As per walk_page_range documentation, mmap lock should be acquired by the
caller before invoking walk_page_range. mmap_assert_locked gets triggered
without that. The details can be found here.

http://lists.infradead.org/pipermail/linux-riscv/2020-June/010335.html



Fixes: 395a21ff(riscv: add ARCH_HAS_SET_DIRECT_MAP support)
Signed-off-by: Atish Patra <atish.patra@wdc.com>
Reviewed-by: Michel Lespinasse <walken@google.com>
Reviewed-by: Zong Li <zong.li@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

As per the table 4.4 of version "20190608-Priv-MSU-Ratified" of the
RISC-V instruction set manual[0], the PTE permission bit combination of
"write+exec only" is reserved for future use. Hence, don't allow such
mapping request in mmap call.

An issue is been reported by David Abdurachmanov, that while running
stress-ng with "sysbadaddr" argument, RCU stalls are observed on RISC-V
specific kernel.

This issue arises when the stress-sysbadaddr request for pages with
"write+exec only" permission bits and then passes the address obtain
from this mmap call to various system call. For the riscv kernel, the
mmap call should fail for this particular combination of permission bits
since it's not valid.

[0]: http://dabbelt.com/~palmer/keep/riscv-isa-manual/riscv-privileged-20190608-1.pdf



Signed-off-by: Yash Shah <yash.shah@sifive.com>
Reported-by: David Abdurachmanov <david.abdurachmanov@gmail.com>
[Palmer: Refer to the latest ISA specification at the only link I could
find, and update the terminology.]
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

The argument passed to cmpxchg is not guaranteed to be sign
extended, but lr.w sign extends on RV64I. This makes cmpxchg
fail on clang built kernels when __old is negative.

To fix this, we just cast __old to long which sign extends on
RV64I. With this fix, clang built RISC-V kernels now boot.

Link: https://github.com/ClangBuiltLinux/linux/issues/867


Signed-off-by: Nathan Huckleberry <nhuck@google.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Pull more RISC-V updates from Palmer Dabbelt:

 - Kconfig select statements are now sorted alphanumerically

 - first-level interrupts are now handled via a full irqchip driver

 - CPU hotplug is fixed

 - vDSO calls now use the common vDSO infrastructure

* tag 'riscv-for-linus-5.8-mw1' of git://git.kernel.org/pub/scm/linux/kernel/git/riscv/linux:
  riscv: set the permission of vdso_data to read-only
  riscv: use vDSO common flow to reduce the latency of the time-related functions
  riscv: fix build warning of missing prototypes
  RISC-V: Don't mark init section as non-executable
  RISC-V: Force select RISCV_INTC for CONFIG_RISCV
  RISC-V: Remove do_IRQ() function
  clocksource/drivers/timer-riscv: Use per-CPU timer interrupt
  irqchip: RISC-V per-HART local interrupt controller driver
  RISC-V: Rename and move plic_find_hart_id() to arch directory
  RISC-V: self-contained IPI handling routine
  RISC-V: Sort select statements alphanumerically

Pull arm64 fixes from Will Deacon:
 "arm64 fixes that came in during the merge window.

  There will probably be more to come, but it doesn't seem like it's
  worth me sitting on these in the meantime.

   - Fix SCS debug check to report max stack usage in bytes as advertised

   - Fix typo: CONFIG_FTRACE_WITH_REGS => CONFIG_DYNAMIC_FTRACE_WITH_REGS

   - Fix incorrect mask in HiSilicon L3C perf PMU driver

   - Fix compat vDSO compilation under some toolchain configurations

   - Fix false UBSAN warning from ACPI IORT parsing code

   - Fix booting under bootloaders that ignore TEXT_OFFSET

   - Annotate debug initcall function with '__init'"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux:
  arm64: warn on incorrect placement of the kernel by the bootloader
  arm64: acpi: fix UBSAN warning
  arm64: vdso32: add CONFIG_THUMB2_COMPAT_VDSO
  drivers/perf: hisi: Fix wrong value for all counters enable
  arm64: ftrace: Change CONFIG_FTRACE_WITH_REGS to CONFIG_DYNAMIC_FTRACE_WITH_REGS
  arm64: debug: mark a function as __init to save some memory
  scs: Report SCS usage in bytes rather than number of entries

Pull m68knommu updates from Greg Ungerer:

 - casting clean up in the user access macros

 - memory leak on error case fix for PCI probing

 - update of a defconfig

* tag 'm68knommu-for-v5.8' of git://git.kernel.org/pub/scm/linux/kernel/git/gerg/m68knommu:
  m68k,nommu: fix implicit cast from __user in __{get,put}_user_asm()
  m68k,nommu: add missing __user in uaccess' __ptr() macro
  m68k: Drop CONFIG_MTD_M25P80 in stmark2_defconfig
  m68k/PCI: Fix a memory leak in an error handling path

Pull mailbox updates from Jassi Brar:
 "qcom:
   - new controller driver for IPCC
   - reorg the of_device data
   - add support for ipq6018 platform

  spreadtrum:
   - new sprd controller driver

  imx:
   - implement suspend/resume PM support

  misc:
   - make pcc driver struct static
   - fix return value in imx_mu_scu
   - disable clock before bailout in imx probe
   - remove duplicate error mssg in zynqmp probe
   - fix header size in imx.scu
   - check for null instead of is-err in zynqmp"

* tag 'mailbox-v5.8' of git://git.linaro.org/landing-teams/working/fujitsu/integration:
  mailbox: qcom: Add ipq6018 apcs compatible
  mailbox: qcom: Add clock driver name in apcs mailbox driver data
  dt-bindings: mailbox: Add YAML schemas for QCOM APCS global block
  mailbox: imx: ONLY IPC MU needs IRQF_NO_SUSPEND flag
  mailbox: imx: Add runtime PM callback to handle MU clocks
  mailbox: imx: Add context save/restore for suspend/resume
  MAINTAINERS: Add entry for Qualcomm IPCC driver
  mailbox: Add support for Qualcomm IPCC
  dt-bindings: mailbox: Add devicetree binding for Qcom IPCC
  mailbox: zynqmp-ipi: Fix NULL vs IS_ERR() check in zynqmp_ipi_mbox_probe()
  mailbox: imx-mailbox: fix scu msg header size check
  mailbox: sprd: Add Spreadtrum mailbox driver
  dt-bindings: mailbox: Add the Spreadtrum mailbox documentation
  mailbox: ZynqMP IPI: Delete an error message in zynqmp_ipi_probe()
  mailbox: imx: Disable the clock on devm_mbox_controller_register() failure
  mailbox: imx: Fix return in imx_mu_scu_xlate()
  mailbox: imx: Support runtime PM
  mailbox: pcc: make pcc_mbox_driver static

Pull sound fixes from Takashi Iwai:
 "Here are last-minute fixes gathered before merge window close; a few
  fixes are for the core while the rest majority are driver fixes.

   - PCM locking annotation fixes and the possible self-lock fix

   - ASoC DPCM regression fixes with multi-CPU DAI

   - A fix for inconsistent resume from system-PM on USB-audio

   - Improved runtime-PM handling with multiple USB interfaces

   - Quirks for HD-audio and USB-audio

   - Hardened firmware handling in max98390 codec

   - A couple of fixes for meson"

* tag 'sound-fix-5.8-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: (21 commits)
  ASoC: rt5645: Add platform-data for Asus T101HA
  ASoC: Intel: bytcr_rt5640: Add quirk for Toshiba Encore WT10-A tablet
  ASoC: SOF: nocodec: conditionally set dpcm_capture/dpcm_playback flags
  ASoC: Intel: boards: replace capture_only by dpcm_capture
  ASoC: core: only convert non DPCM link to DPCM link
  ASoC: soc-pcm: dpcm: fix playback/capture checks
  ASoC: meson: add missing free_irq() in error path
  ALSA: pcm: disallow linking stream to itself
  ALSA: usb-audio: Manage auto-pm of all bundled interfaces
  ALSA: hda/realtek - add a pintbl quirk for several Lenovo machines
  ALSA: pcm: fix snd_pcm_link() lockdep splat
  ALSA: usb-audio: Use the new macro for HP Dock rename quirks
  ALSA: usb-audio: Add vendor, product and profile name for HP Thunderbolt Dock
  ALSA: emu10k1: delete an unnecessary condition
  dt-bindings: ASoc: Fix tdm-slot documentation spelling error
  ASoC: meson: fix memory leak of links if allocation of ldata fails
  ALSA: usb-audio: Fix inconsistent card PM state after resume
  ASoC: max98390: Fix potential crash during param fw loading
  ASoC: max98390: Fix incorrect printf qualifier
  ASoC: fsl-asoc-card: Defer probe when fail to find codec device
  ...

Pull drm fixes from Dave Airlie:
 "One sun4i fix and a connector hotplug race The ast fix is for a
  regression in 5.6, and one of the i915 ones fixes an oops reported by
  dhowells.

  core:
   - fix race in connectors sending hotplug

  i915:
   - Avoid use after free in cmdparser
   - Avoid NULL dereference when probing all display encoders
   - Fixup to module parameter type

  sun4i:
   - clock divider fix

  ast:
   - 24/32 bpp mode setting fix"

* tag 'drm-next-2020-06-11-1' of git://anongit.freedesktop.org/drm/drm:
  drm/ast: fix missing break in switch statement for format->cpp[0] case 4
  drm/sun4i: hdmi ddc clk: Fix size of m divider
  drm/i915/display: Only query DP state of a DDI encoder
  drm/i915/params: fix i915.reset module param type
  drm/i915/gem: Mark the buffer pool as active for the cmdparser
  drm/connector: notify userspace on hotplug after register complete

Pull NFS client updates from Anna Schumaker:
 "New features and improvements:
   - Sunrpc receive buffer sizes only change when establishing a GSS credentials
   - Add more sunrpc tracepoints
   - Improve on tracepoints to capture internal NFS I/O errors

  Other bugfixes and cleanups:
   - Move a dprintk() to after a call to nfs_alloc_fattr()
   - Fix off-by-one issues in rpc_ntop6
   - Fix a few coccicheck warnings
   - Use the correct SPDX license identifiers
   - Fix rpc_call_done assignment for BIND_CONN_TO_SESSION
   - Replace zero-length array with flexible array
   - Remove duplicate headers
   - Set invalid blocks after NFSv4 writes to update space_used attribute
   - Fix direct WRITE throughput regression"

* tag 'nfs-for-5.8-1' of git://git.linux-nfs.org/projects/anna/linux-nfs: (27 commits)
  NFS: Fix direct WRITE throughput regression
  SUNRPC: rpc_xprt lifetime events should record xprt->state
  xprtrdma: Make xprt_rdma_slot_table_entries static
  nfs: set invalid blocks after NFSv4 writes
  NFS: remove redundant initialization of variable result
  sunrpc: add missing newline when printing parameter 'auth_hashtable_size' by sysfs
  NFS: Add a tracepoint in nfs_set_pgio_error()
  NFS: Trace short NFS READs
  NFS: nfs_xdr_status should record the procedure name
  SUNRPC: Set SOFTCONN when destroying GSS contexts
  SUNRPC: rpc_call_null_helper() should set RPC_TASK_SOFT
  SUNRPC: rpc_call_null_helper() already sets RPC_TASK_NULLCREDS
  SUNRPC: trace RPC client lifetime events
  SUNRPC: Trace transport lifetime events
  SUNRPC: Split the xdr_buf event class
  SUNRPC: Add tracepoint to rpc_call_rpcerror()
  SUNRPC: Update the RPC_SHOW_SOCKET() macro
  SUNRPC: Update the rpc_show_task_flags() macro
  SUNRPC: Trace GSS context lifetimes
  SUNRPC: receive buffer size estimation values almost never change
  ...

Pull crypto fixes from Herbert Xu:
 "A number of fixes to the omap and nitrox drivers"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6:
  crypto: cavium/nitrox - Fix 'nitrox_get_first_device()' when ndevlist is fully iterated
  crypto: omap-sham - add proper load balancing support for multicore
  crypto: omap-aes - prevent unregistering algorithms twice
  crypto: omap-sham - fix very small data size handling
  crypto: omap-sham - huge buffer access fixes
  crypto: omap-crypto - fix userspace copied buffer access
  crypto: omap-sham - force kernel driver usage for sha algos
  crypto: omap-aes - avoid spamming console with self tests

Pull DAX updates part three from Darrick Wong:
 "Now that the xfs changes have landed, this third piece changes the
  FS_XFLAG_DAX ioctl code in xfs to request that the inode be reloaded
  after the last program closes the file, if doing so would make a S_DAX
  change happen. The goal here is to make dax access mode switching
  quicker when possible.

  Summary:

   - Teach XFS to ask the VFS to drop an inode if the administrator
     changes the FS_XFLAG_DAX inode flag such that the S_DAX state would
     change. This can result in files changing access modes without
     requiring an unmount cycle"

* tag 'vfs-5.8-merge-3' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux:
  fs/xfs: Update xfs_ioctl_setattr_dax_invalidate()
  fs/xfs: Combine xfs_diflags_to_linux() and xfs_diflags_to_iflags()
  fs/xfs: Create function xfs_inode_should_enable_dax()
  fs/xfs: Make DAX mount option a tri-state
  fs/xfs: Change XFS_MOUNT_DAX to XFS_MOUNT_DAX_ALWAYS
  fs/xfs: Remove unnecessary initialization of i_rwsem

I measured a 50% throughput regression for large direct writes.

The observed on-the-wire behavior is that the client sends every
NFS WRITE twice: once as an UNSTABLE WRITE plus a COMMIT, and once
as a FILE_SYNC WRITE.

This is because the nfs_write_match_verf() check in
nfs_direct_commit_complete() fails for every WRITE.

Buffered writes use nfs_write_completion(), which sets req->wb_verf
correctly. Direct writes use nfs_direct_write_completion(), which
does not set req->wb_verf at all. This leaves req->wb_verf set to
all zeroes for every direct WRITE, and thus
nfs_direct_commit_completion() always sets NFS_ODIRECT_RESCHED_WRITES.

This fix appears to restore nearly all of the lost performance.

Fixes: 1f28476d ("NFS: Fix O_DIRECT commit verifier handling")
Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Help troubleshoot the logic that uses these flags.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Fix the following sparse warning:

net/sunrpc/xprtrdma/transport.c:71:14: warning: symbol 'xprt_rdma_slot_table_entries'
was not declared. Should it be static?

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: Zou Wei <zou_wei@huawei.com>
Reviewed-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Use the following command to test nfsv4(size of file1M is 1MB):
mount -t nfs -o vers=4.0,actimeo=60 127.0.0.1/dir1 /mnt
cp file1M /mnt
du -h /mnt/file1M  -->0 within 60s, then 1M

When write is done(cp file1M /mnt), will call this:
nfs_writeback_done
  nfs4_write_done
    nfs4_write_done_cb
      nfs_writeback_update_inode
        nfs_post_op_update_inode_force_wcc_locked(change, ctime, mtime
nfs_post_op_update_inode_force_wcc_locked
   nfs_set_cache_invalid
   nfs_refresh_inode_locked
     nfs_update_inode

nfsd write response contains change, ctime, mtime, the flag will be
clear after nfs_update_inode. Howerver, write response does not contain
space_used, previous open response contains space_used whose value is 0,
so inode->i_blocks is still 0.

nfs_getattr  -->called by "du -h"
  do_update |= force_sync || nfs_attribute_cache_expired -->false in 60s
  cache_validity = READ_ONCE(NFS_I(inode)->cache_validity)
  do_update |= cache_validity & (NFS_INO_INVALID_ATTR    -->false
  if (do_update) {
        __nfs_revalidate_inode
  }

Within 60s, does not send getattr request to nfsd, thus "du -h /mnt/file1M"
is 0.

Add a NFS_INO_INVALID_BLOCKS flag, set it when nfsv4 write is done.

Fixes: 16e14375 ("NFS: More fine grained attribute tracking")
Signed-off-by: Zheng Bin <zhengbin13@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The variable result is being initialized with a value that is never read
and it is being updated later with a new value.  The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

When I cat parameter
'/sys/module/sunrpc/parameters/auth_hashtable_size', it displays as
follows. It is better to add a newline for easy reading.

[root@hulk-202 ~]# cat /sys/module/sunrpc/parameters/auth_hashtable_size
16[root@hulk-202 ~]#

Signed-off-by: Xiongfeng Wang <wangxiongfeng2@huawei.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

A short read can generate an -EIO error without there being an error
on the wire. This tracepoint acts as an eyecatcher when there is no
obvious I/O error.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

When sunrpc trace points are not enabled, the recorded task ID
information alone is not helpful.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Move the RPC_TASK_SOFTCONN flag into rpc_call_null_helper(). The
only minor behavior change is that it is now also set when
destroying GSS contexts.

This gives a better guarantee that gss_send_destroy_context() will
not hang for long if a connection cannot be established.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up.

All of rpc_call_null_helper() call sites assert RPC_TASK_SOFT, so
move that setting into rpc_call_null_helper() itself.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up.

Commit a52458b4 ("NFS/NFSD/SUNRPC: replace generic creds with
'struct cred'.") made rpc_call_null_helper() set RPC_TASK_NULLCREDS
unconditionally. Therefore there's no need for
rpc_call_null_helper()'s call sites to set RPC_TASK_NULLCREDS.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

The "create" tracepoint records parts of the rpc_create arguments,
and the shutdown tracepoint records when the rpc_clnt is about to
signal pending tasks and destroy auths.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Refactor: Hoist create/destroy/disconnect tracepoints out of
xprtrdma and into the generic RPC client. Some benefits include:

- Enable tracing of xprt lifetime events for the socket transport
  types

- Expose the different types of disconnect to help run down
  issues with lingering connections

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

To help tie the recorded xdr_buf to a particular RPC transaction,
the client side version of this class should display task ID
information and the server side one should show the request's XID.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Add a tracepoint in another common exit point for failing RPCs.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Clean up: remove unnecessary commas, and fix a white-space nit.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Recent additions to the RPC_TASK flags neglected to update
the tracepoint ENUM definitions.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Avoid unnecessary cache sloshing by placing the buffer size
estimation update logic behind an atomic bit flag.

The size of GSS information included in each wrapped Reply does
not change during the lifetime of a GSS context. Therefore, the
au_rslack and au_ralign fields need to be updated only once after
establishing a fresh GSS credential.

Thus a slack size update must occur after a cred is created,
duplicated, renewed, or expires. I'm not sure I have this exactly
right. A trace point is introduced to track updates to these
variables to enable troubleshooting the problem if I missed a spot.

Signed-off-by: Chuck Lever <chuck.lever@oracle.com>
Signed-off-by: Anna Schumaker <Anna.Schumaker@Netapp.com>

Pull nfsd updates from Bruce Fields:
 "Highlights:

   - Keep nfsd clients from unnecessarily breaking their own
     delegations.

     Note this requires a small kthreadd addition. The result is Tejun
     Heo's suggestion (see link), and he was OK with this going through
     my tree.

   - Patch nfsd/clients/ to display filenames, and to fix byte-order
     when displaying stateid's.

   - fix a module loading/unloading bug, from Neil Brown.

   - A big series from Chuck Lever with RPC/RDMA and tracing
     improvements, and lay some groundwork for RPC-over-TLS"

Link: https://lore.kernel.org/r/1588348912-24781-1-git-send-email-bfields@redhat.com

* tag 'nfsd-5.8' of git://linux-nfs.org/~bfields/linux: (49 commits)
  sunrpc: use kmemdup_nul() in gssp_stringify()
  nfsd: safer handling of corrupted c_type
  nfsd4: make drc_slab global, not per-net
  SUNRPC: Remove unreachable error condition in rpcb_getport_async()
  nfsd: Fix svc_xprt refcnt leak when setup callback client failed
  sunrpc: clean up properly in gss_mech_unregister()
  sunrpc: svcauth_gss_register_pseudoflavor must reject duplicate registrations.
  sunrpc: check that domain table is empty at module unload.
  NFSD: Fix improperly-formatted Doxygen comments
  NFSD: Squash an annoying compiler warning
  SUNRPC: Clean up request deferral tracepoints
  NFSD: Add tracepoints for monitoring NFSD callbacks
  NFSD: Add tracepoints to the NFSD state management code
  NFSD: Add tracepoints to NFSD's duplicate reply cache
  SUNRPC: svc_show_status() macro should have enum definitions
  SUNRPC: Restructure svc_udp_recvfrom()
  SUNRPC: Refactor svc_recvfrom()
  SUNRPC: Clean up svc_release_skb() functions
  SUNRPC: Refactor recvfrom path dealing with incomplete TCP receives
  SUNRPC: Replace dprintk() call sites in TCP receive path
  ...

Commit cfa7ede2 ("arm64: set TEXT_OFFSET to 0x0 in preparation for
removing it entirely") results in boot failures when booting kernels that
are built without KASLR support on broken bootloaders that ignore the
TEXT_OFFSET value passed via the header, and use the default of 0x80000
instead.

To work around this, turn CONFIG_RELOCATABLE on by default, even if KASLR
itself (CONFIG_RANDOMIZE_BASE) is turned off, and require CONFIG_EXPERT
to be enabled to deviate from this. Then, emit a warning into the kernel
log if we are not booting via the EFI stub (which is permitted to deviate
from the placement restrictions) and the kernel base address is not placed
according to the rules as laid out in Documentation/arm64/booting.rst.

Signed-off-by: Ard Biesheuvel <ardb@kernel.org>
Link: https://lore.kernel.org/r/20200611124330.252163-1-ardb@kernel.org


Signed-off-by: Will Deacon <will@kernel.org>

Merge tag 'drm-misc-next-fixes-2020-06-11' of git://anongit.freedesktop.org/drm/drm-misc

 into drm-next

In core, DRM connectors now notify userspace of hotplug events via
sysfs. In drivers, sun4i now uses 4 bits to store the clock's m divider;
ast sets up 24/32-bit color mode correctly.

Signed-off-by: Dave Airlie <airlied@redhat.com>

From: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200611075007.GA15098@linux-uq9g

Currently the switch statement for format->cpp[0] value 4 assigns
color_index which is never read again and then falls through to the
default case and returns. This looks like a missing break statement
bug. Fix this by adding a break statement.

Addresses-Coverity: ("Unused value")
Fixes: 259d14a7 ("drm/ast: Split ast_set_vbios_mode_info()")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Tested-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Thomas Zimmermann <tzimmermann@suse.de>
Link: https://patchwork.freedesktop.org/patch/msgid/20200610115804.1132338-1-colin.king@canonical.com

The Qualcomm ipq6018 has apcs block, add compatible for the same. Also,
the ipq6018 apcs provides a clock functionality similar to msm8916 but
the clock driver is different.

Create a child device based on the apcs compatible for the clock
controller functionality.

Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

Some apcs mailbox devices supports a clock driver, the compatible
strings of devices supporting clock driver along with the clock driver
name are maintained in a separate structure within the mailbox driver.
And the clock driver is added based on device match.

With increase in number of devices supporting the clock feature move the
clock driver name inside the driver data. so that we can use a single
API to get the register offset of mailbox driver and clock driver name
together, and the clock driver will be added based on the driver data.

Signed-off-by: Sivaprakash Murugesan <sivaprak@codeaurora.org>
Signed-off-by: Jassi Brar <jaswinder.singh@linaro.org>

The original vdso_data page is empty, so the permission of the vdso_data
page can be the same with the vdso text page. After introducing the vDSO
common flow, the vdso_data is not empty and the permission should be
changed to read-only.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>

Even if RISC-V has supported the vDSO feature, the latency of the functions
for obtaining the system time is still expensive. It is because these
functions still trigger a corresponding system call in the process, which
slows down the response time. If we want to remove the system call to
reduce the latency, the kernel should have the ability to output the system
clock information to userspace. This patch introduces the vDSO common flow
to enable the kernel to achieve the above feature and uses "rdtime"
instruction to obtain the current time in the user space. Under this
condition, the latency cost by the ecall from U-mode to S-mode can be
eliminated. After applying this patch, the latency of gettimeofday()
measured on the HiFive unleashed board can be reduced by %61.

Signed-off-by: Vincent Chen <vincent.chen@sifive.com>
Reviewed-by: Atish Patra <atish.patra@wdc.com>
Signed-off-by: Palmer Dabbelt <palmerdabbelt@google.com>