- Sep 12, 2005
-
-
Greg Ungerer authored
Add support for the FEC ethernet driver of the Freescale 523x processor family to the FEC header definitions. Signed-off-by:
Greg Ungerer <gerg@uclinux.com> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Greg Ungerer authored
We should not call mtd_put_device() in the uclinux MTD map driver. Also consistently use phys/virt fields of maps map_info struct, instead of mixing it with map_priv_1. Signed-off-by:
-
Greg Ungerer authored
Add support for the new Freescale 523x processor family to ColdFire serial driver. Also set different default baud rate for MOD5272 board. Signed-off-by:
-
Greg Ungerer authored
A few improvements to the Freescale/ColdFire FEC driver: . some formatting cleanups . add support for the FEC device in the ColdFire 523x processor family . add support for MAC address setting on MOD5272 and M5272C3 boards . don't re-read the PHY status register many times . ack status interrupt before reading status register . move printing init message to after full init (so that the ethX name is filled out for printing) Some parts of this patch submitted by Philippe De Muyter <phdm@macqel.be> Signed-off-by:
-
Greg Ungerer authored
Add configuration support for the FEC ethernet controller in the Freescale 523x processor family. Also add and option to configure the second FEC controller on some Freescale processors. Signed-off-by:
-
- Sep 11, 2005
-
-
Willy Tarreau authored
This ports the Sun GEM ROM mapping/enable fixes it sunhme (which used the same PCI ROM mapping code). Without this, I get NULL MAC addresses for all 4 ports (it's a SUN QFE). With it, I get the correct addresses (the ones printed on the label on the card). Signed-off-by: -
Linus Torvalds authored
This same patch was reported to fix the MAC address detection on sunhme (next patch). Most people seem to be running this on Sparcs or PPC machines, where we get the MAC address from their respective firmware rather than from the (previously broken) ROM mapping routines. Signed-off-by: -
Linus Torvalds authored
This is one heck of a confused driver. It uses a byte write to a dword register to enable a ROM resource that it doesn't even seem to be using. "Lost and wandering in the desert of confusion" Signed-off-by: -
Pavel Machek authored
These are small ucb1x00-ts cleanups, as suggested by Vojtech, Dmitri and the lists. Signed-off-by:
Pavel Machek <pavel@suse.cz> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk>
-
Russell King authored
Add support for Intel assabet specific board support for UCB1200/UCB1300 devices. Signed-off-by: -
Russell King authored
Add support for Philips UCB1200 and UCB1300 touchscreen interfaces found on ARM devices. Signed-off-by: -
Russell King authored
Add the core device support code for the Philips UCB1200 and UCB1300 devices. Also includes the following from Pavel: This fixes u32 vs. pm_message_t confusion and uses cleaner try_to_freeze() [fixing compilation as a side-effect on newer kernels.] Signed-off-by:
-
Alexey Dobriyan authored
Fix drivers/video/nvidia/nv_of.c:34: error: conflicting types for 'nvidia_probe_i2c_connector' drivers/video/nvidia/nv_proto.h:38: error: previous declaration of 'nvidia_probe_i2c_connector' was here Signed-off-by:
Alexey Dobriyan <adobriyan@gmail.com> Acked-by:
Al Viro <viro@ZenIV.linux.org.uk> Acked-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
- Sep 10, 2005
-
-
Al Viro authored
envctrl doesn't need unistd.h; moreover, since it declares errno static gcc4 gets very unhappy about including unistd.h. Signed-off-by:
-
Al Viro authored
Signed-off-by:
-
Jens Axboe authored
The reference count fix merged isn't fully bug free. It doesn't leak now, but instead it crashes due to looking at freed memory. So for now, lets reverse the change and I'll fix it for real next week. Signed-off-by:
Jens Axboe <axboe@suse.de> Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_uninterruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by:
Nishanth Aravamudan <nacc@us.ibm.com> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Also use human-time to jiffies units conversion functions rather than direct HZ division to avoid rounding issues. Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_{un,}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by:Adrian Bunk <bunk@stusta.de> Signed-off-by:
-
Nishanth Aravamudan authored
Use schedule_timeout_{un,}interruptible() instead of set_current_state()/schedule_timeout() to reduce kernel size. Signed-off-by: -
Pavel Machek authored
Remove S4BIOS support. It is pretty useless, and only ever worked for _me_ once. (I do not think anyone else ever tried it). It was in feature-removal for a long time, and it should have been removed before. Signed-off-by:
-
Nishanth Aravamudan authored
Uses msleep() in place of schedule_timeout() to guarantee the task delays as expected. Signed-off-by:
Maximilian Attems <janitor@sternwelten.at> Signed-off-by:
Domen Puncer <domen@coderock.org> Signed-off-by:
-
Nishanth Aravamudan authored
Use msleep() or msleep_interruptible() [as appropriate] instead of schedule_timeout() to gurantee the task delays as expected. As a result changed the units of the timeout variable from jiffies to msecs. Signed-off-by:
-
Domen Puncer authored
s/for/list_for_each/ Signed-off-by:
-
Domen Puncer authored
Removed unused dprintk, replaced PRINTK with pr_debug. Signed-off-by:
-
Nishanth Aravamudan authored
Uses msleep() instead of schedule_timeout() to guarantee the task delays at least the desired time amount. Signed-off-by:
-
Domen Puncer authored
Make code more readable with list_for_each_entry. Signed-off-by:
-
Clemens Buchacher authored
I replaced the custom MIN/MAX macros with the type safe min/max macros from linux/kernel.h. Signed-off-by:
-
Marcelo Feitoza Parisi authored
Use of the time_after() macro, defined at linux/jiffies.h, which deals with wrapping correctly and are nicer to read. Signed-off-by:
Marcelo Feitoza Parisi <marcelo@feitoza.com.br> Signed-off-by:
-
Adrian Bunk authored
This patch contains the most trivial from Rusty's trivial patches: - spelling fixes - remove duplicate includes Signed-off-by:
-
Jesper Juhl authored
This patch does a full cleanup of 'NULL checks before vfree', and a partial cleanup of calls to kfree for all of drivers/ - the kfree bit is partial in that I only did the files that also had vfree calls in them. The patch also gets rid of some redundant (void *) casts of pointers being passed to [vk]free, and a some tiny whitespace corrections also crept in. Signed-off-by:
Jesper Juhl <jesper.juhl@gmail.com> Signed-off-by:
-
Adrian Bunk authored
With gcc -W: drivers/char/hpet.c:102: warning: `inline' is not at beginning of declaration drivers/char/hpet.c:109: warning: `inline' is not at beginning of declaration Signed-off-by:
Jesper Juhl <juhl-lkml@dif.dk> Signed-off-by:
-
Nishanth Aravamudan authored
Replace schedule_timeout() with msleep() to guarantee the task delays as expected. Signed-off-by:
-
Victor Fusco authored
Fix the sparse warning "implicit cast to nocast type" Signed-off-by:
Victor Fusco <victor@cetuc.puc-rio.br> Signed-off-by:
-
Victor Fusco authored
Fix the sparse warning "implicit cast to nocast type" Signed-off-by:
-
Christophe Lucas authored
Signed-off-by:
Christophe Lucas <clucas@rotomalug.org> Signed-off-by:
-
Christophe Lucas authored
Signed-off-by:
-
Christophe Lucas authored
misc_register() can fail. Signed-off-by:
-
Paul Fulghum authored
Add ability to clear statistics. Signed-off-by:
Paul Fulghum <paulkf@microgate.com> Signed-off-by:
-
