- Jul 11, 2016
-
-
Marcel Ziswiler authored
This patch adds the device tree to support Toradex Apalis TK1 a computer on module which can be used on different carrier boards. The module consists of a Tegra TK1 SoC, a PMIC solution, 2 GB of DDR3L RAM, a bunch of level shifters, an eMMC, a TMP451 temperature sensor chip, an I210 gigabit Ethernet controller and a SGTL5000 audio codec. Furthermore, there is a Kinetis MK20DN512 companion micro controller for analogue, CAN and resistive touch functionality which is not yet supported. Anything that is not self contained on the module is disabled by default. The device tree for the Evaluation Board includes the module's device tree and enables the supported peripherals of the carrier board (the Evaluation Board supports almost all of them). Signed-off-by:
Marcel Ziswiler <marcel.ziswiler@toradex.com> Signed-off-by:
Thierry Reding <treding@nvidia.com>
-
Marcel Ziswiler authored
Remove commas from unit addresses as suggested by Rob Herring upon me posting initial Apalis TK1 support: http://article.gmane.org/gmane.linux.ports.tegra/26608 Please keep the remaining 0, notation on the GPU node in place as a former mainline U-Boot version was looking for that particular notation in order to perform required fix-ups on it. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Tested-by:
Alexandre Courbot <acourbot@nvidia.com> Signed-off-by:
-
Stephen Warren authored
This imports v11 of "Jetson TK1 Development Platform Pin Mux" from https://developer.nvidia.com/embedded/downloads . The new version defines the mux option for the MIPI pad ctrl selection. The OWR pin no longer has an entry in the configuration table because the only mux option it support is OWR, that feature isn't supported, and hence can't conflict with any other pin. This pin can only usefully be used as a GPIO. Signed-off-by:
-
Thierry Reding authored
This seems to have been copied and pasted since the beginning of time, though only until Tegra124, likely because that DT was written from scratch or it was fixed along the way. Signed-off-by: -
Thierry Reding authored
Add unit-addresses to nodes that have a reg property to avoid warnings on newer versions of DTC. Signed-off-by:
-
- May 28, 2016
-
-
George Spelvin authored
This will improve the performance of hash_32() and hash_64(), but due to complete lack of multi-bit shift instructions on H8, performance will still be bad in surrounding code. Designing H8-specific hash algorithms to work around that is a separate project. (But if the maintainers would like to get in touch...) Signed-off-by:George Spelvin <linux@sciencehorizons.net> Cc: Yoshinori Sato <ysato@users.sourceforge.jp> Cc: uclinux-h8-devel@lists.sourceforge.jp
-
George Spelvin authored
Microblaze is an FPGA soft core that can be configured various ways. If it is configured without a multiplier, the standard __hash_32() will require a call to __mulsi3, which is a slow software loop. Instead, use a shift-and-add sequence for the constant multiply. GCC knows how to do this, but it's not as clever as some. Signed-off-by: -
George Spelvin authored
This provides a multiply by constant GOLDEN_RATIO_32 = 0x61C88647 for the original mc68000, which lacks a 32x32-bit multiply instruction. Yes, the amount of optimization effort put in is excessive. :-) Shift-add chain found by Yevgen Voronenko's Hcub algorithm at http://spiral.ece.cmu.edu/mcm/gen.html Signed-off-by:
-
George Spelvin authored
This is just the infrastructure; there are no users yet. This is modelled on CONFIG_ARCH_RANDOM; a CONFIG_ symbol declares the existence of <asm/hash.h>. That file may define its own versions of various functions, and define HAVE_* symbols (no CONFIG_ prefix!) to suppress the generic ones. Included is a self-test (in lib/test_hash.c) that verifies the basics. It is NOT in general required that the arch-specific functions compute the same thing as the generic, but if a HAVE_* symbol is defined with the value 1, then equality is tested. Signed-off-by: -
Anna-Maria Gleixner authored
The corresponding FROZEN hotplug notifier transitions used on suspend/resume are ignored. Therefore the switch case action argument is masked with the frozen hotplug notifier transition mask. Signed-off-by:
Anna-Maria Gleixner <anna-maria@linutronix.de> Cc: linux-mips@linux-mips.org Cc: linux-kernel@vger.kernel.org Cc: rt@linutronix.de Patchwork: https://patchwork.linux-mips.org/patch/13351/ Signed-off-by:
Ralf Baechle <ralf@linux-mips.org>
-
James Hogan authored
MicroMIPS kernels may be expected to run on microMIPS only cores which don't support the normal MIPS instruction set, so be sure to pass the -mmicromips flag through to the VDSO cflags. Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Signed-off-by:
James Hogan <james.hogan@imgtec.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: linux-mips@linux-mips.org Cc: <stable@vger.kernel.org> # 4.4.x- Patchwork: https://patchwork.linux-mips.org/patch/13349/ Signed-off-by:
-
James Hogan authored
In microMIPS kernels, handle_signal() sets the isa16 mode bit in the vdso address so that the sigreturn trampolines (which are offset from the VDSO) get executed as microMIPS. However commit ebb5e78c ("MIPS: Initial implementation of a VDSO") changed the offsets to come from the VDSO image, which already have the isa16 mode bit set correctly since they're extracted from the VDSO shared library symbol table. Drop the isa16 mode bit handling from handle_signal() to fix sigreturn for cores which support both microMIPS and normal MIPS. This doesn't fix microMIPS only cores, since the VDSO is still built for normal MIPS, but thats a separate problem. Fixes: ebb5e78c ("MIPS: Initial implementation of a VDSO") Signed-off-by:
-
Antony Pavlov authored
Here is the quote from [1]: The unit-address must match the first address specified in the reg property of the node. If the node has no reg property, the @ and unit-address must be omitted and the node-name alone differentiates the node from other nodes at the same level This patch adjusts MIPS dts-files and devicetree binding documentation in accordance with [1]. [1] Power.org(tm) Standard for Embedded Power Architecture(tm) Platform Requirements (ePAPR). Version 1.1 – 08 April 2011. Chapter 2.2.1.1 Node Name Requirements Signed-off-by:Antony Pavlov <antonynpavlov@gmail.com> Cc: Paul Burton <paul.burton@imgtec.com> Cc: Zubair Lutfullah Kakakhel <Zubair.Kakakhel@imgtec.com> Cc: Rob Herring <robh+dt@kernel.org> Cc: Pawel Moll <pawel.moll@arm.com> Cc: Mark Rutland <mark.rutland@arm.com> Cc: Ian Campbell <ijc+devicetree@hellion.org.uk> Cc: Kumar Gala <galak@codeaurora.org> Cc: linux-mips@linux-mips.org Cc: devicetree@vger.kernel.org Cc: linux-kernel@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/13345/ Acked-by:
Rob Herring <robh@kernel.org> Signed-off-by:
-
Maciej W. Rozycki authored
Avoid an aliasing issue causing a build error in VDSO: In file included from include/linux/srcu.h:34:0, from include/linux/notifier.h:15, from ./arch/mips/include/asm/uprobes.h:9, from include/linux/uprobes.h:61, from include/linux/mm_types.h:13, from ./arch/mips/include/asm/vdso.h:14, from arch/mips/vdso/vdso.h:27, from arch/mips/vdso/gettimeofday.c:11: include/linux/workqueue.h: In function 'work_static': include/linux/workqueue.h:186:2: error: dereferencing type-punned pointer will break strict-aliasing rules [-Werror=strict-aliasing] return *work_data_bits(work) & WORK_STRUCT_STATIC; ^ cc1: all warnings being treated as errors make[2]: *** [arch/mips/vdso/gettimeofday.o] Error 1 with a CONFIG_DEBUG_OBJECTS_WORK configuration and GCC 5.2.0. Include `-fno-strict-aliasing' along with compiler options used, as required for kernel code, fixing a problem present since the introduction of VDSO with commit ebb5e78c ("MIPS: Initial implementation of a VDSO"). Thanks to Tejun for diagnosing this properly! Signed-off-by:Maciej W. Rozycki <macro@imgtec.com> Reviewed-by:
-
Matt Redfearn authored
Allow KASLR to be selected on Pistachio based systems. Tested on a Creator Ci40. Signed-off-by:
Matt Redfearn <matt.redfearn@imgtec.com> Reviewed-by:
-
Harvey Hunt authored
On certain MIPS32 devices, the ftrace tracer "function_graph" uses __lshrdi3() during the capturing of trace data. ftrace then attempts to trace __lshrdi3() which leads to infinite recursion and a stack overflow. Fix this by marking __lshrdi3() as notrace. Mark the other compiler intrinsics as notrace in case the compiler decides to use them in the ftrace path. Signed-off-by:
Harvey Hunt <harvey.hunt@imgtec.com> Cc: <linux-mips@linux-mips.org> Cc: <linux-kernel@vger.kernel.org> Cc: <stable@vger.kernel.org> # 4.2.x- Patchwork: https://patchwork.linux-mips.org/patch/13354/ Signed-off-by:
-
James Hogan authored
The Hardware page Table Walker (HTW) is being misconfigured on 64-bit kernels. The PWSize.PS (pointer size) bit determines whether pointers within directories are loaded as 32-bit or 64-bit addresses, but was never being set to 1 for 64-bit kernels where the unsigned long in pgd_t is 64-bits wide. This actually reduces rather than improves performance when the HTW is enabled on P6600 since the HTW is initiated lots, but walks are all aborted due I think to bad intermediate pointers. Since we were already taking the width of the PTEs into account by setting PWSize.PTEW, which is the left shift applied to the page table index *in addition to* the native pointer size, we also need to reduce PTEW by 1 when PS=1. This is done by calculating PTEW based on the relative size of pte_t compared to pgd_t. Finally in order for the HTW to be used when PS=1, the appropriate XK/XS/XU bits corresponding to the different 64-bit segments need to be set in PWCtl. We enable only XU for now to enable walking for XUSeg. Supporting walking for XKSeg would be a bit more involved so is left for a future patch. It would either require the use of a per-CPU top level base directory if supported by the HTW (a bit like pgd_current but with a second entry pointing at swapper_pg_dir), or the HTW would prepend bit 63 of the address to the global directory index which doesn't really match how we split user and kernel page directories. Fixes: cab25bc7 ("MIPS: Extend hardware table walking support to MIPS64") Signed-off-by:
-
James Hogan authored
Add field definitions for some of the 64-bit specific Hardware page Table Walker (HTW) register fields in PWSize and PWCtl, in preparation for fixing the 64-bit HTW configuration. Also print these fields out along with the others in print_htw_config(). Signed-off-by:
-
James Hogan authored
Simplify the DSP instruction wrapper macros which use explicit encodings for microMIPS and normal MIPS by using the new encoding macros and removing duplication. To me this makes it easier to read since it is much shorter, but it also ensures .insn is used, preventing objdump disassembling the microMIPS code as normal MIPS. Signed-off-by:
-
James Hogan authored
Hardcoded MIPS instruction encodings are provided for tlbinvf, mfhc0 & mthc0 instructions, but microMIPS encodings are missing. I doubt any microMIPS cores exist at present which support these instructions, but the microMIPS encodings exist, and microMIPS cores may support them in the future. Add the missing microMIPS encodings using the new macros. Signed-off-by:
-
James Hogan authored
When the toolchain doesn't support MSA we encode MSA instructions explicitly in assembly. Unfortunately we use .word for both MIPS and microMIPS encodings which is wrong, since 32-bit microMIPS instructions are made up from a pair of halfwords. - The most significant halfword always comes first, so for little endian builds the halves will be emitted in the wrong order. - 32-bit alignment isn't guaranteed, so the assembler may insert a 16-bit nop instruction to pad the instruction stream to a 32-bit boundary. Use the new instruction encoding macros to encode microMIPS MSA instructions correctly. Fixes: d96cc3d1 ("MIPS: Add microMIPS MSA support.") Signed-off-by:
-
James Hogan authored
Toolchains may be used which support microMIPS but not VZ instructions (i.e. binutis 2.22 & 2.23), so extend the explicitly encoded versions of the guest COP0 register & guest TLB access macros to support microMIPS encodings too, using the new macros. This prevents non-microMIPS instructions being executed in microMIPS mode during CPU probe on cores supporting VZ (e.g. M5150), which cause reserved instruction exceptions early during boot. Fixes: bad50d79 ("MIPS: Fix VZ probe gas errors with binutils <2.24") Signed-off-by:
-
James Hogan authored
To allow simplification of macros which use inline assembly to explicitly encode instructions, add a few simple abstractions to mipsregs.h which expand to specific microMIPS or normal MIPS encodings depending on what type of kernel is being built: _ASM_INSN_IF_MIPS(_enc) : Emit a 32bit MIPS instruction if microMIPS is not enabled. _ASM_INSN32_IF_MM(_enc) : Emit a 32bit microMIPS instruction if enabled. _ASM_INSN16_IF_MM(_enc) : Emit a 16bit microMIPS instruction if enabled. The macros can be used one after another since the MIPS / microMIPS macros are mutually exclusive, for example: __asm__ __volatile__( ".set push\n\t" ".set noat\n\t" "# mfgc0 $1, $%1, %2\n\t" _ASM_INSN_IF_MIPS(0x40610000 | %1 << 11 | %2) _ASM_INSN32_IF_MM(0x002004fc | %1 << 16 | %2 << 11) "move %0, $1\n\t" ".set pop" : "=r" (__res) : "i" (source), "i" (sel)); Signed-off-by: -
Ralf Baechle authored
As noticed by Sergei in the discussion of Andrea Gelmini's patch series. Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
-
Andrea Gelmini authored
Signed-off-by:
Andrea Gelmini <andrea.gelmini@gelma.net> Cc: trivial@kernel.org Cc: linux-mips@linux-mips.org Patchwork: https://patchwork.linux-mips.org/patch/13338/ Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Andrea Gelmini authored
Signed-off-by:
-
Dan Carpenter authored
These should be ">=" instead of ">" or we go past the end of the pvc_lines[] array. Signed-off-by:
Dan Carpenter <dan.carpenter@oracle.com> Cc: linux-mips@linux-mips.org Cc: kernel-janitors@vger.kernel.org Patchwork: https://patchwork.linux-mips.org/patch/6124/ Signed-off-by:
-
