There is a bug in the TDP MMU function to zap SPTEs which could be
replaced with a larger mapping which prevents the function from doing
anything. Fix this by correctly zapping the last level SPTEs.

Cc: stable@vger.kernel.org
Fixes: 14881998 ("kvm: x86/mmu: Support disabling dirty logging for the tdp MMU")
Signed-off-by: Ben Gardon <bgardon@google.com>
Message-Id: <20210202185734.1680553-11-bgardon@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

If not in long mode, the low bits of CR3 are reserved but not enforced to
be zero, so remove those checks.  If in long mode, however, the MBZ bits
extend down to the highest physical address bit of the guest, excluding
the encryption bit.

Make the checks consistent with the above, and match them between
nested_vmcb_checks and KVM_SET_SREGS.

Cc: stable@vger.kernel.org
Fixes: 761e4169 ("KVM: nSVM: Check that MBZ bits in CR3 and CR4 are not set on vmrun of nested guests")
Fixes: a780a3ea ("KVM: X86: Fix reserved bits check for MOV to CR3")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Don't let KVM load when running as an SEV guest, regardless of what
CPUID says.  Memory is encrypted with a key that is not accessible to
the host (L0), thus it's impossible for L0 to emulate SVM, e.g. it'll
see garbage when reading the VMCB.

Technically, KVM could decrypt all memory that needs to be accessible to
the L0 and use shadow paging so that L0 does not need to shadow NPT, but
exposing such information to L0 largely defeats the purpose of running as
an SEV guest.  This can always be revisited if someone comes up with a
use case for running VMs inside SEV guests.

Note, VMLOAD, VMRUN, etc... will also #GP on GPAs with C-bit set, i.e. KVM
is doomed even if the SEV guest is debuggable and the hypervisor is willing
to decrypt the VMCB.  This may or may not be fixed on CPUs that have the
SVME_ADDR_CHK fix.

Cc: stable@vger.kernel.org
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210202212017.2486595-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Set the emulator context to PROT64 if SYSENTER transitions from 32-bit
userspace (compat mode) to a 64-bit kernel, otherwise the RIP update at
the end of x86_emulate_insn() will incorrectly truncate the new RIP.

Note, this bug is mostly limited to running an Intel virtual CPU model on
an AMD physical CPU, as other combinations of virtual and physical CPUs
do not trigger full emulation.  On Intel CPUs, SYSENTER in compatibility
mode is legal, and unconditionally transitions to 64-bit mode.  On AMD
CPUs, SYSENTER is illegal in compatibility mode and #UDs.  If the vCPU is
AMD, KVM injects a #UD on SYSENTER in compat mode.  If the pCPU is Intel,
SYSENTER will execute natively and not trigger #UD->VM-Exit (ignoring
guest TLB shenanigans).

Fixes: fede8076 ("KVM: x86: handle wrap around 32-bit address space")
Cc: stable@vger.kernel.org
Signed-off-by: Jonny Barker <jonny@jonnybarker.com>
[sean: wrote changelog]
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210202165546.2390296-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Commit 7a873e45 ("KVM: selftests: Verify supported CR4 bits can be set
before KVM_SET_CPUID2") reveals that KVM allows to set X86_CR4_PCIDE even
when PCID support is missing:

==== Test Assertion Failure ====
  x86_64/set_sregs_test.c:41: rc
  pid=6956 tid=6956 - Invalid argument
     1	0x000000000040177d: test_cr4_feature_bit at set_sregs_test.c:41
     2	0x00000000004014fc: main at set_sregs_test.c:119
     3	0x00007f2d9346d041: ?? ??:0
     4	0x000000000040164d: _start at ??:?
  KVM allowed unsupported CR4 bit (0x20000)

Add X86_FEATURE_PCID feature check to __cr4_reserved_bits() to make
kvm_is_valid_cr4() fail.

Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Message-Id: <20210201142843.108190-1-vkuznets@redhat.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Wanpeng Li <wanpengli@tencent.com>
Cc: kvm@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Signed-off-by: Zheng Zhan Liang <zhengzhanliang@huorong.cn>
Message-Id: <20210201055310.267029-1-zhengzhanliang@huorong.cn>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Userspace that does not know about KVM_GET_MSR_FEATURE_INDEX_LIST
will generally use the default value for MSR_IA32_ARCH_CAPABILITIES.
When this happens and the host has tsx=on, it is possible to end up with
virtual machines that have HLE and RTM disabled, but TSX_CTRL available.

If the fleet is then switched to tsx=off, kvm_get_arch_capabilities()
will clear the ARCH_CAP_TSX_CTRL_MSR bit and it will not be possible to
use the tsx=off hosts as migration destinations, even though the guests
do not have TSX enabled.

To allow this migration, allow guests to write to their TSX_CTRL MSR,
while keeping the host MSR unchanged for the entire life of the guests.
This ensures that TSX remains disabled and also saves MSR reads and
writes, and it's okay to do because with tsx=off we know that guests will
not have the HLE and RTM features in their CPUID.  (If userspace sets
bogus CPUID data, we do not expect HLE and RTM to work in guests anyway).

Cc: stable@vger.kernel.org
Fixes: cbbaa272 ("KVM: x86: fix presentation of TSX feature in ARCH_CAPABILITIES")
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Grab kvm->lock before pinning memory when registering an encrypted
region; sev_pin_memory() relies on kvm->lock being held to ensure
correctness when checking and updating the number of pinned pages.

Add a lockdep assertion to help prevent future regressions.

Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: "H. Peter Anvin" <hpa@zytor.com>
Cc: Paolo Bonzini <pbonzini@redhat.com>
Cc: Joerg Roedel <joro@8bytes.org>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Sean Christopherson <seanjc@google.com>
Cc: x86@kernel.org
Cc: kvm@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Fixes: 1e80fdc0 ("KVM: SVM: Pin guest memory when SEV is active")
Signed-off-by: Peter Gonda <pgonda@google.com>

V2
 - Fix up patch description
 - Correct file paths svm.c -> sev.c
 - Add unlock of kvm->lock on sev_pin_memory error

V1
 - https://lore.kernel.org/kvm/20210126185431.1824530-1-pgonda@google.com/



Message-Id: <20210127161524.2832400-1-pgonda@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Nested VMX was enabled by default in commit 1e58e5e5 ("KVM:
VMX: enable nested virtualization by default"), which was merged
in Linux 4.20. This patch is to fix the documentation accordingly.

Signed-off-by: Yu Zhang <yu.c.zhang@linux.intel.com>
Message-Id: <20210128154747.4242-1-yu.c.zhang@linux.intel.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-5.11-3' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.11, take #3

- Avoid clobbering extra registers on initialisation

Recent commit 255cbecf modified struct kvm_vcpu_arch to make
'cpuid_entries' a pointer to an array of kvm_cpuid_entry2 entries
rather than embedding the array in the struct. KVM_SET_CPUID and
KVM_SET_CPUID2 were updated accordingly, but KVM_GET_CPUID2 was missed.

As a result, KVM_GET_CPUID2 currently returns random fields from struct
kvm_vcpu_arch to userspace rather than the expected CPUID values. Fix
this by treating 'cpuid_entries' as a pointer when copying its
contents to userspace buffer.

Fixes: 255cbecf ("KVM: x86: allocate vcpu->arch.cpuid_entries dynamically")
Cc: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: Michael Roth <michael.roth@amd.com.com>
Message-Id: <20210128024451.1816770-1-michael.roth@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

VMX also uses KVM_REQ_GET_NESTED_STATE_PAGES for the Hyper-V eVMCS,
which may need to be loaded outside guest mode.  Therefore we cannot
WARN in that case.

However, that part of nested_get_vmcs12_pages is _not_ needed at
vmentry time.  Split it out of KVM_REQ_GET_NESTED_STATE_PAGES handling,
so that both vmentry and migration (and in the latter case, independent
of is_guest_mode) do the parts that are needed.

Cc: <stable@vger.kernel.org> # 5.10.x: f2c7ef3b: KVM: nSVM: cancel KVM_REQ_GET_NESTED_STATE_PAGES
Cc: <stable@vger.kernel.org> # 5.10.x
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Revert the dirty/available tracking of GPRs now that KVM copies the GPRs
to the GHCB on any post-VMGEXIT VMRUN, even if a GPR is not dirty.  Per
commit de3cd117 ("KVM: x86: Omit caching logic for always-available
GPRs"), tracking for GPRs noticeably impacts KVM's code footprint.

This reverts commit 1c04d8c9.

Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210122235049.3107620-3-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Drop the per-GPR dirty checks when synchronizing GPRs to the GHCB, the
GRPs' dirty bits are set from time zero and never cleared, i.e. will
always be seen as dirty.  The obvious alternative would be to clear
the dirty bits when appropriate, but removing the dirty checks is
desirable as it allows reverting GPR dirty+available tracking, which
adds overhead to all flavors of x86 VMs.

Note, unconditionally writing the GPRs in the GHCB is tacitly allowed
by the GHCB spec, which allows the hypervisor (or guest) to provide
unnecessary info; it's the guest's responsibility to consume only what
it needs (the hypervisor is untrusted after all).

  The guest and hypervisor can supply additional state if desired but
  must not rely on that additional state being provided.

Cc: Brijesh Singh <brijesh.singh@amd.com>
Cc: Tom Lendacky <thomas.lendacky@amd.com>
Fixes: 291bd20d ("KVM: SVM: Add initial support for a VMGEXIT VMEXIT")
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210122235049.3107620-2-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Even when we are outside the nested guest, some vmcs02 fields
may not be in sync vs vmcs12.  This is intentional, even across
nested VM-exit, because the sync can be delayed until the nested
hypervisor performs a VMCLEAR or a VMREAD/VMWRITE that affects those
rarely accessed fields.

However, during KVM_GET_NESTED_STATE, the vmcs12 has to be up to date to
be able to restore it.  To fix that, call copy_vmcs02_to_vmcs12_rare()
before the vmcs12 contents are copied to userspace.

Fixes: 7952d769 ("KVM: nVMX: Sync rarely accessed guest fields only when needed")
Reviewed-by: Sean Christopherson <seanjc@google.com>
Signed-off-by: Maxim Levitsky <mlevitsk@redhat.com>
Message-Id: <20210114205449.8715-2-mlevitsk@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

On VMX, if we exit and then re-enter immediately without leaving
the vmx_vcpu_run() function, the kvm_entry event is not logged.
That means we will see one (or more) kvm_exit, without its (their)
corresponding kvm_entry, as shown here:

 CPU-1979 [002] 89.871187: kvm_entry: vcpu 1
 CPU-1979 [002] 89.871218: kvm_exit:  reason MSR_WRITE
 CPU-1979 [002] 89.871259: kvm_exit:  reason MSR_WRITE

It also seems possible for a kvm_entry event to be logged, but then
we leave vmx_vcpu_run() right away (if vmx->emulation_required is
true). In this case, we will have a spurious kvm_entry event in the
trace.

Fix these situations by moving trace_kvm_entry() inside vmx_vcpu_run()
(where trace_kvm_exit() already is).

A trace obtained with this patch applied looks like this:

 CPU-14295 [000] 8388.395387: kvm_entry: vcpu 0
 CPU-14295 [000] 8388.395392: kvm_exit:  reason MSR_WRITE
 CPU-14295 [000] 8388.395393: kvm_entry: vcpu 0
 CPU-14295 [000] 8388.395503: kvm_exit:  reason EXTERNAL_INTERRUPT

Of course, not calling trace_kvm_entry() in common x86 code any
longer means that we need to adjust the SVM side of things too.

Signed-off-by: Lorenzo Brescia <lorenzo.brescia@edu.unito.it>
Signed-off-by: Dario Faggioli <dfaggioli@suse.com>
Message-Id: <160873470698.11652.13483635328769030605.stgit@Wayrath>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Update various words, including the wrong parameter name and the vague
description of the usage of "slot" field.

Signed-off-by: Zenghui Yu <yuzenghui@huawei.com>
Message-Id: <20201208043439.895-1-yuzenghui@huawei.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The injection process of smi has two steps:

    Qemu                        KVM
Step1:
    cpu->interrupt_request &= \
        ~CPU_INTERRUPT_SMI;
    kvm_vcpu_ioctl(cpu, KVM_SMI)

                                call kvm_vcpu_ioctl_smi() and
                                kvm_make_request(KVM_REQ_SMI, vcpu);

Step2:
    kvm_vcpu_ioctl(cpu, KVM_RUN, 0)

                                call process_smi() if
                                kvm_check_request(KVM_REQ_SMI, vcpu) is
                                true, mark vcpu->arch.smi_pending = true;

The vcpu->arch.smi_pending will be set true in step2, unfortunately if
vcpu paused between step1 and step2, the kvm_run->immediate_exit will be
set and vcpu has to exit to Qemu immediately during step2 before mark
vcpu->arch.smi_pending true.
During VM migration, Qemu will get the smi pending status from KVM using
KVM_GET_VCPU_EVENTS ioctl at the downtime, then the smi pending status
will be lost.

Signed-off-by: Jay Zhou <jianjay.zhou@huawei.com>
Signed-off-by: Shengen Zhuang <zhuangshengen@huawei.com>
Message-Id: <20210118084720.1585-1-jianjay.zhou@huawei.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The HW_REF_CPU_CYCLES event on the fixed counter 2 is pseudo-encoded as
0x0300 in the intel_perfmon_event_map[]. Correct its usage.

Fixes: 62079d8a ("KVM: PMU: add proper support for fixed counter 2")
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20201230081916.63417-1-like.xu@linux.intel.com>
Reviewed-by: Sean Christopherson <seanjc@google.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Since we know vPMU will not work properly when (1) the guest bit_width(s)
of the [gp|fixed] counters are greater than the host ones, or (2) guest
requested architectural events exceeds the range supported by the host, so
we can setup a smaller left shift value and refresh the guest cpuid entry,
thus fixing the following UBSAN shift-out-of-bounds warning:

shift exponent 197 is too large for 64-bit type 'long long unsigned int'

Call Trace:
 __dump_stack lib/dump_stack.c:79 [inline]
 dump_stack+0x107/0x163 lib/dump_stack.c:120
 ubsan_epilogue+0xb/0x5a lib/ubsan.c:148
 __ubsan_handle_shift_out_of_bounds.cold+0xb1/0x181 lib/ubsan.c:395
 intel_pmu_refresh.cold+0x75/0x99 arch/x86/kvm/vmx/pmu_intel.c:348
 kvm_vcpu_after_set_cpuid+0x65a/0xf80 arch/x86/kvm/cpuid.c:177
 kvm_vcpu_ioctl_set_cpuid2+0x160/0x440 arch/x86/kvm/cpuid.c:308
 kvm_arch_vcpu_ioctl+0x11b6/0x2d70 arch/x86/kvm/x86.c:4709
 kvm_vcpu_ioctl+0x7b9/0xdb0 arch/x86/kvm/../../../virt/kvm/kvm_main.c:3386
 vfs_ioctl fs/ioctl.c:48 [inline]
 __do_sys_ioctl fs/ioctl.c:753 [inline]
 __se_sys_ioctl fs/ioctl.c:739 [inline]
 __x64_sys_ioctl+0x193/0x200 fs/ioctl.c:739
 do_syscall_64+0x2d/0x70 arch/x86/entry/common.c:46
 entry_SYSCALL_64_after_hwframe+0x44/0xa9

Reported-by:  <syzbot+ae488dc136a4cc6ba32b@syzkaller.appspotmail.com>
Signed-off-by: Like Xu <like.xu@linux.intel.com>
Message-Id: <20210118025800.34620-1-like.xu@linux.intel.com>
Cc: stable@vger.kernel.org
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Add compile-time asserts in rsvd_bits() to guard against KVM passing in
garbage hardcoded values, and cap the upper bound at '63' for dynamic
values to prevent generating a mask that would overflow a u64.

Suggested-by: Paolo Bonzini <pbonzini@redhat.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-Id: <20210113204515.3473079-1-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

The documentation classifies KVM_ENABLE_CAP with KVM_CAP_ENABLE_CAP_VM
as a vcpu ioctl, which is incorrect. Fix it by specifying it as a VM
ioctl.

Fixes: e5d83c74 ("kvm: make KVM_CAP_ENABLE_CAP_VM architecture agnostic")
Signed-off-by: Quentin Perret <qperret@google.com>
Message-Id: <20210108165349.747359-1-qperret@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

Merge tag 'kvmarm-fixes-5.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/kvmarm/kvmarm into HEAD

KVM/arm64 fixes for 5.11, take #2

- Don't allow tagged pointers to point to memslots
- Filter out ARMv8.1+ PMU events on v8.0 hardware
- Hide PMU registers from userspace when no PMU is configured
- More PMU cleanups
- Don't try to handle broken PSCI firmware
- More sys_reg() to reg_to_encoding() conversions

arm_smccc_1_1_hvc() only adds write contraints for x0-3 in the inline
assembly for the HVC instruction so make sure those are the only
registers that change when __do_hyp_init is called.

Tested-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Andrew Scull <ascull@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210125145415.122439-3-ascull@google.com

The use of a tagged address could be pretty confusing for the
whole memslot infrastructure as well as the MMU notifiers.

Forbid it altogether, as it never quite worked the first place.

Cc: stable@vger.kernel.org
Reported-by: Rick Edgecombe <rick.p.edgecombe@intel.com>
Reviewed-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>

When running on v8.0 HW, make sure we don't try to advertise
events in the 0x4000-0x403f range.

Cc: stable@vger.kernel.org
Fixes: 88865bec ("KVM: arm64: Mask out filtered events in PCMEID{0,1}_EL1")
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210121105636.1478491-1-maz@kernel.org

KASAN in HW_TAGS mode will store MTE tags in the top byte of the
pointer. When computing the offset for TPIDR_EL2 we don't want anything
in the top byte, so remove the tag to ensure the computation is correct
no matter what the tag.

Fixes: 94ab5b61 ("kasan, arm64: enable CONFIG_KASAN_HW_TAGS")
Signed-off-by: Steven Price <steven.price@arm.com>
[maz: added comment]
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210108161254.53674-1-steven.price@arm.com

The reg_to_encoding() macro is a wrapper over sys_reg() and conveniently
takes a sys_reg_desc or a sys_reg_params argument and returns the 32 bit
register encoding. Use it instead of calling sys_reg() directly.

Signed-off-by: Alexandru Elisei <alexandru.elisei@arm.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20210106144218.110665-1-alexandru.elisei@arm.com

The KVM/arm64 PSCI relay assumes that SYSTEM_OFF and SYSTEM_RESET should
not return, as dictated by the PSCI spec. However, there is firmware out
there which breaks this assumption, leading to a hyp panic. Make KVM
more robust to broken firmware by allowing these to return.

Signed-off-by: David Brazdil <dbrazdil@google.com>
Signed-off-by: Marc Zyngier <maz@kernel.org>
Link: https://lore.kernel.org/r/20201229160059.64135-1-dbrazdil@google.com

Now that all PMU registers are gated behind a .visibility callback,
remove the other checks against an absent PMU.

Signed-off-by: Marc Zyngier <maz@kernel.org>

It appears that while we are now able to properly hide PMU
registers from the guest when a PMU isn't available (either
because none has been configured, the host doesn't have
the PMU support compiled in, or that the HW doesn't have
one at all), we are still exposing more than we should to
userspace.

Introduce a visibility callback gating all the PMU registers,
which covers both usrespace and guest.

Signed-off-by: Marc Zyngier <maz@kernel.org>

Merge tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild fixes from Masahiro Yamada:

 - Search for <ncurses.h> in the default header path of HOSTCC

 - Tweak the option order to be kind to old BSD awk

 - Remove 'kvmconfig' and 'xenconfig' shorthands

 - Fix documentation

* tag 'kbuild-fixes-v5.11' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild:
  Documentation: kbuild: Fix section reference
  kconfig: remove 'kvmconfig' and 'xenconfig' shorthands
  lib/raid6: Let $(UNROLL) rules work with macOS userland
  kconfig: Support building mconf with vendor sysroot ncurses
  kconfig: config script: add a little user help
  MAINTAINERS: adjust GCC PLUGINS after gcc-plugin.sh removal

Pull SCSI fixes from James Bottomley:
 "This is two driver fixes (megaraid_sas and hisi_sas).

  The megaraid one is a revert of a previous revert of a cpu hotplug fix
  which exposed a bug in the block layer which has been fixed in this
  merge window.

  The hisi_sas performance enhancement comes from switching to interrupt
  managed completion queues, which depended on the addition of
  devm_platform_get_irqs_affinity() which is now upstream via the irq
  tree in the last merge window"

* tag 'scsi-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi:
  scsi: hisi_sas: Expose HW queues for v2 hw
  Revert "Revert "scsi: megaraid_sas: Added support for shared host tagset for cpuhotplug""

Pull block fixes from Jens Axboe:

 - Missing CRC32 selections (Arnd)

 - Fix for a merge window regression with bdev inode init (Christoph)

 - bcache fixes

 - rnbd fixes

 - NVMe pull request from Christoph:
    - fix a race in the nvme-tcp send code (Sagi Grimberg)
    - fix a list corruption in an nvme-rdma error path (Israel Rukshin)
    - avoid a possible double fetch in nvme-pci (Lalithambika Krishnakumar)
    - add the susystem NQN quirk for a Samsung driver (Gopal Tiwari)
    - fix two compiler warnings in nvme-fcloop (James Smart)
    - don't call sleeping functions from irq context in nvme-fc (James Smart)
    - remove an unused argument (Max Gurtovoy)
    - remove unused exports (Minwoo Im)

 - Use-after-free fix for partition iteration (Ming)

 - Missing blk-mq debugfs flag annotation (John)

 - Bdev freeze regression fix (Satya)

 - blk-iocost NULL pointer deref fix (Tejun)

* tag 'block-5.11-2021-01-10' of git://git.kerne...

Pull io_uring fixes from Jens Axboe:
 "A bit larger than I had hoped at this point, but it's all changes that
  will be directed towards stable anyway. In detail:

   - Fix a merge window regression on error return (Matthew)

   - Remove useless variable declaration/assignment (Ye Bin)

   - IOPOLL fixes (Pavel)

   - Exit and cancelation fixes (Pavel)

   - fasync lockdep complaint fix (Pavel)

   - Ensure SQPOLL is synchronized with creator life time (Pavel)"

* tag 'io_uring-5.11-2021-01-10' of git://git.kernel.dk/linux-block:
  io_uring: stop SQPOLL submit on creator's death
  io_uring: add warn_once for io_uring_flush()
  io_uring: inline io_uring_attempt_task_drop()
  io_uring: io_rw_reissue lockdep annotations
  io_uring: synchronise ev_posted() with waitqueues
  io_uring: dont kill fasync under completion_lock
  io_uring: trigger eventfd for IOPOLL
  io_uring: Fix return value from alloc_fixed_file_ref_node
  io_uring: Delete useless variable ‘id’ in io_prep_async_work
  io_uring: cancel more aggressively in exit_work
  io_uring: drop file refs after task cancel
  io_uring: patch up IOPOLL overflow_flush sync
  io_uring: synchronise IOPOLL on task_submit fail

Pull USB fixes from Greg KH:
 "Here are a number of small USB driver fixes for 5.11-rc3.

  Include in here are:

   - USB gadget driver fixes for reported issues

   - new usb-serial driver ids

   - dma from stack bugfixes

   - typec bugfixes

   - dwc3 bugfixes

   - xhci driver bugfixes

   - other small misc usb driver bugfixes

  All of these have been in linux-next with no reported issues"

* tag 'usb-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (35 commits)
  usb: dwc3: gadget: Clear wait flag on dequeue
  usb: typec: Send uevent for num_altmodes update
  usb: typec: Fix copy paste error for NVIDIA alt-mode description
  usb: gadget: enable super speed plus
  kcov, usb: hide in_serving_softirq checks in __usb_hcd_giveback_urb
  usb: uas: Add PNY USB Portable SSD to unusual_uas
  usb: gadget: configfs: Preserve function ordering after bind failure
  usb: gadget: select CONFIG_CRC32
  usb: gadget: core: change the comment for usb_gadget_connect
  usb: gadget: configfs: Fix use-after-free issue with udc_name
  usb: dwc3: gadget: Restart DWC3 gadget when enabling pullup
  usb: usbip: vhci_hcd: protect shift size
  USB: usblp: fix DMA to stack
  USB: serial: iuu_phoenix: fix DMA from stack
  USB: serial: option: add LongSung M5710 module support
  USB: serial: option: add Quectel EM160R-GL
  USB: Gadget: dummy-hcd: Fix shift-out-of-bounds bug
  usb: gadget: f_uac2: reset wMaxPacketSize
  usb: dwc3: ulpi: Fix USB2.0 HS/FS/LS PHY suspend regression
  usb: dwc3: ulpi: Replace CPU-based busyloop with Protocol-based one
  ...

Pull staging driver fixes from Greg KH:
 "Here are some small staging driver fixes for 5.11-rc3. Nothing major,
  just resolving some reported issues:

   - cleanup some remaining mentions of the ION drivers that were
     removed in 5.11-rc1

   - comedi driver bugfix

   - two error path memory leak fixes

  All have been in linux-next for a while with no reported issues"

* tag 'staging-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  staging: ION: remove some references to CONFIG_ION
  staging: mt7621-dma: Fix a resource leak in an error handling path
  Staging: comedi: Return -EFAULT if copy_to_user() fails
  staging: spmi: hisi-spmi-controller: Fix some error handling paths

Pull char/misc driver fixes from Greg KH:
 "Here are some small char and misc driver fixes for 5.11-rc3.

  The majority here are fixes for the habanalabs drivers, but also in
  here are:

   - crypto driver fix

   - pvpanic driver fix

   - updated font file

   - interconnect driver fixes

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'char-misc-5.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (26 commits)
  Fonts: font_ter16x32: Update font with new upstream Terminus release
  misc: pvpanic: Check devm_ioport_map() for NULL
  speakup: Add github repository URL and bug tracker
  MAINTAINERS: Update Georgi's email address
  crypto: asym_tpm: correct zero out potential secrets
  habanalabs: Fix memleak in hl_device_reset
  interconnect: imx8mq: Use icc_sync_state
  interconnect: imx: Remove a useless test
  interconnect: imx: Add a missing of_node_put after of_device_is_available
  interconnect: qcom: fix rpmh link failures
  habanalabs: fix order of status check
  habanalabs: register to pci shutdown callback
  habanalabs: add validation cs counter, fix misplaced counters
  habanalabs/gaudi: retry loading TPC f/w on -EINTR
  habanalabs: adjust pci controller init to new firmware
  habanalabs: update comment in hl_boot_if.h
  habanalabs/gaudi: enhance reset message
  habanalabs: full FW hard reset support
  habanalabs/gaudi: disable CGM at HW initialization
  habanalabs: Revise comment to align with mirror list name
  ...

Section 3.11 was incorrectly called 3.9, fix it.

Signed-off-by: Viresh Kumar <viresh.kumar@linaro.org>
Signed-off-by: Masahiro Yamada <masahiroy@kernel.org>