The Only use of PCI device enumeration here is to get the PMC base address
which is a fixed value i.e. 0xFE000000. On some platforms this can be read
through a non standard PCI BAR. But after Kabylake, PMC is not exposed as a
PCI device anymore. There are other non standard methods like ACPI LPIT
which can also be used for obtaining this value.

For simplicity, this value can be hardcoded as it won't change.

Since we don't have a PMC PCI device on any platform after Kabylake, this
creates a foundation for future SoC support.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

When on a platform if we can't show MPHY and PLL status, don't even bother
to create a debugfs entry as it will fail anyway. In fact unless OEM builds
a special BIOS for test, it will fail on every production system.

This will help to add future platform support where we can't support these
entries.

Suggested-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The class/select were mistakenly put into octal notation but
intended to be in decimal notation.

Suggested-by: Pali Rohar <pali.rohar@gmail.com>
Signed-off-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

SMBIOS 3.0.0 Specification introduced new Chassis Types field values for
2-in-1 devices like tablets, convertibles and detachables. Dell's
Inspiron 2-in-1 and XPS 2-in-1 fall into this category and they have to
be added to the DMI whitelist, so rfkill and backlight can be controlled
for them as for other laptops.

Signed-off-by: Alexander Abrosimov <alexander.n.abrosimov@gmail.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add touchscreen platform data for the Teclast X3 Plus tablet.

Reviewed-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Alberto Ponces <ponces26@gmail.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

This patch prevents the thinkpad_acpi driver from warning about 2 event
codes returned for keyboard palm-detection. No behavioral changes,
other than suppressing the warning in the kernel log. The events are
still forwarded via acpi-netlink channels.

We could, optionally, decide to forward the event through a
input-switch on the tpacpi input device. However, so far no suitable
input-code exists, and no similar drivers report such events. Hence,
leave it an acpi event for now.

Note that the event-codes are named based on empirical studies. On the
ThinkPad X1 5th Gen the sensor can be found underneath the arrow key.

Cc: Matthew Thode <mthode@mthode.org>
Signed-off-by: David Herrmann <dh.herrmann@gmail.com>
Acked-by: Henrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Some versions of the Trekstor Surftab 7.0 ship with a newer BIOS which uses
different DMI strings.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

On some Dell XPS models WMI events of type 0x0000 reporting a keycode of
0xe00c get reported when the brightness of the LCD panel changes.

This leads to us reporting false-positive kbd_led change events to
userspace which in turn leads to the kbd backlight OSD showing when it
should not.

We already read the current keyboard backlight brightness value when
reporting events because the led_classdev_notify_brightness_hw_changed
API requires this. Compare this value to the last known value and filter
out duplicate events, fixing this.

Note the fixed issue is esp. a problem on XPS models with an ambient light
sensor and automatic brightness adjustments turned on, this causes the kbd
backlight OSD to show all the time there.

BugLink: https://bugzilla.redhat.com/show_bug.cgi?id=1514969


Fixes: 9c656b07 ("platform/x86: dell-*: Call new led hw_changed API ...")
Acked-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This adds list of supported features by this driver to the Kconfig.

Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Symbolic permissions 'S_IRUGO' are not preferred. This patch changes the
debugfs files to use octal permissions '0644' or '0444' as needed by the
attribute.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Allow the driver to be a module since builtin_pci_driver funtionality is no
longer needed.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fix invalid field information and add missing fields in kernel doc comments.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

base_address field is redundant and unused in the driver so get rid of it.

Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Though ChromeOs uses the exported API as part of their S0ix failsafe
mechanism, there is no active consumer of this API in upstream kernel.

We can revisit this when ChromeOs kernel team is able to get their S0ix
failsafe framework in mainline.

Cc: Derek Basehore <dbasehore@chromium.org>
Cc: Rajat Jain <rajatja@google.com>
Link: https://patchwork.kernel.org/patch/9831229/



Suggested-by: Andriy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Srinivas Pandruvada <srinivas.pandruvada@linux.intel.com>
Signed-off-by: Rajneesh Bhardwaj <rajneesh.bhardwaj@intel.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Drivers should not 'select' a subsystem. Instead they should depend
on it. If the subsystem is disabled, the user probably did that for
a purpose and one driver shouldn't be changing that.

This also makes all platform/x86/ drivers consistent w.r.t depending on
INPUT instead of selecting it.

Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: Andy Shevchenko <andy@infradead.org>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Lenovo Legion Y720-15IKB is another Lenovo model without a
hw rfkill switch, resulting in wifi always reported as hard
blocked.

Add the model to the list of models without rfkill switch.

Signed-off-by: Olle Liljenzin <olle@liljenzin.se>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Calling acpi_wmi_init() at the subsys_initcall() level causes ordering
issues to appear on some systems and they are difficult to reproduce,
because there is no guaranteed ordering between subsys_initcall()
calls, so they may occur in different orders on different systems.

In particular, commit 86d9f485 (mm/slab: fix kmemcg cache
creation delayed issue) exposed one of these issues where genl_init()
and acpi_wmi_init() are both called at the same initcall level, but
the former must run before the latter so as to avoid a NULL pointer
dereference.

For this reason, move the acpi_wmi_init() invocation to the
initcall_sync level which should still be early enough for things
to work correctly in the WMI land.

Link: https://marc.info/?t=151274596700002&r=1&w=2


Reported-by: Jonathan McDowell <noodles@earth.li>
Reported-by: Joonsoo Kim <iamjoonsoo.kim@lge.com>
Tested-by: Jonathan McDowell <noodles@earth.li>
Signed-off-by: Rafael J. Wysocki <rafael.j.wysocki@intel.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add touchscreen platform data for the Teclast X98 Plus II tablet.

Signed-off-by: Paul Cercueil <paul@crapouillou.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Add touchscreen platform data for the Trekstor Primebook C13 laptop.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Fixes the following sparse warnings:

drivers/platform/x86/dell-laptop.c:289:6: warning:
 symbol 'dell_set_arguments' was not declared. Should it be static?
drivers/platform/x86/dell-laptop.c:298:5: warning:
 symbol 'dell_send_request' was not declared. Should it be static?

Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add a driver for the GPD pocket device's custom fan controller, which
gets controlled through 2 GPIOs listed in a FAN02501 ACPI device.

Cc: James <kernel@madingley.org>
Suggested-by: James <kernel@madingley.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

On the X1 Yoga 2nd Generation and most likely other notebooks the FLAT
mode is reported. Decode it correctly rather than warning about an
unexpected multi mode status to be reported.

Signed-off-by: Benjamin Berg <bberg@redhat.com>
Cc: Peter FP1 Zhang <zhangfp1@lenovo.com
Cc: Lyude <lyude@redhat.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

The Dell Latitude 5495 has the mic mute key.

Signed-off-by: Shih-Yuan Lee (FourDollars) <sylee@canonical.com>
Reviewed-by: Pali Rohár <pali.rohar@gmail.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This macro deduplicates a lot of similar code in the pmc_atom.c module.
Targeting to be moved to seq_file.h eventually.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add touchscreen platform data for the Chuwi Vi8 tablet.

Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

This commit add entry for Chuwi Hi8 tablet.

Signed-off-by: Shohei Maruyama <cheat.sc.linux@outlook.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add touchscreen platform data for the Onda oBook 20 Plus tablet.

Firmware for this is available here:
https://github.com/onitake/gsl-firmware/blob/master/firmware/linux/silead/gsl3676-onda-obook-20-plus.fw



Signed-off-by: Nerijus Baliūnas <nerijus@users.sourceforge.net>
Acked-by: Hans de Goede <hdegoede@redhat.com>
[andy: massaged title and wrote commit message]
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

Add touchscreen info for the Trekstor SurfTab twin 10.1 ST10432-8
tablet. Resolution based on output of evemu-record.

Signed-off-by: Bernhard Übelacker <bernhardu@mailbox.org>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>

HEBC method reports capabilities of 5 button array but Wacom
MobileStudio Pro does not have this control method. A DMI quirk
was created to enable 5 button array for this system.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=197991



Reported-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Alex Hung <alex.hung@canonical.com>
Tested-by: Jason Gerecke <jason.gerecke@wacom.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

This allocation won't fail in the current kernel because it's small but
not checking for kmalloc() failures introduces static checker warnings
so let's fix it.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Mario Limonciello <mario.limonciello@dell.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Sending the switch state change twice within the same frame is invalid
evdev protocol and only works if the client handles keys immediately as
well. Processing events immediately is incorrect, it forces a fake
order of events that does not exist on the device.

Recent versions of libinput changed to only process the device state and
SYN_REPORT time, so now the key event is lost.

https://bugs.freedesktop.org/show_bug.cgi?id=104041



Signed-off-by: Peter Hutterer <peter.hutterer@who-t.net>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Update the tree listed for X86 PLATFORM DRIVERS to its new top level
reposority at infradead. The old one is an alias to the new one, but
we prefer to remove the "user/dvhart" from the URL.

Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

This model does not have a hardware rfkill switch, add it to the
no_hw_rfkill_list to prevent the radio always being blocked.

Reported-by: Roger Jargoyhen <rjargoyhen@gmail.com>
Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Address the following  checkpatch warning by using __func__ instead:
WARNING: Prefer using '"%s...", __func__' to using 'write_ec_cmd',
this function's name, in a string

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

Address the following checkpatch warning by removing unnecessary else
blocks:
WARNING: else is not generally useful after a break or return

Signed-off-by: Jiaxun Yang <jiaxun.yang@flygoat.com>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The new notify_handler logic determining if autorelease should be used or
not is a bit awkward, and can result in more than one call to
sparse_keymap_report_event for the same event (scancode). The nesting
and long lines also made it difficult to read.

Simplify the logic by eliminating a level of nesting with a goto and
always calculate autorelease and val so we can make a single call to
sparse_keymap_report_event.

Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>
Reviewed-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Tested-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Cc: AceLan Kao <acelan.kao@canonical.com>

The Lenovo Helix 2 and Dell XPS 12 (9Q33) have an extra button on the
front showing a 'Windows' logo, both reporting event codes 0xC2/0xC3
on press/release. On the Dell, both press/release are distinct events
while on the Helix 2 both events are generated on release.

Tested on XPS 12, for info on the Helix 2 see:
https://www.spinics.net/lists/ibm-acpi-devel/msg03982.html



Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The Rotate Lock button event is emitted on the XPS 12 (BIOS A8, but not
on BIOS A2).

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>

The key has the same use as the SW_ROTATE_LOCK, but is used on devices
where the state is not tracked by the hardware but has to be handled
in software.

Signed-off-by: Stefan Brüns <stefan.bruens@rwth-aachen.de>
Signed-off-by: Darren Hart (VMware) <dvhart@infradead.org>