Nikolay Aleksandrov <nikolay@cumulusnetworks.com> Acked-by:
Roopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by:
-
Ursula Braun authored
FASTOPEN is not possible with SMC. sendmsg() with msg_flag MSG_FASTOPEN triggers a fallback to TCP if the socket is in state SMC_INIT. But if a nonblocking connect is already started, fallback to TCP is no longer possible, even though the socket may still be in state SMC_INIT. And if a nonblocking connect is already started, a listen() call does not make sense. Reported-by:
<syzbot+bd8cc73d665590a1fcad@syzkaller.appspotmail.com> Fixes: 50717a37 ("net/smc: nonblocking connect rework") Signed-off-by:
Ursula Braun <ubraun@linux.ibm.com> Signed-off-by:
Karsten Graul <kgraul@linux.ibm.com> Signed-off-by:
-
Ursula Braun authored
The setsockopts options TCP_NODELAY and TCP_CORK may schedule the tx worker. Make sure the socket is not yet moved into SMC_CLOSED state (for instance by a shutdown SHUT_RDWR call). Reported-by:
<syzbot+92209502e7aab127c75f@syzkaller.appspotmail.com> Reported-by:
<syzbot+b972214bb803a343f4fe@syzkaller.appspotmail.com> Fixes: 01d2f7e2 ("net/smc: sockopts TCP_NODELAY and TCP_CORK") Signed-off-by:
-
David Ahern authored
The nexthop path in rt6_update_exception_stamp_rt needs to call rcu_read_unlock if it fails to find a fib6_nh match rather than just returning. Fixes: e659ba31 ("ipv6: Handle all fib6_nh in a nexthop in exception handling") Signed-off-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Jakub Kicinski authored
Looks like we were slightly overzealous with the shutdown() cleanup. Even though the sock->sk_state can reach CLOSED again, socket->state will not got back to SS_UNCONNECTED once connections is ESTABLISHED. Meaning we will see EISCONN if we try to reconnect, and EINVAL if we try to listen. Only listen sockets can be shutdown() and reused, but since ESTABLISHED sockets can never be re-connected() or used for listen() we don't need to try to clean up the ULP state early. Fixes: 32857cf5 ("net/tls: fix transition through disconnect with close") Signed-off-by:
Jakub Kicinski <jakub.kicinski@netronome.com> Signed-off-by:
-
Jesper Dangaard Brouer authored
When generic-XDP was moved to a later processing step by commit 458bf2f2 ("net: core: support XDP generic on stacked devices.") a regression was introduced when using bpf_xdp_adjust_head. The issue is that after this commit the skb->network_header is now changed prior to calling generic XDP and not after. Thus, if the header is changed by XDP (via bpf_xdp_adjust_head), then skb->network_header also need to be updated again. Fix by calling skb_reset_network_header(). Fixes: 458bf2f2 ("net: core: support XDP generic on stacked devices.") Reported-by:
Brandon Cazander <brandon.cazander@multapplied.net> Signed-off-by:
Jesper Dangaard Brouer <brouer@redhat.com> Signed-off-by:
-
Dmytro Linkin authored
Currently init call of all actions (except ipt) init their 'parm' structure as a direct pointer to nla data in skb. This leads to race condition when some of the filter actions were initialized successfully (and were assigned with idr action index that was written directly into nla data), but then were deleted and retried (due to following action module missing or classifier-initiated retry), in which case action init code tries to insert action to idr with index that was assigned on previous iteration. During retry the index can be reused by another action that was inserted concurrently, which causes unintended action sharing between filters. To fix described race condition, save action idr index to temporary stack-allocated variable instead on nla data. Fixes: 0190c1d4 ("net: sched: atomically check-allocate action") Signed-off-by:
Dmytro Linkin <dmitrolin@mellanox.com> Signed-off-by:
Vlad Buslov <vladbu@mellanox.com> Acked-by:
Cong Wang <xiyou.wangcong@gmail.com> Signed-off-by:
-
- Aug 03, 2019
-
-
Dexuan Cui authored
There is a race condition for an established connection that is being closed by the guest: the refcnt is 4 at the end of hvs_release() (Note: here the 'remove_sock' is false): 1 for the initial value; 1 for the sk being in the bound list; 1 for the sk being in the connected list; 1 for the delayed close_work. After hvs_release() finishes, __vsock_release() -> sock_put(sk) *may* decrease the refcnt to 3. Concurrently, hvs_close_connection() runs in another thread: calls vsock_remove_sock() to decrease the refcnt by 2; call sock_put() to decrease the refcnt to 0, and free the sk; next, the "release_sock(sk)" may hang due to use-after-free. In the above, after hvs_release() finishes, if hvs_close_connection() runs faster than "__vsock_release() -> sock_put(sk)", then there is not any issue, because at the beginning of hvs_close_connection(), the refcnt is still 4. The issue can be resolved if an extra reference is taken when the connection is established. Fixes: a9eeb998 ("hv_sock: Add support for delayed close") Signed-off-by:
Dexuan Cui <decui@microsoft.com> Reviewed-by:
Sunil Muthuswamy <sunilmut@microsoft.com> Signed-off-by:
-
- Aug 01, 2019
-
-
Taras Kondratiuk authored
Commit 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") broke older tipc tools that use compat interface (e.g. tipc-config from tipcutils package): % tipc-config -p operation not supported The commit started to reject TIPC netlink compat messages that do not have attributes. It is too restrictive because some of such messages are valid (they don't need any arguments): % grep 'tx none' include/uapi/linux/tipc_config.h #define TIPC_CMD_NOOP 0x0000 /* tx none, rx none */ #define TIPC_CMD_GET_MEDIA_NAMES 0x0002 /* tx none, rx media_name(s) */ #define TIPC_CMD_GET_BEARER_NAMES 0x0003 /* tx none, rx bearer_name(s) */ #define TIPC_CMD_SHOW_PORTS 0x0006 /* tx none, rx ultra_string */ #define TIPC_CMD_GET_REMOTE_MNG 0x4003 /* tx none, rx unsigned */ #define TIPC_CMD_GET_MAX_PORTS 0x4004 /* tx none, rx unsigned */ #define TIPC_CMD_GET_NETID 0x400B /* tx none, rx unsigned */ #define TIPC_CMD_NOT_NET_ADMIN 0xC001 /* tx none, rx none */ This patch relaxes the original fix and rejects messages without arguments only if such arguments are expected by a command (reg_type is non zero). Fixes: 2753ca5d ("tipc: fix uninit-value in tipc_nl_compat_doit") Cc: stable@vger.kernel.org Signed-off-by:
Taras Kondratiuk <takondra@cisco.com> Acked-by:
Ying Xue <ying.xue@windriver.com> Signed-off-by:
-
- Jul 31, 2019
-
-
Nikolay Aleksandrov authored
When permanent entries were introduced by the commit below, they were exempt from timing out and thus igmp leave wouldn't affect them unless fast leave was enabled on the port which was added before permanent entries existed. It shouldn't matter if fast leave is enabled or not if the user added a permanent entry it shouldn't be deleted on igmp leave. Before: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show $ After: $ echo 1 > /sys/class/net/eth4/brport/multicast_fast_leave $ bridge mdb add dev br0 port eth4 grp 229.1.1.1 permanent $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent < join and leave 229.1.1.1 on eth4 > $ bridge mdb show dev br0 port eth4 grp 229.1.1.1 permanent Fixes: ccb1c31a ("bridge: add flags to distinguish permanent mdb entires") Signed-off-by:
-
- Jul 30, 2019
-
-
Arnd Bergmann authored
Support for handling the PPPOEIOCSFWD ioctl in compat mode was added in linux-2.5.69 along with hundreds of other commands, but was always broken sincen only the structure is compatible, but the command number is not, due to the size being sizeof(size_t), or at first sizeof(sizeof((struct sockaddr_pppox)), which is different on 64-bit architectures. Guillaume Nault adds: And the implementation was broken until 2016 (see 29e73269 ("pppoe: fix reference counting in PPPoE proxy")), and nobody ever noticed. I should probably have removed this ioctl entirely instead of fixing it. Clearly, it has never been used. Fix it by adding a compat_ioctl handler for all pppoe variants that translates the command number and then calls the regular ioctl function. All other ioctl commands handled by pppoe are compatible between 32-bit and 64-bit, and require compat_ptr() conversion. This should apply to all stable kernels. Acked-by:
Guillaume Nault <g.nault@alphalink.fr> Signed-off-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
-
Jon Maloy authored
Our test suite somtimes provokes the following crash: Description of problem: [ 1092.597234] BUG: unable to handle kernel NULL pointer dereference at 00000000000000e8 [ 1092.605072] PGD 0 P4D 0 [ 1092.607620] Oops: 0000 [#1] SMP PTI [ 1092.611118] CPU: 37 PID: 0 Comm: swapper/37 Kdump: loaded Not tainted 4.18.0-122.el8.x86_64 #1 [ 1092.619724] Hardware name: Dell Inc. PowerEdge R740/08D89F, BIOS 1.3.7 02/08/2018 [ 1092.627215] RIP: 0010:tipc_mcast_filter_msg+0x93/0x2d0 [tipc] [ 1092.632955] Code: 0f 84 aa 01 00 00 89 cf 4d 01 ca 4c 8b 26 c1 ef 19 83 e7 0f 83 ff 0c 4d 0f 45 d1 41 8b 6a 10 0f cd 4c 39 e6 0f 84 81 01 00 00 <4d> 8b 9c 24 e8 00 00 00 45 8b 13 41 0f ca 44 89 d7 c1 ef 13 83 e7 [ 1092.651703] RSP: 0018:ffff929e5fa83a18 EFLAGS: 00010282 [ 1092.656927] RAX: ffff929e3fb38100 RBX: 00000000069f29ee RCX: 00000000416c0045 [ 1092.664058] RDX: ffff929e5fa83a88 RSI: ffff929e31a28420 RDI: 0000000000000000 [ 1092.671209] RBP: 0000000029b11821 R08: 0000000000000000 R09: ffff929e39b4407a [ 1092.678343] R10: ffff929e39b4407a R11: 0000000000000007 R12: 0000000000000000 [ 1092.685475] R13: 0000000000000001 R14: ffff929e3fb38100 R15: ffff929e39b4407a [ 1092.692614] FS: 0000000000000000(0000) GS:ffff929e5fa80000(0000) knlGS:0000000000000000 [ 1092.700702] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 1092.706447] CR2: 00000000000000e8 CR3: 000000031300a004 CR4: 00000000007606e0 [ 1092.713579] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 1092.720712] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 1092.727843] PKRU: 55555554 [ 1092.730556] Call Trace: [ 1092.733010] <IRQ> [ 1092.735034] tipc_sk_filter_rcv+0x7ca/0xb80 [tipc] [ 1092.739828] ? __kmalloc_node_track_caller+0x1cb/0x290 [ 1092.744974] ? dev_hard_start_xmit+0xa5/0x210 [ 1092.749332] tipc_sk_rcv+0x389/0x640 [tipc] [ 1092.753519] tipc_sk_mcast_rcv+0x23c/0x3a0 [tipc] [ 1092.758224] tipc_rcv+0x57a/0xf20 [tipc] [ 1092.762154] ? ktime_get_real_ts64+0x40/0xe0 [ 1092.766432] ? tpacket_rcv+0x50/0x9f0 [ 1092.770098] tipc_l2_rcv_msg+0x4a/0x70 [tipc] [ 1092.774452] __netif_receive_skb_core+0xb62/0xbd0 [ 1092.779164] ? enqueue_entity+0xf6/0x630 [ 1092.783084] ? kmem_cache_alloc+0x158/0x1c0 [ 1092.787272] ? __build_skb+0x25/0xd0 [ 1092.790849] netif_receive_skb_internal+0x42/0xf0 [ 1092.795557] napi_gro_receive+0xba/0xe0 [ 1092.799417] mlx5e_handle_rx_cqe+0x83/0xd0 [mlx5_core] [ 1092.804564] mlx5e_poll_rx_cq+0xd5/0x920 [mlx5_core] [ 1092.809536] mlx5e_napi_poll+0xb2/0xce0 [mlx5_core] [ 1092.814415] ? __wake_up_common_lock+0x89/0xc0 [ 1092.818861] net_rx_action+0x149/0x3b0 [ 1092.822616] __do_softirq+0xe3/0x30a [ 1092.826193] irq_exit+0x100/0x110 [ 1092.829512] do_IRQ+0x85/0xd0 [ 1092.832483] common_interrupt+0xf/0xf [ 1092.836147] </IRQ> [ 1092.838255] RIP: 0010:cpuidle_enter_state+0xb7/0x2a0 [ 1092.843221] Code: e8 3e 79 a5 ff 80 7c 24 03 00 74 17 9c 58 0f 1f 44 00 00 f6 c4 02 0f 85 d7 01 00 00 31 ff e8 a0 6b ab ff fb 66 0f 1f 44 00 00 <48> b8 ff ff ff ff f3 01 00 00 4c 29 f3 ba ff ff ff 7f 48 39 c3 7f [ 1092.861967] RSP: 0018:ffffaa5ec6533e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffffdd [ 1092.869530] RAX: ffff929e5faa3100 RBX: 000000fe63dd2092 RCX: 000000000000001f [ 1092.876665] RDX: 000000fe63dd2092 RSI: 000000003a518aaa RDI: 0000000000000000 [ 1092.883795] RBP: 0000000000000003 R08: 0000000000000004 R09: 0000000000022940 [ 1092.890929] R10: 0000040cb0666b56 R11: ffff929e5faa20a8 R12: ffff929e5faade78 [ 1092.898060] R13: ffffffffb59258f8 R14: 000000fe60f3228d R15: 0000000000000000 [ 1092.905196] ? cpuidle_enter_state+0x92/0x2a0 [ 1092.909555] do_idle+0x236/0x280 [ 1092.912785] cpu_startup_entry+0x6f/0x80 [ 1092.916715] start_secondary+0x1a7/0x200 [ 1092.920642] secondary_startup_64+0xb7/0xc0 [...] The reason is that the skb list tipc_socket::mc_method.deferredq only is initialized for connectionless sockets, while nothing stops arriving multicast messages from being filtered by connection oriented sockets, with subsequent access to the said list. We fix this by initializing the list unconditionally at socket creation. This eliminates the crash, while the message still is dropped further down in tipc_sk_filter_rcv() as it should be. Reported-by:
Li Shuang <shuali@redhat.com> Signed-off-by:
Jon Maloy <jon.maloy@ericsson.com> Reviewed-by:
Xin Long <lucien.xin@gmail.com> Signed-off-by:
-
David Howells authored
Fix the fact that a notification isn't sent to the recvmsg side to indicate a call failed when sendmsg() fails to transmit a DATA packet with the error ENETUNREACH, EHOSTUNREACH or ECONNREFUSED. Without this notification, the afs client just sits there waiting for the call to complete in some manner (which it's not now going to do), which also pins the rxrpc call in place. This can be seen if the client has a scope-level IPv6 address, but not a global-level IPv6 address, and we try and transmit an operation to a server's IPv6 address. Looking in /proc/net/rxrpc/calls shows completed calls just sat there with an abort code of RX_USER_ABORT and an error code of -ENETUNREACH. Fixes: c54e43d7 ("rxrpc: Fix missing start of call timeout") Signed-off-by:
David Howells <dhowells@redhat.com> Reviewed-by:
Marc Dionne <marc.dionne@auristor.com> Reviewed-by:
Jeffrey Altman <jaltman@auristor.com>
-
David Howells authored
There is a potential deadlock in rxrpc_peer_keepalive_dispatch() whereby rxrpc_put_peer() is called with the peer_hash_lock held, but if it reduces the peer's refcount to 0, rxrpc_put_peer() calls __rxrpc_put_peer() - which the tries to take the already held lock. Fix this by providing a version of rxrpc_put_peer() that can be called in situations where the lock is already held. The bug may produce the following lockdep report: ============================================ WARNING: possible recursive locking detected 5.2.0-next-20190718 #41 Not tainted -------------------------------------------- kworker/0:3/21678 is trying to acquire lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: __rxrpc_put_peer /net/rxrpc/peer_object.c:415 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_put_peer+0x2d3/0x6a0 /net/rxrpc/peer_object.c:435 but task is already holding lock: 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: spin_lock_bh /./include/linux/spinlock.h:343 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_dispatch /net/rxrpc/peer_event.c:378 [inline] 00000000aa5eecdf (&(&rxnet->peer_hash_lock)->rlock){+.-.}, at: rxrpc_peer_keepalive_worker+0x6b3/0xd02 /net/rxrpc/peer_event.c:430 Fixes: 330bdcfa ("rxrpc: Fix the keepalive generator [ver #2]") Reported-by:<syzbot+72af434e4b3417318f84@syzkaller.appspotmail.com> Signed-off-by:
-
Johannes Berg authored
Revert this for now, it has been reported multiple times that it completely breaks connectivity on various devices. Cc: stable@vger.kernel.org Fixes: 8dbb000e ("mac80211: set NETIF_F_LLTX when using intermediate tx queues") Reported-by:
Jean Delvare <jdelvare@suse.de> Reported-by:
Peter Lebbing <peter@digitalbrains.com> Signed-off-by:
Johannes Berg <johannes.berg@intel.com>
-
Florian Westphal authored
ebtables doesn't include the base chain policies in the rule count, so we need to add them manually when we call into the x_tables core to allocate space for the comapt offset table. This lead syzbot to trigger: WARNING: CPU: 1 PID: 9012 at net/netfilter/x_tables.c:649 xt_compat_add_offset.cold+0x11/0x36 net/netfilter/x_tables.c:649 Reported-by:
<syzbot+276ddebab3382bbf72db@syzkaller.appspotmail.com> Fixes: 2035f3ff ("netfilter: ebtables: compat: un-break 32bit setsockopt when no rules are present") Signed-off-by:
Florian Westphal <fw@strlen.de> Signed-off-by:
Pablo Neira Ayuso <pablo@netfilter.org>
-
- Jul 29, 2019
-
-
Enrico Weigelt authored
IS_ERR() already calls unlikely(), so this extra unlikely() call around IS_ERR() is not needed. Signed-off-by:
Enrico Weigelt <info@metux.net> Acked-by:
Marcelo Ricardo Leitner <marcelo.leitner@gmail.com> Signed-off-by:
-
Jozsef Kadlecsik authored
Shijie Luo reported that when stress-testing ipset with multiple concurrent create, rename, flush, list, destroy commands, it can result ipset <version>: Broken LIST kernel message: missing DATA part! error messages and broken list results. The problem was the rename operation was not properly handled with respect of listing. The patch fixes the issue. Reported-by:
Shijie Luo <luoshijie1@huawei.com> Signed-off-by:
Jozsef Kadlecsik <kadlec@netfilter.org>
-
Stefano Brivio authored
In commit 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I added to the KADT functions for sets matching on MAC addreses the copy of source or destination MAC address depending on the configured match. This was done correctly for hash:mac, but for hash:ip,mac and bitmap:ip,mac, copying and pasting the same code block presents an obvious problem: in these two set types, the MAC address is the second dimension, not the first one, and we are actually selecting the MAC address depending on whether the first dimension (IP address) specifies source or destination. Fix this by checking for the IPSET_DIM_TWO_SRC flag in option flags. This way, mixing source and destination matches for the two dimensions of ip,mac set types works as expected. With this setup: ip netns add A ip link add veth1 type veth peer name veth2 netns A ip addr add 192.0.2.1/24 dev veth1 ip -net A addr add 192.0.2.2/24 dev veth2 ip link set veth1 up ip -net A link set veth2 up dst=$(ip netns exec A cat /sys/class/net/veth2/address) ip netns exec A ipset create test_bitmap bitmap:ip,mac range 192.0.0.0/16 ip netns exec A ipset add test_bitmap 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_bitmap src,dst -j DROP ip netns exec A ipset create test_hash hash:ip,mac ip netns exec A ipset add test_hash 192.0.2.1,${dst} ip netns exec A iptables -A INPUT -m set ! --match-set test_hash src,dst -j DROP ipset correctly matches a test packet: # ping -c1 192.0.2.2 >/dev/null # echo $? 0 Reported-by:
Chen Yi <yiche@redhat.com> Fixes: 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets") Signed-off-by:
Stefano Brivio <sbrivio@redhat.com> Signed-off-by:
-
Stefano Brivio authored
In commit 8cc4ccf5 ("ipset: Allow matching on destination MAC address for mac and ipmac sets"), ipset.git commit 1543514c46a7, I removed the KADT check that prevents matching on destination MAC addresses for hash:mac sets, but forgot to remove the same check for hash:ip,mac set. Drop this check: functionality is now commented in man pages and there's no reason to restrict to source MAC address matching anymore. Reported-by:
-
Jiri Pirko authored
Commit aca51397 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") introduced a possibility to hit a BUG in case device is returning back to init_net and two following conditions are met: 1) dev->ifindex value is used in a name of another "dev%d" device in init_net. 2) dev->name is used by another device in init_net. Under real life circumstances this is hard to get. Therefore this has been present happily for over 10 years. To reproduce: $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 3: enp0s2: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip netns add ns1 $ ip -n ns1 link add dummy1ns1 type dummy $ ip -n ns1 link add dummy2ns1 type dummy $ ip link set enp0s2 netns ns1 $ ip -n ns1 link set enp0s2 name dummy0 [ 100.858894] virtio_net virtio0 dummy0: renamed from enp0s2 $ ip link add dev4 type dummy $ ip -n ns1 a 1: lo: <LOOPBACK> mtu 65536 qdisc noop state DOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 2: dummy1ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 16:63:4c:38:3e:ff brd ff:ff:ff:ff:ff:ff 3: dummy2ns1: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether aa:9e:86:dd:6b:5d brd ff:ff:ff:ff:ff:ff 4: dummy0: <BROADCAST,MULTICAST> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 52:54:00:12:34:56 brd ff:ff:ff:ff:ff:ff $ ip a 1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group default qlen 1000 link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00 inet 127.0.0.1/8 scope host lo valid_lft forever preferred_lft forever inet6 ::1/128 scope host valid_lft forever preferred_lft forever 2: dummy0: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 86:89:3f:86:61:29 brd ff:ff:ff:ff:ff:ff 4: dev4: <BROADCAST,NOARP> mtu 1500 qdisc noop state DOWN group default qlen 1000 link/ether 5a:e1:4a:b6:ec:f8 brd ff:ff:ff:ff:ff:ff $ ip netns del ns1 [ 158.717795] default_device_exit: failed to move dummy0 to init_net: -17 [ 158.719316] ------------[ cut here ]------------ [ 158.720591] kernel BUG at net/core/dev.c:9824! [ 158.722260] invalid opcode: 0000 [#1] SMP KASAN PTI [ 158.723728] CPU: 0 PID: 56 Comm: kworker/u2:1 Not tainted 5.3.0-rc1+ #18 [ 158.725422] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.12.0-2.fc30 04/01/2014 [ 158.727508] Workqueue: netns cleanup_net [ 158.728915] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.730683] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.736854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.738752] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.741369] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.743418] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.745626] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.748405] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.750638] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.752944] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.755245] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.757654] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.760012] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 [ 158.762758] Call Trace: [ 158.763882] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.766148] ? devlink_nl_cmd_set_doit+0x520/0x520 [ 158.768034] ? dev_change_net_namespace+0xbb0/0xbb0 [ 158.769870] ops_exit_list.isra.0+0xa8/0x150 [ 158.771544] cleanup_net+0x446/0x8f0 [ 158.772945] ? unregister_pernet_operations+0x4a0/0x4a0 [ 158.775294] process_one_work+0xa1a/0x1740 [ 158.776896] ? pwq_dec_nr_in_flight+0x310/0x310 [ 158.779143] ? do_raw_spin_lock+0x11b/0x280 [ 158.780848] worker_thread+0x9e/0x1060 [ 158.782500] ? process_one_work+0x1740/0x1740 [ 158.784454] kthread+0x31b/0x420 [ 158.786082] ? __kthread_create_on_node+0x3f0/0x3f0 [ 158.788286] ret_from_fork+0x3a/0x50 [ 158.789871] ---[ end trace defd6c657c71f936 ]--- [ 158.792273] RIP: 0010:default_device_exit.cold+0x1d/0x1f [ 158.795478] Code: 84 e8 18 c9 3e fe 0f 0b e9 70 90 ff ff e8 36 e4 52 fe 89 d9 4c 89 e2 48 c7 c6 80 d6 25 84 48 c7 c7 20 c0 25 84 e8 f4 c8 3e [ 158.804854] RSP: 0018:ffff8880347e7b90 EFLAGS: 00010282 [ 158.807865] RAX: 000000000000003b RBX: 00000000ffffffef RCX: 0000000000000000 [ 158.811794] RDX: 0000000000000000 RSI: ffffffff8128013d RDI: ffffed10068fcf64 [ 158.816652] RBP: ffff888033550170 R08: 000000000000003b R09: fffffbfff0b94b9c [ 158.820930] R10: fffffbfff0b94b9b R11: ffffffff85ca5cdf R12: ffff888032f28000 [ 158.825113] R13: dffffc0000000000 R14: ffff8880335501b8 R15: 1ffff110068fcf72 [ 158.829899] FS: 0000000000000000(0000) GS:ffff888036000000(0000) knlGS:0000000000000000 [ 158.834923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 158.838164] CR2: 00007fe8b45d21d0 CR3: 00000000340b4005 CR4: 0000000000360ef0 [ 158.841917] DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000 [ 158.845149] DR3: 0000000000000000 DR6: 00000000fffe0ff0 DR7: 0000000000000400 Fix this by checking if a device with the same name exists in init_net and fallback to original code - dev%d to allocate name - in case it does. This was found using syzkaller. Fixes: aca51397 ("netns: Fix arbitrary net_device-s corruptions on net_ns stop.") Signed-off-by:
Jiri Pirko <jiri@mellanox.com> Signed-off-by:
-
Gustavo A. R. Silva authored
Mark switch cases where we are expecting to fall through. This patch fixes the following warnings: net/iucv/af_iucv.c: warning: this statement may fall through [-Wimplicit-fallthrough=]: => 537:3, 519:6, 2246:6, 510:6 Notice that, in this particular case, the code comment is modified in accordance with what GCC is expecting to find. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Gustavo A. R. Silva <gustavo@embeddedor.com> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
Nikolay Aleksandrov authored
On initialization failure we have to delete the local fdb which was inserted due to the default pvid creation. This problem has been present since the inception of default_pvid. Note that currently there are 2 cases: 1) in br_dev_init() when br_multicast_init() fails 2) if register_netdevice() fails after calling ndo_init() This patch takes care of both since br_vlan_flush() is called on both occasions. Also the new fdb delete would be a no-op on normal bridge device destruction since the local fdb would've been already flushed by br_dev_delete(). This is not an issue for ports since nbp_vlan_init() is called last when adding a port thus nothing can fail after it. Reported-by:
<syzbot+88533dc8b582309bf3ee@syzkaller.appspotmail.com> Fixes: 5be5a2df ("bridge: Add filtering support for default_pvid") Signed-off-by:
-
Jia-Ju Bai authored
In dequeue_func(), there is an if statement on line 74 to check whether skb is NULL: if (skb) When skb is NULL, it is used on line 77: prefetch(&skb->end); Thus, a possible null-pointer dereference may occur. To fix this bug, skb->end is used when skb is not NULL. This bug is found by a static analysis tool STCheck written by us. Fixes: 76e3cc12 ("codel: Controlled Delay AQM") Signed-off-by:Jia-Ju Bai <baijiaju1990@gmail.com> Reviewed-by:
-
Brian Norris authored
In a very similar spirit to commit c470bdc1 ("mac80211: don't WARN on bad WMM parameters from buggy APs"), an AP may not transmit a fully-formed WMM IE. For example, it may miss or repeat an Access Category. The above loop won't catch that and will instead leave one of the four ACs zeroed out. This triggers the following warning in drv_conf_tx() wlan0: invalid CW_min/CW_max: 0/0 and it may leave one of the hardware queues unconfigured. If we detect such a case, let's just print a warning and fall back to the defaults. Tested with a hacked version of hostapd, intentionally corrupting the IEs in hostapd_eid_wmm(). Cc: stable@vger.kernel.org Signed-off-by:
Brian Norris <briannorris@chromium.org> Link: https://lore.kernel.org/r/20190726224758.210953-1-briannorris@chromium.org Signed-off-by:
-
- Jul 27, 2019
-
-
Jia-Ju Bai authored
In rds_rdma_cm_event_handler_cmn(), there are some if statements to check whether conn is NULL, such as on lines 65, 96 and 112. But conn is not checked before being used on line 108: trans->cm_connect_complete(conn, event); and on lines 140-143: rdsdebug("DISCONNECT event - dropping connection " "%pI6c->%pI6c\n", &conn->c_laddr, &conn->c_faddr); rds_conn_drop(conn); Thus, possible null-pointer dereferences may occur. To fix these bugs, conn is checked before being used. These bugs are found by a static analysis tool STCheck written by us. Signed-off-by:Santosh Shilimkar <santosh.shilimkar@oracle.com> Signed-off-by:
-
