- Jul 24, 2008
-
-
Ulrich Drepper authored
This patch introduces the new syscall pipe2 which is like pipe but it also takes an additional parameter which takes a flag value. This patch implements the handling of O_CLOEXEC for the flag. I did not add support for the new syscall for the architectures which have a special sys_pipe implementation. I think the maintainers of those archs have the chance to go with the unified implementation but that's up to them. The implementation introduces do_pipe_flags. I did that instead of changing all callers of do_pipe because some of the callers are written in assembler. I would probably screw up changing the assembly code. To avoid breaking code do_pipe is now a small wrapper around do_pipe_flags. Once all callers are changed over to do_pipe_flags the old do_pipe function can be removed. The following test must be adjusted for architectures other than x86 and x86-64 and in case the syscall numbers changed. ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ #include <fcntl.h> #include <stdio.h> #include <unistd.h> #include <sys/syscall.h> #ifndef __NR_pipe2 # ifdef __x86_64__ # define __NR_pipe2 293 # elif defined __i386__ # define __NR_pipe2 331 # else # error "need __NR_pipe2" # endif #endif int main (void) { int fd[2]; if (syscall (__NR_pipe2, fd, 0) != 0) { puts ("pipe2(0) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if (coe & FD_CLOEXEC) { printf ("pipe2(0) set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); if (syscall (__NR_pipe2, fd, O_CLOEXEC) != 0) { puts ("pipe2(O_CLOEXEC) failed"); return 1; } for (int i = 0; i < 2; ++i) { int coe = fcntl (fd[i], F_GETFD); if (coe == -1) { puts ("fcntl failed"); return 1; } if ((coe & FD_CLOEXEC) == 0) { printf ("pipe2(O_CLOEXEC) does not set close-on-exit for fd[%d]\n", i); return 1; } } close (fd[0]); close (fd[1]); puts ("OK"); return 0; } ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ Signed-off-by:
Ulrich Drepper <drepper@redhat.com> Acked-by:
Davide Libenzi <davidel@xmailserver.org> Cc: Michael Kerrisk <mtk.manpages@googlemail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Adrian Bunk authored
Remove the obsolete and no longer used include/linux/pm_legacy.h Reviewed-by:
Robert P. J. Day <rpjday@crashcourse.ca> Signed-off-by:
Adrian Bunk <bunk@kernel.org> Cc: Pavel Machek <pavel@suse.cz> Acked-by:
"Rafael J. Wysocki" <rjw@sisk.pl> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Andrea Righi authored
On 32-bit architectures PAGE_ALIGN() truncates 64-bit values to the 32-bit boundary. For example: u64 val = PAGE_ALIGN(size); always returns a value < 4GB even if size is greater than 4GB. The problem resides in PAGE_MASK definition (from include/asm-x86/page.h for example): #define PAGE_SHIFT 12 #define PAGE_SIZE (_AC(1,UL) << PAGE_SHIFT) #define PAGE_MASK (~(PAGE_SIZE-1)) ... #define PAGE_ALIGN(addr) (((addr)+PAGE_SIZE-1)&PAGE_MASK) The "~" is performed on a 32-bit value, so everything in "and" with PAGE_MASK greater than 4GB will be truncated to the 32-bit boundary. Using the ALIGN() macro seems to be the right way, because it uses typeof(addr) for the mask. Also move the PAGE_ALIGN() definitions out of include/asm-*/page.h in include/linux/mm.h. See also lkml discussion: http://lkml.org/lkml/2008/6/11/237 [akpm@linux-foundation.org: fix drivers/media/video/uvc/uvc_queue.c] [akpm@linux-foundation.org: fix v850] [akpm@linux-foundation.org: fix powerpc] [akpm@linux-foundation.org: fix arm] [akpm@linux-foundation.org: fix mips] [akpm@linux-foundation.org: fix drivers/media/video/pvrusb2/pvrusb2-dvb.c] [akpm@linux-foundation.org: fix drivers/mtd/maps/uclinux.c] [akpm@linux-foundation.org: fix powerpc] Signed-off-by:
Andrea Righi <righi.andrea@gmail.com> Cc: <linux-arch@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Johannes Weiner authored
There are a lot of places that define either a single bootmem descriptor or an array of them. Use only one central array with MAX_NUMNODES items instead. Signed-off-by:
Johannes Weiner <hannes@saeurebad.de> Acked-by:
Ralf Baechle <ralf@linux-mips.org> Cc: Ingo Molnar <mingo@elte.hu> Cc: Richard Henderson <rth@twiddle.net> Cc: Russell King <rmk@arm.linux.org.uk> Cc: Tony Luck <tony.luck@intel.com> Cc: Hirokazu Takata <takata@linux-m32r.org> Cc: Geert Uytterhoeven <geert@linux-m68k.org> Cc: Kyle McMartin <kyle@parisc-linux.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Paul Mundt <lethal@linux-sh.org> Cc: David S. Miller <davem@davemloft.net> Cc: Yinghai Lu <yhlu.kernel@gmail.com> Cc: Christoph Lameter <cl@linux-foundation.org> Cc: Mel Gorman <mel@csn.ul.ie> Cc: Andy Whitcroft <apw@shadowen.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Jul 22, 2008
-
-
Greg Kroah-Hartman authored
device_create() is race-prone, so use the race-free device_create_drvdata() instead as device_create() is going away. Cc: Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Greg Kroah-Hartman <gregkh@suse.de>
-
- Jul 20, 2008
-
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
SYS_SUPPORTS_64BIT_KERNEL is enabled for RBTX4927/RBTX4938, but actually it was broken for long time (or from the beginning). Now it should work. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
* Unify (and fix) mem_tx4938.c and mem_tx4927.c * Simplify prom_init * Kill volatiles and unused definitions for tx4927.h and tx4938.h Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
LCD and buttons don't use I/O port space. Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Adrian Bunk authored
Commit 3e6ea3b0d7a93550a93a265e732413d3a5aaf0d2 (linux-mips.org) / 52f4f6bb (kernel.org) ([MIPS] Use kernel-supplied ARRAY_SIZE() macro.) causes the following compile error: <-- snip --> ... CC arch/mips/sgi-ip22/ip28-berr.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c: In function 'ip28_be_interrupt': /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: error: subscripted value is neither array nor pointer /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: error: subscripted value is neither array nor pointer /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:415: warning: type defaults to 'int' in declaration of 'type name' /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: error: subscripted value is neither array nor pointer /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: error: subscripted value is neither array nor pointer /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/sgi-ip22/ip28-berr.c:424: warning: type defaults to 'int' in declaration of 'type name' make[2]: *** [arch/mips/sgi-ip22/ip28-berr.o] Error 1 <-- snip --> Using ARRAY_SIZE in these places in arch/mips/sgi-ip22/ip28-berr.c was bogus, and therefore gets reverted by this patch. Signed-off-by:
Adrian Bunk <bunk@kernel.org> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
* Fix build if only RBTX4927 or RBTX4938 was selected. * Move gpio helpers to generic part. * Select SOC_TX4938 for RBTX4927/37 board. * Fix parent of rbtx4938_fpga_resource. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Ralf Baechle authored
Signed-off-by:
Phil Sutter <n0-1@freewrt.org> Signed-off-by:
Florian Fainelli <florian.fainelli@telecomint.eu> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
Use the Indy/O2 button driver. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
Use the Indy/O2 button driver. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
Instead of one SGI_HAS_HAL2 for IP22 and one for IP28, IP28 got two of them... Let's give IP22 some ALSA sound, too. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: Ralf Baechle <ralf@linux-mips.org>[MIPS] IP22, IP28: Fix merge bug Instead of one SGI_HAS_HAL2 for IP22 and one for IP28, IP28 got two of them... Let's give IP22 some ALSA sound, too. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Dmitri Vorobiev authored
While building the Malta defconfig, sparse spat the following warnings: >>>>>>>>>>>>>>>>>> arch/mips/math-emu/kernel_linkage.c:31:6: warning: symbol 'fpu_emulator_init_fpu' was not declared. Should it be static? arch/mips/math-emu/kernel_linkage.c:54:5: warning: symbol 'fpu_emulator_save_context' was not declared. Should it be static? arch/mips/math-emu/kernel_linkage.c:68:5: warning: symbol 'fpu_emulator_restore_context' was not declared. Should it be static? >>>>>>>>>>>>>>>>>> This patch fixes these errors by adding the proper prototypes to the include/asm-mips/fpu.h header, and actually using this header in the sparse-spotted source file. Build-tested with Malta defconfig. Signed-off-by:
Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Dmitri Vorobiev authored
The pcibios_max_latency variable is needlessly defined global, and this patch makes it static. Build-tested using malta_defconfig. Signed-off-by:
Dmitri Vorobiev <dmitri.vorobiev@movial.fi> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
- Jul 15, 2008
-
-
Ingo Molnar authored
fix more API change fallout in recently merged upstream changes. Signed-off-by:
Ingo Molnar <mingo@elte.hu>
-
Thomas Bogendoerfer authored
This is the LASAT part of the mips_machtype removal. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
This is the EMMA2RH part of the mips_machtype removal. [Ralf: Fixed to the #error statements] Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
This is the ARC part of the mips_machtype removal. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-By:
David Woodhouse <David.Woodhouse@intel.com> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
* Do not return void value * Make some functions static * Do not include unnecessary bootinfo.h Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Rename mach-jmr3927 directory to more proper name to make adding other platforms easier. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Acked-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
Create platform device for Indy volume buttons and remove button handling from ip22-reset.c Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
It cannot be built for a long time and nobody maintains it. Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
It can be replace wrppmc_machine_halt(). Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Yoichi Yuasa authored
Signed-off-by:
Yoichi Yuasa <yoichi_yuasa@tripeaks.co.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Thomas Bogendoerfer authored
Create platform devices for hal2 and add option for selecting HAL2 alsa driver. Signed-off-by:
Thomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Merge rbhma4200(RBTX4927/37) and rbhma4500(RBTX4938) defconfig into single rbtx49xx defconfig. And jmr3927 defconfig is also updated. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Make single kernel can be used on RBTX4927/37/38. Also make some SoC-specific code independent from board-specific code. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
Atsushi Nemoto authored
Split out PCIC dependent code and SoC dependent code from board dependent code. Now TX4927 PCIC code is independent from TX4927/TX4938 SoC code. Also fix some build problems on CONFIG_PCI=n. As a bonus, "FPCIB0 Backplane Support" is available for all TX39/TX49 boards and PCI66 support is available for all TX49 boards. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-