- Aug 31, 2007
-
-
Ralf Baechle authored
The IOC3 is a multifunction device but not in sense of the PCI specification. Currently its ethernet and serial functionality are supported by two separate drivers authored and maintained by different people, so MAINTAINERS should reflect that. Cc: Patrick Gefre <pfg@sgi.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
Rafael J. Wysocki authored
Dependencies of CONFIG_SUSPEND and CONFIG_HIBERNATION introduced by commit 296699de "Introduce CONFIG_SUSPEND for suspend-to-Ram and standby" are incorrect, as they don't cover the facts that (1) not all architectures support suspend and (2) SMP hibernation is only possible on X86 and PPC64 (if CONFIG_PPC64_SWSUSP is set). Signed-off-by:
Rafael J. Wysocki <rjw@sisk.pl> Signed-off-by:
-
Oleg Nesterov authored
Spotted by Marcin Kowalczyk <qrczak@knm.org.pl>. sys_setpgid(child) fails if the child was forked by sub-thread. Fix the "is it our child" check. The previous commit ee0acf90 was not complete. (this patch asks for the new same_thread_group() helper, but mainline doesn't have it yet). Signed-off-by:
Oleg Nesterov <oleg@tv-sign.ru> Acked-by:
Roland McGrath <roland@redhat.com> Cc: <stable@kernel.org> Tested-by:
"Marcin 'Qrczak' Kowalczyk" <qrczak@knm.org.pl> Signed-off-by:
-
Christoph Lameter authored
Do not BUG() if we cannot register a slab with sysfs. Just print an error. The only consequence of not registering is that the slab cache is not visible via /sys/slab. A BUG() may not be visible that early during boot and we have had multiple issues here already. Signed-off-by:
Christoph Lameter <clameter@sgi.com> Acked-by:
David S. Miller <davem@davemloft.net> Signed-off-by:
-
Atsushi Nemoto authored
Correct the name of the spi_txx9 driver (and their in-tree user) instead of MODULE_ALIAS workaround. This would be preferable in the long term. Signed-off-by:
Atsushi Nemoto <anemo@mba.ocn.ne.jp> Acked-by:
David Brownell <dbrownell@users.sourceforge.net> Signed-off-by:
-
David Brownell authored
Update various SPI drivers so they properly support - coldplug through "modprobe $(cat /sys/devices/.../modalias)" - hotplug through "modprobe $(MODALIAS)" The basic rule for platform, SPI, and (new style) I2C drivers is just to make sure that modprobing the driver name works. In this case, all the relevant drivers are platform drivers, and this patch either (a) Changes the driver name, if no in-tree code would break; this is simpler and thus preferable in the long term. (b) Adds MODULE_ALIAS directives, when in-tree platforms declare devices using the current driver name; less desirable. Most systems will link SPI controller drivers statically, but there's no point in being needlessly broken. Signed-off-by:
Andrei Konovalov <akonovalov@ru.mvista.com> Signed-off-by:
-
Jonathan Lim authored
taskstats.ac_exitcode is assigned to task_struct.exit_code in bacct_add_tsk() through the following kernel function calls: do_exit() taskstats_exit() fill_pid() bacct_add_tsk() The problem is that in do_exit(), task_struct.exit_code is set to 'code' only after taskstats_exit() has been called. So we need to move the assignment before taskstats_exit(). Signed-off-by:Jonathan Lim <jlim@sgi.com> Cc: Balbir Singh <balbir@in.ibm.com> Signed-off-by:
-
Ralf Baechle authored
We better select a font when the newport driver is a module or the user experience might suffer. Signed-off-by:
Ralf Baechle <ralf@linux-mips.org> Cc: "Antonino A. Daplas" <adaplas@pol.net> Signed-off-by:
-
Jan Kara authored
Fix possible NULL pointer dereference when freeing blocks in case table of free space is used. Also fix handling of the case when we need to move extent from one block to another one to make space for indirect extent. BTW: Nobody seem to have ever used this code. Signed-off-by:
Jan Kara <jack@suse.cz> Signed-off-by:
-
Jan Kara authored
If UDF superblock is incorrect, we can fail to find a table of free / allocated space and consequently Oops. Handle this situation more gracefully by ignoring the broken UDF partition. Signed-off-by:
-
KAMEZAWA Hiroyuki authored
In migration fallback path, write_page() or lock_page() will be called. This causes sleep with holding rcu_read_lock(). For avoding that, just do rcu_lock if the page is Anon.(this is enough.) Signed-off-by:
KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com> Acked-by:
-
Jeff Dike authored
Stop UML crashing when trying to dump a process core on x86_64. This is the minimal fix to stop the crash - more things are broken here, and patches are forthcoming. The immediate thing to do is define ELF_CORE_COPY_REGS and ELF_CORE_COPY_FPREGS. Defining ELF_CORE_COPY_FPREGS allows dump_fpu to go away. It is defined in terms of save_fp_registers, so that needs to be added. Signed-off-by:
Jeff Dike <jdike@linux.intel.com> Signed-off-by:
-
Jeff Dike authored
Fix a class of bugs in the UML linker scripts which caused section boundary variables to sometimes not line up with their sections. Signed-off-by:
-
Andrew Morton authored
Don't try to free memory which we didn't allocate. Acked-by:
-
Andrew Morton authored
This patch got appied twice. Cc: Ryusuke Konishi <konishi.ryusuke@lab.ntt.co.jp> Cc: Michael Halcrow <mhalcrow@us.ibm.com> Signed-off-by:
-
Christoph Lameter authored
Some compilers (especially older gcc releases) may skip inlining sometimes which will lead to link failures. Force the inlining of keyfunctions in slub_def.h to avoid these issues. Signed-off-by:
Jan Dittmer <jdi@l4x.org> Signed-off-by:
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: Fix several bugs in MSI handling. [SPARC64]: Fix type and constant sizes wrt. sun4u IMAP/ICLR handling.
-
Linus Torvalds authored
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [PKTGEN]: Remove write-only variable. [NETFILTER]: xt_tcpudp: fix wrong struct in udp_checkentry [NET_SCHED] sch_prio.c: remove duplicate call of tc_classify() [BRIDGE]: Fix OOPS when bridging device without ethtool. [BRIDGE]: Packets leaking out of disabled/blocked ports. [TCP]: Allow minimum RTO to be configurable via routing metrics. SCTP: Fix to handle invalid parameter length correctly SCTP: Abort on COOKIE-ECHO if backlog is exceeded. SCTP: Correctly disable listening when backlog is 0. SCTP: Do not retransmit chunks that are newer then rtt. SCTP: Uncomfirmed transports can't become Inactive SCTP: Pick the correct port when binding to 0. SCTP: Use net_ratelimit to suppress error messages print too fast SCTP: Fix to encode PROTOCOL VIOLATION error cause correctly SCTP: Fix sctp_addto_chunk() to add pad with correct length SCTP: Assign stream sequence numbers to the entire message SCTP: properly clean up fragment and ordering queues during FWD-TSN. [PKTGEN]: Fix multiqueue oops. [BNX2]: Add write posting comment. [BNX2]: Use msleep().
-
David S. Miller authored
1) sun4{u,v}_build_msi() have improper return value handling. We should always return negative error codes, instead of using the magic value "0" which could in fact be a valid MSI number. 2) sun4{u,v}_build_msi() should return -ENOMEM instead of calling prom_prom() halt with kzalloc() of the interrupt data fails. 3) We 'remembered' the MSI number using a singleton in the struct device archdata area, this doesn't work for MSI-X which can cause multiple MSIs assosciated with one device. Delete that archdata member, and instead store the MSI number in the IRQ chip data area. Signed-off-by: -
David S. Miller authored
Sometimes we were using 32-bit values and the top bits were getting inadvertantly chopped off. This will matter for the forthcoming Fire controller MSI support. Signed-off-by: -
Pavel Emelyanov authored
The pktgen_thread.pid is set to current->pid and is never used after this. So remove this at all. Found during isolating the explicit pid/tgid usage. Signed-off-by:
Pavel Emelyanov <xemul@openvz.org> Acked-by:
Sukadev Bhattiprolu <sukadev@us.ibm.com> Signed-off-by:
-
Jesper Bengtsson authored
It doesn't seem to have any effect on the x86 architecture but it does have effect on the Axis CRIS architecture. Signed-off-by:
Jesper Bengtsson <jesper.bengtsson@axis.com> Signed-off-by:
Patrick McHardy <kaber@trash.net> Signed-off-by:
-
Lucas Nussbaum authored
When CONFIG_NET_CLS_ACT is enabled, tc_classify() is called twice in prio_classify(). This causes "interesting" behaviour: with the setup below, packets are duplicated, sent twice to ifb0, and then loop in and out of ifb0. The patch uses the previously calculated return value in the switch, which is probably what Patrick had in mind in commit bdba91ec -- maybe Patrick can double-check this? -- example setup -- ifconfig ifb0 up tc qdisc add dev ifb0 root netem delay 2s tc qdisc add dev $ETH root handle 1: prio tc filter add dev $ETH parent 1: protocol ip prio 10 u32 \ match ip dst 172.24.110.6/32 flowid 1:1 \ action mirred egress redirect dev ifb0 ping -c1 172.24.110.6 Signed-off-by:
Lucas Nussbaum <lucas.nussbaum@imag.fr> Signed-off-by:
-
Alexey Starikovskiy authored
acpi_get_devices() returns success if it did not find any device. We have to check for this case. Signed-off-by:
Alexey Starikovskiy <astarikovskiy@suse.de> Tested-by:
Daniel Ritz <daniel.ritz-ml@swissonline.ch> Tested-by:
Luca <kronos.it@gmail.com> Signed-off-by:
-
Stephen Hemminger authored
Bridge code calls ethtool to get speed. The conversion to using only ethtool_ops broke the case of devices without ethtool_ops. This is a new regression in 2.6.23. Rearranged the switch to a logical order, and use gcc initializer. Ps: speed should have been part of the network device structure from the start rather than burying it in ethtool. Signed-off-by:Stephen Hemminger <shemminger@linux-foundation.org> Acked-by:
Matthew Wilcox <matthew@wil.cx> Signed-off-by:
-
Stephen Hemminger authored
This patch fixes some packet leakage in bridge. The bridging code was allowing forward table entries to be generated even if a device was being blocked. The fix is to not add forwarding database entries unless the port is active. The bug arose as part of the conversion to processing STP frames through normal receive path (in 2.6.17). Signed-off-by:
John W. Linville <linville@tuxdriver.com> Signed-off-by:
-
David S. Miller authored
-
David S. Miller authored
Cell phone networks do link layer retransmissions and other things that cause unnecessary timeout retransmits. So allow the minimum RTO to be inflated per-route to deal with this. Signed-off-by: -
git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6Linus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jmorris/selinux-2.6: SELinux: clear parent death signal on SID transitions
-
git://git.kernel.org/pub/scm/linux/kernel/git/dtor/inputLinus Torvalds authored
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input: Input: psmouse - make dummy touchkit_ps2_detect() static Input: gscps2 - convert to use kzalloc Input: iforce - fix 'unused variable' warning Input: i8042 - fix retrun value of i8042_aux_test_irq Input: gpio_keys - remove duplicate includes
-
Linus Torvalds authored
* master.kernel.org:/home/rmk/linux-2.6-arm: [ARM] 4561/1: i.MX/MX1 GPIO parenthes omission and input setup fix [ARM] 4557/1: Fix PXA irq gpio initialization [ARM] 4551/1: s3c24xx: fix wrong virtual address offsets [ARM] 4552/1: i.MX/MX1 GPIO output setup fix [ARM] 4553/1: ARM at91: define FIQ_START [ARM] 4554/1: replace consistent_sync() with flush_ioremap_region() ARM: OMAP: Enable serial idling and wakeup features ARM: OMAP2: Force APLLs always active ARM: OMAP: H3 workqueue fixes ARM: OMAP: OSK led fixes ARM: OMAP: fix OMAP1 dmtimer build warning ARM: OMAP: Fix 32k timer unsupported one-shot mode
-
Hugh Dickins authored
Alexey Dobriyan reports that maxcpus=1 is still broken in 2.6.23-rc4: if CONFIG_HOTPLUG_CPU is not set, x86_64 bootup oopses in show_stat() - for_each_possible_cpu accesses a per-cpu area which was never set up. Alexey identified commit 61ec7567 (ACPI: boot correctly with "nosmp" or "maxcpus=0") as the origin; but it's not really to blame, just exposes a bug in 2.6.23-rc1's commit 8b3b2955 (Especially when !CONFIG_HOTPLUG_CPU, avoid needlessy allocating resources for CPUs that can never become available). rc1's test for max_cpus < 2 in start_kernel() wasn't working because max_cpus was still NR_CPUS at that point: until rc4 moved the maxcpus parsing earlier. Now it sets cpu_possible_map to 1 before allocating all possible per-cpu areas; then smp_init() expands cpu_possible_map to cpu_present_map (0xf in my case) later on. rc1's commit has good intentions, but expects cpu_present_map to be limited by maxcpus, which is only the case on i386. cpus_and(possible, possible,present) might be good, but needs an audit of cpu_present_map uses - there may well be assumptions that any cpu present is possible. So stay safe for now and just revert those #ifndef CONFIG_HOTPLUG_CPU optimizations in rc1's commit. Signed-off-by:
Hugh Dickins <hugh@veritas.com> Cc: Alexey Dobriyan <adobriyan@sw.ru> Cc: Len Brown <lenb@kernel.org> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Jan Beulich <jbeulich@novell.com> Signed-off-by:
-
Stephen Smalley authored
Clear parent death signal on SID transitions to prevent unauthorized signaling between SIDs. Signed-off-by:
Stephen Smalley <sds@tycho.nsa.gov> Acked-by:
Eric Paris <eparis@parisplace.org> Signed-off-by:
James Morris <jmorris@localhost.localdomain>
-
- Aug 30, 2007
-
-
Wei Yongjun authored
If an INIT with invalid parameter length look like this: Parameter Type : 1 Parameter Length: 800 and not contain any payload, SCTP will ignore this parameter and send back a INIT-ACK. This patch is fix to handle this invalid parameter length correctly. Signed-off-by:
Wei Yongjun <yjwei@cn.fujitsu.com> Signed-off-by:
Vlad Yasevich <vladislav.yasevich@hp.com>
-
Vlad Yasevich authored
Currently we abort on the INIT chunk we our backlog is currenlty exceeded. Delay this about untill COOKIE-ECHO to give the user time to accept the socket. Also, make sure that we treat sk_max_backlog of 0 as no connections allowed. Signed-off-by: -
Vlad Yasevich authored
Signed-off-by: -
Vlad Yasevich authored
When performing a retransmit, do not include the chunk if it was sent less then 1 rtt ago. The reason is that we may receive the SACK very soon and wouldn't retransmit. Suggested by Randy Stewart. Signed-off-by: -
Vlad Yasevich authored
Do not set Unconfirmed transports to Inactive state. This may result in an inactive association being destroyed since we start counting errors on "inactive" transports against the association. This was found at the SCTP interop event. Signed-off-by: -
Vlad Yasevich authored
sctp_bindx() allows the use of unspecified port. The problem is that every address we bind to ends up selecting a new port if the user specified port 0. This patch allows re-use of the already selected port when the port from bindx was 0. Signed-off-by: -
Wei Yongjun authored
When multi bundling SHUTDOWN-ACK message is received in ESTAB state, this will cause "sctp protocol violation state" message print many times. If SHUTDOWN-ACK is bundled 300 times in one packet, message will be print 300 times. The same problem also exists when received unexpected HEARTBEAT-ACK message which is bundled message times. This patch used net_ratelimit() to suppress error messages print too fast. Signed-off-by:
-
