There are a bunch of irrelevant SPR definitions in asm/processer.h.  Cut
them down a bit, also add a DABR_TRANSLATION define which will be used
shortly.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix a bug in list scanning that can cause us to skip the last buffer on the
checkpoint list (and hence fail to do any progress under some rather
unfavorable conditions).

The problem is we first do jh=next_jh and then test

	} while (jh!=last_jh);

Hence we skip the last buffer on the list (if it was not the only buffer on
the list).  As we already do jh=next_jh; in the beginning of the loop we
are safe to just remove the assignment in the end.  It can happen that 'jh'
will be freed at the point we test jh != last_jh but that does not matter
as we never *dereference* the pointer.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Fix possible false assertion failure in log_do_checkpoint().  We might fail
to detect that we actually made a progress when cleaning up the checkpoint
lists if we don't retry after writing something to disk.  The patch was
confirmed to fix observed assertion failures for several users.

When we flushed some buffers we need to retry scanning the list.
Otherwise we can fail to detect our progress.

Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

prom_init(), the trampoline code that "talks" to Open Firmware during
early boot, has various issues with managing OF result codes. Some of my
recent fixups in fact made the problem worse on some platforms.

This patch reworks it all. Tested on g5, Maple, POWER3 and POWER5.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This gets rid of an unused variable `error' in sys_ia32.c:sys32_epoll_wait()

Getting rid of this one makes parsing the output of the kernecomp
autobuild easier --- searching for `Error' to find a problem kept
hitting this one, even though it's only a warning.

Signed-off-by: Tony Luck <tony.luck@intel.com>

The attached patch cleans up a compilation warning when ACPI
is turned off (i.e., when compiling for the Ski simulator).

Signed-off-by: Tony Luck <tony.luck@intel.com>

This cleans up the /proc/device-tree representation of the Open Firmware
device-tree on ppc and ppc64.  It does the following things:

 - Workaround an issue in some Apple device-trees where a property may
   exist with the same name as a child node of the parent.  We now
   simply "drop" the property instead of creating duplicate entries in
   /proc with random result...

 - Do not try to chop off the "@0" at the end of a node name whose unit
   address is 0.  This is not useful, inconsistent, and the code was
   buggy and didn't always work anyway.

 - Do not create symlinks for the short name and unit address parts of a
   node.  These were never really used, bloated the memory footprint of
   the device-tree with useless struct proc_dir_entry and their matching
   dentry and inode cache bloat.

This results in smaller code, smaller memory footprint, and a more
accurate view of the tree presented to userland.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

This is the ppc32 patch equivalent to the just posted ppc64 one working
around a bug in Apple device-trees regarding the "cpus" nodes.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

Apple's Open Firmware has a funny bug when creating the /cpus nodes
where it leaves a dangling '\0' character in the CPU name which ends up
appearing in the full path of the node. This is bogus and
confuses /proc/device-tree badly.

This patch strips those bogus zero's from the node full path when
reading the device-tree from Open Firmware. The "name" property is not
modified and still contains the spurrious 0 (it basically contains 0
tailing 0 instead of one) but that shouldn't be a problem.

An equivalent patch for ppc32 will follow shortly

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@osdl.org>

The initial peek read PIO of the match register is just a waste.
Just do the flush writes first, as that is more efficient.

Signed-off-by: David S. Miller <davem@davemloft.net>

Documentation for cpufreq stats.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Changes to the cpufreq stats driver:
* Changes the way P-state transition table looks in /sysfs providing more
  clear output
* Changes the time unit in the output from HZ to clock_t

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

cpfureq developers cant spel.

Signed-off-by: Dave Jones <davej@redhat.com>

From patch by: Ken Staton <ken_staton@agilent.com>
Signed-off-by: Dave Jones <davej@redhat.com>

As mandated by the spec, disable timer around transitions.

From code by : Ken Staton <ken_staton@agilent.com
Signed-off-by: Dave Jones <davej@redhat.com>

The spec states that we have to do this, which is *horrid*.

Based on code from: Ken Staton <ken_staton@agilent.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] [5/5] ondemand governor default sampling downfactor as 1

Make default sampling downfactor 1.
This works better with earlier auto downscaling change in ondemand governor.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] [4/5] ondemand governor automatic downscaling

Here is a change of policy for the ondemand governor. The modification
concerns the frequency downscaling. Instead of decreasing to a lower
frequency when the CPU usage is under 20%, this new policy automatically
scales to the optimal frequency. The optimal frequency being the lowest
frequency which provides enough power to not trigger the upscaling policy.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] [3/5] ondemand,conservative governor idle_tick clean-up

Ondemand and conservative governor clean-up, it factorises the idle ticks 
measurement.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] [2/5] ondemand,conservative governor store the idle ticks for all cpus

Ondemand, conservative governor did not store prev_cpu_idle_up into 
prev_cpu_idle_down for other CPUs than the current CPU.

Signed-off-by: Eric Piel <eric.piel@tremplin-utc.net>
Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

[PATCH] [1/5] ondemand,conservative minor bug-fix and cleanup

Attached patch fixes some minor issues with Alexander's patch and related
cleanup in both ondemand and conservative governor.

Signed-off-by: Venkatesh Pallipadi <venkatesh.pallipadi@intel.com>
Signed-off-by: Dave Jones <davej@redhat.com>

Adds support so that the cpufreq change stepping is no longer fixed at 5% and
can be changed dynamically by the user

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

A new cpufreq module, based on the ondemand one with my additional patches
just posted.  This one is more suitable for battery environments where its
probably more appealing to have the cpu freq gracefully increase and decrease
rather than flip between the min and max freq's.

N.B. Bruno Ducrot pointed out that the amd64's "do have unacceptable latency
between min and max freq transition, due to the step-by-step requirements
(200MHz IIRC)"; so AMD64 users would probably benefit from this too.

Signed-off-by: Alexander Clouter <alex-kernel@digriz.org.uk>
Signed-off-by: Dave Jones <davej@redhat.com>

Fix up comment in cpufreq.h stating transition latency should be passed
in microseconds -- it was decided long ago to switch to nanoseconds.

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>

With the release of the dual-core AMD Opterons last week,
it's high time that cpufreq supported them.  The attached
patch applies cleanly to 2.6.12-rc3 and updates powernow-k8
to support the latest Athlon 64 and Opteron processors.

Update the driver to version 1.40.0 and provide support
for dual-core processors.

Signed-off-by: Mark Langsdorf <mark.langsdorf@amd.com>
Signed-off-by: Dave Jones <davej@redhat.com>

This patch makes a needlessly global and EXPORT_SYMBOL'ed struct static.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Dave Jones <davej@redhat.com>

Some cpufreq drivers (at that time, only powernow-k7) need to recalibrate the
cpu_khz at runtime.

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

We have to recalibrate cpu_khz in order to use the current FID instead the max
FID since some BIOS do not put the processor at maximum frequency at POST. 
Also, some BIOS will change the processor frequency at our back after cpu_khz
was calibrate.  Finally, this will fix a long standing bug when we do
something like this:

# rmmod powernow-k7
# modprobe powernow-k7

Signed-off-by: Bruno Ducrot <ducrot@poupinou.org>
Signed-off-by: Andrew Morton <akpm@osdl.org>
Signed-off-by: Dave Jones <davej@redhat.com>

From: Sean Young <sean@mess.org>
Signed-off-by: Dave Jones <davej@redhat.com>

This comes up time and time again. Until its fixed, place this
comment in the Kconfig which should stem the flow of resubmissions.

Signed-off-by: Rob Weryk <rjweryk@uwo.ca>
Signed-off-by: Dave Jones <davej@redhat.com>

The speedstep-smi driver actually works on >=1 notebook with a
Pentium 4-M CPU where all other cpufreq drivers fail. Therefore,
allow speedstep-smi on P4Ms again, but warn users of likely failure

Signed-off-by: Dominik Brodowski <linux@dominikbrodowski.net>
Signed-off-by: Dave Jones <davej@redhat.com>