- Feb 11, 2015
-
-
Rusty Russell authored
This simplifies the early probe. Signed-off-by:Rusty Russell <rusty@rustcorp.com.au>
-
Rusty Russell authored
The VIRTIO_PCI_CAP_PCI_CFG in the PCI virtio 1.0 spec allows access to the BAR registers without mapping them. This is a compulsory feature, and we implement it here. There are some subtleties involving access widths which we should note: 4.1.4.7.1 Device Requirements: PCI configuration access capability ... Upon detecting driver write access to pci_cfg_data, the device MUST execute a write access at offset cap.offset at BAR selected by cap.bar using the first cap.length bytes from pci_cfg_data. Upon detecting driver read access to pci_cfg_data, the device MUST execute a read access of length cap.length at offset cap.offset at BAR selected by cap.bar and store the first cap.length bytes in pci_cfg_data. So, for a write, we copy into the pci_cfg_data window, then write from there out to the BAR. This works correctly if cap.length != width of write. Similarly, for a read, we read into window from the BAR then read the value from there. Signed-off-by: -
Rusty Russell authored
This is a magic register which causes a character to be outputted: it can be used even before the device is configured. Signed-off-by: -
Rusty Russell authored
Signed-off-by: -
Rusty Russell authored
We only support virtio 1.0 now Signed-off-by: -
Rusty Russell authored
Signed-off-by: -
Rusty Russell authored
Signed-off-by: -
Rusty Russell authored
The only real change here (other than using the PCI bus) is that we didn't negotiate VIRTIO_NET_F_MRG_RXBUF before, so the format of the packet header changed with virtio 1.0; we need TUNSETVNETHDRSZ on the tun fd to tell it about the extra two bytes. Signed-off-by: -
Rusty Russell authored
We remove SCSI support (which was removed for 1.0) and VIRTIO_BLK_F_FLUSH feature flag (removed too, since it's compulsory for 1.0). The rest is mainly mechanical. Signed-off-by: -
Rusty Russell authored
Otherwise Linux fails to find the bus. Signed-off-by: -
Rusty Russell authored
We want to use the local kernel headers, but -I../../include/uapi leads us into a world of hurt. Instead we create a dummy include/ dir with symlinks. If we just use #include "../../include/uapi/linux/virtio_blk.h" we get: ../../include/uapi/linux/virtio_blk.h:31:32: fatal error: linux/virtio_types.h: No such file or directory #include <linux/virtio_types.h> Signed-off-by: -
Rusty Russell authored
For each device, We need to include the vendor capabilities to demark where virtio common, notification and ISR regions are (we put them all in BAR0). We need to handle the switching of the virtqueues using the accessors. Signed-off-by: -
Rusty Russell authored
This handles ioport 0xCF8 and 0xCFC accesses, which are used to read/write PCI device config space. Signed-off-by: -
Rusty Russell authored
We don't do anything with them yet (emulate_mmio_write and emulate_mmio_read are stubs), but we decode the instructions and search for the device they're hitting. Signed-off-by: -
Rusty Russell authored
This is where we point our PCI BARs, so that we can intercept MMIO accesses. We tell the kernel about it so any faults in this area are directed to us. Signed-off-by: -
Rusty Russell authored
This lets us implement PCI. Signed-off-by: -
Rusty Russell authored
While hacking on getting I/O out to the lguest launcher, I noticed that returning 0xFF for the PS/2 keyboard status made it spin for a while thinking there was a key pending. Fix this by returning 1 instead of 0xFF. Signed-off-by: -
Rusty Russell authored
We copy 7 bytes at eip for userspace's instruction decode; we have to carefully handle the case where eip is at the end of a page. We can't leave this to userspace since kernel has all the page table decode logic. The decode logic moves to userspace, basically unchanged. Signed-off-by: -
Rusty Russell authored
This is preparation for userspace handling MMIO and ioport accesses. Signed-off-by: -
Rusty Russell authored
Theoretical debates aside, now it boots. Signed-off-by:
-
- Jan 16, 2015
-
-
Sukadev Bhattiprolu authored
dwfl_report_offline() works only when libraries are prelinked. Replace dwfl_report_offline() with dwfl_report_elf() so we correctly extract debug info even from libraries that are not prelinked. Reported-by:
Jiri Olsa <jolsa@redhat.com> Signed-off-by:
Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Tested-by:
Arnaldo Carvalho de Melo <acme@redhat.com>
-
Namhyung Kim authored
Currently the symbol structure is allocated with symbol_conf.priv_size to carry sideband information like annotation, map browser on TUI and sort-by-name tree node. So retrieving these information from symbol needs to care about the details of such placement. However the annotation code just assumes that the symbol is placed after the struct annotation. But actually there's other info between them. So accessing those struct will lead to an undefined behavior (usually a crash) after they write their info to the same location. To reproduce the problem, please follow the steps below: 1. run perf report (TUI of course) with -v option 2. open map browser (by pressing right arrow key for any entry) 3. search any function (by pressing '/' key and input whatever..) 4. return to the hist browser (by pressing 'q' or left arrow key) 5. open annotation window for the same entry (by pressing 'a' key) Signed-off-by:
Namhyung Kim <namhyung@kernel.org> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421234288-22758-1-git-send-email-namhyung@kernel.org Signed-off-by:
-
Wang Nan authored
Perf tool fails to unwind user stack if the event raises in a shared object. This patch improves tests/dwarf-unwind.c to demonstrate the problem by utilizing commonly used glibc function "bsearch". If perf is not statically linked, the testcase will try to unwind a mixed call trace. By debugging libunwind I found that there is a bug in unwind-libunwind: it always passes 0 as segbase to libunwind, cause libunwind unable to locate debug_frame entry fir first level ip address (I add some more debugging output into libunwind to make things clear): >_Uarm_dwarf_find_debug_frame: start_ip = 10be98, end_ip = 10c2a4 >_Uarm_dwarf_find_debug_frame: found debug_frame table `/lib/libc-2.18.so': segbase=0x0, len=7, gp=0x0, table_data=0x449388 >_Uarm_dwarf_search_unwind_table: call lookup:ip = b6cd3bcc, segbase = 0, rel_ip = b6cd3bcc >lookup: e->start_ip_offset = bcf18 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 6d314 (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 33d0c (rel_ip = b6cd3bcc) ... >lookup: e->start_ip_offset = 15d0c (rel_ip = b6cd3bcc) >lookup: e->start_ip_offset = 15c40 (rel_ip = b6cd3bcc) >_Uarm_dwarf_search_unwind_table: IP b6cd3bcc inside range b6c12000-b6d4c000, but no explicit unwind info found >put_rs_cache: unmasking signals/interrupts and releasing lock >_Uarm_dwarf_step: returning -10 >_Uarm_step: dwarf_step()=-10 This patch passes map->start as segbase to dwarf_find_debug_frame(), so di will be initialized correctly. In addition, dso and executable are different when setting segbase. This patch first check whether the elf is executable, and pass segbase only for shared object. Signed-off-by:Wang Nan <wangnan0@huawei.com> Acked-by:
Jiri Olsa <jolsa@kernel.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Li Zefan <lizefan@huawei.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1421203007-75799-1-git-send-email-wangnan0@huawei.com Signed-off-by:
-
Vineet Gupta authored
This is due to duplicated unistd inclusion (via uClibc headers + kernel headers) Also seen on ARM uClibc based tools ------- ARC build ---------->8------------- CC util/evlist.o In file included from ~/arc/k.org/arch/arc/include/uapi/asm/unistd.h:25:0, from util/../perf-sys.h:10, from util/../perf.h:15, from util/event.h:7, from util/event.c:3: ~/arc/k.org/include/uapi/asm-generic/unistd.h:906:0: warning: "__NR_fcntl64" redefined [enabled by default] #define __NR_fcntl64 __NR3264_fcntl ^ In file included from ~/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/sys/syscall.h:24:0, from util/../perf-sys.h:6, ----------------->8------------------- ------- ARM build ---------->8------------- CC FPIC plugin_scsi.o In file included from util/../perf-sys.h:9:0, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/arc/k.org/arch/arm/include/uapi/asm/unistd.h:28:0: warning: "__NR_restart_syscall" redefined [enabled by default] In file included from ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/sys/syscall.h:25:0, from util/../perf-sys.h:6, from util/../perf.h:15, from util/cache.h:7, from perf.c:12: ~/buildroot/host/usr/arm-buildroot-linux-uclibcgnueabi/sysroot/usr/include/bits/sysnum.h:17:0: note: this is the location of the previous definition ----------------->8------------------- Signed-off-by:Vineet Gupta <vgupta@synopsys.com> Cc: Alexey Brodkin <Alexey.Brodkin@synopsys.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@kernel.org> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Peter Zijlstra <peterz@infradead.org> Link: http://lkml.kernel.org/r/1421156604-30603-4-git-send-email-vgupta@synopsys.com Signed-off-by:
-
Vineet Gupta authored
----------------->8------------------ CC bench/sched-pipe.o In file included from builtin-annotate.c:13:0: util/cache.h:76:15: warning: redundant redeclaration of 'strlcpy' [-Wredundant-decls] extern size_t strlcpy(char *dest, const char *src, size_t size); ^ In file included from util/util.h:55:0, from builtin.h:4, from builtin-annotate.c:8: ~/vineetg/arc/gnu/INSTALL_1412-arc-2014.12-rc1/arc-snps-linux-uclibc/sysroot/usr/include/string.h:396:15: note: previous declaration of 'strlcpy' was here extern size_t strlcpy(char *__restrict dst, const char *__restrict src, ----------------->8------------------ Signed-off-by: -
Alexey Brodkin authored
ARC Linux uses the no legacy syscalls abi and corresponding uClibc headers statfs defines f_type to be U32 which causes perf build breakage http://git.uclibc.org/uClibc/tree/libc/sysdeps/linux/common-generic/bits/statfs.h ----------->8--------------- CC fs/fs.o fs/fs.c: In function 'fs__valid_mount': fs/fs.c:82:24: error: comparison between signed and unsigned integer expressions [-Werror=sign-compare] else if (st_fs.f_type != magic) ^ cc1: all warnings being treated as errors ----------->8--------------- Signed-off-by:
Alexey Brodkin <abrodkin@synopsys.com> Acked-by:
-
Arnaldo Carvalho de Melo authored
We need to use lib/hweight.c for that, just like we do for lib/rbtree.c, so tools need to link hweight.o. For now do it directly, but we need to have a tools/lib/lk.a or .so that collects these goodies... Reported-by:
Jan Beulich <JBeulich@suse.com> Cc: Adrian Hunter <adrian.hunter@intel.com> Cc: Borislav Petkov <bp@suse.de> Cc: David Ahern <dsahern@gmail.com> Cc: Don Zickus <dzickus@redhat.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Namhyung Kim <namhyung@kernel.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Link: http://lkml.kernel.org/n/tip-a1e91dx3apzqw5kbdt7ut21s@git.kernel.org Signed-off-by:
-
Namhyung Kim authored
When thread__init_map_groups() fails, a new thread should be removed from the rbtree since it's gonna be freed. Also update last match cache only if the function succeeded. Reported-by:
David Ahern <dsahern@gmail.com> Signed-off-by:
-
Namhyung Kim authored
When build with 'make ARCH=x86' and dwarf unwind is on, there is a compiling error: CC /home/wn/perf/arch/x86/util/unwind-libdw.o CC /home/wn/perf/arch/x86/tests/regs_load.o arch/x86/tests/regs_load.S: Assembler messages: arch/x86/tests/regs_load.S:65: Error: operand type mismatch for `push' arch/x86/tests/regs_load.S:72: Error: operand type mismatch for `pop' make[1]: *** [/home/wn/perf/arch/x86/tests/regs_load.o] Error 1 make[1]: INTERNAL: Exiting with 25 jobserver tokens available; should be 24! make: *** [all] Error 2 ... Which is caused by incorrectly undefine macro HAVE_ARCH_X86_64_SUPPORT. 'config/Makefile.arch' tests __x86_64__ only when 'ARCH=x86_64'. However, when building x86_64 kernel, ARCH=x86 is valid and commonly used. Build systems, such as yocto, uses x86_64 compiler with 'ARCH=x86' to build x86_64 perf, which causes mismatching. As __LP64__ is defined for x86_64 as well, we can consolidate the __x86_64__ check to the __LP64__ check and get rid of the IS_X86_64 IMHO. (This patch is made by Namhyung Kim when replying my v1 patch: https://lkml.org/lkml/2015/1/7/17 I modified the code to remove dependency on RAW_ARCH: https://lkml.org/lkml/2015/1/7/865 Namhyung Kim didn't provide his SOB in his original email. I add mine only for my modification.) Signed-off-by:
-
Namhyung Kim authored
When it failed to write probe commands to the probe_event file in debugfs, it needs to propagate the error code properly. Current code blindly uses the return value of the write(2) so it always uses -1 (-EPERM) and it might confuse users. Signed-off-by:
Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: David Ahern <dsahern@gmail.com> Cc: Ingo Molnar <mingo@kernel.org> Cc: Jiri Olsa <jolsa@redhat.com> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Link: http://lkml.kernel.org/r/1420886028-15135-4-git-send-email-namhyung@kernel.org Signed-off-by:
-
- Jan 08, 2015
-
-
Andrey Skvortsov authored
add -lrt to fix undefined reference to `clock_gettime' error seen when the test is compiled using gcc 4.6.4. Signed-off-by:
Andrey Skvortsov <andrej.skvortzov@gmail.com> Signed-off-by:
Shuah Khan <shuahkh@osg.samsung.com>
-
Namhyung Kim authored
When perf report on TUI shows callchain it checks first node has siblings to determine whether it needs to print percentage value. But it missed a case that first node is NULL. So sometimes it segfaults like below: $ perf top -g perf: Segmentation fault -------- backtrace -------- perf[0x4fcefb] /usr/lib/libc.so.6(+0x33b20)[0x7f2a35839b20] perf(rb_next+0x8)[0x47d3d8] perf[0x4f6058] perf[0x4f833b] perf[0x4f8610] perf[0x4f209e] perf(ui_browser__run+0x3a)[0x4f2e6a] perf[0x4f94ee] perf(perf_evlist__tui_browse_hists+0x94)[0x4fbbf4] perf[0x444d10] /usr/lib/libpthread.so.0(+0x7314)[0x7f2a37070314] /usr/lib/libc.so.6(clone+0x6d)[0x7f2a358ee5bd] $ addr2line -e `which perf` 0x4f6058 /home/namhyung/project/linux/tools/perf/ui/browsers/hists.c:553 I don't know why the backtrace didn't print some symbols.. Signed-off-by:
-
Namhyung Kim authored
Markus reported that "perf top -g" can leak ~300MB per second on his machine. This is partly because it missed to free callchains when hist entries are deleted. Fix it. Reported-by:
Markus Trippelsdorf <markus@trippelsdorf.de> Signed-off-by:
-
Namhyung Kim authored
When perf report --children resorts output fields, it tries to put caller above the callee. But this was only meaningful for a same thread and doing this requires callchain enabled. So fix its check before comparing the callchain depth. This also changes the hist accumulation tests: In test 3, xmalloc in bash thread should be above than other perf threads due to alphabetical order of comm string. Also it's under page_fault in bash thread since alphabetical order of dso name. The sys_perf_event_open in perf thread is put on the last line since it's self overhead is 0. In test 4, the sys_perf_event_open is put above other perf entries that have same children overhead since its callchain depth is smaller. Signed-off-by:
-
- Jan 06, 2015
-
-
dann frazier authored
We can't use a char type to check for a negative return value since char isn't guaranteed to be signed. Indeed, the char type tends to be unsigned on ARM. Signed-off-by:
dann frazier <dann.frazier@canonical.com> Signed-off-by:
-
David Drysdale authored
When the shell fails to invoke a script because its path name is too long (ENAMETOOLONG), most shells return 127 to indicate command not found. However, some systems report 126 (which POSIX suggests should indicate a non-executable file) for this case, so allow that too. Reported-by:
Geert Uytterhoeven <geert@linux-m68k.org> Signed-off-by:
David Drysdale <drysdale@google.com> Tested-by:
-
- Jan 03, 2015
-
-
Namhyung Kim authored
The currently perf diff didn't add the baseline and delta (or other compute) fields to the sort list so output will be sorted by other fields like alphabetical order of DSO or symbol as below example. Fix it by adding hpp formats for the fields and provides default compare functions. Before: $ perf diff # Event 'cycles' # # Baseline Delta Shared Object Symbol # ........ ....... .................. ............................... # [bridge] [k] ip_sabotage_in [btrfs] [k] __etree_search.constprop.47 0.01% [btrfs] [k] btrfs_file_mmap 0.01% -0.01% [btrfs] [k] btrfs_getattr [e1000e] [k] e1000_watchdog 0.00% [kernel.vmlinux] [k] PageHuge 0.00% [kernel.vmlinux] [k] __acct_update_integrals 0.00% [kernel.vmlinux] [k] __activate_page [kernel.vmlinux] [k] __alloc_fd 0.02% +0.02% [kernel.vmlinux] [k] __alloc_pages_nodemask ... After: # Baseline Delta Shared Object Symbol # ........ ....... .................. ................................ # 24.73% -4.62% perf [.] append_chain_children 7.96% -1.29% perf [.] dso__find_symbol 6.97% -2.07% libc-2.20.so [.] vfprintf 4.61% +0.88% libc-2.20.so [.] __fprintf_chk 4.41% +2.43% perf [.] sort__comm_cmp 4.10% -0.16% perf [.] comm__str 4.03% -0.93% perf [.] machine__findnew_thread_time 3.82% +3.09% perf [.] __hists__add_entry 2.95% -0.18% perf [.] sort__dso_cmp ... Signed-off-by: -
Taesoo Kim authored
Currently, 'perf list --raw-dump' requires extra arguments (e.g., hw) to invoke, which breaks bash/zsh completion (perf-completion.sh). $ perf list --raw-dump Error: unknown option `raw-dump' usage: perf list [hw|sw|cache|tracepoint|pmu|event_glob] After, $ perf list --raw-dump cpu-cycles instructions cache-references cache-misses ... Signed-off-by:Taesoo Kim <tsgatesv@gmail.com> Acked-by:
-
- Jan 02, 2015
-
-
Namhyung Kim authored
David reported that perf can segfault when adding an uprobe event like this: $ perf probe -x /lib64/libc-2.14.90.so -a 'malloc size=%di' (gdb) bt #0 parse_eh_frame_hdr (hdr=0x0, hdr_size=2596, hdr_vaddr=71788, ehdr=0x7fffffffd390, eh_frame_vaddr= 0x7fffffffd378, table_entries=0x8808d8, table_encoding=0x8808e0 "") at dwarf_getcfi_elf.c:79 #1 0x000000385f81615a in getcfi_scn_eh_frame (hdr_vaddr=71788, hdr_scn=0x8839b0, shdr=0x7fffffffd2f0, scn=<optimized out>, ehdr=0x7fffffffd390, elf=0x882b30) at dwarf_getcfi_elf.c:231 #2 getcfi_shdr (ehdr=0x7fffffffd390, elf=0x882b30) at dwarf_getcfi_elf.c:283 #3 dwarf_getcfi_elf (elf=0x882b30) at dwarf_getcfi_elf.c:309 #4 0x00000000004d5bac in debuginfo__find_probes (pf=0x7fffffffd4f0, dbg=Unhandled dwarf expression opcode 0xfa) at util/probe-finder.c:993 #5 0x00000000004d634a in debuginfo__find_trace_events (dbg=0x880840, pev=<optimized out>, tevs=0x880f88, max_tevs=<optimized out>) at util/probe-finder.c:1200 #6 0x00000000004aed6b in try_to_find_probe_trace_events (target=0x881b20 "/lib64/libpthread-2.14.90.so", max_tevs=128, tevs=0x880f88, pev=0x859b30) at util/probe-event.c:482 #7 convert_to_probe_trace_events (target=0x881b20 "/lib64/libpthread-2.14.90.so", max_tevs=128, tevs=0x880f88, pev=0x859b30) at util/probe-event.c:2356 #8 add_perf_probe_events (pevs=<optimized out>, npevs=1, max_tevs=128, target=0x881b20 "/lib64/libpthread-2.14.90.so", force_add=false) at util/probe-event.c:2391 #9 0x000000000044014f in __cmd_probe (argc=<optimized out>, argv=0x7fffffffe2f0, prefix=Unhandled dwarf expression opcode 0xfa) at at builtin-probe.c:488 #10 0x0000000000440313 in cmd_probe (argc=5, argv=0x7fffffffe2f0, prefix=<optimized out>) at builtin-probe.c:506 #11 0x000000000041d133 in run_builtin (p=0x805680, argc=5, argv=0x7fffffffe2f0) at perf.c:341 #12 0x000000000041c8b2 in handle_internal_command (argv=<optimized out>, argc=<optimized out>) at perf.c:400 #13 run_argv (argv=<optimized out>, argcp=<optimized out>) at perf.c:444 #14 main (argc=5, argv=0x7fffffffe2f0) at perf.c:559 And I found a related commit (5704c8c4fa71 "getcfi_scn_eh_frame: Don't crash and burn when .eh_frame bits aren't there.") in elfutils that can lead to a unexpected crash like this. To safely use the function, it needs to check the .eh_frame section is a PROGBITS type. Reported-by: -
Masami Hiramatsu authored
Fix to fall back to find a probe point in symbols if perf fails to find it in debuginfo. This can happen when the target function is an alias of another function. Such alias doesn't have an entry in debuginfo but in symbols. David Ahern reported this problem in https://lkml.org/lkml/2014/12/29/355 I ensured the problem and deeper investigation discovers it. ----- eu-readelf --debug-dump=info /usr/lib/debug/lib/x86_64-linux-gnu/libc-2.19.so | grep \"malloc\" -A6 name (strp) "malloc" decl_file (data1) 25 decl_line (data2) 466 prototyped (flag_present) type (ref4) [ 81b5] declaration (flag_present) [ 8f58] formal_parameter -- name (strp) "malloc" decl_file (data1) 23 decl_line (data2) 466 prototyped (flag_present) type (ref4) [ 9f4a] declaration (flag_present) sibling (ref4) [ bb29] ... ----- All these entires have no instances (all of them are declarations) This is why the perf probe failed to find it in debuginfo. However, there are some malloc instances in symbols. ----- eu-readelf --symbols /usr/lib/debug/lib/x86_64-linux-gnu/libc-2.19.so | grep malloc$ 1181: 0000000000080700 5332 FUNC LOCAL DEFAULT 12 _int_malloc 4537: 00000000000831d0 339 FUNC LOCAL DEFAULT 12 __GI___libc_malloc 5545: 00000000000831d0 339 FUNC LOCAL DEFAULT 12 __malloc 6063: 00000000000831d0 339 FUNC GLOBAL DEFAULT 12 malloc 7302: 00000000000831d0 339 FUNC GLOBAL DEFAULT 12 __libc_malloc ----- As you an see, malloc and __libc_malloc have same address, and actually __libc_malloc has an entry in debuginfo. So you can set up a probe on __libc_malloc. To fix this problem shortly, perf probe simply falls back to find probe point(malloc) in symbols if it is not found in debuginfo. Reported-by:
-
