- Feb 09, 2022
-
-
Dan Williams authored
Per the CXL specification (8.1.12.2 Memory Device PCIe Capabilities and Extended Capabilities) the Device Serial Number capability is mandatory. Emit it for user tooling to identify devices. It is reasonable to ask whether the attribute should be added to the list of PCI sysfs device attributes. The PCI layer can optionally emit it too, but the CXL subsystem is aiming to preserve its independence and the possibility of CXL topologies with non-PCI devices in it. To date that has only proven useful for the 'cxl_test' model, but as can be seen with seen with ACPI0016 devices, sometimes all that is needed is a platform firmware table to point to CXL Component Registers in MMIO space to define a "CXL" device. Reviewed-by:
Jonathan Cameron <Jonathan.Cameron@huawei.com> Link: https://lore.kernel.org/r/164366608838.196598.16856227191534267098.stgit@dwillia2-desk3.amr.corp.intel.com Signed-off-by:
Dan Williams <dan.j.williams@intel.com>
-
Ben Widawsky authored
CXL 2.0 8.1.3.8.2 states: Memory_Active: When set, indicates that the CXL Range 1 memory is fully initialized and available for software use. Must be set within Range 1. Memory_Active_Timeout of deassertion of reset to CXL device if CXL.mem HwInit Mode=1 Unfortunately, Memory_Active can take quite a long time depending on media size (up to 256s per 2.0 spec). Provide a callback for the eventual establishment of CXL.mem operations via the 'cxl_mem' driver the 'struct cxl_memdev'. The implementation waits for 60s by default for now and can be overridden by the mbox_ready_time module parameter. Signed-off-by:
Ben Widawsky <ben.widawsky@intel.com> [djbw: switch to sleeping wait] Reviewed-by:
-
Ben Widawsky authored
Before CXL 2.0 HDM Decoder Capability mechanisms can be utilized in a device the driver must determine that the device is ready for CXL.mem operation and that platform firmware, or some other agent, has established an active decode via the legacy CXL 1.1 decoder mechanism. This legacy mechanism is defined in the CXL DVSEC as a set of range registers and status bits that take time to settle after a reset. Validate the CXL memory decode setup via the DVSEC and cache it for later consideration by the cxl_mem driver (to be added). Failure to validate is not fatal to the cxl_pci driver since that is only providing CXL command support over PCI.mmio, and might be needed to rectify CXL DVSEC validation problems. Any potential ranges that the device is already claiming via DVSEC need to be reconciled with the dynamic provisioning ranges provided by platform firmware (like ACPI CEDT.CFMWS). Leave that reconciliation to the cxl_mem driver. [djbw: shorten defines] [djbw: change precise spin wait to generous msleep] Reported-by:
kernel test robot <lkp@intel.com> Signed-off-by:
-
Ben Widawsky authored
The PCIe device DVSEC, defined in the CXL 2.0 spec, 8.1.3 is required to be implemented by CXL 2.0 endpoint devices. In preparation for consuming this information in a new cxl_mem driver, retrieve the CXL DVSEC position and warn about the implications of not finding it. Allow for mailbox operation even if the CXL DVSEC is missing. Signed-off-by:
-
Ben Widawsky authored
In preparation for defining a cxl_port object to represent the decoder resources of a memory expander capture the component register base address. The port driver uses the component register base to enumerate the HDM Decoder Capability structure. Unlike other cxl_port objects the endpoint port decodes from upstream SPA to downstream DPA rather than upstream port to downstream port. Signed-off-by:
-
Dan Williams authored
Now that dport and decoder enumeration is centralized in the port driver, the @host argument for these helpers can be made implicit. For the root port the host is the port's uport device (ACPI0017 for cxl_acpi), and for all other descendant ports the devm context is the parent of @port. Reviewed-by:
-
Ben Widawsky authored
The need for a CXL port driver and a dedicated cxl_bus_type is driven by a need to simultaneously support 2 independent physical memory decode domains (cache coherent CXL.mem and uncached PCI.mmio) that also intersect at a single PCIe device node. A CXL Port is a device that advertises a CXL Component Register block with an "HDM Decoder Capability Structure". >From Documentation/driver-api/cxl/memory-devices.rst: Similar to how a RAID driver takes disk objects and assembles them into a new logical device, the CXL subsystem is tasked to take PCIe and ACPI objects and assemble them into a CXL.mem decode topology. The need for runtime configuration of the CXL.mem topology is also similar to RAID in that different environments with the same hardware configuration may decide to assemble the topology in contrasting ways. One may choose performance (RAID0) striping memory across multiple Host Bridges and endpoints while another may opt for fault tolerance and disable any striping in the CXL.mem topology. The port driver identifies whether an endpoint Memory Expander is connected to a CXL topology. If an active (bound to the 'cxl_port' driver) CXL Port is not found at every PCIe Switch Upstream port and an active "root" CXL Port then the device is just a plain PCIe endpoint only capable of participating in PCI.mmio and DMA cycles, not CXL.mem coherent interleave sets. The 'cxl_port' driver lets the CXL subsystem leverage driver-core infrastructure for setup and teardown of register resources and communicating device activation status to userspace. The cxl_bus_type can rendezvous the async arrival of platform level CXL resources (via the 'cxl_acpi' driver) with the asynchronous enumeration of Memory Expander endpoints, while also implementing a hierarchical locking model independent of the associated 'struct pci_dev' locking model. The locking for dport and decoder enumeration is now handled in the core rather than callers. For now the port driver only enumerates and registers CXL resources (downstream port metadata and decoder resources) later it will be used to take action on its decoders in response to CXL.mem region provisioning requests. Note1: cxlpci.h has long depended on pci.h, but port.c was the first to not include pci.h. Carry that dependency in cxlpci.h. Note2: cxl port enumeration and probing complicates CXL subsystem init to the point that it helps to have centralized debug logging of probe events in cxl_bus_probe(). Reported-by: -
Dan Williams authored
In order to enable libkmod lookups for CXL device objects to their corresponding module, add 'modalias' to the base attribute of CXL devices. Reviewed-by:
-
Dan Williams authored
Unlike the decoder enumeration for "root decoders" described by platform firmware, standard decoders can be enumerated from the component registers space once the base address has been identified (via PCI, ACPI, or another mechanism). Add common infrastructure for HDM (Host-managed-Device-Memory) Decoder enumeration and share it between host-bridge, upstream switch port, and cxl_test defined decoders. The locking model for switch level decoders is to hold the port lock over the enumeration. This facilitates moving the dport and decoder enumeration to a 'port' driver. For now, the only enumerator of decoder resources is the cxl_acpi root driver. Co-developed-by:
-
Dan Williams authored
The core houses infrastructure for decoder resources. A CXL port's dports are more closely related to decoder infrastructure than topology enumeration. Implement generic PCI based dport enumeration in the core, i.e. arrange for existing root port enumeration from cxl_acpi to share code with switch port enumeration which just amounts to a small difference in a pci_walk_bus() invocation once the appropriate 'struct pci_bus' has been retrieved. Set the convention that decoder objects are registered after all dports are enumerated. This enables userspace to know when the CXL core is finished establishing 'dportX' links underneath the 'portX' object. Reviewed-by:
-
Dan Williams authored
Similar to the mem.h rename, if the core wants to reuse definitions from drivers/cxl/pci.h it is unable to use <pci.h> as that collides with archs that have an arch/$arch/include/asm/pci.h, like MIPS. Reported-by:
-
Dan Williams authored
In preparation for moving dport enumeration into the core, require the port device lock to be acquired by the caller. Reviewed-by:
-
Dan Williams authored
In preparation for switch port enumeration while also preserving the potential for multi-domain / multi-root CXL topologies. Introduce a 'struct device' generic mechanism for retrieving a root CXL port, if one is registered. Note that the only known multi-domain CXL configurations are running the cxl_test unit test on a system that also publishes an ACPI0017 device. With this in hand the nvdimm-bridge lookup can be with device_find_child() instead of bus_find_device() + custom mocked lookup infrastructure in cxl_test. The mechanism looks for a 2nd level port since the root level topology is platform-firmware specific and the 2nd level down follows standard PCIe topology expectations. The cxl_acpi 2nd level is associated with a PCIe Root Port. Reported-by:
-
Dan Williams authored
Add a helper for converting a PCI enumerated cxl_port into the pci_bus that hosts its dports. For switch ports this is trivial, but for root ports there is no generic way to go from a platform defined host bridge device, like ACPI0016 to its corresponding pci_bus. Rather than spill ACPI goop outside of the cxl_acpi driver, just arrange for it to register an xarray translation from the uport device to the corresponding pci_bus. This is in preparation for centralizing dport enumeration in the core. Reviewed-by:
-
Dan Williams authored
Lockdep reports: ====================================================== WARNING: possible circular locking dependency detected 5.16.0-rc1+ #142 Tainted: G OE ------------------------------------------------------ cxl/1220 is trying to acquire lock: ffff979b85475460 (kn->active#144){++++}-{0:0}, at: __kernfs_remove+0x1ab/0x1e0 but task is already holding lock: ffff979b87ab38e8 (&dev->lockdep_mutex#2/4){+.+.}-{3:3}, at: cxl_remove_ep+0x50c/0x5c0 [cxl_core] ...where cxl_remove_ep() is a helper that wants to delete ports while holding a lock on the host device for that port. That sets up a lockdep violation whereby target_list_show() can not rely holding the decoder's device lock while walking the target_list. Switch to a dedicated seqlock for this purpose. Reported-by: -
Dan Williams authored
When CONFIG_PROVE_LOCKING is enabled the 'struct device' definition gets an additional mutex that is not clobbered by lockdep_set_novalidate_class() like the typical device_lock(). This allows for local annotation of subsystem locks with mutex_lock_nested() per the subsystem's object/lock hierarchy. For CXL, this primarily needs the ability to lock ports by depth and child objects of ports by their parent parent-port lock. Reviewed-by:
-
Ben Widawsky authored
In preparation for proving CXL subsystem usage of the device_lock() order track the depth of ports with the expectation that shallower port locks can be held over deeper port locks. Signed-off-by:
-
Ben Widawsky authored
Unused CXL decoders, or ports which use a passthrough decoder (no HDM decoder registers) are expected to be initialized in a specific way. Since upcoming drivers will want the same initialization, and it was already a requirement to have consumers of the API configure the decoder specific to their needs, initialize to this passthrough state by default. Signed-off-by:
-
Dan Williams authored
Fix a '\n' vs '/n' typo. Fixes: 08422378 ("cxl/pci: Add HDM decoder capabilities") Acked-by:
-
Ben Widawsky authored
Add wrappers for the creation of decoder objects at the root level and switch level, and keep the core helper private to cxl/core/port.c. Root decoders are static descriptors conveyed from platform firmware (e.g. ACPI CFMWS). Switch decoders are CXL standard decoders enumerated via the HDM decoder capability structure. The base address for the HDM decoder capability structure may be conveyed either by PCIe or platform firmware (ACPI CEDT.CHBS). Additionally, the kdoc descriptions for these helpers and their dependencies is updated. Signed-off-by:
-
Ben Widawsky authored
CXL decoders manage address ranges in a hierarchical fashion whereby a leaf is a unique subregion of its parent decoder (midlevel or root). It therefore makes sense to use the resource API for handling this. Reviewed-by:
-
Dan Williams authored
Just like /proc/iomem, CXL physical address information is reserved for root only. Reviewed-by:
-
Dan Williams authored
Given it is dominated by port infrastructure, and will only acquire more, rename bus.c to port.c. Reviewed-by:
-
Ben Widawsky authored
Many CXL drivers simply want to register and unregister themselves. module_driver already supported this. A simple wrapper around that reduces a decent amount of boilerplate in upcoming patches. Suggested-by:
-
Ben Widawsky authored
This implements the TODO in cxl_acpi for mapping component registers. cxl_acpi becomes the second consumer of CXL register block enumeration (cxl_pci being the first). Moving the functionality to cxl_core allows both of these drivers to use the functionality. Equally importantly it allows cxl_core to use the functionality in the future. CXL 2.0 root ports are similar to CXL 2.0 Downstream Ports with the main distinction being they're a part of the CXL 2.0 host bridge. While mapping their component registers is not immediately useful for the CXL drivers, the movement of register block enumeration into core is a vital step towards HDM decoder programming. Signed-off-by:
-
Ben Widawsky authored
In preparation for properly supporting memory active timeout, and later on, other attributes obtained from DVSEC fields, add the full list of DVSEC identifiers from the CXL 2.0 specification. Reviewed-by:
-
Ben Widawsky authored
Get a better naming scheme in place for upcoming additions. By dropping redundant usages of CXL and DVSEC where appropriate we can get more concise and also more grepable defines. Reviewed-by:
-
Dan Williams authored
Device status can change without warning at any point in time. This effectively means that no amount of status checking before a command is submitted can guarantee that the device is not in an error condition when the command is later submitted. The clearest signal that a device is not able to process commands is if it fails to process commands. With the above understanding in hand, update cxl_pci_setup_mailbox() to validate the readiness of the mailbox once at the beginning of time, and then use timeouts and busy sequencing errors as the only occasions to report status. Just as before, unless and until the driver gains a reset recovery path, doorbell clearing failures by the device are fatal to mailbox operations. Reviewed-by:
-
Ben Widawsky authored
The original driver implementation used the doorbell timeout for the Mailbox Interface Ready bit to piggy back off of, since the latter does not have a defined timeout. This functionality, introduced in commit 8adaf747 ("cxl/mem: Find device capabilities"), needs improvement as the recent "Add Mailbox Ready Time" ECN timeout indicates that the mailbox ready time can be significantly longer that 2 seconds. While the specification limits the maximum timeout to 256s, the cxl_pci driver gives up on the mailbox after 60s. This value corresponds with important timeout values already present in the kernel. A module parameter is provided as an emergency override and represents the default Linux policy for all devices. Signed-off-by:
-
Ben Widawsky authored
The cxl_mem module was renamed cxl_pci in commit 21e9f767 ("cxl: Rename mem to pci"). In preparation for adding an ancillary driver for cxl_memdev devices (registered on the cxl bus by cxl_pci), go ahead and rename CONFIG_CXL_MEM to CONFIG_CXL_PCI. Free up the CXL_MEM name for that new driver to manage CXL.mem endpoint operations. Suggested-by:
-
- Jan 30, 2022
-
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull irq fixes from Borislav Petkov: - Drop an unused private data field in the AIC driver - Various fixes to the realtek-rtl driver - Make the GICv3 ITS driver compile again in !SMP configurations - Force reset of the GICv3 ITSs at probe time to avoid issues during kexec - Yet another kfree/bitmap_free conversion - Various DT updates (Renesas, SiFive) * tag 'irq_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: dt-bindings: interrupt-controller: sifive,plic: Group interrupt tuples dt-bindings: interrupt-controller: sifive,plic: Fix number of interrupts dt-bindings: irqchip: renesas-irqc: Add R-Car V3U support irqchip/gic-v3-its: Reset each ITS's BASERn register before probe irqchip/gic-v3-its: Fix build for !SMP irqchip/loongson-pch-ms: Use bitmap_free() to free bitmap irqchip/realtek-rtl: Service all pending interrupts irqchip/realtek-rtl: Fix off-by-one in routing irqchip/realtek-rtl: Map control data to virq irqchip/apple-aic: Drop unused ipi_hwirq field
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull perf fixes from Borislav Petkov: - Prevent accesses to the per-CPU cgroup context list from another CPU except the one it belongs to, to avoid list corruption - Make sure parent events are always woken up to avoid indefinite hangs in the traced workload * tag 'perf_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: perf/core: Fix cgroup event list management perf: Always wake the parent event
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull scheduler fix from Borislav Petkov: "Make sure the membarrier-rseq fence commands are part of the reported set when querying membarrier(2) commands through MEMBARRIER_CMD_QUERY" * tag 'sched_urgent_for_v5.17_rc2_p2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: sched/membarrier: Fix membarrier-rseq fence command missing from query bitmask
-
git://git.kernel.org/pub/scm/linux/kernel/git/tip/tipLinus Torvalds authored
Pull x86 fixes from Borislav Petkov: - Add another Intel CPU model to the list of CPUs supporting the processor inventory unique number - Allow writing to MCE thresholding sysfs files again - a previous change had accidentally disabled it and no one noticed. Goes to show how much is this stuff used * tag 'x86_urgent_for_v5.17_rc2' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: x86/cpu: Add Xeon Icelake-D to list of CPUs that support PPIN x86/MCE/AMD: Allow thresholding interface updates after init
-
Linus Torvalds authored
Merge misc fixes from Andrew Morton: "12 patches. Subsystems affected by this patch series: sysctl, binfmt, ia64, mm (memory-failure, folios, kasan, and psi), selftests, and ocfs2" * emailed patches from Andrew Morton <akpm@linux-foundation.org>: ocfs2: fix a deadlock when commit trans jbd2: export jbd2_journal_[grab|put]_journal_head psi: fix "defined but not used" warnings when CONFIG_PROC_FS=n psi: fix "no previous prototype" warnings when CONFIG_CGROUPS=n mm, kasan: use compare-exchange operation to set KASAN page tag kasan: test: fix compatibility with FORTIFY_SOURCE tools/testing/scatterlist: add missing defines mm: page->mapping folio->mapping should have the same offset memory-failure: fetch compound_head after pgmap_pfn_valid() ia64: make IA64_MCA_RECOVERY bool instead of tristate binfmt_misc: fix crash when load/unload module include/linux/sysctl.h: fix register_sysctl_mount_point() return type
-
Joseph Qi authored
commit 6f1b2285 introduces a regression which can deadlock as follows: Task1: Task2: jbd2_journal_commit_transaction ocfs2_test_bg_bit_allocatable spin_lock(&jh->b_state_lock) jbd_lock_bh_journal_head __jbd2_journal_remove_checkpoint spin_lock(&jh->b_state_lock) jbd2_journal_put_journal_head jbd_lock_bh_journal_head Task1 and Task2 lock bh->b_state and jh->b_state_lock in different order, which finally result in a deadlock. So use jbd2_journal_[grab|put]_journal_head instead in ocfs2_test_bg_bit_allocatable() to fix it. Link: https://lkml.kernel.org/r/20220121071205.100648-3-joseph.qi@linux.alibaba.com Fixes: 6f1b2285 ("ocfs2: fix race between searching chunks and release journal_head from buffer_head") Signed-off-by:
Joseph Qi <joseph.qi@linux.alibaba.com> Reported-by:
Gautham Ananthakrishna <gautham.ananthakrishna@oracle.com> Tested-by:
Saeed Mirzamohammadi <saeed.mirzamohammadi@oracle.com> Cc: "Theodore Ts'o" <tytso@mit.edu> Cc: Andreas Dilger <adilger.kernel@dilger.ca> Cc: Changwei Ge <gechangwei@live.cn> Cc: Gang He <ghe@suse.com> Cc: Joel Becker <jlbec@evilplan.org> Cc: Jun Piao <piaojun@huawei.com> Cc: Junxiao Bi <junxiao.bi@oracle.com> Cc: Mark Fasheh <mark@fasheh.com> Cc: <stable@vger.kernel.org> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Joseph Qi authored
Patch series "ocfs2: fix a deadlock case". This fixes a deadlock case in ocfs2. We firstly export jbd2 symbols jbd2_journal_[grab|put]_journal_head as preparation and later use them in ocfs2 insread of jbd_[lock|unlock]_bh_journal_head to fix the deadlock. This patch (of 2): This exports symbols jbd2_journal_[grab|put]_journal_head, which will be used outside modules, e.g. ocfs2. Link: https://lkml.kernel.org/r/20220121071205.100648-2-joseph.qi@linux.alibaba.com Signed-off-by:
-
Suren Baghdasaryan authored
When CONFIG_PROC_FS is disabled psi code generates the following warnings: kernel/sched/psi.c:1364:30: warning: 'psi_cpu_proc_ops' defined but not used [-Wunused-const-variable=] 1364 | static const struct proc_ops psi_cpu_proc_ops = { | ^~~~~~~~~~~~~~~~ kernel/sched/psi.c:1355:30: warning: 'psi_memory_proc_ops' defined but not used [-Wunused-const-variable=] 1355 | static const struct proc_ops psi_memory_proc_ops = { | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1346:30: warning: 'psi_io_proc_ops' defined but not used [-Wunused-const-variable=] 1346 | static const struct proc_ops psi_io_proc_ops = { | ^~~~~~~~~~~~~~~ Make definitions of these structures and related functions conditional on CONFIG_PROC_FS config. Link: https://lkml.kernel.org/r/20220119223940.787748-3-surenb@google.com Fixes: 0e94682b ("psi: introduce psi monitor") Signed-off-by:Suren Baghdasaryan <surenb@google.com> Reported-by:
Johannes Weiner <hannes@cmpxchg.org> Signed-off-by:
-
Suren Baghdasaryan authored
When CONFIG_CGROUPS is disabled psi code generates the following warnings: kernel/sched/psi.c:1112:21: warning: no previous prototype for 'psi_trigger_create' [-Wmissing-prototypes] 1112 | struct psi_trigger *psi_trigger_create(struct psi_group *group, | ^~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1182:6: warning: no previous prototype for 'psi_trigger_destroy' [-Wmissing-prototypes] 1182 | void psi_trigger_destroy(struct psi_trigger *t) | ^~~~~~~~~~~~~~~~~~~ kernel/sched/psi.c:1249:10: warning: no previous prototype for 'psi_trigger_poll' [-Wmissing-prototypes] 1249 | __poll_t psi_trigger_poll(void **trigger_ptr, | ^~~~~~~~~~~~~~~~ Change the declarations of these functions in the header to provide the prototypes even when they are unused. Link: https://lkml.kernel.org/r/20220119223940.787748-2-surenb@google.com Fixes: 0e94682b ("psi: introduce psi monitor") Signed-off-by:
-
