Add a boot wrapper script function run_cmd which will run a shell command
quietly and only print the output if either V=1 or an error occurs.

Also, run the ps3 dd commands with run_cmd to clean up the build output.

Signed-off-by: Geoff Levand <geoff@infradead.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

of_get_property() is used inside the loop, but then the reference to the
node is dropped before dereferencing the prop pointer, which could by then
point to junk if the node has been freed.

Instead use of_property_read_u32() to actually read the property
value before dropping the reference.

of_property_read_u32() requires at least one cell (u32) to be present,
which is stricter than the old logic which would happily dereference a
property of any size. However we believe all device trees in the wild
have at least one cell.

Skiboot may produce memory nodes with more than one cell, but that is
OK, of_property_read_u32() will return the first one.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
[mpe: Expand change log with device tree details]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The TUNE_CELL option allows you to build a kernel that runs on multiple
CPUs but is tuned (ie. optimised) to run on Cell CPUs. Now days no one
is building a distro in that fashion, and any users who are building
custom kernels for their Cell machines are better off building with
CONFIG_CELL_CPU, which builds a kernel that only runs on Cell and
therefore can be optimised even more aggresively.

Dropping the option also avoids confusing other users, who are presented
with an option to tune for Cell when they are not building for a Cell
CPU at all.

Suggested-by: Thomas Huth <thuth@redhat.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

EBB (Event Based Branches) are currently only available on POWER8, so we
should skip them on other CPUs.

I've found that at least one test loops forever on 970MP (cycles_with_freeze_test).

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
[mpe: Minor change log editing, add skip to cpu_event_vs_ebb_test]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When building against older kernel headers, currently the tm-syscall
test fails to build because PPC_FEATURE2_HTM_NOSC is not defined.

Tweak the test so that if PPC_FEATURE2_HTM_NOSC is not defined it still
builds, but prints a warning at run time and marks the test as skipped.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This list has gotten too long. Split it into individual lines and sort
them, so in future we can add new entries more cleanly.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This is just a simple test which confirms that the individual IPC
syscalls are all available.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch adds a set of new elements to the existing PACA dump list
inside an xmon session which can be listed below improving the overall
xmon debug support.

With this patch, a typical xmon PACA dump looks something like this.

paca for cpu 0x0 @ c00000000fdc0000:
 possible             = yes
 present              = yes
 online               = yes
 lock_token           = 0x8000            	(0xa)
 paca_index           = 0x0               	(0x8)
 kernel_toc           = 0xc000000001393200	(0x10)
 kernelbase           = 0xc000000000000000	(0x18)
 kernel_msr           = 0xb000000000001033	(0x20)
 emergency_sp         = 0xc00000003fff0000	(0x28)
 mc_emergency_sp      = 0xc00000003ffec000	(0x2e0)
 in_mce               = 0x0               	(0x2e8)
 hmi_event_available  = 0x0               	(0x2ea)
 data_offset          = 0x1fe7b0000       	(0x30)
 hw_cpu_id            = 0x0               	(0x38)
 cpu_start            = 0x1               	(0x3a)
 kexec_state          = 0x0               	(0x3b)
 slb_shadow[0]:       = 0xc000000008000000 0x40016e7779000510
 slb_shadow[1]:       = 0xd000000008000001 0x400142add1000510
 vmalloc_sllp         = 0x510             	(0x1b8)
 slb_cache_ptr        = 0x4               	(0x1ba)
 slb_cache[0]:        = 0x000000000003f000
 slb_cache[1]:        = 0x0000000000000001
 slb_cache[2]:        = 0x0000000000000003
 slb_cache[3]:        = 0x0000000000001000
 slb_cache[4]:        = 0x0000000000001000
 slb_cache[5]:        = 0x0000000000000000
 slb_cache[6]:        = 0x0000000000000000
 slb_cache[7]:        = 0x0000000000000000
 dscr_default         = 0x0               	(0x58)
 __current            = 0xc000000001331e80	(0x290)
 kstack               = 0xc000000001393e30	(0x298)
 stab_rr              = 0x11              	(0x2a0)
 saved_r1             = 0xc0000001fffef5e0	(0x2a8)
 trap_save            = 0x0               	(0x2b8)
 soft_enabled         = 0x0               	(0x2ba)
 irq_happened         = 0x1               	(0x2bb)
 io_sync              = 0x0               	(0x2bc)
 irq_work_pending     = 0x0               	(0x2bd)
 nap_state_lost       = 0x0               	(0x2be)
 sprg_vdso            = 0x0               	(0x2c0)
 tm_scratch           = 0x8000000100009033	(0x2c8)
 core_idle_state_ptr  = (null)            	(0x2d0)
 thread_idle_state    = 0x0               	(0x2d8)
 thread_mask          = 0x0               	(0x2d9)
 subcore_sibling_mask = 0x0               	(0x2da)
 user_time            = 0x0               	(0x2f0)
 system_time          = 0x0               	(0x2f8)
 user_time_scaled     = 0x0               	(0x300)
 starttime            = 0x3f462418b5cf4   	(0x308)
 starttime_user       = 0x3f4622a57092a   	(0x310)
 startspurr           = 0xd62a5718        	(0x318)
 utime_sspurr         = 0x0               	(0x320)
 stolen_time          = 0x0               	(0x328)

Signed-off-by: Anshuman Khandual <khandual@linux.vnet.ibm.com>
[mpe: Endian swap slb_shadow before display, minor formatting]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The kernel log buffer is often much longer than the size of a terminal
so paginate it's output.

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The paca display is already more than 24 lines, which can be problematic
if you have an old school 80x24 terminal, or more likely you are on a
virtual terminal which does not scroll for whatever reason.

This patch adds a new command "#", which takes a single (hex) numeric
argument: lines per page. It will cause the output of "dp" and "dpa"
to be broken into pages, if necessary.

Sample output:

0:mon> # 10
0:mon> dp1
paca for cpu 0x1 @ c00000000fdc0480:
 possible         = yes
 present          = yes
 online           = yes
 lock_token       = 0x8000            	(0x8)
 paca_index       = 0x1               	(0xa)
 kernel_toc       = 0xc000000000eb2400	(0x10)
 kernelbase       = 0xc000000000000000	(0x18)
 kernel_msr       = 0xb000000000001032	(0x20)
 emergency_sp     = 0xc00000003ffe8000	(0x28)
 mc_emergency_sp  = 0xc00000003ffe4000	(0x2e0)
 in_mce           = 0x0               	(0x2e8)
 data_offset      = 0x7f170000        	(0x30)
 hw_cpu_id        = 0x8               	(0x38)
 cpu_start        = 0x1               	(0x3a)
 kexec_state      = 0x0               	(0x3b)
[Hit a key (a:all, q:truncate, any:next page)]
0:mon>
 __current        = 0xc00000007e696620	(0x290)
 kstack           = 0xc00000007e6ebe30	(0x298)
 stab_rr          = 0xb               	(0x2a0)
 saved_r1         = 0xc00000007ef37860	(0x2a8)
 trap_save        = 0x0               	(0x2b8)
 soft_enabled     = 0x0               	(0x2ba)
 irq_happened     = 0x1               	(0x2bb)
 io_sync          = 0x0               	(0x2bc)
 irq_work_pending = 0x0               	(0x2bd)
 nap_state_lost   = 0x0               	(0x2be)
0:mon>

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
[mpe: Use bool, make some variables static]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

of_get_next_parent can be used to simplify the while() loop and
avoid the need of a temp variable.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

of_get_next_parent can be used to simplify the while() loop and
avoid the need of a temp variable.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In commit 3c8464a9 ("powerpc:
Delete old PrPMC 280/2800 support") we got rid of most of the C
code, and the Makefile/Kconfig hooks, but it seems I left the
platform's DTS file orphaned in the tree as well as the boot code.
Here we get rid of them both.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Signed-off-by: Paul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

CONFIG_INPUT_KEYBDEV does not exist and no additional keyboard-specific
options are needed to get the keyboard working.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

.exit.text is discarded at run time and there are some references from
that to .exit.data, so we need to discard .exit.data at run time as well.

Fixes these errors:

`.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o
`.exit.data' referenced in section `.exit.text' of drivers/built-in.o: defined in discarded section `.exit.data' of drivers/built-in.o

Signed-off-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

No need to have two atomic opertions (update and fetch/check) when
decreasing PE's number of passed devices as one atomic operation
is enough.

Signed-off-by: Gavin Shan <gwshan@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

When adding a vPHB in cxl_pci_vphb_add(), we allocate a pci_controller
struct using pcibios_alloc_controller(). However, we don't free it in
cxl_pci_vphb_remove(), causing a leak.

Call pcibios_free_controller() in cxl_pci_vphb_remove() to free the vPHB
data structure correctly.

Signed-off-by: Daniel Axtens <dja@axtens.net>
Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Export pcibios_free_controller(), so it can be used by the cxl module to
free virtual PHBs.

Signed-off-by: Andrew Donnellan <andrew.donnellan@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This patch provides individual system call numbers for the following
System V IPC system calls, on PowerPC, so that they do not need to be
multiplexed:
* semop, semget, semctl, semtimedop
* msgsnd, msgrcv, msgget, msgctl
* shmat, shmdt, shmget, shmctl

Signed-off-by: Sam Bobroff <sam.bobroff@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Now that pseries selects PCI_MSI && PCI, EEH will always be true, and
therefore CONFIG_PSERIES_MSI will always be true. So drop it, and move
msi.o to obj-y.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Make it entirely clear in the Makefile that we always build the pci
related files by moving them to obj-y.

Note that CONFIG_EEH is now always enabled on pseries, because it
depends on PSERIES && PCI.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Now that we always have CONFIG_PCI=y for pseries, we can stop guarding
code with CONFIG_PCI ifdefs.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The pseries build with PCI=n looks to have been broken for at least 5
years, and no one's noticed or cared.

Following the obvious breakages backward, the first commit I can find
that builds is the parent of 2eb4afb6 ("powerpc/pci: Move pseries
code into pseries platform specific area") from April 2009.

A distro would never ship a PCI=n kernel, so it is only useful for folks
building custom kernels. Also on KVM the virtio devices appear on PCI,
so it would only be useful if you were building kernels specifically to
run on PowerVM and with no PCI devices.

The added code complexity, and testing load (which we've clearly not
been doing), is not justified by the small reduction in kernel size for
such a niche use case.

So just make PCI non-optional on pseries.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

My recent commit d2036f30 ("scripts/kconfig/Makefile: Allow
KBUILD_DEFCONFIG to be a target"), contained a bug in that when it
checks if KBUILD_DEFCONFIG is a file it forgets to prepend $(srctree) to
the path.

This causes the build to fail when building out of tree (with O=), and
when the value of KBUILD_DEFCONFIG is 'defconfig'. In that case we will
fail to find the 'defconfig' file, because we look in the build
directory not $(srctree), and so we will call Make again with
'defconfig' as the target. From there we loop infinitely calling 'make
defconfig' again and again.

The fix is simple, we need to look for the file under $(srctree).

Fixes: d2036f30 ("scripts/kconfig/Makefile: Allow KBUILD_DEFCONFIG to be a target")
Reported-by: Olof Johansson <olof@lixom.net>
Acked-by: Michal Marek <mmarek@suse.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

We need to properly identify whether a hugepage is an explicit or
a transparent hugepage in follow_huge_addr(). We used to depend
on hugepage shift argument to do that. But in some case that can
result in wrong results. For ex:

On finding a transparent hugepage we set hugepage shift to PMD_SHIFT.
But we can end up clearing the thp pte, via pmdp_huge_get_and_clear.
We do prevent reusing the pfn page via the usage of
kick_all_cpus_sync(). But that happens after we updated the pte to 0.
Hence in follow_huge_addr() we can find hugepage shift set, but transparent
huge page check fail for a thp pte.

NOTE: We fixed a variant of this race against thp split in commit
691e95fd
("powerpc/mm/thp: Make page table walk safe against thp split/collapse")

Without this patch, we may hit the BUG_ON(flags & FOLL_GET) in
follow_page_mask occasionally.

In the long term, we may want to switch ppc64 64k page size config to
enable CONFIG_ARCH_WANT_GENERAL_HUGETLB

Reported-by: David Gibson <david@gibson.dropbear.id.au>
Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

After commit e2b3d202
("powerpc: Switch 16GB and 16MB explicit hugepages to a
different page table format"), we don't need to support
is_hugepd() for 64K page size.

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

pi_buff is being memset before it is sanity checked. Move the
memset after the null pi_buff sanity check to avoid an oops.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

This avoid errors like

        unsigned int usize = 1 << 30;
        int size = 1 << 30;
        unsigned long addr = 64UL << 30 ;

        value = _ALIGN_DOWN(addr, usize); -> 0
        value = _ALIGN_DOWN(addr, size);  -> 0x1000000000

Signed-off-by: Aneesh Kumar K.V <aneesh.kumar@linux.vnet.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Always include a timeout when waiting for secondary cpus to enter OPAL
in the kexec path, rather than only when crashing.

Signed-off-by: Samuel Mendoza-Jonas <sam.mj@au1.ibm.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

show_interrupts() expects the irq_chip name to be max 8 characters
otherwise everything get misaligned

# cat /proc/interrupts
           CPU0
 17:          0   CPM PIC   0 Level     error
 19:          0  MPC8XX SIU  15 Level     tbint
 20:         90   CPM PIC   4 Level     cpm_uart
 38:      29746  MPC8XX SIU   5 Level     fs_enet-mac
 39:          0  MPC8XX SIU   7 Level     fs_enet-mac
 47:        401   CPM PIC   5 Level     fsl_spi
 68:          1  MPC8XX SIU   2 Level     phy_interrupt, phy_interrupt, phy_interrupt
LOC:    7225485   Local timer interrupts for timer event device
LOC:          9   Local timer interrupts for others
SPU:          0   Spurious interrupts
PMI:          0   Performance monitoring interrupts
MCE:          0   Machine check exceptions

Signed-off-by: Christophe Leroy <christophe.leroy@c-s.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

During the MSI bitmap test on boot kmemleak spews the following trace:

unreferenced object 0xc00000016e86c900 (size 64):
    comm "swapper/0", pid 1, jiffies 4294893173 (age 518.024s)
    hex dump (first 32 bytes):
	00 00 01 ff 7f ff 7f 37 00 00 00 00 00 00 00 00
	.......7........
	ff ff ff ff ff ff ff ff 01 ff ff ff ff
	ff ff ff
	................
	backtrace:
	[<c00000000003eebc>] .zalloc_maybe_bootmem+0x3c/0x380
	[<c000000000042d6c>] .msi_bitmap_alloc+0x3c/0xb0
	[<c000000000a9aff8>] .msi_bitmap_selftest+0x30/0x2b4
	[<c0000000000090f4>] .do_one_initcall+0xd4/0x270
	[<c000000000a8e250>] .kernel_init_freeable+0x1a0/0x280
	[<c000000000009b5c>] .kernel_init+0x1c/0x120
	[<c000000000007fbc>] .ret_from_kernel_thread+0x58/0x9c

Add a flag to msi_bitmap for tracking allocations from slab and memblock
so we can properly free/handle memory in msi_bitmap_free().

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
[mpe: Reword changelog & use bitmap_from_slab in the if]
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The derive_parent() has similar semantics to what we have in newly introduced
of_helpers module. The replacement reduces code base and propagates the actual
error code to the caller.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In case we have node without '/' strrchr() returns NULL which might lead to
crash. Replace strrchr() by kbasename() and modify condition to avoid such
behaviour.

Suggested-by: Segher Boessenkool <segher@kernel.crashing.org>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

The helper kstrndup() will do the same in one line.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

In case we have a full node name like /foo/bar and /foo is not found the
parent_path left unfreed. So, free a memory before return to a caller.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Extract a new module to share the code between other modules.

There is no functional change.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Fix the memory leak in create_gatt_table:
we've lost a kfree on the exit path for the pages array allocated
in uninorth_create_gatt_table

Signed-off-by: Denis Kirjanov <kda@linux-powerpc.org>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

'nvram_create_os_partition' should be 'nvram_create_partition'.
Use __func__ to have it right, as done elsewhere in this file.

Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

If 'nvram_write_header' fails, then 'new_part' should be freed, otherwise,
there is a memory leak.

Signed-off-by: Christophe Jaillet <christophe.jaillet@wanadoo.fr>
Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>

Based directly on ppc64_defconfig using merge_config.

Signed-off-by: Michael Ellerman <mpe@ellerman.id.au>