- Dec 16, 2011
-
-
Richard Kuo authored
As of commit dd472da3, rwsem.h was moved into asm-generic. This patch removes the arch file and points the build at its new location. Signed-off-by:
Richard Kuo <rkuo@codeaurora.org> Signed-off-by:
Benjamin Herrenschmidt <benh@kernel.crashing.org>
-
Benjamin Herrenschmidt authored
Conflicts: arch/powerpc/platforms/40x/ppc40x_simple.c
-
Benjamin Herrenschmidt authored
The code for "powersurge" SMP would kick in and cause a crash at boot due to the lack of a NULL test. Signed-off-by: -
Benjamin Herrenschmidt authored
In the old days, we treated all interrupts from the legacy Apple home made interrupt controllers as level, with a trick reading the "level" register along with the "event" register to work arounds bugs where it would occasionally fail to latch some events. Doing so appeared to work fine for both level and edge interrupts. Later on, we discovered in Darwin source the magic masks that define which interrupts are actually level and which are edge, and implemented a different algorithm, more similar to what Apple does, that treats those differently. I recently discovered however that this caused problems (including loss of interrupts) with an old Wallstreet PowerBook when trying to use the internal modem (connected to a cascaded controller). It looks like some interrupts are treated as edge while they are really level and I'm starting to seriously doubt the correctness of the Darwin code (which has other obvious bugs when you read it, so ...) This patch reverts to our original behaviour of treating everything as a level interrupt. It appears to solve the problems with the modem on the Wallstreet and everything else seems to be working properly as well. Signed-off-by: -
Benjamin Herrenschmidt authored
This patch reworks & simplifies pmac_zilog handling of suspend/resume, essentially removing all the specific code in there and using the generic uart helpers. This required properly registering the tty as a child of the macio (or platform) device, so I had to delay the registration a bit (we used to register the ports very very early). We still register the kernel console early though. I removed a couple of unused or useless flags as well, relying on the core to not call us when asleep. I also removed the essentially useless interrupt mutex, simplifying the locking a bit. I removed some code for handling unexpected interrupt which should never be hit and could potentially be harmful (causing us to access a register on a powered off SCC). We diable port interrupts on close always so there should be no need to drain data on a closed port. Signed-off-by: -
Benjamin Herrenschmidt authored
-
Benjamin Herrenschmidt authored
-
Benjamin Herrenschmidt authored
-
- Dec 09, 2011
-
-
Tony Breeds authored
Based on original work by David 'Shaggy' Kleikamp. Signed-off-by:
Tony Breeds <tony@bakeyournoodle.com> Signed-off-by:
Josh Boyer <jwboyer@gmail.com>
-
Tony Breeds authored
Based on original work by David 'Shaggy' Kleikamp. Signed-off-by:
-
Tony Breeds authored
Needed for currituck support. Signed-off-by:
-
Tony Breeds authored
The upcomming currituck patches will need to do 64-bit shifts which will fail with undefined symbol without this patch. I looked at linking against libgcc but we can't guarantee that libgcc was compiled with soft-float. Also Using ../lib/div64.S or ../kernel/misc_32.S, this will break the build as the .o's need to be built with different flags for the bootwrapper vs the kernel. So for now the easyest option is to just copy code from arch/powerpc/kernel/misc_32.S I don't think this code changes too often ;P Signed-off-by:
-
Christoph Egger authored
CONFIG_PPC47x doesn't exist in Kconfig and no 476 processor calls this function ppc44x_pin_tlb() as it has it's own ppc47x_pin_tlb(). This code is probably an artifact of the original 476 code that shouldn't have made it upstream. Signed-off-by:
Christoph Egger <siccegge@cs.fau.de> Signed-off-by:
-
Tony Breeds authored
Needed if you want to use swiotlb, harmless otherwise. Signed-off-by:
-
Tony Breeds authored
Currituck doesn't need nor use SDR so aborting the pci setup if there is no sdr-base would be bad. Add a flag to ppc4xx_pciex_hwops for the backends to state if they need SDR and then only complain and abort if they do and it's not found in the device tree. Signed-off-by:
-
Tony Breeds authored
Signed-off-by:
-
- Dec 08, 2011
-
-
Anton Blanchard authored
Most distros use it so we may as well enable it and get regular compile testing. Signed-off-by:
Anton Blanchard <anton@samba.org> Signed-off-by:
-
Anton Blanchard authored
When issuing a system reset we almost always oops in the oops_to_nvram code because multiple CPUs are using the deflate work area. Add a spinlock to protect it. To play it safe I'm using trylock to avoid locking up if the NVRAM code oopses. This means we might miss multiple CPUs oopsing at exactly the same time but I think it's best to play it safe for now. Once we are happy with the reliability we can change it to a full spinlock. Signed-off-by:
Jim Keniston <jkenisto@us.ibm.com> Signed-off-by:
-
Finn Thain authored
On most 68k Macs the SCC IRQ is an autovector interrupt and cannot be masked. This can be a problem when pmac_zilog starts up. For example, the serial debugging code in arch/m68k/kernel/head.S may be used beforehand. It disables the SCC interrupts at the chip but doesn't ack them. Then when a pmac_zilog port is used, the machine locks up with "unexpected interrupt". This can happen in pmz_shutdown() since the irq is freed before the channel interrupts are disabled. Fix this by clearing interrupt enable bits before the handler is uninstalled. Also move the interrupt control bit flipping into a separate pmz_interrupt_control() routine. Replace all instances of these operations with calls to this routine. Omit the zssync() calls that seem to serve no purpose. Signed-off-by:
Finn Thain <fthain@telegraphics.com.au> Acked-by:
Alan Cox <alan@linux.intel.com> Signed-off-by:
-
Paul Mackerras authored
This fixes a problem where a CPU thread coming out of nap mode can think it has valid values in the nonvolatile GPRs (r14 - r31) as saved away in power7_idle, but in fact the values have been trashed because the thread was used for KVM in the mean time. The result is that the thread crashes because code that called power7_idle (e.g., pnv_smp_cpu_kill_self()) goes to use values in registers that have been trashed. The bit field in SRR1 that tells whether state was lost only reflects the most recent nap, which may not have been the nap instruction in power7_idle. So we need an extra PACA field to indicate that state has been lost even if SRR1 indicates that the most recent nap didn't lose state. We clear this field when saving the state in power7_idle, we set it to a non-zero value when we use the thread for KVM, and we test it in power7_wakeup_noloss. Signed-off-by:
Paul Mackerras <paulus@samba.org> Signed-off-by:
-
Paul Mackerras authored
At present, on the powernv platform, if you off-line a CPU that was online, and then try to on-line it again, the kernel generates a warning message "OPAL Error -1 starting CPU n". Furthermore, if the CPU is a secondary thread that was used by KVM while it was off-line, the CPU fails to come online. The first problem is fixed by only calling OPAL to start the CPU the first time it is on-lined, as indicated by the cpu_start field of its PACA being zero. The second problem is fixed by restoring the cpu_start field to 1 instead of 0 when using the CPU within KVM. Signed-off-by:
-
Anton Blanchard authored
The minimum RMO size field in ibm,client-architecture is currently ignored, but a future firmware version will rectify that. Since we always get at least 128MB of RMO right now, asking for 64MB is likely to result in boot failures. We should bump it to at least 128MB, but considering all the boot issues we have on 128MB RMO boxes and all new machines have virtual RMO, we may as well set our minimum to 256MB. Signed-off-by:
-
sukadev@linux.vnet.ibm.com authored
With CONFIG_STRICT_DEVMEM=y, user space cannot read any part of /dev/mem. Since this breaks librtas, punch a hole in /dev/mem to allow access to the rmo_buffer that librtas needs. Anton Blanchard reported the problem and helped with the fix. A quick test for this patch: # cat /proc/rtas/rmo_buffer 000000000f190000 10000 # python -c "print 0x000000000f190000 / 0x10000" 3865 # dd if=/dev/mem of=/tmp/foo count=1 bs=64k skip=3865 1+0 records in 1+0 records out 65536 bytes (66 kB) copied, 0.000205235 s, 319 MB/s # dd if=/dev/mem of=/tmp/foo dd: reading `/dev/mem': Operation not permitted 0+0 records in 0+0 records out 0 bytes (0 B) copied, 0.00022519 s, 0.0 kB/s Signed-off-by:Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com> Signed-off-by:
-
Benjamin Herrenschmidt authored
So I've had one of these for a while and it looks like the vendor never bothered submitting the support upstream. This adds it using ppc40x_simple and provides a device-tree. There are some changes to the boot wrapper because the way u-boot works on this thing, it seems to expect a multipart image with the kernel, initrd and dtb in it. The USB support is missing as it needs the yet unmerged driver for the DWC OTG part and the GPIOs may need further definition in the dts. Signed-off-by: -
Geoff Levand authored
Refresh ps3_defconfig to latest kernel sources and change the options: CONFIG_PPP=m to CONFIG_PPP=n. CONFIG_NAMESPACES=y to CONFIG_NAMESPACES=n CONFIG_NUMA=y to CONFIG_NUMA=n Signed-off-by:
Geoff Levand <geoff@infradead.org> Signed-off-by:
-
Geoff Levand authored
Add an __init annotation to the ps3_smp_probe() routine. Fixes build warnings like these when CONFIG_DEBUG_SECTION_MISMATCH=y: WARNING: Section mismatch in reference from the function .ps3_smp_probe() Signed-off-by:
-
Geoff Levand authored
Fix some PS3 repository.c build warnings when DEBUG is defined. Also change most pr_debug calls to pr_devel calls. Fixes warnings like these: format '%lx' expects type 'long unsigned int', but argument 7 has type 'u64' Signed-off-by:
-
Geoff Levand authored
The lv1 hcall #91 should be named lv1_read_repository_node, and not lv1_get_repository_node_value. Adjust the lv1 hcall table and all calls. Signed-off-by:
-
Geoff Levand authored
The lv1_get_version_info hcall takes 2, not 1 output arguments. Adjust the lv1 hcall table and all calls. Usage: int lv1_get_version_info(u64 *version_number, u64 *vendor_id) Signed-off-by:
-
Geoff Levand authored
The lv1_get_virtual_address_space_id_of_ppe hcall takes 0, not 1 input arguments. Adjust the lv1 hcall table and all calls. Signed-off-by:
-
Geoff Levand authored
The lv1_net_stop_tx_dma and net_stop_rx_dma hcalls take 2, not 3 input arguments. Adjust the lv1 hcall table and all calls. Signed-off-by:
-
Geoff Levand authored
General code cleanup for PS3 interrupt.c: o Fill out comments for structure members. o Move variables ipi_debug_brk_mask and lock from struct ps3_bmp to struct ps3_private. o Fix pr_debug build errors when DEBUG is defined. o Convert bit operation to set_bit(). o Convert DBG macro from pr_debug to pr_devel o Add new macro FAIL to replace pr_debug calls Signed-off-by:
-
Anton Blanchard authored
We might enter the secondary CPU capture code twice, eg if we have to unstick some CPUs with a system reset. In this case we don't want to overwrite the state on CPUs that had made it into the capture code OK, so use the cpus_state_saved cpumask for that and make it local to crash_ipi_callback. For controlling progress now use atomic_t cpus_in_crash to count how many CPUs have made it into the kdump code, and time_to_dump to tell everyone it's time to dump. Signed-off-by:
-
Anton Blanchard authored
If we enter the kdump code via system reset, wait a bit before sending the IPI to capture all secondary CPUs. Without it we race with the hypervisor that is issuing the system reset to each CPU. If the IPI gets there first the system reset oops output then shows the register state of the IPI handler which is not what we want. I took the opportunity to add defines for all the various delays we have. There's no need for cpu_relax when we are doing an mdelay, so remove them too. Signed-off-by:
-
Anton Blanchard authored
I have an intermittent kdump fail where the hypervisor fails an H_EOI. As a result our CPPR is never reset to 0xff and we no longer accept interrupts. This patch calls icp_hv_set_cppr to reset the CPPR if H_EOI fails, fixing the kdump fail. Signed-off-by:
-
Anton Blanchard authored
We've had a 180 second panic timeout on ppc64 for as long as I can remember. This patch reduces it to 10 seconds on pseries for a few reasons: - Almost all pseries machines have a hypervisor console so panic output will be available in a scrollback buffer. - The 180 seconds impacts our availability, users (other than kernel hackers) just want the box to come back around so it can continue its work. - I spend a lot of my life staring at the 180 second panic timeout. Many pseries machines take minutes to power cycle, so it's quicker to sit through the 180 seconds than it is to power cycle. Signed-off-by:
-
Anton Blanchard authored
Our die() code was based off a very old x86 version. Update it to mirror the current x86 code. Signed-off-by:
-
Anton Blanchard authored
Remove some unnecessary defines and fix some spelling mistakes. Signed-off-by:
-
Anton Blanchard authored
We can handle recursion caused by system reset by reusing the crash shutdown fault handler. Since we don't have an OS triggerable NMI, if all CPUs don't make it into kdump then we tell the user to issue a system reset. However if we have a panic timeout set we cannot wait forever and must continue the kdump. Signed-off-by:
-
Anton Blanchard authored
We have a lot of complicated logic that handles possible recursion between kdump and a system reset exception. We can solve this in a much simpler way using the same setjmp/longjmp tricks xmon does. As a first step, this patch removes the old system reset code. Signed-off-by:
-
