Fixes several Embedded Controller issues, including
button failure and battery status AE_TIME failure.

http://bugzilla.kernel.org/show_bug.cgi?id=3851



Based on patch by: Andi Kleen <ak@suse.de>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Luming Yu <luming.yu@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

	platform_pci_set_power_state()
		and ACPI can answer

http://bugzilla.kernel.org/show_bug.cgi?id=4277



Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

pci_choose_state() can now call
	platform_pci_choose_state()
		and ACPI can answer

http://bugzilla.kernel.org/show_bug.cgi?id=4277



Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

http://bugzilla.kernel.org/show_bug.cgi?id=4277



Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Implement the framework for binding physical devices
with ACPI devices. A physical bus like PCI bus
should create a 'acpi_bus_type', with:

.find_device:
        For device which has parent such as normal PCI devices.

.find_bridge:
        It's for special devices, such as PCI root bridge
	or IDE controller.  Such devices generally haven't a
	parent or ->bus. We use the special method
	to get an ACPI handle.

Uses new field in struct device: firmware_data

http://bugzilla.kernel.org/show_bug.cgi?id=4277



Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

See Documentation/acpi-hotkey.txt

Use cmdline "acpi_specific_hotkey" to enable
legacy platform specific drivers.

http://bugzilla.kernel.org/show_bug.cgi?id=3887



Signed-off-by: Luming Yu <luming.yu@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Drivers should do this:

.suspend()
	pci_disable_device()

.resume()
	pci_enable_device()

http://bugzilla.kernel.org/show_bug.cgi?id=3469



Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Delete PCI Interrupt Link Device .resume method --
it is the device driver's job to request interrupts,
not the Link's job to remember what the devices want.

This addresses the issue of attempting to run
the ACPI interpreter too early in resume, when
interrupts are still disabled.

http://bugzilla.kernel.org/show_bug.cgi?id=3469



Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Free some RAM before entering S3 so that upon
resume we can be sure early allocations will succeed.

http://bugzilla.kernel.org/show_bug.cgi?id=3469



Signed-off-by: David Shaohua Li <shaohua.li@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Register an "acpi" system device to be notified of shutdown preparation.
This depends on CONFIG_PM

http://bugzilla.kernel.org/show_bug.cgi?id=4041



Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Len Brown <len.brown@intel.com>

delete /proc/acpi/button

http://bugzilla.kernel.org/show_bug.cgi?id=1920



Signed-off-by: Alexey Starikovskiy <alexey.y.starikovskiy@intel.com>
Signed-off-by: Len Brown <len.brown@intel.com>

Signed-off-by: Keiichiro Tokunaga <tokunaga.keiich@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Len Brown <len.brown@intel.com>

There are many drivers that have been setting the generic driver
model level shutdown callback, and pci thus must not override it.

Without this patch we can have really bad data loss on various
raid controllers.

Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Do all timer zapping in exit_itimers.

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

__cfq_get_queue().  __cfq_get_queue() finds an existing queue (struct
cfq_queue) of the current process for the device and returns it.  If it's not
found, __cfq_get_queue() creates and returns a new one if __cfq_get_queue() is
called with __GFP_WAIT flag, or __cfq_get_queue() returns NULL (this means that
get_request() fails) if no __GFP_WAIT flag.

On the other hand, in __make_request(), get_request() is called without
__GFP_WAIT flag at the first time.  Thus, the get_request() fails when there is
no existing queue, typically when it's called for the first I/O request of the
process to the device.

Though it will be followed by get_request_wait() for general case,
__make_request() will just end the I/O with an error (EWOULDBLOCK) when the
request was for read-ahead.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Kiyoshi Ueda <k-ueda@ct.jp.nec.com>
Signed-off-by: Jun'ichi Nomura <j-nomura@ce.jp.nec.com>

Patch from Nicolas Pitre

Without this some devices fail to work again after a suspend event.

Signed-off-by: Nicolas Pitre
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The initial IB2 addresses did not depend on the IB2 base. This
patch defines them as (VERSATILE_IB2_BASE + offset).

Signed-off-by: Catalin Marinas
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The GPIO base for Integrator/CP is different from the
Integrator/AP. This patch sets the correct value for
INTEGRATOR_GPIO_BASE.

Signed-off-by: Catalin Marinas
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Patch from Catalin Marinas

The current red and blue colours on the Versatile CLCD are
reversed when the 5:6:5 mode is used. The patch sets the proper
bit in the SYS_CLCD register value.

Signed-off-by: Catalin Marinas
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

Cc: Greg KH <greg@kroah.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It looks like logic for enabling hardware tapping in ALPS driver was
inverted and we enable it only if it was already enabled by BIOS or
firmware.

I have a confirmation from one user that the patch below fixes the problem
for him and it might be beneficial if we could get it into 2.6.12.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The ELF core dump code has one use of off_t when writing out segments.
Some of the segments may be passed the 2GB limit of an off_t, even on a
32-bit system, so it's important to use loff_t instead.  This fixes a
corrupted core dump in the bigcore test in GDB's testsuite.

Signed-off-by: Daniel Jacobowitz <dan@codesourcery.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This fixed a problem that showed up in the Fedora development tree a few
weeks before the Fedora Core 4 release, initially as slab corruption, later
as hard crashes on boot up, when slab debugging was disabled for the
release.  More details on the history at
https://bugzilla.redhat.com/bugzilla/show_bug.cgi?id=158424



The problem is caused by sbp2's use of scsi_host->hostdata[0] to hold a
scsi_id, without explicitly requesting space for it.  Since hostdata is
declared as a zero-sized array, we don't get any such space by default, so
it must be explicitly requested.  The patch below implements just that.

Signed-off-by: Alexandre Oliva <aoliva@redhat.com>
Cc: Jody McIntyre <scjody@modernduck.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

__elv_add_request().  rq.count[READ] + rq.count[WRITE] can increase
more than one if another thread has allocated a request after the
current request is allocated or in_flight could have changed resulting
in larger-than-one change of nrq, thus breaking the threshold
mechanism.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Tejun Heo <htejun@gmail.com>

nothing.

Signed-off-by: Jens Axboe <axboe@suse.de>
Signed-off-by: Tejun Heo <htejun@gmail.com>

This fixes various crashes on 64-bit when using this module.

Based upon a patch by Juergen Kreileder <jk@blackdown.de>.

Signed-off-by: David S. Miller <davem@davemloft.net>
ACKed-by: Patrick McHardy <kaber@trash.net>

enable cpusets
enable new lpfc and jsm drivers
enable new dm-multipath
leave new agp disabled
disable rivafb, it does not handle the cards in G5 models (FX5200 as example)
the new nvidiafb doesnt work on bigendian, yet

Signed-off-by: Olaf Hering <olh@suse.de>
Acked-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Here is a patch to update the example configs in arch/ppc64/configs.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Without this patch, some usb kobjects, which are parents to the usx2y's
kobjects can be freed before the usx2y's.  This led to an oops in
get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects
were freed.  The patch ensures the correct sequence.  Tested ok on
kernel 2.6.12-rc2.

Present in ALSA cvs

Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Without this patch, some usb kobjects, which are parents to the usx2y's
kobjects can be freed before the usx2y's.  This led to an oops in
get_kobj_path_length() and a dead keyboard, when the usx2y's kobjects
were freed.  The patch ensures the correct sequence.  Tested ok on
kernel 2.6.12-rc2.

Present in ALSA cvs

Signed-off-by: Karsten Wiese <annabellesgarden@yahoo.de>
Signed-off-by: Greg Kroah-Hartman <gregkh@suse.de>
Signed-off-by: Chris Wright <chrisw@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Module needs a license to prevent kernel tainting.

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Acked-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This patch causes the ignore_normal_resume flag to be set slightly earlier,
before there is a chance that the apm driver will receive the normal resume
event from the BIOS.  (Addresses Debian bug #310865)

Signed-off-by: Thomas Hood <jdthood@yahoo.co.uk>
Acked-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fixed freeing of event memory in i2o_block_event()

Signed-off-by: Markus Lidel <Markus.Lidel@shadowconnect.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

It prints out x,x instead of x,y.

Signed-off-by: Jon Smirl <jonsmirl@gmail.com>
Cc: "Antonino A. Daplas" <adaplas@hotpop.com>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>