- Feb 09, 2016
-
-
Paolo Bonzini authored
Do for kvm_cpu_has_pending_timer and kvm_inject_pending_timer_irqs what the other irq.c routines have been doing. Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Usually the in-kernel APIC's existence is checked in the caller. Do not bother checking it again in lapic.c. Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Feng Wu authored
Add host irq information in trace event, so we can better understand which irq is in posted mode. Signed-off-by:
Feng Wu <feng.wu@intel.com> Reviewed-by:
Radim Krcmar <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Feng Wu authored
Use vector-hashing to deliver lowest-priority interrupts for VT-d posted-interrupts. This patch extends kvm_intr_is_single_vcpu() to support lowest-priority handling. Signed-off-by:
Feng Wu <feng.wu@intel.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Feng Wu authored
Use vector-hashing to deliver lowest-priority interrupts, As an example, modern Intel CPUs in server platform use this method to handle lowest-priority interrupts. Signed-off-by:
Feng Wu <feng.wu@intel.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Feng Wu authored
When the interrupt is not single destination any more, we need to change back IRTE to remapped mode explicitly. Signed-off-by:
Feng Wu <feng.wu@intel.com> Reviewed-by:
Radim Krčmář <rkrcmar@redhat.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
This is similar to the existing div_frac function, but it returns the remainder too. Unlike div_frac, it can be used to implement long division, e.g. (a << 64) / b for 32-bit a and b. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Jan 16, 2016
-
-
Dan Williams authored
To date, we have implemented two I/O usage models for persistent memory, PMEM (a persistent "ram disk") and DAX (mmap persistent memory into userspace). This series adds a third, DAX-GUP, that allows DAX mappings to be the target of direct-i/o. It allows userspace to coordinate DMA/RDMA from/to persistent memory. The implementation leverages the ZONE_DEVICE mm-zone that went into 4.3-rc1 (also discussed at kernel summit) to flag pages that are owned and dynamically mapped by a device driver. The pmem driver, after mapping a persistent memory range into the system memmap via devm_memremap_pages(), arranges for DAX to distinguish pfn-only versus page-backed pmem-pfns via flags in the new pfn_t type. The DAX code, upon seeing a PFN_DEV+PFN_MAP flagged pfn, flags the resulting pte(s) inserted into the process page tables with a new _PAGE_DEVMAP flag. Later, when get_user_pages() is walking ptes it keys off _PAGE_DEVMAP to pin the device hosting the page range active. Finally, get_page() and put_page() are modified to take references against the device driver established page mapping. Finally, this need for "struct page" for persistent memory requires memory capacity to store the memmap array. Given the memmap array for a large pool of persistent may exhaust available DRAM introduce a mechanism to allocate the memmap from persistent memory. The new "struct vmem_altmap *" parameter to devm_memremap_pages() enables arch_add_memory() to use reserved pmem capacity rather than the page allocator. This patch (of 18): The core has developed a need for a "pfn_t" type [1]. Move the existing pfn_t in KVM to kvm_pfn_t [2]. [1]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002199.html [2]: https://lists.01.org/pipermail/linux-nvdimm/2015-September/002218.html Signed-off-by:
Dan Williams <dan.j.williams@intel.com> Acked-by:
Christoffer Dall <christoffer.dall@linaro.org> Cc: Paolo Bonzini <pbonzini@redhat.com> Signed-off-by:
Andrew Morton <akpm@linux-foundation.org> Signed-off-by:
Linus Torvalds <torvalds@linux-foundation.org>
-
- Jan 12, 2016
-
-
Huaitong Han authored
vmx_cpuid_tries to update SECONDARY_VM_EXEC_CONTROL in the VMCS, but it will cause a vmwrite error on older CPUs because the code does not check for the presence of CPU_BASED_ACTIVATE_SECONDARY_CONTROLS. This will get rid of the following trace on e.g. Core2 6600: vmwrite error: reg 401e value 10 (err 12) Call Trace: [<ffffffff8116e2b9>] dump_stack+0x40/0x57 [<ffffffffa020b88d>] vmx_cpuid_update+0x5d/0x150 [kvm_intel] [<ffffffffa01d8fdc>] kvm_vcpu_ioctl_set_cpuid2+0x4c/0x70 [kvm] [<ffffffffa01b8363>] kvm_arch_vcpu_ioctl+0x903/0xfa0 [kvm] Fixes: feda805f Cc: stable@vger.kernel.org Reported-by:
Zdenek Kaspar <zkaspar82@gmail.com> Signed-off-by:
Huaitong Han <huaitong.han@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Jan 08, 2016
-
-
Andrey Smetanin authored
Trace the following Hyper SynIC timers events: * periodic timer start * one-shot timer start * timer callback * timer expiration and message delivery result * timer config setup * timer count setup * timer cleanup Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Trace the following Hyper SynIC events: * set msr * set sint irq * ack sint * sint irq eoi Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Consolidate updating the Hyper-V SynIC timers in a single place: on guest entry in processing KVM_REQ_HV_STIMER request. This simplifies the overall logic, and makes sure the most current state of msrs and guest clock is used for arming the timers (to achieve that, KVM_REQ_HV_STIMER has to be processed after KVM_REQ_CLOCK_UPDATE). Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
QEMU zero-inits Hyper-V SynIC vectors. We should allow that, and don't reject zero values if set by the host. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Hypervisor Function Specification(HFS) doesn't require to disable SynIC timer at timer config write if timer->count = 0. So drop this check, this allow to load timers MSR's during migration restore, because config are set before count in QEMU side. Also fix condition according to HFS doc(15.3.1): "It is not permitted to set the SINTx field to zero for an enabled timer. If attempted, the timer will be marked disabled (that is, bit 0 cleared) immediately." Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Split stimer_expiration() into two parts - timer expiration message sending and timer restart/cleanup based on timer state(config). This also fixes a bug where a one-shot timer message whose delivery failed once would get lost for good. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
This will be used in future to start Hyper-V SynIC timer in several places by one logic in one function. Changes v2: * drop stimer->count == 0 check inside stimer_start() * comment stimer_start() assumptions Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
The function stimer_stop() is called in one place so remove the function and replace it's call by function content. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Since the numbers now overlap, it makes sense to enumerate them in asm/kvm_host.h rather than linux/kvm_host.h. Functions that refer to architecture-specific requests are also moved to arch/. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Jan 07, 2016
-
-
Nicholas Krause authored
This makes sure the wall clock is updated only after an odd version value is successfully written to guest memory. Signed-off-by:
Nicholas Krause <xerofoify@gmail.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
While setting the KVM PIT counters in 'kvm_pit_load_count', if 'hpet_legacy_start' is set, the function disables the timer on channel[0], instead of the respective index 'channel'. This is because channels 1-3 are not linked to the HPET. Fix the caller to only activate the special HPET processing for channel 0. Reported-by:
P J P <pjp@fedoraproject.org> Fixes: 0185604c Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
David Matlack authored
The comment had the meaning of mmu.gva_to_gpa and nested_mmu.gva_to_gpa swapped. Fix that, and also add some details describing how each translation works. Signed-off-by:
David Matlack <dmatlack@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Dec 23, 2015
-
-
Thomas Gleixner authored
This reverts commit 677a73a9. This patch was not meant to be merged and has issues. Revert it. Requested-by:
Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Signed-off-by:
Thomas Gleixner <tglx@linutronix.de>
-
- Dec 22, 2015
-
-
Andrew Honig authored
Currently if userspace restores the pit counters with a count of 0 on channels 1 or 2 and the guest attempts to read the count on those channels, then KVM will perform a mod of 0 and crash. This will ensure that 0 values are converted to 65536 as per the spec. This is CVE-2015-7513. Signed-off-by:
Andy Honig <ahonig@google.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Virtual machines can be run with CPUID such that there are no MTRRs. In that case, the firmware will never enable MTRRs and it is obviously undesirable to run the guest entirely with UC memory. Check out guest CPUID, and use WB memory if MTRR do not exist. Cc: qemu-stable@nongnu.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Conversion of MTRRs to ranges used the maxphyaddr from the boot CPU. This is wrong, because var_mtrr_range's mask variable then is discontiguous (like FF00FFFF000, where the first run of 0s corresponds to the bits between host and guest maxphyaddr). Instead always set up the masks to be full 64-bit values---we know that the reserved bits at the top are zero, and we can restore them when reading the MSR. This way var_mtrr_range gets a mask that just works. Fixes: a13842dc Cc: qemu-stable@nongnu.org Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Alexis Dambricourt authored
This fixes the slow-down of VM running with pci-passthrough, since some MTRR range changed from MTRR_TYPE_WRBACK to MTRR_TYPE_UNCACHABLE. Memory in the 0K-640K range was incorrectly treated as uncacheable. Fixes: f7bfb57b Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=107561 Cc: qemu-stable@nongnu.org Signed-off-by:
Alexis Dambricourt <alexis.dambricourt@gmail.com> [Use correct BZ for "Fixes" annotation. - Paolo] Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Dec 18, 2015
-
-
Takuya Yoshikawa authored
Not just in order to clean up the code, but to make it faster by using enhanced instructions: the initialization became 20-30% faster on our testing machine. Signed-off-by:
Takuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Dec 16, 2015
-
-
Andrey Smetanin authored
It's possible that guest send us Hyper-V EOM at the middle of Hyper-V SynIC timer running, so we start processing of Hyper-V SynIC timers in vcpu context and stop the Hyper-V SynIC timer unconditionally: host guest ------------------------------------------------------------------------------ start periodic stimer start periodic timer timer expires after 15ms send expiration message into guest restart periodic timer timer expires again after 15 ms msg slot is still not cleared so setup ->msg_pending (1) restart periodic timer process timer msg and clear slot ->msg_pending was set: send EOM into host received EOM kvm_make_request(KVM_REQ_HV_STIMER) kvm_hv_process_stimers(): ... stimer_stop() if (time_now >= stimer->exp_time) stimer_expiration(stimer); Because the timer was rearmed at (1), time_now < stimer->exp_time and stimer_expiration is not called. The timer then never fires. The patch fixes such situation by not stopping Hyper-V SynIC timer at all, because it's safe to restart it without stop in vcpu context and timer callback always returns HRTIMER_NORESTART. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com> --- I am sending this as RFC because the error messages it produces are very ugly. Because of inlining, the original line is lost. The alternative is to change vmcs_read/write/checkXX into macros, but then you need to have a single huge BUILD_BUG_ON or BUILD_BUG_ON_MSG because multiple BUILD_BUG_ON* with the same __LINE__ are not supported well.
-
Paolo Bonzini authored
This was not printing the high parts of several 64-bit fields on 32-bit kernels. Separate from the previous one to make the patches easier to review. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Paolo Bonzini authored
In theory this should have broken EPT on 32-bit kernels (due to reading the high part of natural-width field GUEST_CR3). Not sure if no one noticed or the processor behaves differently from the documentation. Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Li RongQing authored
POSTED_INTR_NV is 16bit, should not use 64bit write function [ 5311.676074] vmwrite error: reg 3 value 0 (err 12) [ 5311.680001] CPU: 49 PID: 4240 Comm: qemu-system-i38 Tainted: G I 4.1.13-WR8.0.0.0_standard #1 [ 5311.689343] Hardware name: Intel Corporation S2600WT2/S2600WT2, BIOS SE5C610.86B.01.01.0008.021120151325 02/11/2015 [ 5311.699550] 00000000 00000000 e69a7e1c c1950de1 00000000 e69a7e38 fafcff45 fafebd24 [ 5311.706924] 00000003 00000000 0000000c b6a06dfa e69a7e40 fafcff79 e69a7eb0 fafd5f57 [ 5311.714296] e69a7ec0 c1080600 00000000 00000001 c0e18018 000001be 00000000 00000b43 [ 5311.721651] Call Trace: [ 5311.722942] [<c1950de1>] dump_stack+0x4b/0x75 [ 5311.726467] [<fafcff45>] vmwrite_error+0x35/0x40 [kvm_intel] [ 5311.731444] [<fafcff79>] vmcs_writel+0x29/0x30 [kvm_intel] [ 5311.736228] [<fafd5f57>] vmx_create_vcpu+0x337/0xb90 [kvm_intel] [ 5311.741600] [<c1080600>] ? dequeue_task_fair+0x2e0/0xf60 [ 5311.746197] [<faf3b9ca>] kvm_arch_vcpu_create+0x3a/0x70 [kvm] [ 5311.751278] [<faf29e9d>] kvm_vm_ioctl+0x14d/0x640 [kvm] [ 5311.755771] [<c1129d44>] ? free_pages_prepare+0x1a4/0x2d0 [ 5311.760455] [<c13e2842>] ? debug_smp_processor_id+0x12/0x20 [ 5311.765333] [<c10793be>] ? sched_move_task+0xbe/0x170 [ 5311.769621] [<c11752b3>] ? kmem_cache_free+0x213/0x230 [ 5311.774016] [<faf29d50>] ? kvm_set_memory_region+0x60/0x60 [kvm] [ 5311.779379] [<c1199fa2>] do_vfs_ioctl+0x2e2/0x500 [ 5311.783285] [<c11752b3>] ? kmem_cache_free+0x213/0x230 [ 5311.787677] [<c104dc73>] ? __mmdrop+0x63/0xd0 [ 5311.791196] [<c104dc73>] ? __mmdrop+0x63/0xd0 [ 5311.794712] [<c104dc73>] ? __mmdrop+0x63/0xd0 [ 5311.798234] [<c11a2ed7>] ? __fget+0x57/0x90 [ 5311.801559] [<c11a2f72>] ? __fget_light+0x22/0x50 [ 5311.805464] [<c119a240>] SyS_ioctl+0x80/0x90 [ 5311.808885] [<c1957d30>] sysenter_do_call+0x12/0x12 [ 5312.059280] kvm: zapping shadow pages for mmio generation wraparound [ 5313.678415] kvm [4231]: vcpu0 disabled perfctr wrmsr: 0xc2 data 0xffff [ 5313.726518] kvm [4231]: vcpu0 unhandled rdmsr: 0x570 Signed-off-by:
Li RongQing <roy.qing.li@gmail.com> Cc: Yang Zhang <yang.z.zhang@Intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Per Hyper-V specification (and as required by Hyper-V-aware guests), SynIC provides 4 per-vCPU timers. Each timer is programmed via a pair of MSRs, and signals expiration by delivering a special format message to the configured SynIC message slot and triggering the corresponding synthetic interrupt. Note: as implemented by this patch, all periodic timers are "lazy" (i.e. if the vCPU wasn't scheduled for more than the timer period the timer events are lost), regardless of the corresponding configuration MSR. If deemed necessary, the "catch up" mode (the timer period is shortened until the timer catches up) will be implemented later. Changes v2: * Use remainder to calculate periodic timer expiration time Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
The SynIC message protocol mandates that the message slot is claimed by atomically setting message type to something other than HVMSG_NONE. If another message is to be delivered while the slot is still busy, message pending flag is asserted to indicate to the guest that the hypervisor wants to be notified when the slot is released. To make sure the protocol works regardless of where the message sources are (kernel or userspace), clear the pending flag on SINT ACK notification, and let the message sources compete for the slot again. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
This helper will be used also in Hyper-V SynIC timers implementation. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
Andrey Smetanin authored
This rearrangement places functions declarations together according to their functionality, so future additions will be simplier. Signed-off-by:
Andrey Smetanin <asmetanin@virtuozzo.com> Reviewed-by:
Roman Kagan <rkagan@virtuozzo.com> CC: Gleb Natapov <gleb@kernel.org> CC: Paolo Bonzini <pbonzini@redhat.com> CC: "K. Y. Srinivasan" <kys@microsoft.com> CC: Haiyang Zhang <haiyangz@microsoft.com> CC: Vitaly Kuznetsov <vkuznets@redhat.com> CC: Roman Kagan <rkagan@virtuozzo.com> CC: Denis V. Lunev <den@openvz.org> CC: qemu-devel@nongnu.org Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Dec 14, 2015
-
-
Haozhong Zhang authored
The current handling of accesses to guest MSR_TSC_AUX returns error if vcpu does not support rdtscp, though those accesses are initiated by host. This can result in the reboot failure of some versions of QEMU. This patch fixes this issue by passing those host initiated accesses for further handling instead. Signed-off-by:
Haozhong Zhang <haozhong.zhang@intel.com> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-
- Dec 11, 2015
-
-
Paolo Bonzini authored
Invoking tracepoints within kvm_guest_enter/kvm_guest_exit causes a lockdep splat. Reported-by:
Borislav Petkov <bp@alien8.de> Signed-off-by:
Paolo Bonzini <pbonzini@redhat.com>
-