These particular files were just assuming that module.h was
somehow in the include paths.  Give them the more minimalist
header file explicitly.

Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>

This flag is a NOOP and can be removed now.

Signed-off-by: Yong Zhang <yong.zhang0@gmail.com>
Acked-by: Bob Liu <lliubbo@kernel.org>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

__kfree_rcu() in rcupdate.h bugs when parameter offset is not a constant
at compile time.  Since we build the kgdb_test module with -O0 and it
includes this header file, we hit the bug.  So drop the -O0 and mark the
one func we need for the test as noinline (so we can set a breakpoint on
it and have it be hit).

Signed-off-by: Sonic Zhang <sonic.zhang@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This allows us to move duplicated code in <asm/atomic.h>
(atomic_inc_not_zero() for now) to <linux/atomic.h>

Signed-off-by: Arun Sharma <asharma@fb.com>
Reviewed-by: Eric Dumazet <eric.dumazet@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: David Miller <davem@davemloft.net>
Cc: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

This patch removes all the module loader hook implementations in the
architecture specific code where the functionality is the same as that
now provided by the recently added default hooks.

Signed-off-by: Jonas Bonn <jonas@southpole.se>
Acked-by: Mike Frysinger <vapier@gentoo.org>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Tested-by: Michal Simek <monstr@monstr.eu>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au>

The bug in the BF526 rom when doing a software reset exists only in older
silicon versions, so don't clear SWRST on newer parts.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Back in commit c03c2a87, we fixed logic in the non-bf54x
GPIO resume code to set the data levels properly before the direction
to avoid spurious line glitches.  But we missed the bf54x code paths.
So add the same fix there.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Re-architect how we save/restore the gpio/port logic that only pertains
to bf538/bf539 parts by pulling it out of the core code paths and pushing
it out to bf538-specific locations.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Don't bind the code to specific CPU defines.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The hardware block uses the name "request" rather than "irq", so update
the struct accordingly.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

For now, this only supports gptimers.  Support for dedicated PWM devices
as found on newer parts to come.

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The alignment is normally handled by PERCPU(), but we need to do it
ourselves in the XIP build due to the custom layout.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Use proper helper macros for reading/writing the MMRs rather than
volatile markings on the struct.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Now that asm/gptimers.h has the hardware register struct layout, there's
no need to duplicate things locally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Passing a non-simple expression in as the addr arg could incorrectly
apply the pointer cast resulting in misbehavior.  Add proper paren.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The address limit is already set in flush_old_exec() so this
set_fs(USER_DS) is redundant.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The documentation for the IMDMA channels appears to be incorrect.
These DMA blocks don't actually have PERIPHERAL_MAP MMRs for us
to access.  Attempts to do so lead to system mmr hardware errors.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This moves the double fault data used at boot time into a single struct
which can then easily be addressed with indexed loads rather than having
to explicitly load multiple addresses.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The documentation is a little iffy as to whether these are actual MMRs,
but reading them on the hardware works, and the previous version of this
logic (the SDH) had PID[4567].  So add it for RSI too.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

This code was mostly developed against a BF54x, so some BF537-specific
issues were missed.

The PPI block starts at PPI_CONTROL, not PPI_STATUS (which is the reverse
of the EPPI block).

The MDMA block starts at MDMA_NEXT_DESC_PTR, not MDMA_CONFIG.  Seems the
sim does not catch misreads here so that'll need to get fixed.

The gptimer block is mostly 32bit regs, not 16bit.  Use the gptimer struct
to figure that out rather than hardcoding it locally.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The Blackfin percpu input sections are outdated, so rather than update
them, drop them completely and use the new common define.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Anomaly 05000480 on BF537 rev 0.0, 0.1, 0.2:
Multiple Simultaneous Urgent DMA Requests May Cause DMA System Instability

Suggested Workaround:
Program the DMA Traffic Control Period to a non-zero value.  This forces
the DMA block to group accesses together rather than allow arbitration for
each piece of data placed on the internal DMA bus.

Signed-off-by: Steven Miao <realmz6@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

->read_proc interface is going away, switch to seq_file.

Signed-off-by: Alexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

old cpu_xxx() APIs is planned to removed later. then, converted.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Every callter (except kthread_bind) should use proper
set_cpus_allowed_ptr() APIs.

Signed-off-by: KOSAKI Motohiro <kosaki.motohiro@jp.fujitsu.com>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Turns out the documentation is wrong and doing "RAISE 1" does not result
in a software reset, only a core reset.  So when the on-chip rom has a
functioning reset helper, use it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Since the value of these MMRs aren't changing, store the value in a local
variable and work off of that.  This avoids multiple MMR reads which are
implicitly forced by the volatile markings.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The BF537 SIC combines the gpio port H mask A interrupts with the
emac rx interrupt, so we need to demux this in software.

It also combines the gpio port H mask B and the emac tx interrupts,
and the watchdog and port F mask B interrupts, but since we don't
support mask B yet, just add the defines for now.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

These are only used in a few internal Blackfin places, so move the irq
prototypes out of the global header and into the internal irq one.  No
functional changes other than shuffling locales.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Not sure when we stopped using this field, but nothing in the tree uses
this now, so punt it.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

After some cache setup reordering changesets, the blackfin_cpudata init
was left behind.  While cpu0's data was correct, cpu1's data was not.
Not that big of a deal as these are only used in the cpuinfo output, but
should still be fixed.  So move the setup of these fields to the common
cache setup function to avoid this happening again in the future.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

The smp flush lines are too long and have too many newlines, so scale
them back to match the other lines.

The %p modifier shows "(null)" for 0, so use %08x instead.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Signed-off-by: Mike Frysinger <vapier@gentoo.org>

Convert some Blackfin architecture's code to using struct syscore_ops
objects for power management instead of sysdev classes and sysdevs.

This simplifies the code and reduces the kernel's memory footprint.
It also is necessary for removing sysdevs from the kernel entirely in
the future.

Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Acked-by: Greg Kroah-Hartman <gregkh@suse.de>
Acked-by: Mike Frysinger <vapier@gentoo.org>

If the period of a gptimer is fairly low, we might miss an interrupt
by acking it too late (we end up acking the new int as well).

Reported-by: Isabelle Leonardi <i.leonardi@detracom.fr>
Signed-off-by: Mike Frysinger <vapier@gentoo.org>