- Apr 26, 2014
-
-
Thomas Petazzoni authored
In preparation to the complete removal of non-DT support for edmini_v2, this commit copies the TODO list of things to support from the old-style board file into the Device Tree of edmini_v2. Signed-off-by:
Thomas Petazzoni <thomas.petazzoni@free-electrons.com> Acked-by:
Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com> Link: https://lkml.kernel.org/r/1398202002-28530-33-git-send-email-thomas.petazzoni@free-electrons.com Signed-off-by:
Jason Cooper <jason@lakedaemon.net>
-
Thomas Petazzoni authored
This commit converts the already partially DT-converted edmini_v2 platform to use the Device Tree for NOR flash, using the Device Bus. Signed-off-by:
-
Thomas Petazzoni authored
This commit converts the already partially DT-converted edmini_v2 platform to use the Device Tree for USB. Signed-off-by:
-
Thomas Petazzoni authored
This commit converts the already partially DT-converted edmini_v2 platform to use the Device Tree for I2C bus and devices. Signed-off-by:
-
Thomas Petazzoni authored
This commit converts the already partially DT-converted edmini_v2 platform to use the Device Tree for pinctrl. Signed-off-by:
-
Thomas Petazzoni authored
Several platforms will most likely use similar pinctrl configurations for SATA0 and SATA1, so we declare those common configurations in the Orion5x DT file. Signed-off-by:
-
Thomas Petazzoni authored
This commit adds the necessary SoC-level Device Tree definitions to describe the Device Bus of Orion5x SOCs. The Device Bus is mainly used to connect NOR flashes to the system. Signed-off-by:
-
Thomas Petazzoni authored
This commit fixes the Orion5x SoC definition to: * Not define a clock-frequency, as it should be described on a per-board basis. * Declare the appropriate clock reference, so that the driver can do correct divisors calculations for the I2C bus. Signed-off-by:
-
Thomas Petazzoni authored
This commit declares the pinctrl device in the Orion5x 5182 Device Tree files, and ensures that the Orion pinctrl driver is compiled. Signed-off-by:
-
Thomas Petazzoni authored
This commit switches the Orion5x platforms described through DT to use a DT-defined interrupt controller and timer. This involves: * Describing in the DT the bridge interrupt controller, which is a child interrupt controller to the main one, which is used for timer and watchdog interrupts. * Describing in the DT the timer. * Adding in the DT the interrupt specifications for the watchdog. * Selecting the ORION_IRQCHIP and ORION_TIMER drivers to be compiled. * Change board-dt.c to no longer have an ->init_time() callback, since the default callback will work fine: it calls clocksource_of_init() and of_clk_init(), as needed. * Implement a multi-IRQ handler for non-DT platforms in mach-orion5x/irq.c. Signed-off-by:
-
Thomas Petazzoni authored
Until the previous commit, the Orion5x clocks were not described in the Device Tree. Now that they are described in the Device Tree, we can replace the manual 'clock-frequency' property in the UART nodes by a nicer 'clocks' reference in those UART nodes. This commit consequently removes the 'clock-frequency' property from the LaCie edmini_v2 board, which is at this point the only Orion5x board converted to the Device Tree. Signed-off-by:
-
Thomas Petazzoni authored
This commit moves the Orion5x platforms using the Device Tree to use the recently introduced clock driver for Orion5x. To achieve that, it: * Adds the necessary DT description of the clock. * Selects ORION_CLK to enable the compilation of the clock driver. * Call of_clk_init() instead of the Orion5x-specific clock initialization function. Signed-off-by:
-
Thomas Petazzoni authored
For some reason, the Ethernet interrupt was missing in the Orion5x Device Tree definition. Signed-off-by:
-
Thomas Petazzoni authored
This commit renames the XOR engine Device Tree node to dma-controller@, to conform with the standard node name proposed by the ePAPR. Suggested-by:
-
Thomas Petazzoni authored
This commit converts the existing devices described in the edmini_v2 Device Tree to use node labels: the UART and SATA device. Also, it reorders the eth and mdio node label references to be sorted alphabetically. Signed-off-by:
-
Thomas Petazzoni authored
This commit adds the new linux,stdout-path to the edmini_v2 platform, pointing to the serial device use for the console. Signed-off-by:
-
Thomas Petazzoni authored
As noted by Sebastian Hesselbarth, the Device Tree nodes for GPIO keys and LEDs should be named gpio-keys and gpio-leds. Signed-off-by:
-
Thomas Petazzoni authored
In order to ease identification of devices, it is useful to have Device Tree labels on all devices. This commit adds such labels to the Orion5x SoC Device Tree file. Signed-off-by:
-
Thomas Petazzoni authored
This commit switches the Orion5x Device Tree files to use the DT representation and probing for the mvebu-mbus driver. The changes are mainly: * Re-organize the DT to follow the same organization as the one used on Armada 370/XP, which is needed for mvebu-mbus to work: a top-level soc { ... } node, which corresponds to the MBus bus, and a sub-node internal-regs { ... } for all peripherals whose register sit only in the "Internal Register Window". This change re-indents by one level the definition of all nodes in the Device Tree, which explains the large change. * Use custom functions orion5x_dt_init_early() and orion5x_dt_init_time() instead of orion5x_init_early() and orion5x_timer_init() as we now want the MBus driver to be probed from the Device Tree. We still use the old-style timer initialization, but that will be changed in a followup commit. Signed-off-by: -
Thomas Petazzoni authored
The orion5x-lacie-ethernet-disk-mini-v2.dts can benefit from using gpio.h and input.h dt-bindings headers to replace hardcoded values by more meaningful macros. Signed-off-by:
-
Thomas Petazzoni authored
This commit switches the Orion5x Device Tree files to use C preprocessor based includes, as it will allow us to use definitions from header files in future commits. Signed-off-by:
-
Thomas Petazzoni authored
The interrupt controller node was located outside of the ocp@f1000000 node, which doesn't make much sense: like any other device, the interrupt controller has registers located in the "Internal Registers Window", so it is much more logical to have it under the ocp@f1000000 node. It is even more important as we are going to move Orion5x to use the Device Tree binding of the mvebu-mbus driver. Signed-off-by:
-
- Apr 04, 2014
-
-
Andrzej Hajda authored
The patch changes fimd node status to OK. Signed-off-by:
Andrzej Hajda <a.hajda@samsung.com> Signed-off-by:
Inki Dae <inki.dae@samsung.com>
-
Andrzej Hajda authored
The patch changes fimd node status to OK. Signed-off-by:
-
Andrzej Hajda authored
The patch adds s6e8aa0 panel node for trats2. It adds also trats2 specific properties for DSI and regulator required by panel. Signed-off-by:
-
Andrzej Hajda authored
The patch adds s6e8aa0 panel node for trats. It adds also trats specific properties for DSI. Signed-off-by:
-
Andrzej Hajda authored
This is a common part of DSI node for all Exynos4 boards. Signed-off-by:
-
Andrzej Hajda authored
This patch replaces panel bindings for panel initialized by boot loader with bindings to proper ld9040 panel. Signed-off-by:
-
- Apr 03, 2014
-
-
Maxime Ripard authored
Switch the device tree to the new compatibles introduced in the RTC drivers to have a common pattern accross all Allwinner SoCs. Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Mar 31, 2014
-
-
Hans de Goede authored
The IRQ line used in sun6i-a31.dtsi for the NMI controller is wrong. This causes a IRQ storm since the NMI controller is repeatedly fired. This patch fixes this problem assigning the correct IRQ number to the NMI controller. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
Carlo Caione <carlo@caione.org> Cc: maxime.ripard@free-electrons.com Cc: linux-arm-kernel@lists.infradead.org Cc: linux-sunxi@googlegroups.com Link: http://lkml.kernel.org/r/1395939759-11135-2-git-send-email-carlo@caione.org Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- Mar 29, 2014
-
-
Barry Song authored
move to support of_dma_request_slave_channel() and dma_request_slave_channel. we add a xlate() to let dma clients be able to find right dma_chan by generic "dmas" properties in dts. Cc: Mark Rutland <mark.rutland@arm.com> Cc: Lars-Peter Clausen <lars@metafoo.de> Signed-off-by:
Barry Song <Baohua.Song@csr.com> Acked-by:
Arnd Bergmann <arnd@arndb.de> Signed-off-by:
Vinod Koul <vinod.koul@intel.com>
-
Dinh Nguyen authored
This patch adds the dts bindings documenation for the Altera SOCFPGA glue layer for the Synopsys STMMAC ethernet driver. Signed-off-by:
Dinh Nguyen <dinguyen@altera.com> Signed-off-by:
-
- Mar 27, 2014
-
-
Lee Jones authored
Here we add the necessary device nodes required for successful device probing and Pinctrl setup for the FSM when booting on an STiH415 (Orly1) or STiH416 (Orly2) based b2020 development board. Acked-by:
Srinivas Kandagatla <srinivas.kandagatla@st.com> Acked-by Angus Clark <angus.clark@st.com> Acked-by:
Brian Norris <computersforpeace@gmail.com> Acked-by:
Maxime Coquelin <maxime.coquelin@st.com> Signed-off-by:
Lee Jones <lee.jones@linaro.org> Signed-off-by:
-
Lee Jones authored
Here we add the necessary device nodes required for successful device probing and Pinctrl setup for the FSM when booting on an STiH416 (Orly2). Acked-by:
-
Arnd Bergmann authored
This reverts commit 7e0b4cd0. The binding changes need to be done differently as well, let's take them through netdev, and merge the dts changes in a new patch here. Signed-off-by:
-
- Mar 26, 2014
-
-
Stephen Warren authored
Neither Tegra114 nor Tegra124 allow "low power mode" to be configured on SDIO1 or SDIO3 drive groups. Remove the attempt to configure that option from the Dalmore and Venice2 DTs. The Venice2 DT contained duplicate configurations for most sdmmc1_* pins. Remove the duplicate pins from one of the nodes, and fix the configuration since the remaining clk pin is output-only. Signed-off-by:
Stephen Warren <swarren@nvidia.com> Signed-off-by:
-
Carlo Caione authored
This patch adds DTS entries for NMI controller as child of GIC. Signed-off-by:
-
- Mar 23, 2014
-
-
Andrzej Hajda authored
The patch adds fimd node with display timings for exynos4210-universal device. It also makes LCD regulators always on. This allow to re-use panel initialized by boot loader. Signed-off-by:
Tomasz Figa <t.figa@samsung.com> Signed-off-by:
-
- Mar 20, 2014
-
-
Stephen Warren authored
Remove some entries from Dalmore's device tree that attempt to set some options which aren't supported for the drive_gma pin group. Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Ivan Khoronzhuk authored
As suggested by Olof Johansson at http://www.spinics.net/lists/arm-kernel/msg314009.html . It be better just keeping a "ti,keystone" top-level compatible and just using that to probe. If so we don't have to touch the file for new boards in the future. So use common "ti,keystone" compatible in keystone.c for all boards. Cc: Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Olof Johansson <olof@lixom.net> Signed-off-by:
Ivan Khoronzhuk <ivan.khoronzhuk@ti.com> Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com>
-
