Merge "Allwinner defconfig additions for 3.15" from Maxime Ripard:

Enables SPI and SID drivers in sunxi defconfig

* tag 'sunxi-defconfig-for-3.15' of https://github.com/mripard/linux

:
  ARM: sunxi: Enable A31 SPI and SID in the defconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

A couple of lines in multi_v5_defconfig appear twice,
causing a harmless Kconfig warning. This removes one
of the two copies.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge "mvebu defconfig changes for v3.15 (incremental pull #2)" from Jason Cooper

 - add multi_v5_defconfig
 - add mvebu_v5_defconfig
 - kirkwood: add HP T5325 devices

* tag 'mvebu-defconfig-3.15-2' of git://git.infradead.org/linux-mvebu

:
  ARM: kirkwood: Add HP T5325 devices to {multi|mvebu}_v5_defconfig
  ARM: config: Add mvebu_v5_defconfig
  ARM: config: Add a multi_v5_defconfig

Signed-off-by: Arnd Bergmann <arnd@arndb.de>

Merge tag 'renesas-defconfig3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Third Round of Renesas ARM Based SoC Defconfig Updates for v3.15" from
Simon Horman:

* r7s72100 (RZ/A1H) based Genmai board
  - update defconfig for I2C usage

* r8a7791 (R-Car M2) based Koelsch board
  - Enable SDHI, GPIO and regulators in defconfig

* r8a7790 (R-Car H2) based Lager board
  - Enable RSPI and MTD_M25P80

* emev2 (Emma Mobile) based KZM9D board
  - Remove legacy KZM9D defconfig

* Multiplatform
  - Add defconfig for shmobile multiplatform

* tag 'renesas-defconfig3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: shmobile: r7s72100: update defconfig for I2C usage
  ARM: shmobile: koelsch: Enable SDHI, GPIO and regulators in defconfig
  ARM: shmobile: Get rid of legacy KZM9D defconfig
  ARM: shmobile: Add defconfig for shmobile multiplatform
  ARM: shmobile: lager defconfig: Enable RSPI and MTD_M25P80

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-boards3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Third Round of Renesas ARM Based SoC Boards Updates for v3.15" from
Simon Horman:

* r7s72100 SoC (RZ/A1H) based Genmai board
  - Set proper DMA masks for Ether device

* r8a7791 (R-Car M2) based Koelsch board
  - Remove Koelsch DT reference legacy clock bits
  - Set proper DMA masks for Ether device
  - Add DU device to koelsch-reference
  - Refactor clock lookup hack in koelsch-reference
  - Add SDHI devices

* r8a7790 (R-Car H2) based Lager board
  - Remove Lager DT reference legacy clock bits
  - Set proper DMA masks for Ether device
  - Add internal USB PCI support
  - Add QSPI pinmux
  - Sdd SDHI0/2 support

* emev2 (Emma Mobile EV2) based kzm9d board
  - Remove KZM9D board code

* r8a7778 (R-Car M1) based bock-w board
  - Set proper DMA masks for Ether device

* r8a7740 (R-Mobile A1) based Armadillo 800 EVA board
  - Set proper DMA masks for Ether device

* tag 'renesas-boards3-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: shmobile: Remove Lager DT reference legacy clock bits
  ARM: shmobile: Remove Koelsch DT reference legacy clock bits
  ARM: shmobile: Remove KZM9D board code
  ARM: shmobile: Genmai: set proper DMA masks for Ether device
  ARM: shmobile: Koelsch: set proper DMA masks for Ether device
  ARM: shmobile: Lager: set proper DMA masks for Ether device
  ARM: shmobile: BOCK-W: set proper DMA masks for Ether device
  ARM: shmobile: Armadillo 800 EVA: set proper DMA masks for Ether device
  ARM: shmobile: koelsch-reference: Add DU device
  ARM: shmobile: koelsch-reference: Refactor clock lookup hack
  ARM: shmobile: lager-reference: Add DU device
  ARM: shmobile: lager-reference: Refactor clock lookup hack
  ARM: shmobile: lager: Add internal USB PCI support
  ARM: shmobile: lager legacy: Add QSPI pinmux
  ARM: shmobile: lager: add SDHI0/2 support
  ARM: shmobile: Add SDHI devices for legacy Koelsch

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone into next/boards

Keystone SOC updates for 3.15

- Enable Watchdog and GPIO config
- Enable LED driver config
- Enable NAND and EMIF driver config

* tag 'keystone-soc' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
  ARM: config: keystone: enable AEMIF/NAND support
  ARM: config: keystone: enable led support
  ARM: config: keystone: enable gpio support
  ARM: config: keystone: enable watchdog support

* tag 'pxa' of https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux

:
  ARM: pxa: add gpio keys information

Signed-off-by: Olof Johansson <olof@lixom.net>

Switching from corgikbd to matrixkbd corgi has lost support for few switches.
Readd them through gpio-keys-polled device (-polled, since scoop does
not provide IRQ for GPIO).

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@gmail.com>

Keystone SoC uses the same NAND driver as Davinci, so enable
Davinci NAND and AEIMF that provides interface for it.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Enable support for the MSM8x60, MSM8960, and MSM8974 SoCs, clocks and
serial console as part of the standard multi_v7_defconfig.

Signed-off-by: Kumar Gala <galak@codeaurora.org>
[khilman: removed non-qcom changes]
Signed-off-by: Kevin Hilman <khilman@linaro.org>

The HP T5325 has a PCI based VGA controller. Add the frame buffer
driver, and frame buffer support to the defconfig's. Additionally
add the soc audio framework and the necessary codec.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that there is both v5 and v7 systems in mach-mvebu, the
mvebu_defconfig is not sufficient, since these systems cannot be
combined. Add a v5 defconfig which is based on kirkwood_defconfig,
but purely DT.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Acked-by: Arnd Bergmann <arnd@arndb.de>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

To allow regression build testing of multi v5 systems, add a
multi_v5_defconfig, similar to the multi_v7_defconfig. This is based
on kirkwood_defconfig, but with a few other boards added which claim
to be MULTI_v5.

Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Tested-by: Jason Gunthorpe <jgunthorpe@obsidianresearch.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Merge "mvebu defconfig changes for v3.15" from Jason Cooper:

 - dove
    - remove UBI support
    - enable watchdog

 - mvebu
    - rename mvebu_defconfig mvebu_v7_defconfig
    - enable audio
    - enable watchdog
    - add Armada 375 and 38x

* tag 'mvebu-defconfig-3.15' of git://git.infradead.org/linux-mvebu

:
  ARM: mvebu: update defconfigs for Armada 375 and 38x
  ARM: dove: Enable watchdog support in the defconfig
  ARM: mvebu: Enable watchdog support in defconfig
  ARM: mvebu: enable audio options in mvebu_defconfig
  ARM: mvebu: rename mvebu_defconfig to mvebu_v7_defconfig
  ARM: dove: Remove UBI support from defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-defconfig2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Second Round of Renesas ARM Based SoC Defconfig Updates for v3.15" from
Simon Horman:

* r7s72100 SoC (RZ/A1H) based Genmai board
  - Enable RSPI

* r8a7790 (R-Car H2) based Koelsch board
  - Enable I2C, RSPI and MTD_M25P80

* r8a7779 (R-Car H1) based Lager board
  - Enable sound

* tag 'renesas-defconfig2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: shmobile: genmai defconfig: Enable RSPI
  ARM: shmobile: koelsch defconfig: Enable RSPI and MTD_M25P80
  ARM: shmobile: lager: add sound support on defconfig
  ARM: shmobile: koelsch: Enable I2C in defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-boards2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Second Round of Renesas ARM Based SoC Board Updates for v3.15" from
Simon Horman:

* r7s72100 (RZ/A1H) based Genmai board
  - Enable SH ethernet
  - Add RSPI support

* r8a7791 (R-Car M2) based Koelsch board
  - Add QSPI support
  - Add I2C support
  - Pass SH ethernet PHY IRQ

* r8a7790 (R-Car H2) based Lager board
  - Switch QSPI to named IRQs
  - Add sound support
  - Add USB0 cable detection workaround
  - Pass SH ethernet PHY IRQ

* r8a7779 (R-Car H1) based Marzen board
  - Revert conditional selection of SMSC_PHY

* r8a7778 (R-Car M1) based Bock-W board
  - Use wp-gpios instead of WP pin

* tag 'renesas-boards2-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
  ARM: shmobile: genmai: Enable r7s72100-ether
  ARM: shmobile: lager legacy: Switch QSPI to named IRQs
  ARM: shmobile: koelsch legacy: Add QSPI support
  ARM: shmobile: genmai legacy: Add RSPI support
  Revert "ARM: shmobile: marzen: Conditionally select SMSC_PHY"
  ARM: shmobile: lager: add sound support
  ARM: shmobile: Lager USB0 cable detection workaround
  ARM: shmobile: bockw: use wp-gpios instead of WP pin
  ARM: shmobile: koelsch: Add I2C support
  ARM: shmobile: Koelsch: pass Ether PHY IRQ
  ARM: shmobile: Lager: pass Ether PHY IRQ

Merge tag 'renesas-defconfig-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Renesas ARM based SoC Defconfig Updates for v3.15" from Simon Horman:

* Renesas ARM based SoC boards (Global)
  enable CONFIG_DEVTMPFS in defconfig

* r8a7791 SoC (R-Car M2) based Koelsch board
  - Enable SATA

* r8a7790 SoC (R-Car H2) based Lager board
  - Enable SATA, VIN and ADV7180 decoder in defconfig

* tag 'renesas-defconfig-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

:
  ARM: shmobile: ape6evm: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: armadillo: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: bockw: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: genmai: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: kzm9d: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: kzm9g: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: lager: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: mackerel: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: marzen: enable CONFIG_DEVTMPFS in defconfig
  ARM: shmobile: lager: Enable SATA in defconfig
  ARM: shmobile: koelsch: Enable DEVTMPFS_MOUNT in defconfig
  ARM: shmobile: koelsch: Enable SATA in defconfig
  ARM: shmobile: lager: Enable VIN along with ADV7180 decoder in defconfig

Signed-off-by: Olof Johansson <olof@lixom.net>

Merge tag 'renesas-boards-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas into next/boards

Merge "Renesas ARM based SoC Board Updates for v3.15" from Simon Horman:

* r8a7791 (R-Car M2) based Koelsch board
  - Fix error return code check from clk_get()
  - Add SATA0 support
  - Conditionally select MICREL_PHY for Multiplatform

* r8a7790 (R-Car H2) based Lager board
  - Add USBHS support
  - Fix error return code check from clk_get()
  - Add SATA support
  - Make spi_flash_data const
  - Add VIN1 SoC camera support
  - Conditionally select CONFIG_MICREL_PHY

* r8a7778 (R-Car M1) based Bock-W board
  - Add USB Func DMAEngine support
  - Use HPBIF DMAEngine for sound
  - Use SSI DMAEngine for sound

* emev2 (Emma Mobile EV2) based kzm9d board
  - Use common clock framework

* r8a773a0 (SH-Mobile AG5) based kzm9g board
  - Add zboot support

* Many boards
  - Conditionally select SMSC_PHY

* tag 'renesas-boards-for-v3.15' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas

: (21 commits)
  ARM: shmobile: Remove Lager USBHS UDC ifdefs
  ARM: shmobile: lager: Add USBHS support
  ARM: shmobile: koelsch: fix error return code check from clk_get()
  ARM: shmobile: lager: fix error return code check from clk_get()
  ARM: shmobile: marzen: Conditionally select SMSC_PHY
  ARM: shmobile: mackerel: Conditionally select SMSC_PHY
  ARM: shmobile: kzm9d: Conditionally select SMSC_PHY
  ARM: shmobile: bockw: Sort Kconfig node's selections
  ARM: shmobile: armadillo800eva: Conditionally select SMSC_PHY
  ARM: shmobile: ape6evm: Conditionally select SMSC_PHY
  ARM: shmobile: koelsch: Add SATA0 support
  ARM: shmobile: lager: Add SATA support
  ARM: shmobile: lager: Make spi_flash_data const
  ARM: shmobile: kzm9d: Use common clock framework
  ARM: shmobile: lager: Add VIN1 SoC camera support
  ARM: mach-shmobile: kzm9g: add zboot support
  ARM: shmobile: koelsch: Conditionally select MICREL_PHY for Multiplatform
  ARM: shmobile: bockw: add USB Func DMAEngine support
  ARM: shmobile: bockw: use HPBIF DMAEngine for sound
  ARM: shmobile: bockw: use SSI DMAEngine for sound
  ...

Signed-off-by: Olof Johansson <olof@lixom.net>

Select the correct I2C driver and activate EEPROM support to have a
slave device for testing. Also activate i2c-dev, so i2c-tools will work.

Signed-off-by: Wolfram Sang <wsa@sang-engineering.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Lager DT reference is these days built for multiplatform
only which means that CCF comes with the package. Remove
unused legacy code ifdefs to clean up the code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Koelsch DT reference is these days built for multiplatform
only which means that CCF comes with the package. Remove
unused legacy code ifdefs to clean up the code.

Signed-off-by: Magnus Damm <damm@opensource.se>
Acked-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Get rid of KZM9D board code written in C. This version of the
C board code was used in the case of multiplatform, but these
days DT can be used instead, so because of that simply get rid
of the C code to simplify and save space.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This commit enables the Armada 375 and Armada 38x support in
mvebu_defconfig and multi_v7_defconfig.

Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that we have watchdog support, let's add it to the defconfig.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

Now that we have proper support for Armada 370/XP watchdog
let's enable it in mvebu_defconfig and multi_v7_defconfig.

Signed-off-by: Ezequiel Garcia <ezequiel.garcia@free-electrons.com>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>

The Keystone GPIO functionality is ready for use, so LED support can be
enabled in config.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Enable enable GPIO support for Keystone by setting CONFIG_GPIOLIB and
CONFIG_GPIO_DAVINCI options in keystone_defconfig.

Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Keystone SoC uses the same watchdog driver as Davinci, so
enable WDT and core used by it.

Signed-off-by: Ivan Khoronzhuk <ivan.khoronzhuk@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>

Enable the following:
* regulators (needed for SDHI)
* SDHI
* GPIO
* GPIO keys
* GPIO LEDs

Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Get rid of the kzm9d_defconfig. The KZM9D is now supported
as DT only in case of EMEV2 is selected in the kernel
configuration.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.

Currently, the code works without DMA masks but as we would have to enable
CONFIG_HIGHMEM to access the full board memory in the future, when support for
NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks
should start to matter...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.

Currently, the code works without DMA masks but as we would have to enable
CONFIG_HIGHMEM to access the full board memory in the future, when support for
NETIF_F_SG would be added to the 'sh_eth' driver as well, the correct DMA masks
should start to matter...

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Ether MAC is a DMA-capable device and so should have 'dev.dma_mask' and
'dev.coherent_dma_mask' fields set properly, to reflect 32-bit DMA addressing
ability.

Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The DU device has no DT bindings yet, instantiate it as a platform
device for now.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: omitted DTS portion]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Make the clock lookup hack more generic to ease the addition of more
devices.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

The DU device has no DT bindings yet, instantiate it as a platform
device for now.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
[horms+renesas@verge.net.au: omitted DTS portion]
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

Make the clock lookup hack more generic to ease the addition of more
devices.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Acked-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>

This adds internal PCI USB host devices to R-Car H2 Lager board.

Signed-off-by: Valentine Barshak <valentine.barshak@cogentembedded.com>
[damm@opensource.se: Rebased and reworked to only include USB1 and USB2]
Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>