- Nov 05, 2018
-
-
Sergei Shtylyov authored
The "official" Condor boards have always been wired to mount NFS via GEther, not EtherAVB -- the boards resoldered for EtherAVB were local to Cogent Embedded, so we've been having an unpleasant situation where a "normal" Condor board still can't mount NFS (unless an EtherAVB PHY extension board is plugged in). Switch from EtherAVB to GEther at last! Fixes: 8091788f ("arm64: dts: renesas: condor: add EtherAVB support") Signed-off-by:
Sergei Shtylyov <sergei.shtylyov@cogentembedded.com> Signed-off-by:
Simon Horman <horms+renesas@verge.net.au>
-
Kuninori Morimoto authored
hscif2 has 4 dmas, but has only 2 dma-names. This patch add missing dma-names. Signed-off-by:
Kuninori Morimoto <kuninori.morimoto.gx@renesas.com> Reviewed-by:
Geert Uytterhoeven <geert+renesas@glider.be> Fixes: e0f0bda7 ("arm64: dts: renesas: r8a7795: sort subnodes of the soc node") Signed-off-by:
-
- Nov 03, 2018
-
-
Alexandre Torgue authored
Remove unused parameter from HASH1 dmas property on stm32mp157c SoC. Fixes: 1e726a40 ("ARM: dts: stm32: Add HASH support on stm32mp157c") Signed-off-by:
Alexandre Torgue <alexandre.torgue@st.com> [Olof: Bug doesn't cause any harm, so shouldn't need stable backport] Signed-off-by:
Olof Johansson <olof@lixom.net>
-
Arnd Bergmann authored
Testing randconfig builds found an instance of a VLA that was missed when determining that we have removed them all: arch/arm/plat-orion/mpp.c: In function 'orion_mpp_conf': arch/arm/plat-orion/mpp.c:31:2: error: ISO C90 forbids variable length array 'mpp_ctrl' [-Werror=vla] This one is fairly straightforward: we know what all three callers are, and the maximum length is not very long. Fixes: 68664695ae57 ("Makefile: Globally enable VLA warning") Signed-off-by:Arnd Bergmann <arnd@arndb.de> Reviewed-by:
Andrew Lunn <andrew@lunn.ch> Reviewed-by:
Kees Cook <keescook@chromium.org> Signed-off-by:
-
- Nov 02, 2018
-
-
Linus Walleij authored
Using CONFIG_PREEMPT as preemption model for ARMv7 systems appear to be the most reasonable default. Signed-off-by:
Linus Walleij <linus.walleij@linaro.org> Signed-off-by:
-
John Garry authored
The arm64 port now runs on servers which use IPMI. This patch enables relevant core configs to save manually enabling them when testing mainline. Signed-off-by:
John Garry <john.garry@huawei.com> [olof: Switched to =m instead of =y] Signed-off-by:
-
Christoph Hellwig authored
__swiotlb_get_sgtable_page and __swiotlb_mmap_pfn are not only misnamed but also only used if CONFIG_IOMMU_DMA is set. Just add a simple ifdef for now, given that we plan to remove them entirely for the next merge window. Reported-by:
Florian Fainelli <f.fainelli@gmail.com> Signed-off-by:
Christoph Hellwig <hch@lst.de> Tested-by:
Will Deacon <will.deacon@arm.com> Acked-by:
Catalin Marinas <catalin.marinas@arm.com>
-
Anders Roxell authored
Commit 1404d6f1 ("arm64: dump: Add checking for writable and exectuable pages") has successfully identified code that leaves a page with W+X permissions. [ 3.245140] arm64/mm: Found insecure W+X mapping at address (____ptrval____)/0xffff000000d90000 [ 3.245771] WARNING: CPU: 0 PID: 1 at ../arch/arm64/mm/dump.c:232 note_page+0x410/0x420 [ 3.246141] Modules linked in: [ 3.246653] CPU: 0 PID: 1 Comm: swapper/0 Not tainted 4.19.0-rc5-next-20180928-00001-ge70ae259b853-dirty #62 [ 3.247008] Hardware name: linux,dummy-virt (DT) [ 3.247347] pstate: 80000005 (Nzcv daif -PAN -UAO) [ 3.247623] pc : note_page+0x410/0x420 [ 3.247898] lr : note_page+0x410/0x420 [ 3.248071] sp : ffff00000804bcd0 [ 3.248254] x29: ffff00000804bcd0 x28: ffff000009274000 [ 3.248578] x27: ffff00000921a000 x26: ffff80007dfff000 [ 3.248845] x25: ffff0000093f5000 x24: ffff000009526f6a [ 3.249109] x23: 0000000000000004 x22: ffff000000d91000 [ 3.249396] x21: ffff000000d90000 x20: 0000000000000000 [ 3.249661] x19: ffff00000804bde8 x18: 0000000000000400 [ 3.249924] x17: 0000000000000000 x16: 0000000000000000 [ 3.250271] x15: ffffffffffffffff x14: 295f5f5f5f6c6176 [ 3.250594] x13: 7274705f5f5f5f28 x12: 2073736572646461 [ 3.250941] x11: 20746120676e6970 x10: 70616d20582b5720 [ 3.251252] x9 : 6572756365736e69 x8 : 3039643030303030 [ 3.251519] x7 : 306666666678302f x6 : ffff0000095467b2 [ 3.251802] x5 : 0000000000000000 x4 : 0000000000000000 [ 3.252060] x3 : 0000000000000000 x2 : ffffffffffffffff [ 3.252323] x1 : 4d151327adc50b00 x0 : 0000000000000000 [ 3.252664] Call trace: [ 3.252953] note_page+0x410/0x420 [ 3.253186] walk_pgd+0x12c/0x238 [ 3.253417] ptdump_check_wx+0x68/0xf8 [ 3.253637] mark_rodata_ro+0x68/0x98 [ 3.253847] kernel_init+0x38/0x160 [ 3.254103] ret_from_fork+0x10/0x18 kprobes allocates a writable executable page with module_alloc() in order to store executable code. Reworked to that when allocate a page it sets mode RO. Inspired by commit 63fef14f ("kprobes/x86: Make insn buffer always ROX and use text_poke()"). Suggested-by:
Ard Biesheuvel <ard.biesheuvel@linaro.org> Acked-by:
Masami Hiramatsu <mhiramat@kernel.org> Reviewed-by:
Laura Abbott <labbott@redhat.com> Signed-off-by:
Anders Roxell <anders.roxell@linaro.org> [catalin.marinas@arm.com: removed unnecessary casts] Signed-off-by:
-
Yangtao Li authored
This brings the kernel doc in line with the function signature. Signed-off-by:
Yangtao Li <tiny.windzz@gmail.com> Signed-off-by:
-
Victor Kamensky authored
After 'a66649da arm64: fix vdso-offsets.h dependency' if one will try to build .i file in case of external kernel module, build fails complaining that prepare0 target is missing. This issue came up with SystemTap when it tries to build variety of .i files for its own generated kernel modules trying to figure given kernel features/capabilities. The issue is that prepare0 is defined in top level Makefile only if KBUILD_EXTMOD is not defined. .i file rule depends on prepare and in case KBUILD_EXTMOD defined top level Makefile contains empty rule for prepare. But after mentioned commit arch/arm64/Makefile would introduce dependency on prepare0 through its own prepare target. Fix it to put proper ifdef KBUILD_EXTMOD around code introduced by mentioned commit. It matches what top level Makefile does. Acked-by:
Kevin Brodsky <kevin.brodsky@arm.com> Signed-off-by:
Victor Kamensky <kamensky@cisco.com> Signed-off-by:
-
Masahiro Yamada authored
Evaluating cc-name invokes the compiler every time even when you are not compiling anything, like 'make help'. This is not efficient. The compiler type has been already detected in the Kconfig stage. Use CONFIG_CC_IS_CLANG, instead. Signed-off-by:
Masahiro Yamada <yamada.masahiro@socionext.com> Acked-by: Michael Ellerman <mpe@ellerman.id.au> (powerpc) Acked-by: Paul Burton <paul.burton@mips.com> (MIPS) Acked-by:
Joel Stanley <joel@jms.id.au>
-
Anup Patel authored
This patch updates defconfig using savedefconfig on Linux-4.19. It is intended to have no functional change. Signed-off-by:
Anup Patel <anup@brainfault.org> Reviewed-by:
Palmer Dabbelt <palmer@sifive.com> Signed-off-by:
-
- Nov 01, 2018
-
-
Christoph Hellwig authored
Various powerpc boards select the PCI_MSI config option without selecting PCI, resulting in potentially not compilable configurations if the by default enabled PCI option is disabled. Explicitly select PCI to ensure we always have valid configs. Signed-off-by:
Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
Christoph Hellwig authored
Signed-off-by:
-
Christoph Hellwig authored
This option isn't actually used anywhere. Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by:
-
Dmitry Safonov authored
The result of in_compat_syscall() can be pictured as: x86 platform: --------------------------------------------------- | Arch\syscall | 64-bit | ia32 | x32 | |-------------------------------------------------| | x86_64 | false | true | true | |-------------------------------------------------| | i686 | | <true> | | --------------------------------------------------- Other platforms: ------------------------------------------- | Arch\syscall | 64-bit | compat | |-----------------------------------------| | 64-bit | false | true | |-----------------------------------------| | 32-bit(?) | | <false> | ------------------------------------------- As seen, the result of in_compat_syscall() on generic 32-bit platform differs from i686. There is no reason for in_compat_syscall() == true on native i686. It also easy to misread code if the result on native 32-bit platform differs between arches. Because of that non arch-specific code has many places with: if (IS_ENABLED(CONFIG_COMPAT) && in_compat_syscall()) in different variations. It looks-like the only non-x86 code which uses in_compat_syscall() not under CONFIG_COMPAT guard is in amd/amdkfd. But according to the commit a18069c1 ("amdkfd: Disable support for 32-bit user processes"), it actually should be disabled on native i686. Rename in_compat_syscall() to in_32bit_syscall() for x86-specific code and make in_compat_syscall() false under !CONFIG_COMPAT. A follow on patch will clean up generic users which were forced to check IS_ENABLED(CONFIG_COMPAT) with in_compat_syscall(). Signed-off-by:Dmitry Safonov <dima@arista.com> Signed-off-by:
Andy Lutomirski <luto@kernel.org> Cc: Dmitry Safonov <0x7f454c46@gmail.com> Cc: Ard Biesheuvel <ard.biesheuvel@linaro.org> Cc: "David S. Miller" <davem@davemloft.net> Cc: Herbert Xu <herbert@gondor.apana.org.au> Cc: "H. Peter Anvin" <hpa@zytor.com> Cc: John Stultz <john.stultz@linaro.org> Cc: "Kirill A. Shutemov" <kirill.shutemov@linux.intel.com> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Steffen Klassert <steffen.klassert@secunet.com> Cc: Stephen Boyd <sboyd@kernel.org> Cc: Steven Rostedt <rostedt@goodmis.org> Cc: linux-efi@vger.kernel.org Cc: netdev@vger.kernel.org Link: https://lkml.kernel.org/r/20181012134253.23266-2-dima@arista.com
-
Guo Ren authored
Remove the Kbuild rules in arch/csky and use common dtb build rules. This modification is based on: commit 37c8a5fa ("kbuild: consolidate Devicetree dtb build rules") Signed-off-by:
Guo Ren <ren_guo@c-sky.com> Reviewed-by:
Rob Herring <robh@kernel.org> Acked-by:
-
Guo Ren authored
Remove the builtin-dtb implementation in arch/csky. Signed-off-by:
-
David S. Miller authored
Fixes: 8b30ca73 ("sparc: Add all necessary direct socket system calls.") Reported-by:
Joseph Myers <joseph@codesourcery.com> Signed-off-by:
David S. Miller <davem@davemloft.net>
-
- Oct 31, 2018
-
-
Palmer Dabbelt authored
This should never have been inside our arch port to begin with, it's just a relic from when we were maintaining out of tree patches. Reviewed-by:
Paul Walmsley <paul.walmsley@sifive.com> Reviewed-by:
David Abdurachmanov <david.abdurachmanov@gmail.com> Signed-off-by:
-
Andreas Schwab authored
On the Hifive-U platform, cpu 0 is a masked cpu with less capabilities than the other cpus. Ignore it for the purpose of determining the hardware capabilities of the system. Signed-off-by:
Andreas Schwab <schwab@suse.de> Signed-off-by:
-
Palmer Dabbelt authored
I'm removing the generic 64-bit divide support, which means this will no longer work. This reverts commit 757331db. Signed-off-by:
-
David Hildenbrand authored
Let's perform all checking + offlining + removing under device_hotplug_lock, so nobody can mess with these devices via sysfs concurrently. [david@redhat.com: take device_hotplug_lock outside of loop] Link: http://lkml.kernel.org/r/20180927092554.13567-6-david@redhat.com Link: http://lkml.kernel.org/r/20180925091457.28651-6-david@redhat.com Signed-off-by:
David Hildenbrand <david@redhat.com> Reviewed-by:
Pavel Tatashin <pavel.tatashin@microsoft.com> Reviewed-by:
Rashmica Gupta <rashmica.g@gmail.com> Acked-by:
Balbir Singh <bsingharora@gmail.com> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Rashmica Gupta <rashmica.g@gmail.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Juergen Gross <jgross@suse.com> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Len Brown <lenb@kernel.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Mathieu Malaterre <malat@debian.org> Cc: Michal Hocko <mhocko@suse.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: Oscar Salvador <osalvador@suse.de> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Rafael J. Wysocki <rafael.j.wysocki@intel.com> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
David Hildenbrand authored
device_online() should be called with device_hotplug_lock() held. Link: http://lkml.kernel.org/r/20180925091457.28651-5-david@redhat.com Signed-off-by:
-
David Hildenbrand authored
add_memory() currently does not take the device_hotplug_lock, however is aleady called under the lock from arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c to synchronize against CPU hot-remove and similar. In general, we should hold the device_hotplug_lock when adding memory to synchronize against online/offline request (e.g. from user space) - which already resulted in lock inversions due to device_lock() and mem_hotplug_lock - see 30467e0b ("mm, hotplug: fix concurrent memory hot-add deadlock"). add_memory()/add_memory_resource() will create memory block devices, so this really feels like the right thing to do. Holding the device_hotplug_lock makes sure that a memory block device can really only be accessed (e.g. via .online/.state) from user space, once the memory has been fully added to the system. The lock is not held yet in drivers/xen/balloon.c arch/powerpc/platforms/powernv/memtrace.c drivers/s390/char/sclp_cmd.c drivers/hv/hv_balloon.c So, let's either use the locked variants or take the lock. Don't export add_memory_resource(), as it once was exported to be used by XEN, which is never built as a module. If somebody requires it, we also have to export a locked variant (as device_hotplug_lock is never exported). Link: http://lkml.kernel.org/r/20180925091457.28651-3-david@redhat.com Signed-off-by:
Rafael J. Wysocki <rafael.j.wysocki@intel.com> Reviewed-by:
Oscar Salvador <osalvador@suse.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: "Rafael J. Wysocki" <rjw@rjwysocki.net> Cc: Len Brown <lenb@kernel.org> Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org> Cc: Boris Ostrovsky <boris.ostrovsky@oracle.com> Cc: Juergen Gross <jgross@suse.com> Cc: Nathan Fontenot <nfont@linux.vnet.ibm.com> Cc: John Allen <jallen@linux.vnet.ibm.com> Cc: Michal Hocko <mhocko@suse.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Joonsoo Kim <iamjoonsoo.kim@lge.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Mathieu Malaterre <malat@debian.org> Cc: Pavel Tatashin <pavel.tatashin@microsoft.com> Cc: YASUAKI ISHIMATSU <yasu.isimatu@gmail.com> Cc: Balbir Singh <bsingharora@gmail.com> Cc: Haiyang Zhang <haiyangz@microsoft.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Jonathan Corbet <corbet@lwn.net> Cc: Kate Stewart <kstewart@linuxfoundation.org> Cc: "K. Y. Srinivasan" <kys@microsoft.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Michael Neuling <mikey@neuling.org> Cc: Philippe Ombredanne <pombredanne@nexb.com> Cc: Stephen Hemminger <sthemmin@microsoft.com> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by:
-
David Hildenbrand authored
Patch series "mm: online/offline_pages called w.o. mem_hotplug_lock", v3. Reading through the code and studying how mem_hotplug_lock is to be used, I noticed that there are two places where we can end up calling device_online()/device_offline() - online_pages()/offline_pages() without the mem_hotplug_lock. And there are other places where we call device_online()/device_offline() without the device_hotplug_lock. While e.g. echo "online" > /sys/devices/system/memory/memory9/state is fine, e.g. echo 1 > /sys/devices/system/memory/memory9/online Will not take the mem_hotplug_lock. However the device_lock() and device_hotplug_lock. E.g. via memory_probe_store(), we can end up calling add_memory()->online_pages() without the device_hotplug_lock. So we can have concurrent callers in online_pages(). We e.g. touch in online_pages() basically unprotected zone->present_pages then. Looks like there is a longer history to that (see Patch #2 for details), and fixing it to work the way it was intended is not really possible. We would e.g. have to take the mem_hotplug_lock in device/base/core.c, which sounds wrong. Summary: We had a lock inversion on mem_hotplug_lock and device_lock(). More details can be found in patch 3 and patch 6. I propose the general rules (documentation added in patch 6): 1. add_memory/add_memory_resource() must only be called with device_hotplug_lock. 2. remove_memory() must only be called with device_hotplug_lock. This is already documented and holds for all callers. 3. device_online()/device_offline() must only be called with device_hotplug_lock. This is already documented and true for now in core code. Other callers (related to memory hotplug) have to be fixed up. 4. mem_hotplug_lock is taken inside of add_memory/remove_memory/ online_pages/offline_pages. To me, this looks way cleaner than what we have right now (and easier to verify). And looking at the documentation of remove_memory, using lock_device_hotplug also for add_memory() feels natural. This patch (of 6): remove_memory() is exported right now but requires the device_hotplug_lock, which is not exported. So let's provide a variant that takes the lock and only export that one. The lock is already held in arch/powerpc/platforms/pseries/hotplug-memory.c drivers/acpi/acpi_memhotplug.c arch/powerpc/platforms/powernv/memtrace.c Apart from that, there are not other users in the tree. Link: http://lkml.kernel.org/r/20180925091457.28651-2-david@redhat.com Signed-off-by:
-
Mike Rapoport authored
When a memblock allocation APIs are called with align = 0, the alignment is implicitly set to SMP_CACHE_BYTES. Implicit alignment is done deep in the memblock allocator and it can come as a surprise. Not that such an alignment would be wrong even when used incorrectly but it is better to be explicit for the sake of clarity and the prinicple of the least surprise. Replace all such uses of memblock APIs with the 'align' parameter explicitly set to SMP_CACHE_BYTES and stop implicit alignment assignment in the memblock internal allocation functions. For the case when memblock APIs are used via helper functions, e.g. like iommu_arena_new_node() in Alpha, the helper functions were detected with Coccinelle's help and then manually examined and updated where appropriate. The direct memblock APIs users were updated using the semantic patch below: @@ expression size, min_addr, max_addr, nid; @@ ( | - memblock_alloc_try_nid_raw(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_raw(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid_nopanic(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid_nopanic(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc_try_nid(size, 0, min_addr, max_addr, nid) + memblock_alloc_try_nid(size, SMP_CACHE_BYTES, min_addr, max_addr, nid) | - memblock_alloc(size, 0) + memblock_alloc(size, SMP_CACHE_BYTES) | - memblock_alloc_raw(size, 0) + memblock_alloc_raw(size, SMP_CACHE_BYTES) | - memblock_alloc_from(size, 0, min_addr) + memblock_alloc_from(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_nopanic(size, 0) + memblock_alloc_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_low(size, 0) + memblock_alloc_low(size, SMP_CACHE_BYTES) | - memblock_alloc_low_nopanic(size, 0) + memblock_alloc_low_nopanic(size, SMP_CACHE_BYTES) | - memblock_alloc_from_nopanic(size, 0, min_addr) + memblock_alloc_from_nopanic(size, SMP_CACHE_BYTES, min_addr) | - memblock_alloc_node(size, 0, nid) + memblock_alloc_node(size, SMP_CACHE_BYTES, nid) ) [mhocko@suse.com: changelog update] [akpm@linux-foundation.org: coding-style fixes] [rppt@linux.ibm.com: fix missed uses of implicit alignment] Link: http://lkml.kernel.org/r/20181016133656.GA10925@rapoport-lnx Link: http://lkml.kernel.org/r/1538687224-17535-1-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
Mike Rapoport <rppt@linux.vnet.ibm.com> Suggested-by:
Michal Hocko <mhocko@suse.com> Acked-by: Paul Burton <paul.burton@mips.com> [MIPS] Acked-by: Michael Ellerman <mpe@ellerman.id.au> [powerpc] Acked-by:
-
Mike Rapoport authored
Move remaining definitions and declarations from include/linux/bootmem.h into include/linux/memblock.h and remove the redundant header. The includes were replaced with the semantic patch below and then semi-automated removal of duplicated '#include <linux/memblock.h> @@ @@ - #include <linux/bootmem.h> + #include <linux/memblock.h> [sfr@canb.auug.org.au: dma-direct: fix up for the removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181002185342.133d1680@canb.auug.org.au [sfr@canb.auug.org.au: powerpc: fix up for removal of linux/bootmem.h] Link: http://lkml.kernel.org/r/20181005161406.73ef8727@canb.auug.org.au [sfr@canb.auug.org.au: x86/kaslr, ACPI/NUMA: fix for linux/bootmem.h removal] Link: http://lkml.kernel.org/r/20181008190341.5e396491@canb.auug.org.au Link: http://lkml.kernel.org/r/1536927045-23536-30-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
Stephen Rothwell <sfr@canb.auug.org.au> Acked-by:
-
Mike Rapoport authored
Drop BOOTMEM_ALLOC_ACCESSIBLE and BOOTMEM_ALLOC_ANYWHERE in favor of identical MEMBLOCK definitions. Link: http://lkml.kernel.org/r/1536927045-23536-29-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
The conversion is done using sed -i 's@free_all_bootmem@memblock_free_all@' \ $(git grep -l free_all_bootmem) Link: http://lkml.kernel.org/r/1536927045-23536-26-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by: -
Mike Rapoport authored
The free_bootmem_late and memblock_free_late do exactly the same thing: they iterate over a range and give pages to the page allocator. Replace calls to free_bootmem_late with calls to memblock_free_late and remove the bootmem variant. Link: http://lkml.kernel.org/r/1536927045-23536-25-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
The free_bootmem and free_bootmem_node are merely wrappers for memblock_free. Replace their usage with a call to memblock_free using the following semantic patch: @@ expression e1, e2, e3; @@ ( - free_bootmem(e1, e2) + memblock_free(e1, e2) | - free_bootmem_node(e1, e2, e3) + memblock_free(e2, e3) ) Link: http://lkml.kernel.org/r/1536927045-23536-24-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
The alloc_bootmem(size) is a shortcut for allocation of SMP_CACHE_BYTES aligned memory. When the align parameter of memblock_alloc() is 0, the alignment is implicitly set to SMP_CACHE_BYTES and thus alloc_bootmem(size) and memblock_alloc(size, 0) are equivalent. The conversion is done using the following semantic patch: @@ expression size; @@ - alloc_bootmem(size) + memblock_alloc(size, 0) Link: http://lkml.kernel.org/r/1536927045-23536-22-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
The functions are equivalent, just the later does not require nobootmem translation layer. The conversion is done using the following semantic patch: @@ expression size, align, goal; @@ - __alloc_bootmem(size, align, goal) + memblock_alloc_from(size, align, goal) Link: http://lkml.kernel.org/r/1536927045-23536-21-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
The alloc_bootmem_pages() function allocates PAGE_SIZE aligned memory. memblock_alloc() with alignment set to PAGE_SIZE does exactly the same thing. The conversion is done using the following semantic patch: @@ expression e; @@ - alloc_bootmem_pages(e) + memblock_alloc(e, PAGE_SIZE) Link: http://lkml.kernel.org/r/1536927045-23536-20-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
The alloc_bootmem_low_pages() function allocates PAGE_SIZE aligned regions from low memory. memblock_alloc_low() with alignment set to PAGE_SIZE does exactly the same thing. The conversion is done using the following semantic patch: @@ expression e; @@ - alloc_bootmem_low_pages(e) + memblock_alloc_low(e, PAGE_SIZE) Link: http://lkml.kernel.org/r/1536927045-23536-19-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
Both functions attempt to allocate memory with specified alignment from a particular node. If the allocation from that node fails, they both fall back to allocating from any node in the system. Usage of native memblock API eliminates the nobootmem translation layer. Link: http://lkml.kernel.org/r/1536927045-23536-18-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
Use memblock_alloc_try_nid whenever goal (i.e. minimal address is specified) and memblock_alloc_node otherwise. Link: http://lkml.kernel.org/r/1536927045-23536-17-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
The functions are equivalent, just the later does not require nobootmem translation layer. Link: http://lkml.kernel.org/r/1536927045-23536-16-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
Mike Rapoport authored
When __alloc_bootmem_nopanic() is used with explicit lower limit for the allocation it attempts to allocate memory at or above that limit and falls back to allocation with no limit set. The memblock_alloc_from_nopanic() does exactly the same thing and can be used as a replacement for __alloc_bootmem_nopanic() is such cases. Link: http://lkml.kernel.org/r/1536927045-23536-14-git-send-email-rppt@linux.vnet.ibm.com Signed-off-by:
-
