- Feb 20, 2019
-
-
Suthikulpanit, Suravee authored
Current SVM AVIC driver makes two incorrect assumptions: 1. APIC LDR register cannot be zero 2. APIC DFR for all vCPUs must be the same LDR=0 means the local APIC does not support logical destination mode. Therefore, the driver should mark any previously assigned logical APIC ID table entry as invalid, and return success. Also, DFR is specific to a particular local APIC, and can be different among all vCPUs (as observed on Windows 10). These incorrect assumptions cause Windows 10 and FreeBSD VMs to fail to boot with AVIC enabled. So, instead of flush the whole logical APIC ID table, handle DFR and LDR for each vCPU independently. Fixes: 18f40c53 ('svm: Add VMEXIT handlers for AVIC') Cc: Radim Krčmář <rkrcmar@redhat.com> Cc: Paolo Bonzini <pbonzini@redhat.com> Reported-by:
Julian Stecklina <jsteckli@amazon.de> Signed-off-by:
Suravee Suthikulpanit <suravee.suthikulpanit@amd.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Gustavo A. R. Silva authored
One of the more common cases of allocation size calculations is finding the size of a structure that has a zero-sized array at the end, along with memory for some number of elements for that array. For example: struct foo { int stuff; void *entry[]; }; instance = kmalloc(sizeof(struct foo) + sizeof(void *) * count, GFP_KERNEL); Instead of leaving these open-coded and prone to type mistakes, we can now use the new struct_size() helper: instance = kmalloc(struct_size(instance, entry, count), GFP_KERNEL); This code was detected with the help of Coccinelle. Signed-off-by:Gustavo A. R. Silva <gustavo@embeddedor.com> Signed-off-by:
-
Pavel Tatashin authored
VMs may show incorrect uptime and dmesg printk offsets on hypervisors with unstable clock. The problem is produced when VM is rebooted without exiting from qemu. The fix is to calculate clock offset not only for stable clock but for unstable clock as well, and use kvm_sched_clock_read() which substracts the offset for both clocks. This is safe, because pvclock_clocksource_read() does the right thing and makes sure that clock always goes forward, so once offset is calculated with unstable clock, we won't get new reads that are smaller than offset, and thus won't get negative results. Thank you Jon DeVree for helping to reproduce this issue. Fixes: 857baa87 ("sched/clock: Enable sched clock early") Cc: stable@vger.kernel.org Reported-by:
Dominique Martinet <asmadeus@codewreck.org> Signed-off-by:
Pavel Tatashin <pasha.tatashin@soleen.com> Signed-off-by:
-
Sean Christopherson authored
Move the clearing of the common registers (not 64-bit-only) to the start of the flow that clears registers holding guest state. This is purely a cosmetic change so that the label doesn't point at a blank line and a #define. No functional change intended. Signed-off-by:
Sean Christopherson <sean.j.christopherson@intel.com> Signed-off-by:
-
Sean Christopherson authored
...now that the sub-routine follows standard calling conventions. Signed-off-by:
-
Sean Christopherson authored
...to make it callable from C code. Note that because KVM chooses to be ultra paranoid about guest register values, all callee-save registers are still cleared after VM-Exit even though the host's values are now reloaded from the stack. Signed-off-by:
-
Sean Christopherson authored
...to prepare for making the assembly sub-routine callable from C code. Signed-off-by:
-
Sean Christopherson authored
...to prepare for making the sub-routine callable from C code. Signed-off-by:
-
Sean Christopherson authored
...to prepare for making the sub-routine callable from C code. That means returning the result in RAX. Since RAX will be used to return the result, use it as the scratch register as well to make the code readable and to document that the scratch register is more or less arbitrary. Signed-off-by:
-
Sean Christopherson authored
...now that the name is no longer usurped by a defunct helper function. Signed-off-by:
-
Sean Christopherson authored
...now that the code is no longer tagged with STACK_FRAME_NON_STANDARD. Arguably, providing __vmx_vcpu_run() to break up vmx_vcpu_run() is valuable on its own, but the previous split was purposely made as small as possible to limit the effects STACK_FRAME_NON_STANDARD. In other words, the current split is now completely arbitrary and likely not the most logical. This also allows renaming ____vmx_vcpu_run() to __vmx_vcpu_run() in a future patch. Signed-off-by:
-
Sean Christopherson authored
As evidenced by the myriad patches leading up to this moment, using an inline asm blob for vCPU-run is nothing short of horrific. It's also been called "unholy", "an abomination" and likely a whole host of other names that would violate the Code of Conduct if recorded here and now. The code is relocated nearly verbatim, e.g. quotes, newlines, tabs and __stringify need to be dropped, but other than those cosmetic changes the only functional changees are to add the "call" and replace the final "jmp" with a "ret". Note that STACK_FRAME_NON_STANDARD is also dropped from __vmx_vcpu_run(). Suggested-by:
Andi Kleen <ak@linux.intel.com> Suggested-by:
Josh Poimboeuf <jpoimboe@redhat.com> Signed-off-by:
-
Sean Christopherson authored
...in preparation for moving to a proper assembly sub-routnine. vCPU-run isn't a leaf function since it calls vmx_update_host_rsp() and vmx_vmenter(). And since we need to save/restore RBP anyways, unconditionally creating the frame costs a single MOV, i.e. don't bother keying off CONFIG_FRAME_POINTER or using FRAME_BEGIN, etc... Signed-off-by:
-
Sean Christopherson authored
...to prepare for moving the inline asm to a proper asm sub-routine. Eliminating the immediates allows a nearly verbatim move, e.g. quotes, newlines, tabs and __stringify need to be dropped, but other than those cosmetic changes the only function change will be to replace the final "jmp" with a "ret". Signed-off-by:
-
Sean Christopherson authored
Declaring the VCPU_REGS_* as enums allows for more robust C code, but it prevents using the values in assembly files. Expliciting #define the indices in an asm-friendly file to prepare for VMX moving its transition code to a proper assembly file, but keep the enums for general usage. Signed-off-by:
-
- Feb 12, 2019
-
-
Sean Christopherson authored
...now that all other references to struct vcpu_vmx have been removed. Note that 'vmx' still needs to be passed into the asm blob in _ASM_ARG1 as it is consumed by vmx_update_host_rsp(). And similar to that code, use _ASM_ARG2 in the assembly code to prepare for moving to proper asm, while explicitly referencing the exact registers in the clobber list for clarity in the short term and to avoid additional precompiler games. Signed-off-by:
-
Sean Christopherson authored
A failed VM-Enter (obviously) didn't succeed, meaning the CPU never executed an instrunction in guest mode and so can't have changed the general purpose registers. In addition to saving some instructions in the VM-Fail case, this also provides a separate path entirely and thus an opportunity to propagate the fail condition to vmx->fail via register without introducing undue pain. Using a register, as opposed to directly referencing vmx->fail, eliminates the need to pass the offset of 'fail', which will simplify moving the code to proper assembly in future patches. Signed-off-by:
-
Sean Christopherson authored
Switching the ordering allows for an out-of-line path for VM-Fail that elides saving guest state but still shares the register clearing with the VM-Exit path. Signed-off-by:
-
Sean Christopherson authored
...and remove struct vcpu_vmx's temporary __launched variable. Eliminating __launched is a bonus, the real motivation is to get to the point where the only reference to struct vcpu_vmx in the asm code is to vcpu.arch.regs, which will simplify moving the blob to a proper asm file. Note that also means this approach is deliberately different than what is used in nested_vmx_check_vmentry_hw(). Use BL as it is a callee-save register in both 32-bit and 64-bit ABIs, i.e. it can't be modified by vmx_update_host_rsp(), to avoid having to temporarily save/restore the launched flag. Signed-off-by:
Jim Mattson <jmattson@google.com> Signed-off-by:
-
Sean Christopherson authored
Providing a helper function to update HOST_RSP is visibly easier to read, and more importantly (for the future) eliminates two arguments to the VM-Enter assembly blob. Reducing the number of arguments to the asm blob is for all intents and purposes a prerequisite to moving the code to a proper assembly routine. It's not truly mandatory, but it greatly simplifies the future code, and the cost of the extra CALL+RET is negligible in the grand scheme. Note that although _ASM_ARG[1-3] can be used in the inline asm itself, the intput/output constraints need to be manually defined. gcc will actually compile with _ASM_ARG[1-3] specified as constraints, but what it actually ends up doing with the bogus constraint is unknown. Signed-off-by:
-
Sean Christopherson authored
...to eliminate its parameter and struct vcpu_vmx offset definition from the assembly blob. Accessing CR2 from C versus assembly doesn't change the likelihood of taking a page fault (and modifying CR2) while it's loaded with the guest's value, so long as we don't do anything silly between accessing CR2 and VM-Enter/VM-Exit. Signed-off-by:
-
Sean Christopherson authored
Currently, host_rsp is cached on a per-vCPU basis, i.e. it's stored in struct vcpu_vmx. In non-nested usage the caching is for all intents and purposes 100% effective, e.g. only the first VMLAUNCH needs to synchronize VMCS.HOST_RSP since the call stack to vmx_vcpu_run() is identical each and every time. But when running a nested guest, KVM must invalidate the cache when switching the current VMCS as it can't guarantee the new VMCS has the same HOST_RSP as the previous VMCS. In other words, the cache loses almost all of its efficacy when running a nested VM. Move host_rsp to struct vmcs_host_state, which is per-VMCS, so that it is cached on a per-VMCS basis and restores its 100% hit rate when nested VMs are in play. Note that the host_rsp cache for vmcs02 essentially "breaks" when nested early checks are enabled as nested_vmx_check_vmentry_hw() will see a different RSP at the time of its VM-Enter. While it's possible to avoid even that VMCS.HOST_RSP synchronization, e.g. by employing a dedicated VM-Exit stack, there is little motivation for doing so as the overhead of two VMWRITEs (~55 cycles) is dwarfed by the overhead of the extra VMX transition (600+ cycles) and is a proverbial drop in the ocean relative to the total cost of a nested transtion (10s of thousands of cycles). Signed-off-by:
-
Sean Christopherson authored
...and provide an explicit name for the constraint. Naming the input constraint makes the code self-documenting and also avoids the fragility of numerically referring to constraints, e.g. %4 breaks badly whenever the constraints are modified. Explicitly using RDX was inherited from vCPU-run, i.e. completely arbitrary. Even vCPU-run doesn't truly need to explicitly use RDX, but doing so is more robust as vCPU-run needs tight control over its register usage. Note that while the naming "conflict" between host_rsp and HOST_RSP is slightly confusing, the former will be renamed slightly in a future patch, at which point HOST_RSP is absolutely what is desired. Signed-off-by:
-
Sean Christopherson authored
Temporarily propagating vmx->loaded_vmcs->launched to vmx->__launched is not functionally necessary, but rather was done historically to avoid passing both 'vmx' and 'loaded_vmcs' to the vCPU-run asm blob. Nested early checks inherited this behavior by virtue of copy+paste. A future patch will move HOST_RSP caching to be per-VMCS, i.e. store 'host_rsp' in loaded VMCS. Now that the reference to 'vmx->fail' is also gone from nested early checks, referencing 'loaded_vmcs' directly means we can drop the 'vmx' reference when introducing per-VMCS RSP caching. And it means __launched can be dropped from struct vcpu_vmx if/when vCPU-run receives similar treatment. Note the use of a named register constraint for 'loaded_vmcs'. Using RCX to hold 'vmx' was inherited from vCPU-run. In the vCPU-run case, the scratch register needs to be explicitly defined as it is crushed when loading guest state, i.e. deferring to the compiler would corrupt the pointer. Since nested early checks never loads guests state, it's a-ok to let the compiler pick any register. Naming the constraint avoids the fragility of referencing constraints via %1, %2, etc.., which breaks horribly when modifying constraints, and generally makes the asm blob more readable. Signed-off-by:
-
Sean Christopherson authored
...to take advantage of __GCC_ASM_FLAG_OUTPUTS__ when possible. Reviewed-by:
-
Sean Christopherson authored
Unlike the primary vCPU-run flow, the nested early checks code doesn't actually want to propagate VM-Fail back to 'vmx'. Yay copy+paste. In additional to eliminating the need to clear vmx->fail before returning, using a local boolean also drops a reference to 'vmx' in the asm blob. Dropping the reference to 'vmx' will save a register in the long run as future patches will shift all pointer references from 'vmx' to 'vmx->loaded_vmcs'. Fixes: 52017608 ("KVM: nVMX: add option to perform early consistency checks via H/W") Signed-off-by:
-
Sean Christopherson authored
Using %1 to reference RCX, i.e. the 'vmx' pointer', is obtuse and fragile, e.g. it results in cryptic and infurating compile errors if the output constraints are touched by anything more than a gentle breeze. Reviewed-by:
-
Sean Christopherson authored
...as it doesn't technically actually do anything non-standard with the stack even though it modifies RSP in a weird way. E.g. RSP is loaded with VMCS.HOST_RSP if the VM-Enter gets far enough to trigger VM-Exit, but it's simply reloaded with the current value. Reviewed-by:
-
Sean Christopherson authored
RAX is not touched by nested_vmx_check_vmentry_hw(), directly or indirectly (e.g. vmx_vmenter()). Remove it from the clobber list. Fixes: 52017608 ("KVM: nVMX: add option to perform early consistency checks via H/W") Reviewed-by:
-
Sean Christopherson authored
Per commit c2036300 ("KVM: VMX: Let gcc to choose which registers to save (x86_64)"), the only reason RDX is saved/loaded to/from the stack is because it was specified as an input, i.e. couldn't be marked as clobbered (ignoring the fact that "saving" it to a dummy output would indirectly mark it as clobbered). Now that RDX is no longer an input, clobber it. Reviewed-by:
-
Sean Christopherson authored
Load RDX with the VMCS.HOST_RSP field encoding on-demand instead of delegating to the compiler via an input constraint. In addition to saving one whole MOV instruction, this allows RDX to be properly clobbered (in a future patch) instead of being saved/loaded to/from the stack. Despite nested_vmx_check_vmentry_hw() having similar code, leave it alone, for now. In that case, RDX is unconditionally used and isn't clobbered, i.e. sending in HOST_RSP as an input is simpler. Note that because HOST_RSP is an enum and not a define, it must be redefined as an immediate instead of using __stringify(HOST_RSP). The naming "conflict" between host_rsp and HOST_RSP is slightly confusing, but the former will be removed in a future patch, at which point HOST_RSP is absolutely what is desired. Reviewed-by:
-
Sean Christopherson authored
RSI is clobbered by the vCPU-run asm blob, but it's not marked as such, probably because GCC doesn't let you mark inputs as clobbered. "Save" RSI to a dummy output so that GCC recognizes it as being clobbered. Fixes: 773e8a04 ("x86/kvm: use Enlightened VMCS when running on Hyper-V") Reviewed-by:
-
Sean Christopherson authored
In the vCPU-run asm blob, the guest's RCX is temporarily saved onto the stack after VM-Exit as the exit flow must first load a register with a pointer to the vCPU's save area in order to save the guest's registers. RCX is arbitrarily designated as the scratch register. Since the stack usage is to (1)save host, (2)save guest, (3)load host and (4)load guest, the code can't conform to the stack's natural FIFO semantics, i.e. it can't simply do PUSH/POP. Regardless of whether it is done for the host's value or guest's value, at some point the code needs to access the stack using a non-traditional method, e.g. MOV instead of POP. vCPU-run opts to create a placeholder on the stack for guest's RCX (by adjusting RSP) and saves RCX to its place immediately after VM-Exit (via MOV). In other words, the purpose of the first 'PUSH RCX' at the start of the vCPU-run asm blob is to adjust RSP down, i.e. there's no need to actually access memory. Use 'SUB $wordsize, RSP' instead of 'PUSH RCX' to make it more obvious that the intent is simply to create a gap on the stack for the guest's RCX. Reviewed-by:
Konrad Rzeszutek Wilk <konrad.wilk@oracle.com> Signed-off-by:
-
Sean Christopherson authored
...except RSP, which is restored by hardware as part of VM-Exit. Paolo theorized that restoring registers from the stack after a VM-Exit in lieu of zeroing them could lead to speculative execution with the guest's values, e.g. if the stack accesses miss the L1 cache[1]. Zeroing XORs are dirt cheap, so just be ultra-paranoid. Note that the scratch register (currently RCX) used to save/restore the guest state is also zeroed as its host-defined value is loaded via the stack, just with a MOV instead of a POP. [1] https://patchwork.kernel.org/patch/10771539/#22441255 Fixes: 0cb5b306 ("kvm: vmx: Scrub hardware GPRs at VM-exit") Cc: <stable@vger.kernel.org> Cc: Jim Mattson <jmattson@google.com> Signed-off-by:
-
Sean Christopherson authored
Nested early checks does a manual comparison of a VMCS' launched status in its asm blob to execute the correct VM-Enter instruction, i.e. VMLAUNCH vs. VMRESUME. The launched flag is a bool, which is a typedef of _Bool. C99 does not define an exact size for _Bool, stating only that is must be large enough to hold '0' and '1'. Most, if not all, compilers use a single byte for _Bool, including gcc[1]. The use of 'cmpl' instead of 'cmpb' was not deliberate, but rather the result of a copy-paste as the asm blob was directly derived from the asm blob for vCPU-run. This has not caused any known problems, likely due to compilers aligning variables to 4-byte or 8-byte boundaries and KVM zeroing out struct vcpu_vmx during allocation. I.e. vCPU-run accesses "junk" data, it just happens to always be zero and so doesn't affect the result. [1] https://gcc.gnu.org/ml/gcc-patches/2000-10/msg01127.html Fixes: 52017608 ("KVM: nVMX: add option to perform early consistency checks via H/W") Cc: <stable@vger.kernel.org> Reviewed-by:
-
Sean Christopherson authored
The vCPU-run asm blob does a manual comparison of a VMCS' launched status to execute the correct VM-Enter instruction, i.e. VMLAUNCH vs. VMRESUME. The launched flag is a bool, which is a typedef of _Bool. C99 does not define an exact size for _Bool, stating only that is must be large enough to hold '0' and '1'. Most, if not all, compilers use a single byte for _Bool, including gcc[1]. Originally, 'launched' was of type 'int' and so the asm blob used 'cmpl' to check the launch status. When 'launched' was moved to be stored on a per-VMCS basis, struct vcpu_vmx's "temporary" __launched flag was added in order to avoid having to pass the current VMCS into the asm blob. The new '__launched' was defined as a 'bool' and not an 'int', but the 'cmp' instruction was not updated. This has not caused any known problems, likely due to compilers aligning variables to 4-byte or 8-byte boundaries and KVM zeroing out struct vcpu_vmx during allocation. I.e. vCPU-run accesses "junk" data, it just happens to always be zero and so doesn't affect the result. [1] https://gcc.gnu.org/ml/gcc-patches/2000-10/msg01127.html Fixes: d462b819 ("KVM: VMX: Keep list of loaded VMCSs, instead of vcpus") Cc: <stable@vger.kernel.org> Reviewed-by:
-
Paolo Bonzini authored
This adds a test for the previous bug. Signed-off-by:
-
- Feb 10, 2019
-
-
-
git://git.infradead.org/users/vkoul/slave-dmaLinus Torvalds authored
Pull dmaengine fixes from Vinod Koul: - Fix in at_xdmac fr wrongful channel state - Fix for imx driver for wrong callback invocation - Fix to bcm driver for interrupt race & transaction abort. - Fix in dmatest to abort in mapping error * tag 'dmaengine-fix-5.0-rc6' of git://git.infradead.org/users/vkoul/slave-dma: dmaengine: dmatest: Abort test in case of mapping error dmaengine: bcm2835: Fix abort of transactions dmaengine: bcm2835: Fix interrupt race on RT dmaengine: imx-dma: fix wrong callback invoke dmaengine: at_xdmac: Fix wrongfull report of a channel as in use
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Ingo Molnar: "A handful of fixes: - Fix an MCE corner case bug/crash found via MCE injection testing - Fix 5-level paging boot crash - Fix MCE recovery cache invalidation bug - Fix regression on Xen guests caused by a recent PMD level mremap speedup optimization" * 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/mm: Make set_pmd_at() paravirt aware x86/mm/cpa: Fix set_mce_nospec() x86/boot/compressed/64: Do not corrupt EDX on EFER.LME=1 setting x86/MCE: Initialize mce.bank in the case of a fatal error in mce_no_way_out()
-
