Skip to content
  1. May 29, 2010
  3. May 28, 2010
  5. May 27, 2010
  7. May 25, 2010
    • Clemens Ladisch's avatar
      ALSA: emu10k1: allow high-resolution mixer controls · 4daf7a0c
      Clemens Ladisch authored 
      

Add a module option to allow the GPR mixer controls to have the full
resolution of the hardware, i.e., 0...2^31-1 instead of 0...100.

Because of bugs in userspace tools like alsactl and alsamixer, this is
not yet enabled by default.

Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      4daf7a0c
    • Clemens Ladisch's avatar
      ALSA: hda_intel: fix handling of non-completion stream interrupts · 9ef04066
      Clemens Ladisch authored 
      

Check that the interrupt raised for a stream is actually a buffer
completion interrupt before handling it as one.  Otherwise, memory
errors or FIFO xruns would be interpreted as a pointer update and could
break the stream timing.

Signed-off-by: default avatarClemens Ladisch <clemens@ladisch.de>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      9ef04066
    • Daniel T Chen's avatar
      ALSA: hda: Fix model quirk for Dell M1730 · 66668b6f
      Daniel T Chen authored 
      BugLink: https://launchpad.net/bugs/576160



Symptom: Currently (2.6.32.12) the Dell M1730 uses the 3stack model
quirk. Unfortunately this means that capture is not functional out-
of-the-box despite ensuring that capture settings are unmuted and
raised fully.

Test case: boot from Ubuntu 10.04 LTS live cd; capture does not
work.

Resolution: Correct the model quirk for Dell M1730 to rely on the
BIOS configuration.

This patch also trivially sorts the quirk into the correct section
based on the comments.

Reported-and-Tested-By: default avatar <picdragon99@msn.com>
Tested-By: Daren Hayward
Tested-By: Tobias Krais
Cc: <stable@kernel.org>
Signed-off-by: default avatarDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      66668b6f
    • Justin P. Mattock's avatar
      ALSA: hda - iMac9,1 sound fixes · b7cccc52
      Justin P. Mattock authored 
      

First issue:
With the original patch, I've noticed by unmuting the mic
(and even having it muted), there is a distorted("Noise")
coming from the internal speakers, even when the headphones are plugged in.
What my finding's revealed is:

	/* Mic (rear) pin: input vref at 80% */
	{0x18, AC_VERB_SET_PIN_WIDGET_CONTROL, PIN_VREF80},
	{0x18, AC_VERB_SET_AMP_GAIN_MUTE, AMP_OUT_MUTE},

From the original patch. Looking at codec#0 0x18/0x1a is listed as:

Node 0x18 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x00 0x00]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x90100141: [Fixed] Speaker at Int N/A
    Conn = Unknown, Color = Unknown
    DefAssociation = 0x4, Sequence = 0x1
    Misc = NO_PRESENCE
  Pin-ctls: 0x41: OUT VREF_50
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c* 0x0d 0x0e 0x0f 0x26

seems this Node is listed as: [Fixed] Speaker while 0x15

Node 0x15 [Pin Complex] wcaps 0x40018f: Stereo Amp-In Amp-Out
  Amp-In caps: ofs=0x00, nsteps=0x03, stepsize=0x27, mute=0
  Amp-In vals:  [0x00 0x00]
  Amp-Out caps: ofs=0x00, nsteps=0x00, stepsize=0x00, mute=1
  Amp-Out vals:  [0x80 0x80]
  Pincap 0x0000373c: IN OUT HP Detect
    Vref caps: HIZ 50 GRD 80 100
  Pin Default 0x018b3020: [Jack] Line In at Ext Rear
    Conn = Comb, Color = Blue
    DefAssociation = 0x2, Sequence = 0x0
  Pin-ctls: 0x01: VREF_50
  Unsolicited: tag=00, enabled=0
  Connection: 5
     0x0c 0x0d* 0x0e 0x0f 0x26

is [Jack] Line In at Ext Rear.
(looking at the other apple products as examples
I came up with the fix below).

Second issue:
alc885_mbp_4ch_modes
The original patch does a good job with the
HP pin automute function, but from what I noticed is I would have to manually
change the channel form 2 to 4 after plugging the headphones in.
And not to mention having odd moments to where I was jamming out
with the headphones on, then later realized I had sound blasting out
of the speakers as well. My findings revealed that changing
alc885_mbp_4ch_modes to alc885_mba21_ch_modes and setting
-	spec->autocfg.speaker_pins[0] = 0x15;
+	spec->autocfg.speaker_pins[0] = 0x18;
gets the automute function when the headphones plugged in working
flawlessly(and the no need to manually change the channel number
afterwards).

Third issue:
alc885_imac91_mixer
There probably doesnt need to be anything changed with this
(esspecially if your one to like lots of sliders),but my findings
revealed that mac osx only has a master on the top right,
another switch on itunes, and then a slider for the mic.

So the changes I did below try and mimic osx as much as possible
(only thing I had an issue with is just having one mute switch
on the master, instead of having two(still investigating)).

fourth issue:
alc882_capture_source
I endeded up creating alc889A_imac91_capture_source()
only  because looking at alc882_capture_source I see
that the mic is set to 0x1 while this works, I also noticed
that adding 0x1 and 0x01 and testing that 0x1 somehow
stops working, and 0x01 works(so I figured 0x01 was more
of the alpha of the numbers(still need to figure out
where that valuse is)). In any case the microphone
does work with the original, and with the below patch, but both
still record not as clean(lots of "Noise", which I would like to
look into too).
Note: using alsamixer -Va reveals the capture switches.

Signed-off-by: default avatarJustin P. Mattock <justinmattock@gmail.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      b7cccc52
    • Daniel T Chen's avatar
      ALSA: hda: Use LPIB for Toshiba A100-259 · 4e0938db
      Daniel T Chen authored 
      BugLink: https://launchpad.net/bugs/549560



Symptom: on a significant number of hardware, booting from a live cd
results in capture working correctly, but once the distribution is
installed, booting from the install results in capture not working.

Test case: boot from Ubuntu 10.04 LTS live cd; capture works correctly.
Install to HD and reboot; capture does not work. Reproduced with 2.6.32
mainline build (vanilla kernel.org compile)

Resolution: add SSID for Toshiba A100-259 to the position_fix quirk
table, explicitly specifying the LPIB method.

I'll be sending additional patches for these SSIDs as bug reports are
confirmed.

This patch also trivially sorts the quirk table in ascending order by
subsystem vendor.

Reported-and-Tested-by: default avatar <davide.molteni@gmail.com>
Cc: <stable@kernel.org>
Signed-off-by: default avatarDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      4e0938db
    • Daniel T Chen's avatar
      ALSA: hda: Use LPIB for Acer Aspire 5110 · 7a68be94
      Daniel T Chen authored 
      BugLink: https://launchpad.net/bugs/583983



Symptom: on a significant number of hardware, booting from a live cd
results in capture working correctly, but once the distribution is
installed, booting from the install results in capture not working.

Test case: boot from Ubuntu 10.04 LTS live cd; capture works correctly.
Install to HD and reboot; capture does not work. Reproduced with 2.6.32
mainline build (vanilla kernel.org compile).

Resolution: add SSID for Acer Aspire 5110 to the position_fix quirk
table, explicitly specifying the LPIB method.

I'll be sending additional patches for these SSIDs as bug reports are
confirmed.

Reported-and-Tested-By: Leo
Cc: <stable@kernel.org>
Signed-off-by: default avatarDaniel T Chen <crimsun@ubuntu.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      7a68be94
    • H Hartley Sweeten's avatar
      ALSA: aw2-alsa.c: use pci_ids.h defines and fix checkpatch.pl noise · 34329fae
      H Hartley Sweeten authored 
      

Use the VENDOR/DEVICE ids provided in pci_ids.h instead of creating
local ids of the same values.

Also, fix the following checkpatch.pl warnings:

WARNING: Use #include <linux/io.h> instead of <asm/io.h>
WARNING: unnecessary whitespace before a quoted newline

Signed-off-by: default avatarH Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      34329fae
  9. May 20, 2010
  11. May 17, 2010
  13. May 12, 2010
  15. May 11, 2010
  17. May 10, 2010
  19. May 08, 2010
  21. May 07, 2010
    • Wu Fengguang's avatar
      ALSA: hda - fix DG45ID SPDIF output · 4d26f446
      Wu Fengguang authored 
      

This reverts part of commit 52dc4386, in order to fix a regression:
broken SPDIF output on Intel DG45FC motherboard (IDT 92HD73E1X5 codec).

	--- DG45FC-IDT-codec-2.6.32  (SPDIF OK)
	+++ DG45FC-IDT-codec-2.6.33  (SPDIF broken)

	 Node 0x22 [Pin Complex] wcaps 0x400301: Stereo Digital
	   Pincap 0x00000010: OUT
	-  Pin Default 0x40f000f0: [N/A] Other at Ext N/A
	-    Conn = Unknown, Color = Unknown
	-    DefAssociation = 0xf, Sequence = 0x0
	-  Pin-ctls: 0x00:
	+  Pin Default 0x014510a0: [Jack] SPDIF Out at Ext Rear
	+    Conn = Optical, Color = Black
	+    DefAssociation = 0xa, Sequence = 0x0
	+  Pin-ctls: 0x40: OUT
	   Connection: 3
	      0x25* 0x20 0x21
	 Node 0x23 [Pin Complex] wcaps 0x400301: Stereo Digital
	   Pincap 0x00000010: OUT
	-  Pin Default 0x01451140: [Jack] SPDIF Out at Ext Rear
	+  Pin Default 0x074510b0: [Jack] SPDIF Out at Ext Rear Panel
	     Conn = Optical, Color = Black
	-    DefAssociation = 0x4, Sequence = 0x0
	-    Misc = NO_PRESENCE
	-  Pin-ctls: 0x40: OUT
	+    DefAssociation = 0xb, Sequence = 0x0
	+  Pin-ctls: 0x00:
	   Connection: 3
	      0x26* 0x20 0x21

Cc: <stable@kernel.org>
Cc: Alexey Fisher <bug-track@fisher-privat.net>
Tested-by: default avatarDavid Härdeman <david@hardeman.nu>
Signed-off-by: default avatarWu Fengguang <fengguang.wu@intel.com>
Signed-off-by: default avatarTakashi Iwai <tiwai@suse.de>
      4d26f446