- Sep 08, 2005
-
-
Al Viro authored
u64 is not uintptr_t; unsigned long is... Signed-off-by:
Al Viro <viro@zeniv.linux.org.uk> Signed-off-by:
Linus Torvalds <torvalds@osdl.org>
-
Linus Torvalds authored
-
Linus Torvalds authored
-
- Sep 07, 2005
-
-
Michael Krufky authored
Most of the patch is whitespace cleanup, but more importantly, this patch checks to see whether a callback is set before calling it. On cx88 boards (currently the only boards using lgdt330x in 2.6.13) every callback is set. However, newer drivers currently in development leave a callback undefined, and lgdt330x must not call it if it isn't defined. Signed-off-by:
Patrick Boettcher <pb@linuxtv.org> Signed-off-by:
Michael Krufky <mkrufky@m1k.net> Signed-off-by:
Andrew Morton <akpm@osdl.org> Signed-off-by:
-
Michael Krufky authored
Patrick Keene wrote to the linux-dvb list, asking where in menuconfig he can enable dvb-bt8xx for his AVerMedia DVB card. I pointed the following out to him: config DVB_BT8XX tristate "Nebula/Pinnacle PCTV/Twinhan PCI cards" It has been agreed upon that this description is extremely misleading. This patch changes the one-liner description text of dvb-bt8xx to something more meaningful, and adds AVerMedia to the detailed description. Signed-off-by: -
Ralf Baechle authored
Rewrite of the Indycam / VINO video v4l2 drivers for the SGI Indy. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Signed-off-by:
Mikael Nousiainen <tmnousia@cc.hut.fi> Cc: <video4linux-list@redhat.com> Signed-off-by:
-
Miklos Szeredi authored
Fix http://bugzilla.kernel.org/show_bug.cgi?id=4857 When pivot_root is called from an init script in an initramfs environment, it causes a circular reference in the mount tree. The cause of this is that pivot_root() is not prepared to handle pivoting an unattached mount. In an initramfs environment, rootfs is the root of the namespace, and so it is not attached. This patch fixes this and related problems, by returning -EINVAL if either the current root or the new root is detached. Signed-off-by:
Miklos Szeredi <miklos@szeredi.hu> Acked-by:
Al Viro <viro@parcelfarce.linux.theplanet.co.uk> Cc: <bigfish@asmallpond.org> Cc: Christoph Hellwig <hch@lst.de> Signed-off-by:
-
Keshavamurthy Anil S authored
This patch fixes a race condition where in system used to hang or sometime crash within minutes when kprobes are inserted on ISR routine and a task routine. The fix has been stress tested on i386, ia64, pp64 and on x86_64. To reproduce the problem insert kprobes on schedule() and do_IRQ() functions and you should see hang or system crash. Signed-off-by:
Anil S Keshavamurthy <anil.s.keshavamurthy@intel.com> Signed-off-by:
Ananth N Mavinakayanahalli <ananth@in.ibm.com> Acked-by:
Prasanna S Panchamukhi <prasanna@in.ibm.com> Signed-off-by:
-
Jim Keniston authored
This patch fixes a bug in kprobes's handling of a corner case on i386 and x86_64. On an SMP system, if one CPU unregisters a kprobe just after another CPU hits that probepoint, kprobe_handler() on the latter CPU sees that the kprobe has been unregistered, and attempts to let the CPU continue as if the probepoint hadn't been hit. The bug is that on i386 and x86_64, we were neglecting to set the IP back to the beginning of the probed instruction. This could cause an oops or crash. This bug doesn't exist on ppc64 and ia64, where a breakpoint instruction leaves the IP pointing to the beginning of the instruction. I don't know about sparc64. (Dave, could you please advise?) This fix has been tested on i386 and x86_64 SMP systems. To reproduce the problem, set one CPU to work registering and unregistering a kprobe repeatedly, and another CPU pounding the probepoint in a tight loop. Acked-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
-
Keshavamurthy Anil S authored
This patch addresses a potential race condition for a case where Kprobe has been removed right after another CPU has taken a break hit. The way this is addressed here is when the CPU that has taken a break hit does not find its corresponding kprobe, then we check to see if the original instruction got replaced with other than break. If it got replaced with other than break instruction, then we continue to execute from the replaced instruction, else if we find that it is still a break, then we let the kernel handle this, as this might be the break instruction inserted by other than kprobe(may be kernel debugger). Signed-off-by:
-
Prasanna S Panchamukhi authored
This patch adds flags "ax" to .kprobe.text section. Signed-off-by:
-
Prasanna S Panchamukhi authored
This patch contains the sparc64 architecture specific changes to prevent the possible race conditions. Signed-off-by:
-
Prasanna S Panchamukhi authored
This patch contains the ia64 architecture specific changes to prevent the possible race conditions. Signed-off-by:
-
Prasanna S Panchamukhi authored
This patch contains the ppc64 architecture specific changes to prevent the possible race conditions. Signed-off-by:
-
Prasanna S Panchamukhi authored
This patch contains the x86_64 architecture specific changes to prevent the possible race conditions. Signed-off-by:
-
Prasanna S Panchamukhi authored
This patch contains the i386 architecture specific changes to prevent the possible race conditions. Signed-off-by:
-
Prasanna S Panchamukhi authored
There are possible race conditions if probes are placed on routines within the kprobes files and routines used by the kprobes. For example if you put probe on get_kprobe() routines, the system can hang while inserting probes on any routine such as do_fork(). Because while inserting probes on do_fork(), register_kprobes() routine grabs the kprobes spin lock and executes get_kprobe() routine and to handle probe of get_kprobe(), kprobes_handler() gets executed and tries to grab kprobes spin lock, and spins forever. This patch avoids such possible race conditions by preventing probes on routines within the kprobes file and routines used by kprobes. I have modified the patches as per Andi Kleen's suggestion to move kprobes routines and other routines used by kprobes to a seperate section .kprobes.text. Also moved page fault and exception handlers, general protection fault to .kprobes.text section. These patches have been tested on i386, x86_64 and ppc64 architectures, also compiled on ia64 and sparc64 architectures. Signed-off-by:
-
Brice Goglin authored
I noticed a strange return value in smsc_ircc_init in drivers/net/irda/smsc_ircc2.c in rc4-mm1. When reaching the line "if (ircc_fir > 0 && ircc_sir > 0)", ret is 0. So I don't see the point of setting it to 0 in the "else" case. >From what I see in 2.6.12 it should probably be set to -ENODEV at the begining of the "else" case. The attached patch does this. Note that I didn't actually see any breakage caused by this. Signed-off-by:
Brice Goglin <Brice.Goglin@ens-lyon.org> Cc: Dmitry Torokhov <dtor_core@ameritech.net> Signed-off-by:
-
Dmitry Torokhov authored
IRDA: smsc-ircc2 - do not over-use void * pointers, use specific types wherever possible. Signed-off-by:Dmitry Torokhov <dtor@mail.ru> Cc: Jean Tourrilhes <jt@hpl.hp.com> Signed-off-by:
-
Dmitry Torokhov authored
IRDA: smsc-ircc2 - use netdev_priv() instead of accessing pointer directly. Signed-off-by: -
Dmitry Torokhov authored
IRDA: smsc-ircc2 - add sysfs support (platform device and driver) and switch power management to the new scheme. Signed-off-by: -
Dmitry Torokhov authored
IRDA: smsc-ircc2 - cleanup - do not pass around iobase, it can be retrieved from smsc_ircc_cb structure. Signed-off-by: -
Dmitry Torokhov authored
IRDA: smsc-ircc2 - remove excessive typedefs. Signed-off-by:
-
Dmitry Torokhov authored
IRDA: smsc-ircc2 - remove home-grown DIM macro, use ARRAY_SIZE intead. Also fix out-of-bound array access. Signed-off-by: -
Dmitry Torokhov authored
IRDA: smsc-ircc2 - some formatting changes for better readability. Signed-off-by:
-
Dmitry Torokhov authored
IRDA: smsc-ircc2 - whitespace fixes. Signed-off-by:
-
Jan Kara authored
attached patch should fix the following race: Proc 1 Proc 2 __flush_batch() ll_rw_block() do_get_write_access() lock_buffer jh is only waiting for checkpoint -> b_transaction == NULL -> do nothing unlock_buffer test_set_buffer_locked() test_clear_buffer_dirty() __journal_file_buffer() change the data submit_bh() and we have sent wrong data to disk... We now clean the dirty buffer flag under buffer lock in all cases and hence we know that whenever a buffer is starting to be journaled we either finish the pending write-out before attaching a buffer to a transaction or we won't write the buffer until the transaction is going to be committed. The test in jbd_unexpected_dirty_buffer() is redundant - remove it. Furthermore we have to clear the buffer dirty bit under the buffer lock to prevent races with buffer write-out (and hence prevent returning a buffer with IO happening). Signed-off-by:Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
Use block layer predefined function. Signed-off-by:
-
Jan Kara authored
We need to be sure that current data are sent to disk. Hence we call ll_rw_block() with SWRITE. Signed-off-by:
-
Jan Kara authored
We need to be sure that current data in buffer are sent to disk. Hence we need to call ll_rw_block() with SWRITE. Signed-off-by:
-
Jan Kara authored
We must be sure that the current data in buffer are sent to disk. Hence we have to call ll_rw_block() with SWRITE. Signed-off-by:
-
Jan Kara authored
Introduce new ll_rw_block() operation SWRITE meaning that block layer should wait for the buffer lock and write-out afterwards. Hence data in buffers at the time of call are guaranteed to be submitted to the disk. Signed-off-by:
-
Jan Kara authored
Fix race between journal_commit_transaction() and other places as journal_unmap_buffer() that are adding buffers to transaction's t_forget list. We have to protect against such places by holding j_list_lock even when traversing the t_forget list. The fact that other places can only add buffers to the list makes the locking easier. OTOH the lock ranking complicates the stuff... Signed-off-by:
-
Mark Fasheh authored
It seems that kjournald() may be missing a check of the JFS_UNMOUNT flag before calling schedule(). This showed up in testing of OCFS2 recovery where our recovery thread would hang in journal_kill_thread() called from journal_destroy() because kjournald never got a chance to read the flag to shut down before the schedule(). Zach pointed out the missing check which led me to hack up this trivial patch. It's been tested many times now and I have yet to reproduce the hang, which was happening very regularly before. <mild rant> I'm guessing that we could really use some wait_event() calls with helper functions in, well, most of jbd these days which would make a ton of the wait code there vastly cleaner. </mild rant> As for why this doesn't happen in ext3 (or OCFS2 during normal mount/unmount of the local nodes journal), I think it may that the specific timing of events in the ocfs2 recovery thread exposes a race there. Because ocfs2_replay_journal() is only interested in playing back the journal, initialization and shutdown happen very quicky with no other metadata put into that specific journal. Acked-by:
"Stephen C. Tweedie" <sct@redhat.com> Signed-off-by:
-
Richard Purdie authored
Add MMC/SD write protection switch handling for the Corgi platform Signed-off-by:
Richard Purdie <rpurdie@rpsys.net> Signed-off-by:
-
Richard Purdie authored
Add keyboard and touchscreen device definitions for corgi. Signed-off-by:
-
Richard Purdie authored
The corgi keyboard has need of a switch event type with slightly type to the input system as recommended by the input maintainer. Signed-off-by:
-
Richard Purdie authored
This patch moves the platform specific Sharp SL-C7x0 LCD code from the w100fb driver into a more appropriate place and updates the Corgi code to match the new w100fb driver. It also updates the corgi touchscreen code to match the new simplified interface available from w100fb. Signed-off-by:
-
Richard Purdie authored
The code w100fb was based on was horribly Sharp SL-C7x0 specific and there was little else that could be done as I had no access to anything else with a w100 in it. There is no real documentation about this chipset available. Ian Molton has access to other platforms with the w100 (Toshiba e-series) and so between us, we've improved w100fb and made it platform independent. Ian Molton also added support for the very similar w3220 and w3200 chipsets. There are a lot of changes here and it nearly amounts to a rewrite of the driver but it has been extensively tested and is being used in preference to the original driver in the Zaurus community. I'd therefore like to update the mainline code to reflect this. Signed-off-by:
Antonino Daplas <adaplas@pol.net> Signed-off-by:
-
Richard Purdie authored
Corgi Touchscreen bugfix. If the PMU isn't running, the register needs to be set to a sane value rather than reusing some random value. Signed-off-by:
-
