- Sep 11, 2016
-
-
Mylène Josserand authored
The GR8 is an SoC made by Nextthing loosely based on the sun5i family. Since it's not clear yet what we can factor out and merge with the A10s and A13 support, let's keep it out of the sun5i.dtsi include tree. We will figure out what can be shared when things settle down. Signed-off-by:
Mylène Josserand <mylene.josserand@free-electrons.com> Signed-off-by:
Maxime Ripard <maxime.ripard@free-electrons.com> Acked-by:
Chen-Yu Tsai <wens@csie.org>
-
- Sep 10, 2016
-
-
Chen-Yu Tsai authored
The usbphy and usb_otg nodes in the A23 and A33 dts files only differ by compatible, and for the usbphy, the size of one of its register regions. Move all the common bits to the A23/A33 common dtsi file. Signed-off-by:
-
Maxime Ripard authored
The LCD output needs to be muxed. Add the proper pinctrl node. Signed-off-by:
-
Maxime Ripard authored
Add all the needed blocks to the A33 DTSI. Signed-off-by:
-
Maxime Ripard authored
Now that we have support for the CCU driver in sunxi-ng, convert the A23 and A33 DTs to that driver. Signed-off-by:
-
Chen-Yu Tsai authored
Now that we have a different clock representation, switch to it. Signed-off-by:
-
- Sep 06, 2016
-
-
James Pettigrew authored
The NanoPi NEO is a minimal H3 based SBC. It comes with 256/512M RAM, a micro SD slot, 10/100Mbit ethernet and a single USB-A port. Signed-off-by:
James Pettigrew <james@innovum.com.au> Reviewed-by:
Rask Ingemann Lambertsen <ccc94453@vip.cybercity.dk> Signed-off-by:
-
- Sep 05, 2016
-
-
Hans de Goede authored
Most of the sun8i q8 boards have an SDIO wifi controller, on the variants which use an USB wifi controller, this will result in a couple of error msg-s in dmesg when proving the sdio bus and an used mmc controller. The best way to deal with wifi on this boards really is to simply let the kernel auto-detect usb or sdio wifi controllers, so we will just have to live with the few errors in dmesg. This has been tested on a23 based q8 tablets with ESP8089, RTL8703AS and RTL8189FTV wifi controllers. Signed-off-by:
Hans de Goede <hdegoede@redhat.com> Signed-off-by:
-
Hans de Goede authored
The Orange Pi Plus2E is an extended version of the Orange Pi Pc Plus, with 2G RAM and an external gbit ethernet phy. Note currently the dts is pretty much empty (except for including the pc-plus dts), I've a local patch which enables the emac actually making this dts different from the pc-plus one, but that needs the h3 emac driver to get merged first. Signed-off-by:
-
Hans de Goede authored
Update the sun8i-h3-orangepi-plus.dts model string to reflect that it is valid for both the Orange Pi Plus and the Orange Pi Plus 2. This is also meant to help users realize that it is not valid for the new Orange Pi Plus 2E, which will get its own dts. Signed-off-by:
-
- Aug 31, 2016
-
-
Milo Kim authored
Acked-by:
Milo Kim <woogyom.kim@gmail.com> Signed-off-by:
-
- Aug 27, 2016
-
-
Icenowy Zheng authored
The inet-d978_rev2 is a pcb used in generic A33 based tablets. It features volume buttons, micro-usb otg, headphone connector and a power button. On the board a Realtek RTL8723BS SDIO Wi-Fi module are soldered, and there is also a accompanied board which has a Goodix GT9271 soldered. As this board is desired to create tablets with a Home key dealed by GT9271, a LED is present at the front panel at the position of the Home key. Signed-off-by:
Icenowy Zheng <icenowy@aosc.xyz> Signed-off-by:
-
Chen-Yu Tsai authored
The R_PIO device node is missing #interrupt-cells, which causes interrupt parsing to fail to match it as a valid interrupt controller. Add #interrupt-cells to it. Also remove the unnecesary #address-cells and #size-cells. Fixes: 1ac56a6d ("ARM: dts: sun9i: Add A80 R_PIO pin controller device node") Signed-off-by:
-
- Aug 26, 2016
-
-
Hans de Goede authored
Rename the reference-design-tablet touchscreen node from gsl1680 to touchscreen, all? tablets seem to use the same power and interrupt gpio-s, but not all tablets use a gsl1680 controller making the gsl1680 name somewhat misleading. Also move the reg and compatible property to the actual tablet dts as they may differ per tablet. Signed-off-by:
-
Hans de Goede authored
Add a dts file for the Empire Electronix M712 tablet, this is a 7" A13 tablet, with micro-usb (otg), headphone and micro-sd slots on the outside. It uses a Goodix gt811 touchscreen controller, a RTL8188CTV wifi chip and a DMART06 (1238a4) accelerometer. Note currently the dts for this is somewhat empty. This will change once we add support for the touchscreen and accelerometer. Signed-off-by:
-
Hans de Goede authored
This results in a nice cleanup :) Signed-off-by:
-
Hans de Goede authored
The ehci1/ohci1 pair on the ba10-tv-box is connected to an USB-2 wifi module soldered on the PCB, so there enabling ohci1 is not necessary. Signed-off-by:
-
Hans de Goede authored
The polaroid-mid2809 tablet has an esp8089 wifi chip, add a dt node describing it. Signed-off-by:
-
Hans de Goede authored
The polaroid-mid2407 tablet has an esp8089 wifi chip, add a dt node describing it. Signed-off-by:
-
- Aug 25, 2016
-
-
Icenowy Zheng authored
A23/A33 has a NAND controller which can now be used properly. Add a device node for it. The DMA function cannot work because of changed DMA IP block, so it's temporarily removed in the device node. However, with PIO mode it can still work. Tested on an Aoson M751s tablet with Boris Brezillon's "mtd: nand: allow vendor specific detection/initialization" patchset, which is needed for the large-block MLC chip to be recognized correctly. ( http://lists.infradead.org/pipermail/linux-mtd/2016-June/068198.html ) Signed-off-by:
-
- Aug 22, 2016
-
-
Hans de Goede authored
Add a dts file for tablets using the generic inet-q972 PCB. Tablets with this PCB feature a mini-hdmi output, micro-usb usb-host, micro-usb usb-otg, 3.5mm headphone jack, a micro sd slot, (mini) power-barrel and an usb wifi module. This has been tested on a 9.7" 1024x768 qware qw tb9718-qhd tablet. Signed-off-by:
-
Hans de Goede authored
Just like with a13/a23/a33 most a31 tablets are derived from the same reference design. Add a .dtsi file with all the common bits to avoid endless copy and pasting of these. The sun6i-reference-design-tablet.dtsi this commit adds is a copy of sun6i-a31s-colorfly-e708-q1.dts with a few tablet specific bits removed / left in sun6i-a31s-colorfly-e708-q1.dts. Signed-off-by:
-
Hans de Goede authored
The presence of the mma8452_int_e708_q1 node is a copy and paste error, remove it. Signed-off-by:
-
Chen-Yu Tsai authored
The 32.768 kHz clock inside the A80 SoC is fed from an external source, typically the AC100 RTC module. Make the osc32k placeholder a fixed-factor clock so board dts files can specify its source. Signed-off-by:
-
Chen-Yu Tsai authored
Signed-off-by:
-
Chen-Yu Tsai authored
Signed-off-by:
-
Hans de Goede authored
Almost all sun8i tablets use a gsl1680 touchscreen controller, so add a node describing it to reference-design-tablet.dtsi. Almost all, but not all, so mark it as disabled by default (dts files will also need to supply a firmware-name and resolution info). Signed-off-by:
-
Hans de Goede authored
The ga10h tablet has a rtl8703as wifi chip, add a dt node describing it. This enables usage of wifi on this tablet (together with the out of tree rtl8732bs driver). Signed-off-by:
-
Hans de Goede authored
This results in quite a nice cleanup for this dts file. As an added bonus this also enables full otg support. I've tested that this works as advertised. Signed-off-by:
-
Hans de Goede authored
The Orange Pi Lite SBC is a small H3 based SBC, with 512MB RAM, micro-sd slot, HDMI out, 2 USB-A connectors, 1 micro-USB connector, sdio attached rtl8189ftv wifi and an ir receiver. Signed-off-by:
-
Stefan Mavrodiev authored
A33-OLinuXino is A33 development board designed by Olimex LTD. It has AXP223 PMU, 1GB DRAM, a micro SD card, one USB-OTG connector, headphone and mic jacks, connector for LiPo battery and optional 4GB NAND Flash. It has two 40-pin headers. One for LCD panel, and one for additional modules. Also there is CSI/DSI connector. Signed-off-by:
Stefan Mavrodiev <stefan.mavrodiev@gmail.com> Signed-off-by:
-
Maxime Ripard authored
The CHIP has a status LED connected to one of the AXP GPIOs. Add the gpio-leds node to be able to use the proper LED framework to control it. Signed-off-by: -
Maxime Ripard authored
Add the AXP209 GPIO node to our AXP209 DTSI so that boards can use it. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org>
-
- Aug 08, 2016
-
-
Hans de Goede authored
This will allow u-boot to fill in a mac-address for Orange Pi 2 variants which use an sdio wifi without an eeprom for the mac. Signed-off-by:
-
Hans de Goede authored
There is a new Orange Pi PC *Plus* version available now, this is an extended version of the regular Orange Pi PC with sdio wifi and an eMMC. Signed-off-by:
-
Hans de Goede authored
Now that we've all the necessary bits in place we can enable full otg support on these tablets. Signed-off-by:
-
- Aug 02, 2016
-
-
Vitaly Andrianov authored
This commit adds definition for cpu_on, cpu_off and cpu_suspend commands. These definitions must match the corresponding PSCI definitions in boot monitor. Having those command and corresponding PSCI support in boot monitor allows run time CPU hot plugin. Link: http://lkml.kernel.org/r/E1b8koV-0004Hf-2j@rmk-PC.armlinux.org.uk Signed-off-by:
Keerthy <j-keerthy@ti.com> Signed-off-by:
Vitaly Andrianov <vitalya@ti.com> Signed-off-by:
Russell King <rmk+kernel@arm.linux.org.uk> Cc: Pratyush Anand <panand@redhat.com> Cc: Eric Biederman <ebiederm@xmission.com> Cc: Dave Young <dyoung@redhat.com> Cc: Baoquan He <bhe@redhat.com> Cc: Vivek Goyal <vgoyal@redhat.com> Cc: Simon Horman <horms@verge.net.au> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Jul 22, 2016
-
-
Stefan Agner authored
Replace the non-standard vendor prefix stm with st for STMicroelectronics. The drivers do not specify the vendor prefixes since the I2C Core strips them away from the DT provided compatible string. Therefore, changing existing device trees does not have any impact on device detection. Signed-off-by:
Stefan Agner <stefan@agner.ch> Signed-off-by:
Rob Herring <robh@kernel.org>
-
- Jul 18, 2016
-
-
Hans de Goede authored
The inet86dz board is a board used in 7" tablets from various oems. These tablets are a23 based 7" tablets featuring a 1024x600 LCD, 512MB RAM, 4G NAND, rtl8188etv usb wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by:
-
Hans de Goede authored
The Polaroid MID2407PXE03 is an a23 based 7" tablet based on a M86_MB V2.0 PCB, featuring a 800x480 LCD, 512MB RAM, 4G NAND, esp8089 wifi, gsl1680 touchschreen, micro-sd slot, 3.5mm headphone jack and a micro-usb otg connector which doubles as charging port. Signed-off-by:
-
