- Oct 28, 2020
-
-
David Woodhouse authored
Bits 63-48 of the I/OAPIC Redirection Table Entry map directly to bits 19-4 of the address used in the resulting MSI cycle. Historically, the x86 MSI format only used the top 8 of those 16 bits as the destination APIC ID, and the "Extended Destination ID" in the lower 8 bits was unused. With interrupt remapping, the lowest bit of the Extended Destination ID (bit 48 of RTE, bit 4 of MSI address) is now used to indicate a remappable format MSI. A hypervisor can use the other 7 bits of the Extended Destination ID to permit guests to address up to 15 bits of APIC IDs, thus allowing 32768 vCPUs before having to expose a vIOMMU and interrupt remapping to the guest. No behavioural change in this patch, since nothing yet permits APIC IDs above 255 to be used with the non-IR I/OAPIC domain. [ tglx: Converted it to the cleaned up entry/msi_msg format and added commentry ] Signed-off-by:
David Woodhouse <dwmw@amazon.co.uk> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Link: https://lore.kernel.org/r/20201024213535.443185-32-dwmw2@infradead.org
-
David Woodhouse authored
Now that the old get_irq_domain() method has gone, consolidate on just the map_XXX_to_iommu() functions. Signed-off-by:
-
David Woodhouse authored
All users are converted to use the fwspec based parent domain lookup. Signed-off-by:
-
David Woodhouse authored
All possible parent domains have a select method now. Make use of it. Signed-off-by:
-
David Woodhouse authored
All possible parent domains have a select method now. Make use of it. Signed-off-by:
-
David Woodhouse authored
Preparatory for removing irq_remapping_get_irq_domain() Signed-off-by:
-
David Woodhouse authored
Preparatory for removing irq_remapping_get_irq_domain() Signed-off-by:
-
David Woodhouse authored
Preparatory change to remove irq_remapping_get_irq_domain(). Signed-off-by:
-
David Woodhouse authored
This will be used to select the irqdomain for I/O-APIC and HPET. Signed-off-by:
-
David Woodhouse authored
Prerequisite to make x86 more irqdomain compliant. Signed-off-by:
Marc Zyngier <maz@kernel.org> Link: https://lore.kernel.org/r/20201024213535.443185-23-dwmw2@infradead.org
-
David Woodhouse authored
The I/O-APIC generates an MSI cycle with address/data bits taken from its Redirection Table Entry in some combination which used to make sense, but now is just a bunch of bits which get passed through in some seemingly arbitrary order. Instead of making IRQ remapping drivers directly frob the I/OA-PIC RTE, let them just do their job and generate an MSI message. The bit swizzling to turn that MSI message into the I/O-APIC's RTE is the same in all cases, since it's a function of the I/O-APIC hardware. The IRQ remappers have no real need to get involved with that. The only slight caveat is that the I/OAPIC is interpreting some of those fields too, and it does want the 'vector' field to be unique to make EOI work. The AMD IOMMU happens to put its IRTE index in the bits that the I/O-APIC thinks are the vector field, and accommodates this requirement by reserving the first 32 indices for the I/O-APIC. The Intel IOMMU doesn't actually use the bits that the I/O-APIC thinks are the vector field, so it fills in the 'pin' value there instead. [ tglx: Replaced the unreadably macro maze with the cleaned up RTE/msi_msg bitfields and added commentry to explain the mapping magic ] Signed-off-by:
-
Thomas Gleixner authored
Having two seperate structs for the I/O-APIC RTE entries (non-remapped and DMAR remapped) requires type casts and makes it hard to map. Combine them in IO_APIC_routing_entry by defining a union of two 64bit bitfields. Use naming which reflects which bits are shared and which bits are actually different for the operating modes. [dwmw2: Fix it up and finish the job, pulling the 32-bit w1,w2 words for register access into the same union and eliminating a few more places where bits were accessed through masks and shifts.] Signed-off-by: -
Thomas Gleixner authored
'trigger' and 'polarity' are used throughout the I/O-APIC code for handling the trigger type (edge/level) and the active low/high configuration. While there are defines for initializing these variables and struct members, they are not used consequently and the meaning of 'trigger' and 'polarity' is opaque and confusing at best. Rename them to 'is_level' and 'active_low' and make them boolean in various structs so it's entirely clear what the meaning is. Signed-off-by:
-
Thomas Gleixner authored
Nothing uses the macro maze anymore. Signed-off-by:
-
Thomas Gleixner authored
Use the msi_msg shadow structs and compose the message with named bitfields instead of the unreadable macro maze. Signed-off-by:
-
Thomas Gleixner authored
Use the bitfields in the x86 shadow structs instead of decomposing the 32bit value with macros. Signed-off-by:
-
Thomas Gleixner authored
Use the x86 shadow structs in msi_msg instead of the macros. Signed-off-by:
-
Thomas Gleixner authored
Get rid of the macro mess and use the shadow structs for the x86 specific MSI message format. Convert the intcapxt setup to use named bitfields as well while touching it anyway. Signed-off-by:
-
Thomas Gleixner authored
Use the bitfields in the x86 shadow struct to compose the MSI message. Signed-off-by:
-
Thomas Gleixner authored
Create shadow structs with named bitfields for msi_msg data, address_lo and address_hi and use them in the MSI message composer. Provide a function to retrieve the destination ID. This could be inline, but that'd create a circular header dependency. [dwmw2: fix bitfields not all to be a union] Signed-off-by:
-
Thomas Gleixner authored
Architectures like x86 have their MSI messages in various bits of the data, address_lo and address_hi field. Composing or decomposing these messages with bitmasks and shifts is possible, but unreadable gunk. Allow architectures to provide an architecture specific representation for each member of msi_msg. Provide empty defaults for each and stick them into an union. Signed-off-by:
-
David Woodhouse authored
This isn't really dependent on PCI MSI; it's just generic MSI which is now supported by the generic x86_vector_domain. Move the HPET MSI support back into hpet.c with the rest of the HPET support. Signed-off-by:
-
David Woodhouse authored
This shouldn't be dependent on PCI_MSI. HPET and I/O-APIC can deliver interrupts through MSI without having any PCI in the system at all. Signed-off-by:
-
Thomas Gleixner authored
apic::irq_dest_mode is actually a boolean, but defined as u32 and named in a way which does not explain what it means. Make it a boolean and rename it to 'dest_mode_logical' Signed-off-by:
-
Thomas Gleixner authored
struct apic has two members which store information about the destination mode: dest_logical and irq_dest_mode. dest_logical contains a mask which was historically used to set the destination mode in IPI messages. Over time the usage was reduced and the logical/physical functions were seperated. There are only a few places which still use 'dest_logical' but they can use 'irq_dest_mode' instead. irq_dest_mode is actually a boolean where 0 means physical destination mode and 1 means logical destination mode. Of course the name does not reflect the functionality. This will be cleaned up in a subsequent change. Remove apic::dest_logical and fixup the remaining users. Signed-off-by:
-
Thomas Gleixner authored
All these functions are only used for logical destination mode. So reading the destination mode mask from the apic structure is a pointless exercise. Just hand in the proper constant: APIC_DEST_LOGICAL. Signed-off-by:
-
Thomas Gleixner authored
The enum ioapic_irq_destination_types and the enumerated constants starting with 'dest_' are gross misnomers because they describe the delivery mode. Rename then enum and the constants so they actually make sense. Signed-off-by:
-
Thomas Gleixner authored
The ioapic interrupt type table is wrong as it assumes that polarity in IO/APIC context means active high when set. But the IO/APIC polarity is working the other way round. This works because the ordering of the entries is consistent with the device tree and the type information is not used by the IO/APIC interrupt chip. The whole trigger and polarity business of IO/APIC is misleading and the corresponding constants which are defined as 0/1 are not used consistently and are going to be removed. Rename the type table members to 'is_level' and 'active_low' and adjust the type information for consistency sake. No functional change. Signed-off-by:
-
Thomas Gleixner authored
The UV x2apic is strictly using physical destination mode, but apic::dest_logical is initialized with APIC_DEST_LOGICAL. This does not matter much because UV does not use any of the generic functions which use apic::dest_logical, but is still inconsistent. Signed-off-by:
-
David Woodhouse authored
The Intel IOMMU has an MSI-like configuration for its interrupt, but it isn't really MSI. So it gets to abuse the high 32 bits of the address, and puts the high 24 bits of the extended APIC ID there. This isn't something that can be used in the general case for real MSIs, since external devices using the high bits of the address would be performing writes to actual memory space above 4GiB, not targeted at the APIC. Factor the hack out and allow it only to be used when appropriate, adding a WARN_ON_ONCE() if other MSIs are targeted at an unreachable APIC ID. That should never happen since the compatibility MSI messages are not used when Interrupt Remapping is enabled. The x2apic_enabled() check isn't needed because Linux won't bring up CPUs with higher APIC IDs unless IR and x2apic are enabled anyway. Signed-off-by:
-
David Woodhouse authored
Currently, Linux as a hypervisor guest will enable x2apic only if there are no CPUs present at boot time with an APIC ID above 255. Hotplugging a CPU later with a higher APIC ID would result in a CPU which cannot be targeted by external interrupts. Add a filter in x2apic_apic_id_valid() which can be used to prevent such CPUs from coming online, and allow x2apic to be enabled even if they are present at boot time. Fixes: ce69a784 ("x86/apic: Enable x2APIC without interrupt remapping under KVM") Signed-off-by:
-
David Woodhouse authored
No functional change; just reserve the feature bit for now so that VMMs can start to implement it. This will allow the host to indicate that MSI emulation supports 15-bit destination IDs, allowing up to 32768 CPUs without interrupt remapping. cf. https://patchwork.kernel.org/patch/11816693/ for qemu Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> Message-Id: <4cd59bed05f4b7410d3d1ffd1e997ab53683874d.camel@infradead.org> Signed-off-by:
-
- Oct 25, 2020
-
-
-
Joe Perches authored
Use a more generic form for __section that requires quotes to avoid complications with clang and gcc differences. Remove the quote operator # from compiler_attributes.h __section macro. Convert all unquoted __section(foo) uses to quoted __section("foo"). Also convert __attribute__((section("foo"))) uses to __section("foo") even if the __attribute__ has multiple list entry forms. Conversion done using the script at: https://lore.kernel.org/lkml/75393e5ddc272dc7403de74d645e6c6e0f4e70eb.camel@perches.com/2-convert_section.pl Signed-off-by:Joe Perches <joe@perches.com> Reviewed-by:
Nick Desaulniers <ndesaulniers@gooogle.com> Reviewed-by:
Miguel Ojeda <ojeda@kernel.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rasmus Villemoes authored
tid_addr is not a "pointer to (pointer to int in userspace)"; it is in fact a "pointer to (pointer to int in userspace) in userspace". So sparse rightfully complains about passing a kernel pointer to put_user(). Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
Rasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by:
-
Eric Biggers authored
Commit 453431a5 ("mm, treewide: rename kzfree() to kfree_sensitive()") renamed kzfree() to kfree_sensitive(), but it left a compatibility definition of kzfree() to avoid being too disruptive. Since then a few more instances of kzfree() have slipped in. Just get rid of them and remove the compatibility definition once and for all. Signed-off-by:
Eric Biggers <ebiggers@google.com> Signed-off-by:
-
Joe Perches authored
If set, use the environment variable GIT_DIR to change the default .git location of the kernel git tree. If GIT_DIR is unset, keep using the current ".git" default. Link: https://lkml.kernel.org/r/c5e23b45562373d632fccb8bc04e563abba4dd1d.camel@perches.com Signed-off-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull timer fixes from Thomas Gleixner: "A time namespace fix and a matching selftest. The futex absolute timeouts which are based on CLOCK_MONOTONIC require time namespace corrected. This was missed in the original time namesapce support" * tag 'timers-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: selftests/timens: Add a test for futex() futex: Adjust absolute futex timeouts with per time namespace offset
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fixes from Thomas Gleixner: "Two scheduler fixes: - A trivial build fix for sched_feat() to compile correctly with CONFIG_JUMP_LABEL=n - Replace a zero lenght array with a flexible array" * tag 'sched-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/features: Fix !CONFIG_JUMP_LABEL case sched: Replace zero-length array with flexible-array -
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fix from Thomas Gleixner: "A single fix to compute the field offset of the SNOOPX bit in the data source bitmask of perf events correctly" * tag 'perf-urgent-2020-10-25' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf: correct SNOOPX field offset
-
