traps.c

	case 3:
		break;
	}

	force_sig(SIGILL, current);
}

asmlinkage void do_mdmx(struct pt_regs *regs)
{
	force_sig(SIGILL, current);
}

/*
 * Called with interrupts disabled.
 */
asmlinkage void do_watch(struct pt_regs *regs)
{
	u32 cause;

	/*
	 * Clear WP (bit 22) bit of cause register so we don't loop
	 * forever.
	 */
	cause = read_c0_cause();
	cause &= ~(1 << 22);
	write_c0_cause(cause);

	/*
	 * If the current thread has the watch registers loaded, save
	 * their values and send SIGTRAP.  Otherwise another thread
	 * left the registers set, clear them and continue.
	 */
	if (test_tsk_thread_flag(current, TIF_LOAD_WATCH)) {
		mips_read_watch_registers();
		local_irq_enable();
		force_sig(SIGTRAP, current);
	} else {
		mips_clear_watch_registers();
		local_irq_enable();
	}
}

asmlinkage void do_mcheck(struct pt_regs *regs)
{
	const int field = 2 * sizeof(unsigned long);
	int multi_match = regs->cp0_status & ST0_TS;

	show_regs(regs);

	if (multi_match) {
		printk("Index   : %0x\n", read_c0_index());
		printk("Pagemask: %0x\n", read_c0_pagemask());
		printk("EntryHi : %0*lx\n", field, read_c0_entryhi());
		printk("EntryLo0: %0*lx\n", field, read_c0_entrylo0());
		printk("EntryLo1: %0*lx\n", field, read_c0_entrylo1());
		printk("\n");
		dump_tlb_all();
	}

	show_code((unsigned int __user *) regs->cp0_epc);

	/*
	 * Some chips may have other causes of machine check (e.g. SB1
	 * graduation timer)
	 */
	panic("Caught Machine Check exception - %scaused by multiple "
	      "matching entries in the TLB.",
	      (multi_match) ? "" : "not ");
}

asmlinkage void do_mt(struct pt_regs *regs)
{
	int subcode;

	subcode = (read_vpe_c0_vpecontrol() & VPECONTROL_EXCPT)
			>> VPECONTROL_EXCPT_SHIFT;
	switch (subcode) {
	case 0:
		printk(KERN_DEBUG "Thread Underflow\n");
		break;
	case 1:
		printk(KERN_DEBUG "Thread Overflow\n");
		break;
	case 2:
		printk(KERN_DEBUG "Invalid YIELD Qualifier\n");
		break;
	case 3:
		printk(KERN_DEBUG "Gating Storage Exception\n");
		break;
	case 4:
		printk(KERN_DEBUG "YIELD Scheduler Exception\n");
		break;
	case 5:
		printk(KERN_DEBUG "Gating Storage Schedulier Exception\n");
		break;
	default:
		printk(KERN_DEBUG "*** UNKNOWN THREAD EXCEPTION %d ***\n",
			subcode);
		break;
	}
	die_if_kernel("MIPS MT Thread exception in kernel", regs);

	force_sig(SIGILL, current);
}


asmlinkage void do_dsp(struct pt_regs *regs)
{
	if (cpu_has_dsp)
		panic("Unexpected DSP exception\n");

	force_sig(SIGILL, current);
}

asmlinkage void do_reserved(struct pt_regs *regs)
{
	/*
	 * Game over - no way to handle this if it ever occurs.  Most probably
	 * caused by a new unknown cpu type or after another deadly
	 * hard/software error.
	 */
	show_regs(regs);
	panic("Caught reserved exception %ld - should not happen.",
	      (regs->cp0_cause & 0x7f) >> 2);
}

static int __initdata l1parity = 1;
static int __init nol1parity(char *s)
{
	l1parity = 0;
	return 1;
}
__setup("nol1par", nol1parity);
static int __initdata l2parity = 1;
static int __init nol2parity(char *s)
{
	l2parity = 0;
	return 1;
}
__setup("nol2par", nol2parity);

/*
 * Some MIPS CPUs can enable/disable for cache parity detection, but do
 * it different ways.
 */
static inline void parity_protection_init(void)
{
	switch (current_cpu_type()) {
	case CPU_24K:
	case CPU_34K:
	case CPU_74K:
	case CPU_1004K:
		{
#define ERRCTL_PE	0x80000000
#define ERRCTL_L2P	0x00800000
			unsigned long errctl;
			unsigned int l1parity_present, l2parity_present;

			errctl = read_c0_ecc();
			errctl &= ~(ERRCTL_PE|ERRCTL_L2P);

			/* probe L1 parity support */
			write_c0_ecc(errctl | ERRCTL_PE);
			back_to_back_c0_hazard();
			l1parity_present = (read_c0_ecc() & ERRCTL_PE);

			/* probe L2 parity support */
			write_c0_ecc(errctl|ERRCTL_L2P);
			back_to_back_c0_hazard();
			l2parity_present = (read_c0_ecc() & ERRCTL_L2P);

			if (l1parity_present && l2parity_present) {
				if (l1parity)
					errctl |= ERRCTL_PE;
				if (l1parity ^ l2parity)
					errctl |= ERRCTL_L2P;
			} else if (l1parity_present) {
				if (l1parity)
					errctl |= ERRCTL_PE;
			} else if (l2parity_present) {
				if (l2parity)
					errctl |= ERRCTL_L2P;
			} else {
				/* No parity available */
			}

			printk(KERN_INFO "Writing ErrCtl register=%08lx\n", errctl);

			write_c0_ecc(errctl);
			back_to_back_c0_hazard();
			errctl = read_c0_ecc();
			printk(KERN_INFO "Readback ErrCtl register=%08lx\n", errctl);

			if (l1parity_present)
				printk(KERN_INFO "Cache parity protection %sabled\n",
				       (errctl & ERRCTL_PE) ? "en" : "dis");

			if (l2parity_present) {
				if (l1parity_present && l1parity)
					errctl ^= ERRCTL_L2P;
				printk(KERN_INFO "L2 cache parity protection %sabled\n",
				       (errctl & ERRCTL_L2P) ? "en" : "dis");
			}
		}
		break;

	case CPU_5KC:
		write_c0_ecc(0x80000000);
		back_to_back_c0_hazard();
		/* Set the PE bit (bit 31) in the c0_errctl register. */
		printk(KERN_INFO "Cache parity protection %sabled\n",
		       (read_c0_ecc() & 0x80000000) ? "en" : "dis");
		break;
	case CPU_20KC:
	case CPU_25KF:
		/* Clear the DE bit (bit 16) in the c0_status register. */
		printk(KERN_INFO "Enable cache parity protection for "
		       "MIPS 20KC/25KF CPUs.\n");
		clear_c0_status(ST0_DE);
		break;
	default:
		break;
	}
}

asmlinkage void cache_parity_error(void)
{
	const int field = 2 * sizeof(unsigned long);
	unsigned int reg_val;

	/* For the moment, report the problem and hang. */
	printk("Cache error exception:\n");
	printk("cp0_errorepc == %0*lx\n", field, read_c0_errorepc());
	reg_val = read_c0_cacheerr();
	printk("c0_cacheerr == %08x\n", reg_val);

	printk("Decoded c0_cacheerr: %s cache fault in %s reference.\n",
	       reg_val & (1<<30) ? "secondary" : "primary",
	       reg_val & (1<<31) ? "data" : "insn");
	printk("Error bits: %s%s%s%s%s%s%s\n",
	       reg_val & (1<<29) ? "ED " : "",
	       reg_val & (1<<28) ? "ET " : "",
	       reg_val & (1<<26) ? "EE " : "",
	       reg_val & (1<<25) ? "EB " : "",
	       reg_val & (1<<24) ? "EI " : "",
	       reg_val & (1<<23) ? "E1 " : "",
	       reg_val & (1<<22) ? "E0 " : "");
	printk("IDX: 0x%08x\n", reg_val & ((1<<22)-1));

#if defined(CONFIG_CPU_MIPS32) || defined(CONFIG_CPU_MIPS64)
	if (reg_val & (1<<22))
		printk("DErrAddr0: 0x%0*lx\n", field, read_c0_derraddr0());

	if (reg_val & (1<<23))
		printk("DErrAddr1: 0x%0*lx\n", field, read_c0_derraddr1());
#endif

	panic("Can't handle the cache error!");
}

/*
 * SDBBP EJTAG debug exception handler.
 * We skip the instruction and return to the next instruction.
 */
void ejtag_exception_handler(struct pt_regs *regs)
{
	const int field = 2 * sizeof(unsigned long);
	unsigned long depc, old_epc;
	unsigned int debug;

	printk(KERN_DEBUG "SDBBP EJTAG debug exception - not handled yet, just ignored!\n");
	depc = read_c0_depc();
	debug = read_c0_debug();
	printk(KERN_DEBUG "c0_depc = %0*lx, DEBUG = %08x\n", field, depc, debug);
	if (debug & 0x80000000) {
		/*
		 * In branch delay slot.
		 * We cheat a little bit here and use EPC to calculate the
		 * debug return address (DEPC). EPC is restored after the
		 * calculation.
		 */
		old_epc = regs->cp0_epc;
		regs->cp0_epc = depc;
		__compute_return_epc(regs);
		depc = regs->cp0_epc;
		regs->cp0_epc = old_epc;
	} else
		depc += 4;
	write_c0_depc(depc);

#if 0
	printk(KERN_DEBUG "\n\n----- Enable EJTAG single stepping ----\n\n");
	write_c0_debug(debug | 0x100);
#endif
}

/*
 * NMI exception handler.
 */
NORET_TYPE void ATTRIB_NORET nmi_exception_handler(struct pt_regs *regs)
{
	bust_spinlocks(1);
	printk("NMI taken!!!!\n");
	die("NMI", regs);
}

#define VECTORSPACING 0x100	/* for EI/VI mode */

unsigned long ebase;
unsigned long exception_handlers[32];
unsigned long vi_handlers[64];

void __init *set_except_vector(int n, void *addr)
{
	unsigned long handler = (unsigned long) addr;
	unsigned long old_handler = exception_handlers[n];

	exception_handlers[n] = handler;
	if (n == 0 && cpu_has_divec) {
		unsigned long jump_mask = ~((1 << 28) - 1);
		u32 *buf = (u32 *)(ebase + 0x200);
		unsigned int k0 = 26;
		if ((handler & jump_mask) == ((ebase + 0x200) & jump_mask)) {
			uasm_i_j(&buf, handler & ~jump_mask);
			uasm_i_nop(&buf);
		} else {
			UASM_i_LA(&buf, k0, handler);
			uasm_i_jr(&buf, k0);
			uasm_i_nop(&buf);
		}
		local_flush_icache_range(ebase + 0x200, (unsigned long)buf);
	}
	return (void *)old_handler;
}

static asmlinkage void do_default_vi(void)
{
	show_regs(get_irq_regs());
	panic("Caught unexpected vectored interrupt.");
}

static void *set_vi_srs_handler(int n, vi_handler_t addr, int srs)
{
	unsigned long handler;
	unsigned long old_handler = vi_handlers[n];
	int srssets = current_cpu_data.srsets;
	u32 *w;
	unsigned char *b;

	BUG_ON(!cpu_has_veic && !cpu_has_vint);

	if (addr == NULL) {
		handler = (unsigned long) do_default_vi;
		srs = 0;
	} else
		handler = (unsigned long) addr;
	vi_handlers[n] = (unsigned long) addr;

	b = (unsigned char *)(ebase + 0x200 + n*VECTORSPACING);

	if (srs >= srssets)
		panic("Shadow register set %d not supported", srs);

	if (cpu_has_veic) {
		if (board_bind_eic_interrupt)
			board_bind_eic_interrupt(n, srs);
	} else if (cpu_has_vint) {
		/* SRSMap is only defined if shadow sets are implemented */
		if (srssets > 1)
			change_c0_srsmap(0xf << n*4, srs << n*4);
	}

	if (srs == 0) {
		/*
		 * If no shadow set is selected then use the default handler
		 * that does normal register saving and a standard interrupt exit
		 */

		extern char except_vec_vi, except_vec_vi_lui;
		extern char except_vec_vi_ori, except_vec_vi_end;
		extern char rollback_except_vec_vi;
		char *vec_start = (cpu_wait == r4k_wait) ?
			&rollback_except_vec_vi : &except_vec_vi;
#ifdef CONFIG_MIPS_MT_SMTC
		/*
		 * We need to provide the SMTC vectored interrupt handler
		 * not only with the address of the handler, but with the
		 * Status.IM bit to be masked before going there.
		 */
		extern char except_vec_vi_mori;
		const int mori_offset = &except_vec_vi_mori - vec_start;
#endif /* CONFIG_MIPS_MT_SMTC */
		const int handler_len = &except_vec_vi_end - vec_start;
		const int lui_offset = &except_vec_vi_lui - vec_start;
		const int ori_offset = &except_vec_vi_ori - vec_start;

		if (handler_len > VECTORSPACING) {
			/*
			 * Sigh... panicing won't help as the console
			 * is probably not configured :(
			 */
			panic("VECTORSPACING too small");
		}

		memcpy(b, vec_start, handler_len);
#ifdef CONFIG_MIPS_MT_SMTC
		BUG_ON(n > 7);	/* Vector index %d exceeds SMTC maximum. */

		w = (u32 *)(b + mori_offset);
		*w = (*w & 0xffff0000) | (0x100 << n);
#endif /* CONFIG_MIPS_MT_SMTC */
		w = (u32 *)(b + lui_offset);
		*w = (*w & 0xffff0000) | (((u32)handler >> 16) & 0xffff);
		w = (u32 *)(b + ori_offset);
		*w = (*w & 0xffff0000) | ((u32)handler & 0xffff);
		local_flush_icache_range((unsigned long)b,
					 (unsigned long)(b+handler_len));
	}
	else {
		/*
		 * In other cases jump directly to the interrupt handler
		 *
		 * It is the handlers responsibility to save registers if required
		 * (eg hi/lo) and return from the exception using "eret"
		 */
		w = (u32 *)b;
		*w++ = 0x08000000 | (((u32)handler >> 2) & 0x03fffff); /* j handler */
		*w = 0;
		local_flush_icache_range((unsigned long)b,
					 (unsigned long)(b+8));
	}

	return (void *)old_handler;
}

void *set_vi_handler(int n, vi_handler_t addr)
{
	return set_vi_srs_handler(n, addr, 0);
}

extern void cpu_cache_init(void);
extern void tlb_init(void);
extern void flush_tlb_handlers(void);

/*
 * Timer interrupt
 */
int cp0_compare_irq;
int cp0_compare_irq_shift;

/*
 * Performance counter IRQ or -1 if shared with timer
 */
int cp0_perfcount_irq;
EXPORT_SYMBOL_GPL(cp0_perfcount_irq);

static int __cpuinitdata noulri;

static int __init ulri_disable(char *s)
{
	pr_info("Disabling ulri\n");
	noulri = 1;

	return 1;
}
__setup("noulri", ulri_disable);

void __cpuinit per_cpu_trap_init(void)
{
	unsigned int cpu = smp_processor_id();
	unsigned int status_set = ST0_CU0;
#ifdef CONFIG_MIPS_MT_SMTC
	int secondaryTC = 0;
	int bootTC = (cpu == 0);

	/*
	 * Only do per_cpu_trap_init() for first TC of Each VPE.
	 * Note that this hack assumes that the SMTC init code
	 * assigns TCs consecutively and in ascending order.
	 */

	if (((read_c0_tcbind() & TCBIND_CURTC) != 0) &&
	    ((read_c0_tcbind() & TCBIND_CURVPE) == cpu_data[cpu - 1].vpe_id))
		secondaryTC = 1;
#endif /* CONFIG_MIPS_MT_SMTC */

	/*
	 * Disable coprocessors and select 32-bit or 64-bit addressing
	 * and the 16/32 or 32/32 FPR register model.  Reset the BEV
	 * flag that some firmware may have left set and the TS bit (for
	 * IP27).  Set XX for ISA IV code to work.
	 */
#ifdef CONFIG_64BIT
	status_set |= ST0_FR|ST0_KX|ST0_SX|ST0_UX;
#endif
	if (current_cpu_data.isa_level == MIPS_CPU_ISA_IV)
		status_set |= ST0_XX;
	if (cpu_has_dsp)
		status_set |= ST0_MX;

	change_c0_status(ST0_CU|ST0_MX|ST0_RE|ST0_FR|ST0_BEV|ST0_TS|ST0_KX|ST0_SX|ST0_UX,
			 status_set);

	if (cpu_has_mips_r2) {
		unsigned int enable = 0x0000000f | cpu_hwrena_impl_bits;

		if (!noulri && cpu_has_userlocal)
			enable |= (1 << 29);

		write_c0_hwrena(enable);
	}

#ifdef CONFIG_MIPS_MT_SMTC
	if (!secondaryTC) {
#endif /* CONFIG_MIPS_MT_SMTC */

	if (cpu_has_veic || cpu_has_vint) {
		unsigned long sr = set_c0_status(ST0_BEV);
		write_c0_ebase(ebase);
		write_c0_status(sr);
		/* Setting vector spacing enables EI/VI mode  */
		change_c0_intctl(0x3e0, VECTORSPACING);
	}
	if (cpu_has_divec) {
		if (cpu_has_mipsmt) {
			unsigned int vpflags = dvpe();
			set_c0_cause(CAUSEF_IV);
			evpe(vpflags);
		} else
			set_c0_cause(CAUSEF_IV);
	}

	/*
	 * Before R2 both interrupt numbers were fixed to 7, so on R2 only:
	 *
	 *  o read IntCtl.IPTI to determine the timer interrupt
	 *  o read IntCtl.IPPCI to determine the performance counter interrupt
	 */
	if (cpu_has_mips_r2) {
		cp0_compare_irq_shift = CAUSEB_TI - CAUSEB_IP;
		cp0_compare_irq = (read_c0_intctl() >> INTCTLB_IPTI) & 7;
		cp0_perfcount_irq = (read_c0_intctl() >> INTCTLB_IPPCI) & 7;
		if (cp0_perfcount_irq == cp0_compare_irq)
			cp0_perfcount_irq = -1;
	} else {
		cp0_compare_irq = CP0_LEGACY_COMPARE_IRQ;
		cp0_compare_irq_shift = cp0_compare_irq;
		cp0_perfcount_irq = -1;
	}

#ifdef CONFIG_MIPS_MT_SMTC
	}
#endif /* CONFIG_MIPS_MT_SMTC */

	cpu_data[cpu].asid_cache = ASID_FIRST_VERSION;
	TLBMISS_HANDLER_SETUP();

	atomic_inc(&init_mm.mm_count);
	current->active_mm = &init_mm;
	BUG_ON(current->mm);
	enter_lazy_tlb(&init_mm, current);

#ifdef CONFIG_MIPS_MT_SMTC
	if (bootTC) {
#endif /* CONFIG_MIPS_MT_SMTC */
		cpu_cache_init();
		tlb_init();
#ifdef CONFIG_MIPS_MT_SMTC
	} else if (!secondaryTC) {
		/*
		 * First TC in non-boot VPE must do subset of tlb_init()
		 * for MMU countrol registers.
		 */
		write_c0_pagemask(PM_DEFAULT_MASK);
		write_c0_wired(0);
	}
#endif /* CONFIG_MIPS_MT_SMTC */
}

/* Install CPU exception handler */
void __init set_handler(unsigned long offset, void *addr, unsigned long size)
{
	memcpy((void *)(ebase + offset), addr, size);
	local_flush_icache_range(ebase + offset, ebase + offset + size);
}

static char panic_null_cerr[] __cpuinitdata =
	"Trying to set NULL cache error exception handler";

/*
 * Install uncached CPU exception handler.
 * This is suitable only for the cache error exception which is the only
 * exception handler that is being run uncached.
 */
void __cpuinit set_uncached_handler(unsigned long offset, void *addr,
	unsigned long size)
{
	unsigned long uncached_ebase = CKSEG1ADDR(ebase);

	if (!addr)
		panic(panic_null_cerr);

	memcpy((void *)(uncached_ebase + offset), addr, size);
}

static int __initdata rdhwr_noopt;
static int __init set_rdhwr_noopt(char *str)
{
	rdhwr_noopt = 1;
	return 1;
}

__setup("rdhwr_noopt", set_rdhwr_noopt);

void __init trap_init(void)
{
	extern char except_vec3_generic, except_vec3_r4000;
	extern char except_vec4;
	unsigned long i;
	int rollback;

	check_wait();
	rollback = (cpu_wait == r4k_wait);

#if defined(CONFIG_KGDB)
	if (kgdb_early_setup)
		return;	/* Already done */
#endif

	if (cpu_has_veic || cpu_has_vint) {
		unsigned long size = 0x200 + VECTORSPACING*64;
		ebase = (unsigned long)
			__alloc_bootmem(size, 1 << fls(size), 0);
	} else {
		ebase = CKSEG0;
		if (cpu_has_mips_r2)
			ebase += (read_c0_ebase() & 0x3ffff000);
	}

	per_cpu_trap_init();

	/*
	 * Copy the generic exception handlers to their final destination.
	 * This will be overriden later as suitable for a particular
	 * configuration.
	 */
	set_handler(0x180, &except_vec3_generic, 0x80);

	/*
	 * Setup default vectors
	 */
	for (i = 0; i <= 31; i++)
		set_except_vector(i, handle_reserved);

	/*
	 * Copy the EJTAG debug exception vector handler code to it's final
	 * destination.
	 */
	if (cpu_has_ejtag && board_ejtag_handler_setup)
		board_ejtag_handler_setup();

	/*
	 * Only some CPUs have the watch exceptions.
	 */
	if (cpu_has_watch)
		set_except_vector(23, handle_watch);

	/*
	 * Initialise interrupt handlers
	 */
	if (cpu_has_veic || cpu_has_vint) {
		int nvec = cpu_has_veic ? 64 : 8;
		for (i = 0; i < nvec; i++)
			set_vi_handler(i, NULL);
	}
	else if (cpu_has_divec)
		set_handler(0x200, &except_vec4, 0x8);

	/*
	 * Some CPUs can enable/disable for cache parity detection, but does
	 * it different ways.
	 */
	parity_protection_init();

	/*
	 * The Data Bus Errors / Instruction Bus Errors are signaled
	 * by external hardware.  Therefore these two exceptions
	 * may have board specific handlers.
	 */
	if (board_be_init)
		board_be_init();

	set_except_vector(0, rollback ? rollback_handle_int : handle_int);
	set_except_vector(1, handle_tlbm);
	set_except_vector(2, handle_tlbl);
	set_except_vector(3, handle_tlbs);

	set_except_vector(4, handle_adel);
	set_except_vector(5, handle_ades);

	set_except_vector(6, handle_ibe);
	set_except_vector(7, handle_dbe);

	set_except_vector(8, handle_sys);
	set_except_vector(9, handle_bp);
	set_except_vector(10, rdhwr_noopt ? handle_ri :
			  (cpu_has_vtag_icache ?
			   handle_ri_rdhwr_vivt : handle_ri_rdhwr));
	set_except_vector(11, handle_cpu);
	set_except_vector(12, handle_ov);
	set_except_vector(13, handle_tr);

	if (current_cpu_type() == CPU_R6000 ||
	    current_cpu_type() == CPU_R6000A) {
		/*
		 * The R6000 is the only R-series CPU that features a machine
		 * check exception (similar to the R4000 cache error) and
		 * unaligned ldc1/sdc1 exception.  The handlers have not been
		 * written yet.  Well, anyway there is no R6000 machine on the
		 * current list of targets for Linux/MIPS.
		 * (Duh, crap, there is someone with a triple R6k machine)
		 */
		//set_except_vector(14, handle_mc);
		//set_except_vector(15, handle_ndc);
	}


	if (board_nmi_handler_setup)
		board_nmi_handler_setup();

	if (cpu_has_fpu && !cpu_has_nofpuex)
		set_except_vector(15, handle_fpe);

	set_except_vector(22, handle_mdmx);

	if (cpu_has_mcheck)
		set_except_vector(24, handle_mcheck);

	if (cpu_has_mipsmt)
		set_except_vector(25, handle_mt);

	set_except_vector(26, handle_dsp);

	if (cpu_has_vce)
		/* Special exception: R4[04]00 uses also the divec space. */
		memcpy((void *)(ebase + 0x180), &except_vec3_r4000, 0x100);
	else if (cpu_has_4kex)
		memcpy((void *)(ebase + 0x180), &except_vec3_generic, 0x80);
	else
		memcpy((void *)(ebase + 0x080), &except_vec3_generic, 0x80);

	local_flush_icache_range(ebase, ebase + 0x400);
	flush_tlb_handlers();

	sort_extable(__start___dbe_table, __stop___dbe_table);

	cu2_notifier(default_cu2_call, 0x80000000);	/* Run last  */
}