- Mar 05, 2012
-
-
Paul Walmsley authored
ARM: OMAP2+: omap_device: call all suspend, resume callbacks when OMAP_DEVICE_NO_IDLE_ON_SUSPEND is set During system suspend, when OMAP_DEVICE_NO_IDLE_ON_SUSPEND is set on an omap_device, call the corresponding driver's ->suspend() and ->suspend_noirq() callbacks (if present). Similarly, during resume, the driver's ->resume() and ->resume_noirq() callbacks must both be called, if present. (The previous code only called ->suspend_noirq() and ->resume_noirq().) If all of these callbacks aren't called, some important driver suspend/resume code may not get executed. In current mainline, the bug fixed by this patch is only a problem under the following conditions: - the kernel is running on an OMAP4 - an OMAP UART is used as a console - the kernel command line parameter 'no_console_suspend' is specified - and the system enters suspend ("echo mem > /sys/power/state"). Under this combined circumstance, the system cannot be awakened via the serial port after commit be4b0281 ("tty: serial: OMAP: block idle while the UART is transferring data in PIO mode"). This is because the OMAP UART driver's ->suspend() callback is never called. The ->suspend() callback would have called uart_suspend_port() which in turn would call enable_irq_wake(). Since enable_irq_wake() isn't called for the UART's IRQ, check_wakeup_irqs() would mask off the UART IRQ in the GIC. On v3.3 kernels prior to the above commit, serial resume from suspend presumably occurred via the PRCM interrupt. The UART was in smart-idle mode, so it was able to send a PRCM wakeup which in turn would be converted into a PRCM interrupt to the GIC, waking up the kernel. But after the above commit, when the system is suspended in the middle of a UART transmit, the UART IP block would be in no-idle mode. In no-idle mode, the UART won't generate wakeups to the PRCM when incoming characters are received; only GIC interrupts. But since the UART driver's ->suspend() callback is never called, uart_suspend_port() and enable_irq_wake() is never called; so the UART interrupt is masked by check_wakeup_irqs() and the UART can't wake up the MPU. The remaining mechanism that could have awakened the system would have been I/O chain wakeups. These wouldn't be active because the console UART's clocks are never disabled when no_console_suspend is used, preventing the full chip from idling. Also, current mainline doesn't yet support full chip idle states for OMAP4, so I/O chain wakeups are not enabled. This patch is the result of a collaboration. John Stultz <johnstul@us.ibm.com> and Andy Green <andy.green@linaro.org> reported the serial wakeup problem that led to the discovery of this problem. Kevin Hilman <khilman@ti.com> narrowed the problem down to the use of no_console_suspend. Signed-off-by:Paul Walmsley <paul@pwsan.com> Cc: John Stultz <johnstul@us.ibm.com> Cc: Andy Green <andy.green@linaro.org> Reviewed-by:
Kevin Hilman <khilman@ti.com> Signed-off-by:
-
Kevin Hilman authored
Currently all omap_devices are forced to have the dummy device 'omap_device_parent' as a parent. This was used to distinguish omap_devices from "normal" platform_devices in the OMAP PM core code. Now that we implement the PM core using PM domains, this is no longer needed, and is removed. This also frees up omap_devices to have a more complex parent/child relationships that model actual device relationships. The only in-tree user of omap_device_parent was the OMAP PM layer to handle lost-context count for omap_devices. That is now converted to use the presence of the omap_device_pm_domain instead. Signed-off-by: -
Jean Pihet authored
Check the return code pointer value from debugfs_create_dir for error or NULL. Also added an additional check to prevent the creation of a 'suspend' entry at the debugfs root in case a power domain directory cannot be created. Signed-off-by:
Jean Pihet <j-pihet@ti.com> Signed-off-by:
-
Paul Walmsley authored
clkdms_setup() is identical across OMAP2, 3, and 4, so share it. Signed-off-by:
Santosh Shilimkar <santosh.shilimkar@ti.com> Cc: Rajendra Nayak <rnayak@ti.com> Tested-by:
-
Paul Walmsley authored
Clean up a few different parts of omap_set_pwrdm_state(): - Remove a superfluous call to pwrdm_state_switch(). Not needed unless LOWPOWERSTATECHANGE is used, because the state switch code is called by either clkdm_sleep() or clkdm_allow_idle(). - Add code to wait for the power state transition in the OMAP4+ low power state change. This is speculative, so I would particularly appreciate feedback on this part. - Remove a superfluous call to pwrdm_read_pwrst(). - Update variable names to be more meaningful (hopefully) and precise. - Fix an error path bug that would not place the clockdomain back into hardware-supervised idle or sleep mode if the power state could not be programmed. The documentation for this function still needs major improvements; that's left for a later patch. Signed-off-by:
Tero Kristo <t-kristo@ti.com> Acked-by:
-
Paul Walmsley authored
Remove some superfluous calls to pwrdm_clear_all_prev_pwrst(). pwrdm_pre_transition(), which appears a few lines after these calls, invokes pwrdm_clear_all_prev_pwrst() on each powerdomain -- there's no need to do it twice. N.B.: some of us have observed that accesses to the previous powerstate registers seem to be quite slow. Although the writes removed by this patch should be buffered by the write buffer, there is a read to a PRM register immediately afterwards. That will block the OMAP3 MPU until all of those writes complete. So this patch should result in a minor performance improvement during idle entry. Signed-off-by:
-
- Feb 29, 2012
-
-
Tony Lindgren authored
With the introduction of iomap changes platform init code fails for emu.c if CONFIG_OMAP3_EMU is selected: arch/arm/mach-omap2/emu.c:35:8: error: 'L4_EMU_34XX_BASE' undeclared here (not in a function) Signed-off-by:Tony Lindgren <tony@atomide.com>
-
- Feb 24, 2012
-
-
Kevin Hilman authored
Building omap_devices should only be done at init time, and since omap_device_build() is using early_platform calls which are also __init, this ensures that omap_device isn't trying to use functions that disappear. Signed-off-by:
-
Tony Lindgren authored
Now that omap hsmmc init is split into two functions, it's safe to mark omap_hsmmc_init and omap_mux related functions to __init. This basically reverts the following fixes for the case where TWL was compiled as a module: a98f77bb (ARM: omap: fix section mismatch warning for sdp3430_twl_gpio_setup()) 8930b4e3 (ARM: omap: fix section mismatch warnings in mux.c caused by hsmmc.c) Additionally it fixes up the remaining section warnings for all callers of omap_mux functions. Cc: Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
-
Tony Lindgren authored
Drivers should no longer use omap_read/write functions but instead use ioremap + read/write functions. As some USB legacy code is still shared between omap1 and omap2420, let's limit the omap_read/write to plat/usb.h. Note that the long term fix is to update the drivers to use ioremap and read/write functions. That can now be done as a separate patch series that is limited to the USB drivers. Also make sure the legacy omap1-keypad.c driver builds if selected for 2420 based systems. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Signed-off-by: -
Tony Lindgren authored
This is needed to minimize io.h so the SoC specific io.h for ARMs can removed. Note that minimal driver changes for DSS and RNG are needed to include cpu.h for SoC detection macros. Cc: Tomi Valkeinen <tomi.valkeinen@ti.com> Cc: Matt Mackall <mpm@selenic.com> Cc: Herbert Xu <herbert@gondor.apana.org.au> Signed-off-by: -
Tony Lindgren authored
There's no need to have these defines in plat/io.h. Note that we now need to ifdef omap_read/write calls as they will be available for omap1 only. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: -
Tony Lindgren authored
There's no need to have these in plat/io.h. While at it, clean up the includes to group them like they typically are grouped. Signed-off-by: -
Tony Lindgren authored
This way we can remove omap_read/write call from the GPIO driver and remove include to linux/io.h. Cc: Grant Likely <grant.likely@secretlab.ca> Signed-off-by: -
Tony Lindgren authored
We don't want to keep it in io.h as we want to remove io.h for omap2+ for the common zImage support. Signed-off-by: -
Tony Lindgren authored
These should be local to omap2/3/4. Signed-off-by: -
Paul Walmsley authored
Remove omap_{read,write}l() from the 24xx PM code. The clocksource code should now handle what this was supposed to do. Tested on N800 -- but it's hard to say whether this fixes anything. OMAP24xx static suspend path is currently broken, and this patch doesn't change that. Signed-off-by: -
Jarkko Nikula authored
Flag single_channel in struct omap2_mcspi_device_config is not used by drivers/spi/spi-omap2-mcspi.c so we may remove it from include/plat/mcspi.h and affected board files. Signed-off-by:
Jarkko Nikula <jarkko.nikula@bitmer.com> Signed-off-by:
-
- Feb 21, 2012
-
-
Rob Herring authored
Now that most platforms don't need disable_fiq and arch_ret_to_user macros, we can remove the empty macros or empty entry-macro.S files. Signed-off-by:
Rob Herring <rob.herring@calxeda.com> Acked-by:
Jamie Iles <jamie@jamieiles.com> Acked-by:
Nicolas Pitre <nico@linaro.org> Acked-by:
Linus Walleij <linus.walleij@linaro.org> Acked-by:
Ryan Mallon <rmallon@gmail.com> Acked-by:
Nicolas Ferre <nicolas.ferre@atmel.com> Acked-by:
H Hartley Sweeten <hsweeten@visionengravers.com> Acked-by:
Shawn Guo <shawn.guo@linaro.org>
-
Rob Herring authored
With the removal of disable_fiq on rpc and addition MULTI_IRQ_HANDLER, entry-macro.S is no longer needed for platforms that select MULTI_IRQ_HANDLER and the include of it can be conditional. Signed-off-by:
-
Rob Herring authored
Only rpc uses disable_fiq macro. Change it to a run-time installed default FIQ handler. The handler is installed before FIQ is enabled so the behavior should be unchanged. Signed-off-by:
-
Rob Herring authored
Only 3 platforms need arch_ret_to_user macro, so add ARCH_HAS_RET_TO_USER kconfig option and make iop13xx, iop32x and iop33x select it. Signed-off-by:
-
- Feb 20, 2012
-
-
Tony Lindgren authored
Otherwise omap_device_build() and omap_mux related functions can't be marked as __init when twl is build as a module. If a board is using GPIO pins or regulators configured by an external chip, such as TWL PMIC on I2C bus, the board must mark those MMC controllers as deferred. Additionally both omap_hsmmc_init() and omap_hsmmc_late_init() must be called by the board. For MMC controllers using internal GPIO pins for card detect and regulators the slots don't need to be marked deferred. In this case calling omap_hsmmc_init() is sufficient. Only mark the MMC slots using gpio_cd or gpio_wd as deferred as noted by Igor Grinberg <grinberg@compulab.co.il>. Note that this patch does not change the behaviour for board-4430sdp.c board-omap4panda.c. These boards wrongly rely on the omap_hsmmc.c init function callback to configure the PMIC GPIO interrupt lines on external chip. If the PMIC interrupt lines are not configured during init, they will fail. Reported-by:
Russell King <rmk+kernel@arm.linux.org.uk> Signed-off-by:
Rajendra Nayak <rnayak@ti.com> Signed-off-by:
-
Ohad Ben-Cohen authored
Expose omap_device_{alloc, delete, register} so we can use them outside of omap_device.c. This approach allows users, which need to manipulate an archdata member of a device before it is registered, to do so. This is also useful for users who have their devices created very early so they can be used at ->reserve() time to reserve CMA memory. The immediate use case for this is to set the private iommu archdata member, which binds a device to its associated iommu controller. This way, generic code will be able to attach omap devices to their iommus, without calling any omap-specific API. With this in hand, we can further clean the existing mainline OMAP iommu driver and its mainline users, and focus on generic IOMMU approaches for future users (rpmsg/remoteproc and the upcoming generic DMA API). This patch is still considered an interim solution until DT fully materializes for omap; at that point, this functionality will be removed as DT will take care of creating the devices and configuring them correctly. Tested on OMAP4 with a generic rpmsg/remoteproc that doesn't use any omap-specific IOMMU API anymore. Signed-off-by:Ohad Ben-Cohen <ohad@wizery.com> Signed-off-by:
-
Tony Lindgren authored
Otherwise we get the following error: arch/arm/mach-omap2/built-in.o: In function `n8x0_mmc_callback': twl-common.c:(.text+0x108a0): undefined reference to `omap_mmc_notify_cover_event' Fix this by warning about unusable MMC cover events. The long term fix needs to change the MMC drivers to register board specific callbacks directly with PMIC. Reported-by:
-
Tony Lindgren authored
On some omaps twl4030_gpio has a callback to try to initialize the MMC controller. If twl4030_gpio is compiled as a module, bad things can happen because the callback function starts calling functions that are supposed to be marked __init: Kernel panic - not syncing: Attempted to kill the idle task! twl4030_gpio twl4030_gpio: can't dispatch IRQs from modules gpiochip_add: registered GPIOs 192 to 209 on device: twl4030 Unable to handle kernel paging request at virtual address b82a4c74 ... Additionally if this does not fail, warnings are produced about trying to register the MMC multiple times. Fix this by removing __init from omap_mux_get_by_name, and add checks if omap2_hsmmc_init() is getting called more than once. Note that this will get fixed properly later on by splitting omap2_hsmmc_init into two functions. Reported-by:
-
- Feb 13, 2012
-
-
Jean-Christophe PLAGNIOL-VILLARD authored
Driver at91_ide is broken and should not be fixed: remove it. Modification of device files that where making use of it. The PATA driver (pata_at91) is able to replace at91_ide. Signed-off-by:
Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> Acked-by:
-
Jean-Christophe PLAGNIOL-VILLARD authored
SMC, Static Memory Controller will need more accessors to fine configure its parameters. Signed-off-by:
-
Nicolas Ferre authored
Registration of at91_udc as a module will enable SoC related code. Fix following an idea from Karel Znamenacek. Signed-off-by:
Karel Znamenacek <karel@ryston.cz> Acked-by:
-
Russell King authored
It's useful to print the error code when a called function fails so a diagnosis of why it failed is possible. In this case, it fails because we try to register some data for the wl12xx driver, but as the driver is not configured, a stub function is used which simply returns -ENOSYS. Let's do the simple thing for -rc and print the error code. Also, the return code from platform_register_device() at each of these sites was not being checked. Add some checking, and again print the error code. This should be fixed properly for the next merge window so we don't issue error messages merely because a driver is not configured. Acked-by:
-
Russell King authored
While trying to debug my OMAP platforms, they emitted this message: omap_hwmod: %s: enabled state can only be entered from initialized, idle, or disabled state The following backtrace said it was from a function called '_enable', which didn't provide much clue. Grepping didn't find it either. The message is wrapped, so unwrap the message so grep can find it. Do the same for three other messages in this file. Acked-by:
-
Russell King authored
The previous commit causes new section mismatch warnings: WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb30): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio() The function omap_init_hsmmc() references the function __init omap_mux_init_gpio(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_gpio is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb4c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_gpio() The function omap_init_hsmmc() references the function __init omap_mux_init_gpio(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_gpio is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb60): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb6c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb78): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb90): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdb9c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdba8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbc0): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbcc): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbd8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdbf8): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc04): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc10): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc28): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc34): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc40): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc58): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc64): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc70): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. WARNING: arch/arm/mach-omap2/built-in.o(.text+0xdc7c): Section mismatch in reference from the function omap_init_hsmmc() to the function .init.text:omap_mux_init_signal() The function omap_init_hsmmc() references the function __init omap_mux_init_signal(). This is often because omap_init_hsmmc lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. Again, as for omap2_hsmmc_init(), these functions are callable at runtime via the gpio-twl4030.c driver, and so these can't be marked __init. Acked-by:
-
Russell King authored
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xd0f0): Section mismatch in reference from the function sdp3430_twl_gpio_setup() to the function .init.text:omap2_hsmmc_init() The function sdp3430_twl_gpio_setup() references the function __init omap2_hsmmc_init(). This is often because sdp3430_twl_gpio_setup lacks a __init annotation or the annotation of omap2_hsmmc_init is wrong. sdp3430_twl_gpio_setup() is called via platform data from the gpio-twl4030 module, which can be inserted and removed at runtime. This makes sdp3430_twl_gpio_setup() callable at runtime, and prevents it being marked with an __init annotation. As it calls omap2_hsmmc_init() unconditionally, the only resolution to this warning is to remove the __init markings from omap2_hsmmc_init() and its called functions. This addresses the functions in hsmmc.c. Acked-by:
-
Russell King authored
WARNING: arch/arm/mach-omap2/built-in.o(.text+0xb798): Section mismatch in reference from the function omap_4430sdp_display_init() to the function .init.text:omap_display_init() The function omap_4430sdp_display_init() references the function __init omap_display_init(). This is often because omap_4430sdp_display_init lacks a __init annotation or the annotation of omap_display_init is wrong. Fix this by adding __init to omap_4430sdp_display_init(). Acked-by:
-
Russell King authored
WARNING: vmlinux.o(.text+0x1c664): Section mismatch in reference from the function omap_secondary_startup() to the function .cpuinit.text:secondary_startup() The function omap_secondary_startup() references the function __cpuinit secondary_startup(). This is often because omap_secondary_startup lacks a __cpuinit annotation or the annotation of secondary_startup is wrong. Unfortunately, fixing this causes a new warning which is harder to solve: WARNING: arch/arm/mach-omap2/built-in.o(.text+0x5328): Section mismatch in reference from the function omap4_hotplug_cpu() to the function .cpuinit.text:omap_secondary_startup() The function omap4_hotplug_cpu() references the function __cpuinit omap_secondary_startup(). This is often because omap4_hotplug_cpu lacks a __cpuinit annotation or the annotation of omap_secondary_startup is wrong. because omap4_hotplug_cpu() is used by power management code as well, which may not end up using omap_secondary_startup(). Acked-by:
-
Russell King authored
Found by review. omap4_sdp4430_wifi_mux_init() is called by an __init marked function, and only calls omap_mux_init_gpio() and omap_mux_init_signal() which are both also an __init marked functions. The only reason this doesn't issue a warning is because the compiler inlines omap4_sdp4430_wifi_mux_init() into omap4_sdp4430_wifi_init(). So, lets add the __init annotation to ensure this remains safe should the compiler choose not to inline. Acked-by:
-
Russell King authored
WARNING: arch/arm/mach-omap2/built-in.o(.text+0x15a4): Section mismatch in reference from the function omap_mux_init_signals() to the function .init.text:omap_mux_init_signal() The function omap_mux_init_signals() references the function __init omap_mux_init_signal(). This is often because omap_mux_init_signals lacks a __init annotation or the annotation of omap_mux_init_signal is wrong. Acked-by:
-
Russell King authored
On my OMAP4 platform, I'm getting this error message repeated several times at boot: omap_vc_i2c_init: I2C config for all channels must match. omap_vc_i2c_init: I2C config for all channels must match. This doesn't help identify what the problem is. Fix this message to be more informative: omap_vc_i2c_init: I2C config for vdd_iva does not match other channels (0). omap_vc_i2c_init: I2C config for vdd_mpu does not match other channels (0). This allows us to identify which voltage domains have a problem, and what the I2C configuration state (a boolean, i2c_high_speed) setting being used actually is. From this we find that omap4_core_pmic has i2c_high_speed false, but omap4_iva_pmic and omap4_mpu_pmic both have it set true. Acked-by:
-
Russell King authored
While testing on my OMAP3430 platform, this error message was emitted: omap_vc_init_channel: PMIC info requried to configure vc forvdd_core not populated.Hence cannot initialize vc Trying to find this message was difficult because it was wrapped across several lines. It also mis-spells "required", doesn't read very well, and has spaces lacking. Let's replace it with a more concise: omap_vc_init_channel: No PMIC info for vdd_core While we're here, fix a simple spelling error in a comment. Signed-off-by: -
Russell King authored
When CONFIG_OF is disabled, the compile fails with: arch/arm/mach-omap2/prm44xx.c:41: error: 'OMAP44XX_IRQ_PRCM' undeclared here (not in a function) Acked-by:
-
